dialCtlPeerCfgMaxDuration
DIAL-CONTROL-MIB ·
.1.3.6.1.2.1.10.21.1.2.1.1.13
Object
column
r/w
Integer32
Maximum call duration in seconds. Zero means 'unlimited'.
Context
- MIB
- DIAL-CONTROL-MIB
- OID
.1.3.6.1.2.1.10.21.1.2.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dialCtlPeerCfgEntry
- Table
- dialCtlPeerCfgTable
- Siblings
- 18
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dialCtlPeerCfgId This object identifies a single peer. There may
be several entries in this table for one peer,
defining different ways of reaching this peer.
Thus, there may be several entries in… | column | Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.1 |
| dialCtlPeerCfgPermission Applicable permissions. callback(4) either rejects the
call and then calls back, or uses the 'Reverse charging'
information element if it is available.
Note that callback(4) is su… | column | Enumeration | .1.3.6.1.2.1.10.21.1.2.1.1.10 |
| dialCtlPeerCfgInactivityTimer The connection will be automatically disconnected
if no longer carrying useful data for a time
period, in seconds, specified in this object.
Useful data in this context refers to … | column | seconds Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.11 |
| dialCtlPeerCfgMinDuration Minimum duration of a call in seconds, starting from the
time the call is connected until the call is disconnected.
This is to accomplish the fact that in most countries
charging … | column | Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.12 |
| dialCtlPeerCfgCarrierDelay The call timeout time in seconds. The default value
of zero means that the call timeout as specified for
the media in question will apply. | column | seconds Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.14 |
| dialCtlPeerCfgCallRetries The number of calls to a non-responding address
that may be made. A retry count of zero means
there is no bound. The intent is to bound
the number of successive calls to an addres… | column | Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.15 |
| dialCtlPeerCfgRetryDelay The time in seconds between call retries if a peer
cannot be reached.
A value of zero means that call retries may be done
without any delay. | column | seconds Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.16 |
| dialCtlPeerCfgFailureDelay The time in seconds after which call attempts are
to be placed again after a peer has been noticed
to be unreachable, i.e. after dialCtlPeerCfgCallRetries
unsuccessful call attemp… | column | seconds Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.17 |
| dialCtlPeerCfgTrapEnable This object indicates whether dialCtlPeerCallInformation
and dialCtlPeerCallSetup traps should be generated for
this peer. | column | Enumeration | .1.3.6.1.2.1.10.21.1.2.1.1.18 |
| dialCtlPeerCfgStatus Status of one row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.21.1.2.1.1.19 |
| dialCtlPeerCfgIfType The interface type to be used for calling this peer.
In case of ISDN, the value of isdn(63) is to be used. | column | IANAifType-MIBIANAifType | .1.3.6.1.2.1.10.21.1.2.1.1.2 |
| dialCtlPeerCfgLowerIf ifIndex value of an interface the peer will have to be
called on. For example, on an ISDN interface, this can be
the ifIndex value of a D channel or the ifIndex value of a
B chann… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.10.21.1.2.1.1.3 |
| dialCtlPeerCfgOriginateAddress Call Address at which the peer will be called.
Think of this as the set of characters following 'ATDT '
or the 'phone number' included in a D channel call request.
… | column | SNMPv2-TCDisplayString | .1.3.6.1.2.1.10.21.1.2.1.1.4 |
| dialCtlPeerCfgAnswerAddress Calling Party Number information element, as for example
passed in an ISDN SETUP message by a PBX or switch,
for incoming calls.
This address can be used to identify the peer.
If … | column | SNMPv2-TCDisplayString | .1.3.6.1.2.1.10.21.1.2.1.1.5 |
| dialCtlPeerCfgSubAddress Subaddress at which the peer will be called.
If the subaddress is undefined for the given media or
unused, this is a zero length string. | column | SNMPv2-TCDisplayString | .1.3.6.1.2.1.10.21.1.2.1.1.6 |
| dialCtlPeerCfgClosedUserGroup Closed User Group at which the peer will be called.
If the Closed User Group is undefined for the given media
or unused, this is a zero length string. | column | SNMPv2-TCDisplayString | .1.3.6.1.2.1.10.21.1.2.1.1.7 |
| dialCtlPeerCfgSpeed The desired information transfer speed in bits/second
when calling this peer.
The detailed media specific information, e.g. information
type and information transfer rate for ISDN… | column | Integer32 | .1.3.6.1.2.1.10.21.1.2.1.1.8 |
| dialCtlPeerCfgInfoType The Information Transfer Capability to be used when
calling this peer.
speech(2) refers to a non-data connection, whereas
audio31(6) and audio7(7) refer to data mod… | column | Enumeration | .1.3.6.1.2.1.10.21.1.2.1.1.9 |