DIAL-CONTROL-MIB Table View

The list of peers from which the managed device
will accept calls or to which it will place them.

dialCtlPeerCfgEntry row .1.3.6.1.2.1.10.21.1.2.1.1

Configuration data for a single Peer. This entry is
effectively permanent, and contains information
to identify the peer, how to connect to the peer,
how to identify the peer and its permissions.
The value of dialCtlPee…

Indexes

dialCtlPeerCfgId IF-MIBifIndex

Column	Syntax	OID
dialCtlPeerCfgId This object identifies a single peer. There may be several entries in this table for one peer, defining different ways of reaching this peer. Thus, there may be several entries in this table with the same value of dialC…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.10.21.1.2.1.1.1
dialCtlPeerCfgIfType The interface type to be used for calling this peer. In case of ISDN, the value of isdn(63) is to be used.	IANAifType-MIBIANAifTyper/w Type Values: 1 other 2 regular1822 3 hdh1822 4 ddnX25 5 rfc877x25 6 ethernetCsmacd 7 iso88023Csmacd 8 iso88024TokenBus 9 iso88025TokenRing 10 iso88026Man 11 starLan 12 proteon10Mbit 13 proteon80Mbit 14 hyperchannel 15 fddi 16 lapb 17 sdlc 18 ds1 19 e1 20 basicISDN 21 primaryISDN 22 propPointToPointSerial 23 ppp 24 softwareLoopback 25 eon 26 ethernet3Mbit 27 nsip 28 slip 29 ultra 30 ds3 31 sip 32 frameRelay 33 rs232 34 para 35 arcnet 36 arcnetPlus 37 atm 38 miox25 39 sonet 40 x25ple 41 iso88022llc 42 localTalk 43 smdsDxi 44 frameRelayService 45 v35 46 hssi 47 hippi 48 modem 49 aal5 50 sonetPath 51 sonetVT 52 smdsIcip 53 propVirtual 54 propMultiplexor 55 ieee80212 56 fibreChannel 57 hippiInterface 58 frameRelayInterconnect 59 aflane8023 60 aflane8025 61 cctEmul 62 fastEther 63 isdn 64 v11 65 v36 66 g703at64k 67 g703at2mb 68 qllc 69 fastEtherFX 70 channel 71 ieee80211 72 ibm370parChan 73 escon 74 dlsw 75 isdns 76 isdnu 77 lapd 78 ipSwitch 79 rsrb 80 atmLogical 81 ds0 82 ds0Bundle 83 bsc 84 async 85 cnr 86 iso88025Dtr 87 eplrs 88 arap 89 propCnls 90 hostPad 91 termPad 92 frameRelayMPI 93 x213 94 adsl 95 radsl 96 sdsl 97 vdsl 98 iso88025CRFPInt 99 myrinet 100 voiceEM 101 voiceFXO 102 voiceFXS 103 voiceEncap 104 voiceOverIp 105 atmDxi 106 atmFuni 107 atmIma 108 pppMultilinkBundle 109 ipOverCdlc 110 ipOverClaw 111 stackToStack 112 virtualIpAddress 113 mpc 114 ipOverAtm 115 iso88025Fiber 116 tdlc 117 gigabitEthernet 118 hdlc 119 lapf 120 v37 121 x25mlp 122 x25huntGroup 123 transpHdlc 124 interleave 125 fast 126 ip 127 docsCableMaclayer 128 docsCableDownstream 129 docsCableUpstream 130 a12MppSwitch 131 tunnel 132 coffee 133 ces 134 atmSubInterface 135 l2vlan 136 l3ipvlan 137 l3ipxvlan 138 digitalPowerline 139 mediaMailOverIp 140 dtm 141 dcn 142 ipForward 143 msdsl 144 ieee1394 145 if-gsn 146 dvbRccMacLayer 147 dvbRccDownstream 148 dvbRccUpstream 149 atmVirtual 150 mplsTunnel 151 srp 152 voiceOverAtm 153 voiceOverFrameRelay 154 idsl 155 compositeLink 156 ss7SigLink 157 propWirelessP2P 158 frForward 159 rfc1483 160 usb 161 ieee8023adLag 162 bgppolicyaccounting 163 frf16MfrBundle 164 h323Gatekeeper 165 h323Proxy 166 mpls 167 mfSigLink 168 hdsl2 169 shdsl 170 ds1FDL 171 pos 172 dvbAsiIn 173 dvbAsiOut 174 plc 175 nfas 176 tr008 177 gr303RDT 178 gr303IDT 179 isup 180 propDocsWirelessMaclayer 181 propDocsWirelessDownstream 182 propDocsWirelessUpstream 183 hiperlan2 184 propBWAp2Mp 185 sonetOverheadChannel 186 digitalWrapperOverheadChannel 187 aal2 188 radioMAC 189 atmRadio 190 imt 191 mvl 192 reachDSL 193 frDlciEndPt 194 atmVciEndPt 195 opticalChannel 196 opticalTransport 197 propAtm 198 voiceOverCable 199 infiniband 200 teLink 201 q2931 202 virtualTg 203 sipTg 204 sipSig 205 docsCableUpstreamChannel 206 econet 207 pon155 208 pon622 209 bridge 210 linegroup 211 voiceEMFGD 212 voiceFGDEANA 213 voiceDID 214 mpegTransport 215 sixToFour 216 gtp 217 pdnEtherLoop1 218 pdnEtherLoop2 219 opticalChannelGroup 220 homepna 221 gfp 222 ciscoISLvlan 223 actelisMetaLOOP 224 fcipLink 225 rpr 226 qam 227 lmp 228 cblVectaStar 229 docsCableMCmtsDownstream 230 adsl2 231 macSecControlledIF 232 macSecUncontrolledIF 233 aviciOpticalEther 234 atmbond 235 voiceFGDOS 236 mocaVersion1 237 ieee80216WMAN 238 adsl2plus 239 dvbRcsMacLayer 240 dvbTdm 241 dvbRcsTdma 242 x86Laps 243 wwanPP 244 wwanPP2 245 voiceEBS 246 ifPwType 247 ilan 248 pip 249 aluELP 250 gpon 251 vdsl2 252 capwapDot11Profile 253 capwapDot11Bss 254 capwapWtpVirtualRadio 255 bits 256 docsCableUpstreamRfPort 257 cableDownstreamRfPort 258 vmwareVirtualNic 259 ieee802154 260 otnOdu 261 otnOtu 262 ifVfiType 263 g9981 264 g9982 265 g9983 266 aluEpon 267 aluEponOnu 268 aluEponPhysicalUni 269 aluEponLogicalLink 270 aluGponOnu 271 aluGponPhysicalUni 272 vmwareNicTeam 277 docsOfdmDownstream 278 docsOfdmaUpstream 279 gfast 280 sdci 281 xboxWireless 282 fastdsl 283 docsCableScte55d1FwdOob 284 docsCableScte55d1RetOob 285 docsCableScte55d2DsOob 286 docsCableScte55d2UsOob 287 docsCableNdf 288 docsCableNdr 289 ptm 290 ghn 291 otnOtsi 292 otnOtuc 293 otnOduc 294 otnOtsig 295 microwaveCarrierTermination 296 microwaveRadioLinkTerminal 297 ieee8021axDrni 298 ax25 299 ieee19061nanocom 300 cpri 301 omni 302 roe 303 p2pOverLan	.1.3.6.1.2.1.10.21.1.2.1.1.2
dialCtlPeerCfgLowerIf ifIndex value of an interface the peer will have to be called on. For example, on an ISDN interface, this can be the ifIndex value of a D channel or the ifIndex value of a B channel, whatever is appropriate for a given …	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.21.1.2.1.1.3
dialCtlPeerCfgOriginateAddress Call Address at which the peer will be called. Think of this as the set of characters following 'ATDT ' or the 'phone number' included in a D channel call request. The structure of this information will b…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.21.1.2.1.1.4
dialCtlPeerCfgAnswerAddress Calling Party Number information element, as for example passed in an ISDN SETUP message by a PBX or switch, for incoming calls. This address can be used to identify the peer. If this address is either unknown or identi…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.21.1.2.1.1.5
dialCtlPeerCfgSubAddress Subaddress at which the peer will be called. If the subaddress is undefined for the given media or unused, this is a zero length string.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.21.1.2.1.1.6
dialCtlPeerCfgClosedUserGroup Closed User Group at which the peer will be called. If the Closed User Group is undefined for the given media or unused, this is a zero length string.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.21.1.2.1.1.7
dialCtlPeerCfgSpeed The desired information transfer speed in bits/second when calling this peer. The detailed media specific information, e.g. information type and information transfer rate for ISDN circuits, has to be extracted from this…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.2.1.10.21.1.2.1.1.8
dialCtlPeerCfgInfoType The Information Transfer Capability to be used when calling this peer. speech(2) refers to a non-data connection, whereas audio31(6) and audio7(7) refer to data mode connections.	Enumerationr/w Enumerated Values: 1 other 2 speech 3 unrestrictedDigital 4 unrestrictedDigital56 5 restrictedDigital 6 audio31 7 audio7 8 video 9 packetSwitched 10 fax	.1.3.6.1.2.1.10.21.1.2.1.1.9
dialCtlPeerCfgPermission Applicable permissions. callback(4) either rejects the call and then calls back, or uses the 'Reverse charging' information element if it is available. Note that callback(4) is supposed to control charging, not security…	Enumerationr/w Enumerated Values: 1 originate 2 answer 3 both 4 callback 5 none	.1.3.6.1.2.1.10.21.1.2.1.1.10
dialCtlPeerCfgInactivityTimer The connection will be automatically disconnected if no longer carrying useful data for a time period, in seconds, specified in this object. Useful data in this context refers to forwarding packets, including routing in…	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.2.1.10.21.1.2.1.1.11
dialCtlPeerCfgMinDuration Minimum duration of a call in seconds, starting from the time the call is connected until the call is disconnected. This is to accomplish the fact that in most countries charging applies to units of time, which should b…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.2.1.10.21.1.2.1.1.12
dialCtlPeerCfgMaxDuration Maximum call duration in seconds. Zero means 'unlimited'.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.2.1.10.21.1.2.1.1.13
dialCtlPeerCfgCarrierDelay The call timeout time in seconds. The default value of zero means that the call timeout as specified for the media in question will apply.	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.2.1.10.21.1.2.1.1.14
dialCtlPeerCfgCallRetries The number of calls to a non-responding address that may be made. A retry count of zero means there is no bound. The intent is to bound the number of successive calls to an address which is inaccessible, or which refuse…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.2.1.10.21.1.2.1.1.15
dialCtlPeerCfgRetryDelay The time in seconds between call retries if a peer cannot be reached. A value of zero means that call retries may be done without any delay.	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.2.1.10.21.1.2.1.1.16
dialCtlPeerCfgFailureDelay The time in seconds after which call attempts are to be placed again after a peer has been noticed to be unreachable, i.e. after dialCtlPeerCfgCallRetries unsuccessful call attempts. A value of zero means that a peer wi…	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.2.1.10.21.1.2.1.1.17
dialCtlPeerCfgTrapEnable This object indicates whether dialCtlPeerCallInformation and dialCtlPeerCallSetup traps should be generated for this peer.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.10.21.1.2.1.1.18
dialCtlPeerCfgStatus Status of one row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.21.1.2.1.1.19

Statistics information for each peer entry.
There will be one entry in this table for each entry
in the dialCtlPeerCfgTable.

dialCtlPeerStatsEntry row .1.3.6.1.2.1.10.21.1.2.2.1

Statistics information for a single Peer. This entry
is effectively permanent, and contains information
describing the last call attempt as well as supplying
statistical information.

Indexes

No indexes recorded

Column	Syntax	OID
dialCtlPeerStatsConnectTime Accumulated connect time to the peer since system startup. This is the total connect time, i.e. the connect time for outgoing calls plus the time for incoming calls.	secondsAbsoluteCounter32	.1.3.6.1.2.1.10.21.1.2.2.1.1
dialCtlPeerStatsChargedUnits The total number of charging units applying to this peer since system startup. Only the charging units applying to the local interface, i.e. for originated calls or for calls with 'Reverse charging' being active, will b…	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.2.2.1.2
dialCtlPeerStatsSuccessCalls Number of completed calls to this peer.	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.2.2.1.3
dialCtlPeerStatsFailCalls Number of failed call attempts to this peer since system startup.	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.2.2.1.4
dialCtlPeerStatsAcceptCalls Number of calls from this peer accepted since system startup.	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.2.2.1.5
dialCtlPeerStatsRefuseCalls Number of calls from this peer refused since system startup.	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.2.2.1.6
dialCtlPeerStatsLastDisconnectCause The encoded network cause value associated with the last call. This object will be updated whenever a call is started or cleared. The value of this object will depend on the interface type as well as on the protocol and…	OctetString Constraints: range: 0-4	.1.3.6.1.2.1.10.21.1.2.2.1.7
dialCtlPeerStatsLastDisconnectText ASCII text describing the reason for the last call termination. This object exists because it would be impossible for a management station to store all possible cause values for all types of interfaces. I…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.21.1.2.2.1.8
dialCtlPeerStatsLastSetupTime The value of sysUpTime when the last call to this peer was started. For ISDN media, this will be the time when the setup message was received from or sent to the network. This object will be updated whenever a call is s…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.21.1.2.2.1.9

A table containing information about active
calls to a specific destination.

callActiveEntry row .1.3.6.1.2.1.10.21.1.3.1.1

The information regarding a single active Connection.
An entry in this table will be created when a call is
started. An entry in this table will be deleted when
an active call clears.

Indexes

callActiveSetupTime callActiveIndex

Column	Syntax	OID
callActiveSetupTime The value of sysUpTime when the call associated to this entry was started. This will be useful for an NMS to retrieve all calls after a specific time. Also, this object can be useful in finding large delays between the …	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.21.1.3.1.1.1
callActiveIndex Small index variable to distinguish calls that start in the same hundredth of a second.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.10.21.1.3.1.1.2
callActivePeerAddress The number this call is connected to. If the number is not available, then it will have a length of zero.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.21.1.3.1.1.3
callActivePeerSubAddress The subaddress this call is connected to. If the subaddress is undefined or not available, this will be a zero length string.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.21.1.3.1.1.4
callActivePeerId This is the Id value of the peer table entry to which this call was made. If a peer table entry for this call does not exist or is unknown, the value of this object will be zero.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.2.1.10.21.1.3.1.1.5
callActivePeerIfIndex This is the ifIndex value of the peer table entry to which this call was made. If a peer table entry for this call does not exist or is unknown, the value of this object will be zero.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.2.1.10.21.1.3.1.1.6
callActiveLogicalIfIndex This is the ifIndex value of the logical interface through which this call was made. For ISDN media, this would be the ifIndex of the B channel which was used for this call. If the ifIndex value is unknown, the value of…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.21.1.3.1.1.7
callActiveConnectTime The value of sysUpTime when the call was connected. If the call is not connected, this object will have a value of zero.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.21.1.3.1.1.8
callActiveCallState The current call state. unknown(1) - The call state is unknown. connecting(2) - A connection attempt (outgoing call) is being made. connected(3) - An incoming call is in the process …	Enumeration Enumerated Values: 1 unknown 2 connecting 3 connected 4 active	.1.3.6.1.2.1.10.21.1.3.1.1.9
callActiveCallOrigin The call origin.	Enumeration Enumerated Values: 1 originate 2 answer 3 callback	.1.3.6.1.2.1.10.21.1.3.1.1.10
callActiveChargedUnits The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the value of this object will be zero.	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.3.1.1.11
callActiveInfoType The information type for this call.	Enumeration Enumerated Values: 1 other 2 speech 3 unrestrictedDigital 4 unrestrictedDigital56 5 restrictedDigital 6 audio31 7 audio7 8 video 9 packetSwitched 10 fax	.1.3.6.1.2.1.10.21.1.3.1.1.12
callActiveTransmitPackets The number of packets which were transmitted for this call.	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.3.1.1.13
callActiveTransmitBytes The number of bytes which were transmitted for this call.	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.3.1.1.14
callActiveReceivePackets The number of packets which were received for this call.	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.3.1.1.15
callActiveReceiveBytes The number of bytes which were received for this call.	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.3.1.1.16

A table containing information about specific
calls to a specific destination.

callHistoryEntry row .1.3.6.1.2.1.10.21.1.4.3.1

The information regarding a single Connection.

Indexes

callActiveSetupTime callActiveIndex

Column	Syntax	OID
callHistoryPeerAddress The number this call was connected to. If the number is not available, then it will have a length of zero.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.21.1.4.3.1.1
callHistoryPeerSubAddress The subaddress this call was connected to. If the subaddress is undefined or not available, this will be a zero length string.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.21.1.4.3.1.2
callHistoryPeerId This is the Id value of the peer table entry to which this call was made. If a peer table entry for this call does not exist, the value of this object will be zero.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.2.1.10.21.1.4.3.1.3
callHistoryPeerIfIndex This is the ifIndex value of the peer table entry to which this call was made. If a peer table entry for this call does not exist, the value of this object will be zero.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.2.1.10.21.1.4.3.1.4
callHistoryLogicalIfIndex This is the ifIndex value of the logical interface through which this call was made. For ISDN media, this would be the ifIndex of the B channel which was used for this call.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.21.1.4.3.1.5
callHistoryDisconnectCause The encoded network cause value associated with this call. The value of this object will depend on the interface type as well as on the protocol and protocol version being used on this interface. Some ref…	OctetString Constraints: range: 0-4	.1.3.6.1.2.1.10.21.1.4.3.1.6
callHistoryDisconnectText ASCII text describing the reason for call termination. This object exists because it would be impossible for a management station to store all possible cause values for all types of interfaces. It should …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.2.1.10.21.1.4.3.1.7
callHistoryConnectTime The value of sysUpTime when the call was connected.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.21.1.4.3.1.8
callHistoryDisconnectTime The value of sysUpTime when the call was disconnected.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.21.1.4.3.1.9
callHistoryCallOrigin The call origin.	Enumeration Enumerated Values: 1 originate 2 answer 3 callback	.1.3.6.1.2.1.10.21.1.4.3.1.10
callHistoryChargedUnits The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the value of this object will be zero.	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.4.3.1.11
callHistoryInfoType The information type for this call.	Enumeration Enumerated Values: 1 other 2 speech 3 unrestrictedDigital 4 unrestrictedDigital56 5 restrictedDigital 6 audio31 7 audio7 8 video 9 packetSwitched 10 fax	.1.3.6.1.2.1.10.21.1.4.3.1.12
callHistoryTransmitPackets The number of packets which were transmitted while this call was active.	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.4.3.1.13
callHistoryTransmitBytes The number of bytes which were transmitted while this call was active.	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.4.3.1.14
callHistoryReceivePackets The number of packets which were received while this call was active.	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.4.3.1.15
callHistoryReceiveBytes The number of bytes which were received while this call was active.	AbsoluteCounter32	.1.3.6.1.2.1.10.21.1.4.3.1.16