dialCtlPeerCfgOriginateAddress
DIAL-CONTROL-MIB ·
.1.3.6.1.2.1.10.21.1.2.1.1.4
Object
Call Address at which the peer will be called.
Think of this as the set of characters following 'ATDT '
or the 'phone number' included in a D channel call request.
The structure of this information will be switch type
specific. If there is no address information required
for reaching the peer, i.e., for leased lines,
this object will be a zero length string.
Context
- MIB
- DIAL-CONTROL-MIB
- OID
.1.3.6.1.2.1.10.21.1.2.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dialCtlPeerCfgEntry
- Table
- dialCtlPeerCfgTable
- Siblings
- 18
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dialCtlPeerCfgId This object identifies a single peer. There may
be several entries in this table for one peer,
defining different ways of reaching this peer.
Thus, there may be several entries in… | column | Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.1 |
| dialCtlPeerCfgPermission Applicable permissions. callback(4) either rejects the
call and then calls back, or uses the 'Reverse charging'
information element if it is available.
Note that callback(4) is su… | column | Enumeration | .1.3.6.1.2.1.10.21.1.2.1.1.10 |
| dialCtlPeerCfgInactivityTimer The connection will be automatically disconnected
if no longer carrying useful data for a time
period, in seconds, specified in this object.
Useful data in this context refers to … | column | seconds Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.11 |
| dialCtlPeerCfgMinDuration Minimum duration of a call in seconds, starting from the
time the call is connected until the call is disconnected.
This is to accomplish the fact that in most countries
charging … | column | Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.12 |
| dialCtlPeerCfgMaxDuration Maximum call duration in seconds. Zero means 'unlimited'. | column | Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.13 |
| dialCtlPeerCfgCarrierDelay The call timeout time in seconds. The default value
of zero means that the call timeout as specified for
the media in question will apply. | column | seconds Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.14 |
| dialCtlPeerCfgCallRetries The number of calls to a non-responding address
that may be made. A retry count of zero means
there is no bound. The intent is to bound
the number of successive calls to an addres… | column | Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.15 |
| dialCtlPeerCfgRetryDelay The time in seconds between call retries if a peer
cannot be reached.
A value of zero means that call retries may be done
without any delay. | column | seconds Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.16 |
| dialCtlPeerCfgFailureDelay The time in seconds after which call attempts are
to be placed again after a peer has been noticed
to be unreachable, i.e. after dialCtlPeerCfgCallRetries
unsuccessful call attemp… | column | seconds Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.17 |
| dialCtlPeerCfgTrapEnable This object indicates whether dialCtlPeerCallInformation
and dialCtlPeerCallSetup traps should be generated for
this peer. | column | Enumeration | .1.3.6.1.2.1.10.21.1.2.1.1.18 |
| dialCtlPeerCfgStatus Status of one row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.21.1.2.1.1.19 |
| dialCtlPeerCfgIfType The interface type to be used for calling this peer.
In case of ISDN, the value of isdn(63) is to be used. | column | IANAifType-MIBIANAifType | .1.3.6.1.2.1.10.21.1.2.1.1.2 |
| dialCtlPeerCfgLowerIf ifIndex value of an interface the peer will have to be
called on. For example, on an ISDN interface, this can be
the ifIndex value of a D channel or the ifIndex value of a
B chann… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.10.21.1.2.1.1.3 |
| dialCtlPeerCfgAnswerAddress Calling Party Number information element, as for example
passed in an ISDN SETUP message by a PBX or switch,
for incoming calls.
This address can be used to identify the peer.
If … | column | SNMPv2-TCDisplayString | .1.3.6.1.2.1.10.21.1.2.1.1.5 |
| dialCtlPeerCfgSubAddress Subaddress at which the peer will be called.
If the subaddress is undefined for the given media or
unused, this is a zero length string. | column | SNMPv2-TCDisplayString | .1.3.6.1.2.1.10.21.1.2.1.1.6 |
| dialCtlPeerCfgClosedUserGroup Closed User Group at which the peer will be called.
If the Closed User Group is undefined for the given media
or unused, this is a zero length string. | column | SNMPv2-TCDisplayString | .1.3.6.1.2.1.10.21.1.2.1.1.7 |
| dialCtlPeerCfgSpeed The desired information transfer speed in bits/second
when calling this peer.
The detailed media specific information, e.g. information
type and information transfer rate for ISDN… | column | Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.8 |
| dialCtlPeerCfgInfoType The Information Transfer Capability to be used when
calling this peer.
speech(2) refers to a non-data connection, whereas
audio31(6) and audio7(7) refer to data mod… | column | Enumeration | .1.3.6.1.2.1.10.21.1.2.1.1.9 |