eqlGroupRecoveryTrimmerFreq
EQLGROUP-MIB ·
.1.3.6.1.4.1.12740.1.1.1.1.75
Object
This field defines the frequency (in seconds) that the system will scan for volumes that have been in the recovery bin past their lifetime. The default value is one scan every 24 hours.
Context
- MIB
- EQLGROUP-MIB
- OID
.1.3.6.1.4.1.12740.1.1.1.1.75- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eqlStorageGroupEntry
- Table
- eqlStorageGroupTable
- Siblings
- 79
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqlGroupId This index uniquely identifies the group. This index should always be 1. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.1.1.1.1.1 |
| eqlGroupDefaultSnapshotWarningLevel This field is used to specify by default when the administrator is warned that
the space used for SnapShots close to being exhausted. The default is 20%.
It can be overriden on a … | column | Integer32 | .1.3.6.1.4.1.12740.1.1.1.1.10 |
| eqlGroupDefaultSnapshotDeletePolicy This field specifies what should happen when the space reserved for SnapShots is exhuasted.
The default is delete-oldest SnapShot. | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.11 |
| eqlGroupTimeZone The field specifies the default timezone for the group
HST (GMT-10:00) Hawaiian Standard Time: Pacific/Honolulu,
AST (GMT-09:00) Alaskan Standard Time: America/Anch… | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.13 |
| eqlGroupLogLevel This field specifies the loglevel for the group. The log level
determines which messages are written to the console.
The following levels are supported. The value of
this objec… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.1.1.1.1.14 |
| eqlGroupDescription This field contains a use supplied description for the group. There is no default. | column | OctetString | .1.3.6.1.4.1.12740.1.1.1.1.15 |
| eqlGroupIscsiNamePrefix This field specifies the prefix for the iSCSI target names.
The default is iqn.2001-04.com.equallogic. This can be overriden on a per volume basis.
However the name must conform t… | column | OctetString | .1.3.6.1.4.1.12740.1.1.1.1.16 |
| eqlGroupDefaultAliasToVolumeName This field specifies whether or not to default the iSCSI alias to the name of the volume.
This can be overriden on a per volume basis.
The default is to set the iSCSI alias to the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.17 |
| eqlGroupEmailSrcDomain This field specifies the SNMP domain name used in the FROM email address in
generated email. e.g., everything after @ in foo@equallogic.com . | column | OctetString | .1.3.6.1.4.1.12740.1.1.1.1.18 |
| eqlGroupName This field specifies the Well Known Name for the group.
It must be a name which is resolvable by DNS. There is no default for Group Name. | column | OctetString | .1.3.6.1.4.1.12740.1.1.1.1.19 |
| eqlGroupIsSingleSubnet This field is used to indicate whether or not all the arrays
within a group are located in the same subset. The default is single-subnet. | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.2 |
| eqlGroupIpAddr This field is deprecated and will be unsupported in the next release. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.12740.1.1.1.1.20 |
| eqlGroupEnableWebAccessSSL This field specifies whether or not to allow web access to the group using https.
The default is TRUE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.21 |
| eqlGroupEnableWebAccessUnsecure This field specifies whether or not to allow web access to the group using http.
The default is TRUE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.22 |
| eqlGroupEnableCliAccessSSH This field specifies whether or not to allow ssh access to the group.
The default is TRUE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.23 |
| eqlGroupEnableCliAccessUnsecure This field specifies whether or not to allow telnet access to the group.
The default is FALSE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.24 |
| eqlGroupEnableEmailNotifications This field is used to specify whether to notify administrators on alarms via email.
The default is FALSE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.25 |
| eqlGroupEnableSNMPTraps This field is used to specify whether to notify administrators on alarms via SNMP TRAPS.
The default is FALSE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.26 |
| eqlGroupEnableSyslog This field is used to specify whether to notify administrators on alarms via syslog.
The default is FALSE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.27 |
| eqlGroupEmailPriorityMask This field is used to configure the type of events to be sent in email notifications.
The following type of events are supported.
info(4),
warning(8),
error(1… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.1.1.1.1.28 |
| eqlGroupSNMPPriorityMask deprecated This field is currently not being used. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.1.1.1.1.29 |
| eqlGroupDefaultGatewayIpAddress deprecated This field is deprecated. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.1.1.1.1.3 |
| eqlGroupSysLogPriorityMask This field is used to configure the type of events to be sent in syslog notifications.
The following type of events are supported.
info(4),
warning(8),
error(… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.1.1.1.1.30 |
| eqlGroupDefaultSite This field specifies the site where the volume resides.
Sites are defined on a per array basis.
Sites are used to define where primary and secondary copies of volume mirror reside… | column | OctetString | .1.3.6.1.4.1.12740.1.1.1.1.31 |
| eqlGroupPasswd1 An octet string containing the password to authenticate
members joining the group.
If written, it changes the password for
the account. If read, it returns a zero-length string. | column | OctetString | .1.3.6.1.4.1.12740.1.1.1.1.32 |
| eqlGroupPasswd2 This field is deprecated. | column | OctetString | .1.3.6.1.4.1.12740.1.1.1.1.33 |
| eqlGroupRowStatus Rowstatus | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.12740.1.1.1.1.34 |
| eqlGroupObjectReuseScrub deprecated If enabled, an object is zeroed out before reuse so that the new entity using the object will not be aware of the old contents of the object.
This field is deprecated and is unsup… | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.35 |
| eqlGroupEnableSSH deprecated This field is deprecated and will be unsupported in the next release. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.36 |
| eqlGroupEnableTelnet deprecated This field is deprecated and will be unsupported in the next release. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.37 |
| eqlGroupEnableFTP This field specifies whether or not to allow ftp access to the group.
The default is TRUE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.38 |
| eqlGroupEmailSrcUserName This field specifies user portion of the FROM email address used in generated
email. e.g., everything before @ in foo@equallogic.com . | column | OctetString | .1.3.6.1.4.1.12740.1.1.1.1.39 |
| eqlGroupDefaultMask This field is deprecated. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.12740.1.1.1.1.4 |
| eqlGroupSyslogFacility This field specifies the facility code which you would like applied
to all eqllog messages that are targeted at syslog. | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.40 |
| eqlGroupEnableCLB This field specifies whether or not to turn on Connection Load balancer.
The default is TRUE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.41 |
| eqlGroupEnableVolBal This field specifies whether or not to turn on volume balancing.
The default is TRUE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.42 |
| eqlGroupDiscoveryFilter If set to true, the list of volumes returned
during discovery is filtered based on
chap configuration in volume ACLs.
The default is FALSE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.43 |
| eqlGroupEmailSupportContact This field specifies the customer email address for support
to contact in the event of a system failure. Configuring
this field will enable each member to send an e-mail to
this … | column | OctetString | .1.3.6.1.4.1.12740.1.1.1.1.44 |
| eqlGroupReplicationWindowSize This field specifies the receiving window size of the tcp connection established to secondary site
during replication data transfer. Minimum value is 72KB.Maximum value is 2048KB. | column | KB SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.1.1.1.1.45 |
| eqlGroupConfigurationFlags This field defines the common place holder for group wide configuration flag. The flags must be of type
enable(1) or disable(0). and the default value will always be disable(0). | column | Bits | .1.3.6.1.4.1.12740.1.1.1.1.46 |
| eqlGroupISCSIPortalGrpTag A flag used internally by the iSCSI subsystem to determine the upgrade
history of this storage group and infer the default iSCSI Target Portal
Group ID. This value is changed inte… | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.47 |
| eqlGroupMaxConcurrentReplicas This field specifies the maximum number of replications that are transferring data at one time. The minimum
value is 1, the maximum value is 16, and the default value is 16. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.1.1.1.1.48 |
| eqlGroupDefaultThinWarn The default eqliscsiVolumeThinWarnPercentage value used when creating thin provisoned volumes. | column | Unsigned32 | .1.3.6.1.4.1.12740.1.1.1.1.49 |
| eqlGroupDefaultRoutingProtocol This field is used to indicate the routing protocol use when a group
spans multiple subnets. The support protocols are RIP and OFPS. The default value is none. | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.5 |
| eqlGroupDefaultThinMaxGrow The default eqliscsiVolumeThinMaxGrowPercentage value used when creating thin provisoned volumes. | column | Unsigned32 | .1.3.6.1.4.1.12740.1.1.1.1.50 |
| eqlGroupDefaultMgmtGatewayIpAddressType This field is used to indicate the default gateway for the management network.
This field contains the address of the local router used to forward network
traffic beyond the local… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.12740.1.1.1.1.51 |
| eqlGroupDefaultMgmtGatewayIpAddress This field is used to indicate the default gateway for the management network.
This field contains the address of the local router used to forward network
traffic beyond the local… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.12740.1.1.1.1.52 |
| eqlGroupInet6AddrType This field specifies the type of the IPv6 Well Known Address for the group.
This is the IPv6 address iSCSI Initiators will used to connect to the group. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.12740.1.1.1.1.53 |
| eqlGroupInet6Addr This field specifies the IPv6 Well Known Address for the group.
This is the IPv6 address iSCSI Initiators will used to connect to the group.
There is no default value for this fie… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.12740.1.1.1.1.54 |
| eqlGroupInetAddrType This field specifies the type of the IPv4 Well Known Address for the group.
This is the IPv4 address iSCSI Initiators will used to connect to the group. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.12740.1.1.1.1.55 |
| eqlGroupInetAddr This field specifies the IPv4 Well Known Address for the group.
This is the IPv4 address iSCSI Initiators will used to connect to the group.
There is no default value for this fie… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.12740.1.1.1.1.56 |
| eqlGroupSupportSlowSwitch This field is used to indicate
the slow switch support for the group. | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.57 |
| eqlGroupProfileIndex This field represents the profile identifier. | column | Unsigned32 | .1.3.6.1.4.1.12740.1.1.1.1.58 |
| eqlGroupEnableSSHProtocolV1 This field specifies whether or not the SSH service should support the V1 Protocol.
The default is TRUE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.59 |
| eqlGroupIsStorageOptimization This field is used to indicate whether the Storage Pool is optimized for
capacity (RAID 5/50) or performance (RAID 10). The default is capacity. | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.6 |
| eqlGroupEnableStandbyButton This field specifies if the standby button on the Pirates/Porfidio
enclosures will be enabled/disabled. The default is FALSE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.60 |
| eqlGroupLDAPLoginAuthEnable This field enables LDAP login authentication. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.61 |
| eqlGroupApplianceDiscovery | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.62 |
| eqlGroupDefaultDcbVlanId Default VLAN ID for DCB control packets on interfaces. | column | Unsigned32 | .1.3.6.1.4.1.12740.1.1.1.1.63 |
| eqlGroupThermalShutdownOverride This field specifies whether thermal shutdownn override is enabled or disabled. | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.64 |
| eqlGroupEnableLegacyCryptos This field specifies whether legacy crypto protocols should be enabled or not. This affects what protocols should be supported by applications such as SSH server, HTTPS server, L… | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.65 |
| eqlGroupMaxReplSegments This field specifies the maximum number of replica segments of 256K size per volume that are transferring data at one time. The minimum value is 1, the maximum value is 60, and t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.1.1.1.1.66 |
| eqlGroupEnableVolumeRecovery This field specifies whether or not the recoverable volume feature is enabled.
The default value is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.67 |
| eqlGroupSessionIdleTimeout This is the number of minutes a session may remain idle before being logged out for inactivty. The maximum timeout value is 24 hours or 1440 minutes. The minimum value is 1 minute… | column | minutes Integer32 | .1.3.6.1.4.1.12740.1.1.1.1.68 |
| eqlGroupSessionIdleTimeoutEnable Enable/disable the idle session timeout feature. The default is disabled. | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.69 |
| eqlGroupDiskAddWaitTime This field is used to indicated how long to wait in minutes before including newly
inserted drives into the RAID set. The delay allows for multiple drives to be
inserted before th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.1.1.1.1.7 |
| eqlGroupSessionBannerEnable Enable/disable the session banner feature. The default is disabled. | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.70 |
| eqlGroupDefaultVolSnapshotBorrowEnabled This field allows the user a way to change the default behavior of snapshot borrowing on new volume creates across the group. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.71 |
| eqlGroupRecoveryLifeTimeEnable This field enables or disables the lifetime that a deleted volume can remain in the recovery bin.
When enabled, a volume will be permanently deleted after the recovery lifetime in… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.1.1.1.1.72 |
| eqlGroupRecoveryLifeTime This field defines the amount of time (in seconds) that a deleted volume can remain in the
recovery bin before being permanently deleted by the system. The default value (0) is
o… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.1.1.1.1.73 |
| eqlGroupTimeProtocol This field specifies the active network time protocol. The value may be ntp(0) or sntp(1) with a default value of ntp(0). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.1.1.1.1.74 |
| eqlGroupUpdateEnable Enable/disable update available checking. | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.76 |
| eqlGroupUpdateLast The time of last update performed represented as the number of
seconds since the epoch. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.1.1.1.1.77 |
| eqlGroupDefaultSectorSize This field specifies, in bytes, the default volume sector size for this group. | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.78 |
| eqlGroupDefaultLanguage deprecated This field is deprecated. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.1.1.1.1.8 |
| eqlGroupCompressionScanFreq This index is the last assigned index value associated with VVol Volumes. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.1.1.1.1.80 |
| eqlGroupRunCompressionScan Enable/Disable the snapshot compression scanner. | column | Enumeration | .1.3.6.1.4.1.12740.1.1.1.1.81 |
| eqlGroupMonitorReminderTimestamp UTC timestamp when to display the monitoring connection reminder. 0 to
display immediately. 0x7fffffff to never display. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.1.1.1.1.82 |
| eqlGroupDefaultSnapshotSize This field is used to specify by default what percentage of a volume is reserved for SnapShots.
The default is 100%. It can be overriden on a per volume basis.
If a volume, testvo… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.1.1.1.1.9 |