DSG-IF-MIB Table View

The Classifier Table contains attributes use to classify
inbound packets into the tunnel and classifiers for the DSG
clients, encoding in the DCD messages on the downstream
channels to which the classifiers apply.

dsgIfClassifierEntry row .1.3.6.1.4.1.4491.2.1.3.1.1.1.1

An entry in the Classifier Table. Rows are created
by an SNMP SET request setting the value of
dsgIfClassRowStatus to 'createAndGo'. Each entry is created
for a tunnel, index by dsgTunnelIndex.
Rows are deleted by an SN…

Indexes

dsgIfTunnelIndex dsgIfClassId

Column	Syntax	OID
dsgIfClassId The index that provides a unique classifier (in a DSG Agent). This value corresponds to the Classifier ID TLV in the DCD message.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.4491.2.1.3.1.1.1.1.1
dsgIfClassPriority The priority of this classifier. Default value 0 indicates lowest priority.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4491.2.1.3.1.1.1.1.2
dsgIfClassSrcIpAddrType The type of internet address of dsgIfClassSrcIpAddress.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4491.2.1.3.1.1.1.1.3
dsgIfClassSrcIpAddr The source IP address to be matched for this classifier. A value 0 for this object indicates a match of any IP address. A value that contains non-zero bits outside the range indicated by dsgIfClassSrcIpPrefixLength is i…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.4491.2.1.3.1.1.1.1.4
dsgIfClassSrcIpPrefixLength The length of the CIDR Prefix carried in dsgIfClassSrcIpAddr. In IPv4 addresses, a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. A length of 0…	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.4491.2.1.3.1.1.1.1.5
dsgIfClassDestIpAddressType The type of internet address of dsgIfClassDestIpAddress.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.4491.2.1.3.1.1.1.1.6
dsgIfClassDestIpAddress The destination IP address to be matched for this classifier.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.4491.2.1.3.1.1.1.1.7
dsgIfClassDestPortStart This is the inclusive lower bound of the transport-layer source port range that is to be matched.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.4491.2.1.3.1.1.1.1.8
dsgIfClassDestPortEnd This is the inclusive higher bound of the transport-layer source port range that is to be matched.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.4491.2.1.3.1.1.1.1.9
dsgIfClassRowStatus The status of the row. A value of active(1) indicates that this classifier is applied to this tunnel. A value of notInService(2) indicates that matching of the packets are ignored and this classifier parameters will not…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4491.2.1.3.1.1.1.1.10
dsgIfClassIncludeInDCD Indicates whether or not this DSG Classifier will be sent in DCD messages for use as a Layer-3 and Layer-4 packet filter by the DSG eCM.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4491.2.1.3.1.1.1.1.11

The DSG Tunnel Table contains group(s) of tunnel(s).
Each tunnel is associated to the destination MAC address.

dsgIfTunnelEntry row .1.3.6.1.4.1.4491.2.1.3.1.2.1.1

An entry in the DSG Tunnel Table. Rows are created by
an SNMP SET request setting the value of
dsgIfTunnelRowStatus to 'createAndGo'.
Each entry associated to a tunnel. A dsgIfTunnelGroupIndex
represents a group of tunn…

Indexes

dsgIfTunnelIndex

Column	Syntax	OID
dsgIfTunnelIndex The index into the DSG Tunnel table that represent a tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.2.1.1.1
dsgIfTunnelGroupIndex This index represents a group of tunnels that could be associated to one or more downstream which mapped to dsgIfTunnelGrpIndex.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.2.1.1.2
dsgIfTunnelClientIdListIndex This index represents a group of client id(s) which mapped to dsgIfClientIdListIndex.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.2.1.1.3
dsgIfTunnelMacAddress The DSG tunnel destination MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4491.2.1.3.1.2.1.1.4
dsgIfTunnelServiceClassName The Service Class Name that associated to the docsQosServiceClassName(in DOCS-QOS-MIB). Creation of a Service Class MUST be configured through the docsQosServiceClassTable. Only partial of the docsQosServiceClassTable o…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.4491.2.1.3.1.2.1.1.5
dsgIfTunnelRowStatus The status of the row. A value of notInService(2) indicates that this tunnel is disabled and no OOB traffic will be forwarded to DSG clients and this tunnel parameters will not be included in the DCD message.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4491.2.1.3.1.2.1.1.6

The DSG Tunnel Group to Channel Table associates a group
of tunnels to one or more downstream channel.

dsgIfTunnelGrpToChannelEntry row .1.3.6.1.4.1.4491.2.1.3.1.3.1.1

An entry in the DSG Tunnel Table. Rows are created by
an SNMP SET request setting the value of
dsgIfTunnelGrpRowStatus to 'createAndGo'.
Rows are deleted by an SNMP SET request setting the
value of dsgIfTunnelRowStatus …

Indexes

dsgIfTunnelGrpIndex dsgIfTunnelGrpChannelIndex

Column	Syntax	OID
dsgIfTunnelGrpIndex The index into this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.3.1.1.1
dsgIfTunnelGrpChannelIndex The index into this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.3.1.1.2
dsgIfTunnelGrpDsIfIndex The downstream ifIndex that will be associated to this group of tunnel(s).	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4491.2.1.3.1.3.1.1.3
dsgIfTunnelGrpRulePriority The DSG rule priority determines the order of which channel and its associated UCIDs should be applied by the DSG client. The default value is 0, which is the lowest priority.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4491.2.1.3.1.3.1.1.4
dsgIfTunnelGrpUcidList The list of Upstream Channel ID (UCID) values (octets) for which the DSG rule applies. A DSG client matches this parameter if its UCID value is included in the list. The default value of zero length string indicates tha…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.4491.2.1.3.1.3.1.1.5
dsgIfTunnelGrpVendorParamId The index of vendor parameter, dsgIfVendorParamId in the dsgIfVendorParamTable describing the vendor specific DSG parameters. If no associated entry in dsgIfVendorParamTable exists, this value is 0.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.3.1.1.6
dsgIfTunnelGrpRowStatus The status of this row. The value of notInService(2) indicates that this tunnel group is disabled and no OOB traffic on all the associated tunnel(s) will be forwarded to DSG clients and all parameters will not be includ…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4491.2.1.3.1.3.1.1.7

The DSG Downstream Table contains the associated timers,
vendor specific parameters index and the channel list
index to a specific downstream.

dsgIfDownstreamEntry row .1.3.6.1.4.1.4491.2.1.3.1.4.1.1

An entry in the DSG Downstream Table.
An entry in this table exists for each ifEntry with
an ifType of docsCableDownstream(128).

Indexes

IF-MIBifIndex

Column	Syntax	OID
dsgIfDownTimerIndex The index into the timer table, dsgIfTimerTable providing the timers used by the DSG client(s). The default value 0 indicates there is no associated timers that need to be sent in the DCD message.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.4.1.1.1
dsgIfDownVendorParamId The index of vendor parameter, dsgIfVendorParamId in the dsgIfVendorParamTable describing the vendor specific DSG parameters. If no associated entry in dsgIfVendorParamTable exists, this value is 0.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.4.1.1.2
dsgIfDownChannelListIndex The index of a the downstream frequency channel lists, dsgIfChannelListIndex in the dsgIfChannelListTable providing the list of downstream frequencies that contain DSG tunnels.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.4.1.1.3
dsgIfDownEnableDCD Used to enable or disable DCD messages to be sent on this downstream channel. The value is always true(1) for those downstreams that contains one or many DSG Tunnels.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4491.2.1.3.1.4.1.1.4

The Client Identification Table contains the client
identification type and value. It also contains the
vendor specific parameter identification. There could
be multiple client ids associated to a tunnel, grouped
by the dsgIfClientIdListIndex.

dsgIfClientIdEntry row .1.3.6.1.4.1.4491.2.1.3.1.5.1.1

An entry in the Client Id Table. Rows are created
by an SNMP SET request setting the value of
dsgIfClientRowStatus to 'createAndGo'.
Rows are deleted by an SNMP SET request setting the
value of dsgIfClientIdRowStatus to…

Indexes

dsgIfClientIdListIndex dsgIfClientIdIndex

Column	Syntax	OID
dsgIfClientIdListIndex The index to this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.5.1.1.1
dsgIfClientIdIndex The index to each entry of the Client Id.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.5.1.1.2
dsgIfClientIdType The Client Identification type. A DSG client id of type broadcast(1) received by all DSG client(s). A DSG client id of type macAddress(2) is received by the DSG client that has been assigned with this MAC address where …	Enumerationr/w Enumerated Values: 1 broadcast 2 macAddress 3 caSystemId 4 applicationId	.1.3.6.1.4.1.4491.2.1.3.1.5.1.1.3
dsgIfClientIdValue The Client Identification Value. The content depends on the value of the dsgIfClientIdType. The dsgIfClientIdType of a type broadcast(1), the value is empty string. The type of macAddress(2), the value represents the we…	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.4491.2.1.3.1.5.1.1.4
dsgIfClientVendorParamId The index of the vendor parameter id, dsgIfVendorParamId in the dsgIfVendorParamTable describing the vendor specific DSG parameters. If no associated entry in dsgIfVendorParamTable exists, this value is 0.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.5.1.1.5
dsgIfClientRowStatus The status of the row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4491.2.1.3.1.5.1.1.6

The DSG Vendor Parameter Table allows vendors to send
specific parameters to the DSG clients within a DSG
rule or within the DSG Configuration block in a
DCD message.

dsgIfVendorParamEntry row .1.3.6.1.4.1.4491.2.1.3.1.5.2.1

An entry in the DSG Vendor Parameter Table. Rows are
created by an SNMP SET request setting the value of
dsgIfVendorRowStatus to 'createAndGo'. Each entry
represents one or more vendor??s specific parameters.
Rows are d…

Indexes

dsgIfVendorParamId dsgIfVendorIndex

Column	Syntax	OID
dsgIfVendorParamId The index of the table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.5.2.1.1
dsgIfVendorIndex The Vendor Specific Index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.5.2.1.2
dsgIfVendorOUI The Vendor assigned Organization Unique Id (OUI).	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.4491.2.1.3.1.5.2.1.3
dsgIfVendorValue The Vendor Specific Parameter Value.	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.4491.2.1.3.1.5.2.1.4
dsgIfVendorRowStatus The status of the row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4491.2.1.3.1.5.2.1.5

The DSG Channel List Table contains list of one or
multiple downstream frequencies that are carrying DSG
tunnel(s).

dsgIfChannelListEntry row .1.3.6.1.4.1.4491.2.1.3.1.5.3.1

An entry in the DSG Channel List Table. Rows are
created by an SNMP SET request setting the value of
dsgIfChannelRowStatus to 'createAndGo'.
Rows are deleted by an SNMP SET request setting the value
of dsgIfChannelRowSt…

Indexes

dsgIfChannelListIndex dsgIfChannelIndex

Column	Syntax	OID
dsgIfChannelListIndex The index to this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.5.3.1.1
dsgIfChannelIndex The index for each downstream frequency that contains the DSG tunnel(s).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.5.3.1.2
dsgIfChannelDsFreq The DOCSIS downstream center frequency. The receive frequency MUST be a multiple of 62500Hz.	hertzInteger32r/w Constraints: range: 0-1000000000	.1.3.6.1.4.1.4491.2.1.3.1.5.3.1.3
dsgIfChannelRowStatus The status of the row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4491.2.1.3.1.5.3.1.4

The DSG Timer Table contains timers that are sent to
the DSG client(s) via the DCD message.

dsgIfTimerEntry row .1.3.6.1.4.1.4491.2.1.3.1.5.4.1

An entry in the DSG Timer Table. Rows are created
by an SNMP SET request setting the value of
dsgIfTimerRowStatus to 'createAndGo'.
Rows are deleted by an SNMP SET request setting the value
of dsgIfTimerRowStatus to 'de…

Indexes

dsgIfTimerIndex

Column	Syntax	OID
dsgIfTimerIndex The index to this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.1.3.1.5.4.1.1
dsgIfTimerTdsg1 Initialization Timeout. This is the timeout period for the DSG packets during initialization of the DSG client. The default value is 2 seconds.	secondUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.4491.2.1.3.1.5.4.1.2
dsgIfTimerTdsg2 Operational Timeout. This is the timeout period for the DSG packets during normal operation of the DSG client. Default value is 10 minutes.	secondUnsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.4491.2.1.3.1.5.4.1.3
dsgIfTimerTdsg3 Two-way retry timer. This is the retry timer that determines when the DSG client attempts to reconnect with the DSG Agent and established two-way connectivity. Default value is 5 minutes. The value 0 indicates that the …	secondUnsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.4491.2.1.3.1.5.4.1.4
dsgIfTimerTdsg4 One-way retry timer. The retry timer that determines when the client attempts to rescan for a DOCSIS downstream channel that contains DSG packets after a dsgIfTimerTdsg1 or dsgIfTimerTdsg2 timeout. Default value is 30 m…	secondUnsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.4491.2.1.3.1.5.4.1.5
dsgIfTimerRowStatus The status of the row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4491.2.1.3.1.5.4.1.6

The IF Tunnel Downstream Stats Table contains the packet and
byte counters for the tunnel. It also contains the DSID used by
the tunnel traffic.

dsgIfTunnelDsStatsEntry row .1.3.6.1.4.1.4491.2.1.3.1.6.1.1

An entry in the DSG IF Tunnel Downstream Stats Table. An entry
in this table exists for each dsgIfTunnelIndex and an ifIndex of
docsCableDownstream(128).

Indexes

dsgIfTunnelIndex IF-MIBifIndex

Column	Syntax	OID
dsgIfTunnelDsStatsPkts This attribute indicates the count of the number of packets transmitted in this tunnel	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4491.2.1.3.1.6.1.1.1
dsgIfTunnelDsStatsOctets This attribute indicates the count of the number of octets transmitted in this tunnel	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4491.2.1.3.1.6.1.1.2
dsgIfTunnelDsStatsDsid When operating with Multicast DSID Forwarding (MDF) enabled, this object contains the DSID value with which the CMTS labels the DSG Tunnel traffic. If no DSID has been created for this tunnel then this object returns 0.…	Unsigned32 Constraints: range: 0-1048575	.1.3.6.1.4.1.4491.2.1.3.1.6.1.1.3