ELTEX-VPC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

eltexVpcDomainConfigTable

table

.1.3.6.1.4.1.35265.125.1.1.2 · 1 row entry · 14 columns

Open in standard view

Uses the eltex variant from /opt/observium/mibs/eltex.

Command help

Walk eltexVpcDomainConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-VPC-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-VPC-MIB::eltexVpcDomainConfigTable'

VPC domain config table.

eltexVpcDomainConfigEntry row .1.3.6.1.4.1.35265.125.1.1.2.1

VPC domain config entry.

Indexes

eltexVpcDomainIndex

Column Syntax OID

eltexVpcDomainIndex

VPC Domain ID.

Unsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.35265.125.1.1.2.1.1

eltexVpcDomainPeerLink

To configures a port channel as the VPC peer link.
The configurable range is a valid port channel interface index.

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…

.1.3.6.1.4.1.35265.125.1.1.2.1.2

eltexVpcDomainKeepalivePriority

To configure the priority of the VPC switch. This value is used
for the VPC role election.
Note: The VPC switch with lower priority becomes the Primary. If
both the VPC peer switches have the same role priority, t…

Unsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.35265.125.1.1.2.1.3

eltexVpcDomainKeepaliveTimeout

To configure the peer keepalive timeout value (in seconds). If
an VPC switch does not receive keepalive messages from the peer
for this timeout value, it takes the decision to transition its
role (if required).
Note: Th…

Unsigned32r/w

Constraints:
range: 2-15

.1.3.6.1.4.1.35265.125.1.1.2.1.4

eltexVpcDomainKeepaliveMode

To start/stop the keepalive state machine on the VPC device, if
VPC is globally enabled.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.35265.125.1.1.2.1.5

eltexVpcDomainSystemMac

To configure the MAC address for the VPC domain. This mac-address
is used in the LACP PDUs and STP BPDUs
that are sent out on VPC member ports. For the VPC domain to use
the manually configured VPC MAC address, it sh…

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.35265.125.1.1.2.1.6

eltexVpcDomainSystemPriority

To configure the system priority for the VPC domain. This is used
in the STP BPDU sent out on VPC member ports. System-priority
should be configured same on both the VPC peers. If the configured
VPC system priority i…

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.35265.125.1.1.2.1.7

eltexVpcDomainPeerDetectionMode

To start/stop the dual control peer detection protocol on the
VPC switch.
The following options are supported:

Note: The peer VPC switch's IP address has to be configured for
the peer detection prot…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.35265.125.1.1.2.1.8

eltexVpcDomainPeerDetectionInterval

To configure the peer detection protocol transmission interval.
Configurable range is 200 to 4000 mseconds.

Unsigned32r/w

Constraints:
range: 200-4000

.1.3.6.1.4.1.35265.125.1.1.2.1.9

eltexVpcDomainPeerDetectionTimeout

To configure the peer detection protocol reception timeout.
Configurable range is 700 to 14000 mseconds.

Unsigned32r/w

Constraints:
range: 700-14000

.1.3.6.1.4.1.35265.125.1.1.2.1.10

eltexVpcDomainPeerIpAddr

To configure IP address of the peer VPC switch. This
configuration is used by the dual control plane detection
protocol on the VPC switches.

NOTE: In order to set value for the object, need to set values …

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.35265.125.1.1.2.1.11

eltexVpcDomainSourceIpAddr

To configure Self IP address of the VPC switch that is used as
the source IP by the dual control plane detection protocol
on the VPC switches.

NOTE: In order to set value for the object, need to set valu…

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.35265.125.1.1.2.1.12

eltexVpcDomainDcpdpUdpPort

To configure the UDP port on which the VPC switch listens to
the peer detection protocol messages.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.35265.125.1.1.2.1.13

eltexVpcDomainStatus

Status of VPC Domain.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.35265.125.1.1.2.1.14

eltexVpcGroupConfigTable

table

.1.3.6.1.4.1.35265.125.1.1.3 · 1 row entry · 6 columns

Open in standard view

Uses the eltex variant from /opt/observium/mibs/eltex.

Command help

Walk eltexVpcGroupConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-VPC-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-VPC-MIB::eltexVpcGroupConfigTable'

VPC group config table.

eltexVpcGroupConfigEntry row .1.3.6.1.4.1.35265.125.1.1.3.1

VPC status entry.

Indexes

eltexVpcGroupIndex

Column Syntax OID

eltexVpcGroupIndex

VPC group Index.

Unsigned32r/w

Constraints:
range: 1-63

.1.3.6.1.4.1.35265.125.1.1.3.1.1

eltexVpcGroupDomainIndex

VPC Domain Index uncluded Vpc Group

Unsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.35265.125.1.1.3.1.2

eltexVpcGroupPortChannelIfIndex

To configures a port channel as the VPC group member port.
The configurable range is a valid port channel interface index.

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.35265.125.1.1.3.1.3

eltexVpcGroupOperationalStatus

VPC operational status.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.35265.125.1.1.3.1.4

eltexVpcGroupInterfaceState

The following states of a VPC port-channel interface mean:
DISABLE: The state of a port-channel before VPC functionality is enabled on it.
WAIT: The VPC port-channel 'waits' for the VPC functionality
to …

Enumeration

Enumerated Values:

1	disabled
2	wait
3	error
4	active
5	inactive

.1.3.6.1.4.1.35265.125.1.1.3.1.5

eltexVpcGroupStatus

Status of VPC Group.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.35265.125.1.1.3.1.6

eltexVpcDomainStatusTable

table

.1.3.6.1.4.1.35265.125.1.2.1 · 1 row entry · 18 columns

Open in standard view

Uses the eltex variant from /opt/observium/mibs/eltex.

Command help

Walk eltexVpcDomainStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-VPC-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-VPC-MIB::eltexVpcDomainStatusTable'

VPC domain stats table.

eltexVpcDomainStatusEntry row .1.3.6.1.4.1.35265.125.1.2.1.1

VPC domain stats entry.

Indexes

eltexVpcDomainIndex

Column Syntax OID

eltexVpcDomainTotalVpcConfigured

Number of VPC's configured.

Column	Syntax	OID
eltexVpcDomainPeerDetectionEnabled Number of peer detection protocol enabled.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.125.1.2.4.1.2`
eltexVpcDomainPeerDetectionEnableFailure Number of peer detection protocol enabled errors.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.125.1.2.4.1.3`
eltexVpcDomainPeerDetectionDisabled Number of peer detection protocol disabled.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.125.1.2.4.1.4`
eltexVpcDomainPeerDetectionPeerTimeout Number of peer timeout detected.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.125.1.2.4.1.5`
eltexVpcDomainPeerDetectionPeerAdminDisable Number of peer detection protocol admin disabled.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.125.1.2.4.1.6`
eltexVpcDomainPeerDetectionTx Peer detection messages transmitted.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.125.1.2.4.1.7`
eltexVpcDomainPeerDetectionTxError Peer detection messages transmitted errors.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.125.1.2.4.1.8`
eltexVpcDomainPeerDetectionTxFdMsg Peer detection fast detect messages transmitted.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.125.1.2.4.1.9`
eltexVpcDomainPeerDetectionTxFdAckMsg Peer detection fast detect ack messages transmitted.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.125.1.2.4.1.10`
eltexVpcDomainPeerDetectionRx Peer detection messages received.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.125.1.2.4.1.11`
eltexVpcDomainPeerDetectionRxError Peer detection messages received errors.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.125.1.2.4.1.12`
eltexVpcDomainPeerDetectionRxFdMsg Peer detection fast detect messages received.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.125.1.2.4.1.13`
eltexVpcDomainPeerDetectionRxFdAckMsg Peer detection fast detect ack messages received.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.35265.125.1.2.4.1.14`

ELTEX-VPC-MIB Table View

eltexVpcDomainConfigTable

eltexVpcGroupConfigTable

eltexVpcDomainStatusTable

eltexVpcDomainPeerKeepAliveStatsTable

eltexVpcDomainPeerLinkStatsTable

eltexVpcDomainPeerDetectionStatsTable

eltexVpcMemberStatusTable