CTRON-SFCS-MIB Table View

This table contains the configuration and administrative
information for each SFCS module.  Essentially, a
separate SFCS instance exists for each switch module.
If SFCS is not configured on a module, than an entry
will not exist.

sfcsConfigEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1

Each entry specifies the SFCS configuration for the
SFCS module.

Indexes

sfcsConfigSlotIndex

Column	Syntax	OID
sfcsConfigSlotIndexmandatory The primary index to the SFCS switch table. This identifies the chassis slot number for this switch module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.1
sfcsConfigAdminStatusmandatory Sets the administrative state of the SFCS switching services for this SFCS module. This controls the SFCS state at a module level. Regardless of the per-interface state of each SFCS switching interface and the state o…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 other	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.2
sfcsConfigAdminResetmandatory Resets this SFCS module. Writing a value of reset(2) will force a soft restart of the SFCS without any graceful shutdown. Any active connections or services will be interrupted. other(1) -- none of the fo…	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.3
sfcsConfigOperStatusmandatory Indicates the current operating condition of the SFCS module. enabled(1) -- running disabled(2) -- not running other(3) -- none of the following pending-disa…	Enumeration Enumerated Values: 1 enabled 2 disabled 3 other 4 pending-disable 5 pending-enable 6 invalid-config	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.4
sfcsConfigOperTimemandatory Indicates the amount of time (# of time ticks) that this SFCS module has been in its current operational state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.5
sfcsConfigLastChangemandatory Indicates the last time a change was made to the configuration entry for this SFCS switch module.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.6
sfcsConfigVersionmandatory Indicates the current revision level of the SFCS MIB for this switch module expressed as an integer.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.7
sfcsConfigMibRevmandatory Indicates in textual format the current revision level of the Cabletron SFCS MIB for this switch module.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.8
sfcsConfigSwitchHostPortmandatory Indicates the switch port that is attached to the host.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.9
sfcsConfigHostCtrlATMAddrmandatory Indicates the ATM address of the host. (SAR)	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.10
sfcsConfigSwitchCapacitymandatory Indicates the front panel bandwidth based on the hardware that is currently installed, in Mbps. (number of ports and the port type)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.11
sfcsConfigMaxCnxEntriesmandatory Indicates the maximum number of connections which can be established on this switch module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.12
sfcsConfigMaxStatEntriesmandatory Indicates the maximum number of stats enabled VCs for this switch module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.13
sfcsConfigMaxUpcEntriesmandatory Indicates the maximum number of UPC enabled VCs for this switch module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.14
sfcsConfigNumberANIMSmandatory Indicates the number of ATM Network Inteface Modules currently configured on this switch module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.15
sfcsConfigBwCapabilitymandatory Indicates the total bandwidth capability for this switch engine expressed in Mbps.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.16
sfcsConfigMasterClock1Sourcemandatory Indicates the clocking source for MasterClock1 on each board. The write will fail if it is also currently the source of the backplane. The write will also fail if the board does not support backplane clocking.	Enumerationr/w Enumerated Values: 1 anim-one-clk 2 anim-two-clk 3 anim-three-clk 4 anim-four-clk 5 backplane-one 6 backplane-two	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.17
sfcsConfigMasterClock2Sourcemandatory Indicates the clocking source for MasterClock2 on each board. The write will fail if it is also currently the source of the backplane. The write will also fail if the board does not support backplane clocking.	Enumerationr/w Enumerated Values: 1 anim-one-clk 2 anim-two-clk 3 anim-three-clk 4 anim-four-clk 5 backplane-one 6 backplane-two	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.18
sfcsConfigMasterClock1Standbymandatory Indicates the clocking stand-by for MasterClock1 on each board. The write will fail if it is also currently the source of the backplane. The write will also fail if the board does not support backplane clocking. If this…	Enumerationr/w Enumerated Values: 1 anim-one-clk 2 anim-two-clk 3 anim-three-clk 4 anim-four-clk 5 backplane-one 6 backplane-two 7 none	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.19
sfcsConfigMasterClock2Standbymandatory Indicates the clocking stand-by for MasterClock2 on each board. The write will fail if it is also currently the source of the backplane. The write will also fail if the board does not support backplane clocking. If this…	Enumerationr/w Enumerated Values: 1 anim-one-clk 2 anim-two-clk 3 anim-three-clk 4 anim-four-clk 5 backplane-one 6 backplane-two 7 none	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.20

This table contains the status information for each SFCS
switch module.

sfcsStatusEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1

Each entry contains the SFCS statistics for the SFCS
instance.

Indexes

sfcsStatusSlotIndex

Column	Syntax	OID
sfcsStatusSlotIndexmandatory The primary index to the SFCS switch table. This identifies the chassis slot number for this SFCS module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.1
sfcsStatusTdmCellCountmandatory Indicates the total number of cells being transfered across the TDM for this switch module.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.2
sfcsStatusTdmUtilizationmandatory Indicates the percentage TDM utilization for this switch module.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.3
sfcsStatusCurrCnxEntriesmandatory Indicates the current number of connection entries for this switch module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.4
sfcsStatusCurrUPCEntriesmandatory Indicates the current number of UPC entries for this switch module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.5
sfcsStatusCurrStatsEntriesmandatory Indicates the current number of statistics entries for this switch module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.6
sfcsStatusCurrCtmAgentmandatory Indicates the current board number of the ctm agent for this switch module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.7

This table contains the Usage Parameter Control info
for this SFCS module.

sfcsUPCEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1

Each entry contains the UPC data for the SFCS instance.

Indexes

sfcsUPCSlotIndex

Column	Syntax	OID
sfcsUPCSlotIndexmandatory The primary index to the SFCS switch table. This identifies the slot number for this SFCS module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.1
sfcsUPCAdminStatusmandatory Sets the administrative state of the SFCS module's UPC engine. enabled(1) disabled(2) other(3)	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 other	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.2
sfcsUPCOperStatusmandatory Indicates the operational state of the SFCS module's UPC engine.	Enumeration Enumerated Values: 1 enabled 2 disabled 3 other	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.3
sfcsUPCResetmandatory Resets the UPC engine for this SFCS module. other(1) reset(2)	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.4
sfcsUPCOperTimemandatory Indicates the amount of time (# of time ticks) that the UPC engine has been active for this switch module.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.5

This table contains information for the Statistics engine
for a particular switch module.

sfcsStatsEngineEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1

Each entry contains the statistics engine data for the
SFCS module.

Indexes

sfcsStatsEngineSlotIndex

Column	Syntax	OID
sfcsStatsEngineSlotIndexmandatory The primary index to the SFCS stats engine table. This identifies the chassis slot number for this SFCS module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.1
sfcsStatsEngineAdminStatusmandatory Sets the administrative state of the SFCS switch statistics engine. Writing a value of enabled(1) causes these counters to become active for this SFCS switch instance. Writing a value of disabled(2) causes these count…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 other	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.2
sfcsStatsEngineOperStatusmandatory Indicates the operational state of the SFCS switch statistics engine for this switch module. enabled(1) disabled(2) other(3)	Enumeration Enumerated Values: 1 enabled 2 disabled 3 other	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.3
sfcsStatsEngineResetmandatory Resets the SFCS switch counters for this SFCS module. Writing a value of reset(2) resets the SFCS switch counters to 0 and causes sfcsStatsEngineOperTime to also be reset to 0. other(1) reset(2)	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.4
sfcsStatsEngineOperTimemandatory Indicates the amount of time (# of time ticks) that the SFCS switch statistics have been active for this switch module.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.5

This table contains information for the Packet Discard engine
for a particular switch module.

sfcsPacketDiscardEngineEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1

Each entry contains the packet discard engine data for the
SFCS module.

Indexes

sfcsPacketDiscardEngineSlotIndex

Column	Syntax	OID
sfcsPacketDiscardEngineSlotIndexmandatory The primary index to the SFCS packet discard engine table. This identifies the chassis slot number for this SFCS module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.1
sfcsPacketDiscardEngineAdminStatusmandatory Sets the administrative state of the SFCS switch packet discard engine. Writing a value of enabled(1) causes these packet discard registers to become active for this SFCS switch instance. Writing a value of disabled(2…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 other	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.2
sfcsPacketDiscardEngineOperStatusmandatory Indicates the operational state of the SFCS switch packet discard engine for this switch module. enabled(1) disabled(2) other(3)	Enumeration Enumerated Values: 1 enabled 2 disabled 3 other	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.3
sfcsPacketDiscardEngineResetmandatory Resets the SFCS switch registers for this SFCS module. Writing a value of reset(2) resets the SFCS switch packet discard registers to 0 and causes sfcsPacketDiscardEngineOperTime to also be reset to 0. other(…	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.4
sfcsPacketDiscardEngineEPDPercentagemandatory Sets the Early Packet Discard threshold percentage for every port, and every priority on a single blade.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.5
sfcsPacketDiscardEngineOperTimemandatory Indicates the amount of time (# of time ticks) that the SFCS switch packet discard engine has been active for this switch module.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.6

This table contains the configuration information for
each SFCS ANIM instance.

sfcsANIMConfigEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1

Each entry contains the SFCS config info for the SFCS
instance.

Indexes

sfcsANIMConfigANIMIndex

Column	Syntax	OID
sfcsANIMConfigANIMIndexmandatory This index specifies which ANIM we are dealing with. This reference is in the same format as MIB II's InterfaceIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.1
sfcsANIMConfigAdminStatusmandatory Sets the administrative state of the SFCS switch ANIM. enabled(1) disabled(2) other(3)	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 other	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.2
sfcsANIMConfigOperStatusmandatory Indicates the operational state of the SFCS switch ANIM for this SFCS ANIM instance. enabled(1) disabled(2) other(3)	Enumeration Enumerated Values: 1 enabled 2 disabled 3 other	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.3
sfcsANIMConfigANIMTypemandatory Indicates the type of physical interface for this ANIM. The types are described in ctron.oids	ObjectIdentifier	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.4
sfcsANIMConfigNumInterfacesmandatory Indicates the number of operational interfaces for this ANIM.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.5
sfcsANIMConfigLineRatemandatory Indicates the line rate per port for this ANIM in Mbps.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.6
sfcsANIMConfigToMBmandatory This is the ANIM clock source to board.	Enumerationr/w Enumerated Values: 1 local-anim-clock 2 port-one-clock 3 port-two-clock 4 port-three-clock 5 port-four-clock	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.7
sfcsANIMConfigMBClockSelectmandatory This indicates the ANIM clock source.	Enumerationr/w Enumerated Values: 1 master-clk-one 2 master-clk-two	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.8

This table contains the statistics information for
each SFCS ANIM instance.

sfcsANIMStatsEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1

Each entry contains the SFCS statistics for the SFCS
instance.

Indexes

sfcsANIMStatsANIMIndex

Column	Syntax	OID
sfcsANIMStatsANIMIndexmandatory The primary index which specifies which ANIM instance we are dealing with. This index is formatted like MIB II's Interface Index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.1
sfcsANIMStatsRxCellsmandatory Indicates the number of cells received from this ANIM's interfaces.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.2
sfcsANIMStatsTxCellsmandatory Indicates the number of cells transmitted from this ANIM's interfaces.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.3

This table contains the PIC information for
each SFCS ANIM instance.

sfcsANIMPicEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1

Each entry contains the SFCS PIC info for the SFCS
instance.

Indexes

sfcsANIMPicIndex

Column	Syntax	OID
sfcsANIMPicSlotmandatory Specific slot which the module that realizes this PIC resides. If the PIC is associated with the chassis and not a specific module then this value will be 0.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.1
sfcsANIMPicIndexmandatory Uniquely identifies the instance of a PIC in a particular slot.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.2
sfcsANIMPicLocationmandatory Defines location of the PIC chip. This takes on any of the encoding values defined below for backplane, module, daughter board, brim.	ObjectIdentifier	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.3
sfcsANIMPicStatusmandatory Provides the status of the specific PIC chip. the values are defined as follows: other(1) - firmware can not determine status present(2) - PIC seems to be functional notPresent(3) - PIC not foun…	Enumeration Enumerated Values: 1 other 2 present 3 notPresent 4 checkSum 5 error 6 limited	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.4
sfcsANIMPicVersionmandatory Reflects the version of the PIC implementation that this PIC conforms to. This has the format x.yy . If non-existent, this object will be set to all blanks(ascii 32).	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.5
sfcsANIMPicModuleTypemandatory Defines the standard module type value as defined in ctron-oids.	ObjectIdentifier	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.6
sfcsANIMPicMfgPNmandatory Describes the manufacturing level part number of the module associated with this PIC. This information is encoded as follows: 7 Characters Part Number 2 Characters Rework Location. If any field of…	OctetString Constraints: range: 9-9	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.7
sfcsANIMPicMfgSNmandatory Describes the manufacturing level serial number of the module associated with this PIC. This information is encoded as follows: 3 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - …	OctetString Constraints: range: 12-12	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.8
sfcsANIMPicMfgPartNumbmandatory This object presents the part number portion of the ctPicMfgPN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32…	OctetString Constraints: range: 7-7	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.9
sfcsANIMPicMfgSerialNumbmandatory This object presents the serial number portion of the ctPicMfgSN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii …	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.10
sfcsANIMPicMfgReworkLocationmandatory The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicMfgPN object however in a more human readable format. If non-existent, this o…	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.11
sfcsANIMPicMfgMfgLocationmandatory The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, th…	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.12
sfcsANIMPicMfgDateCodemandatory The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-e…	OctetString Constraints: range: 3-3	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.13
sfcsANIMPicMfgRevisionCodemandatory The 3 character board level revision code field of this module. This object contains the same information as presented in ctPicMfgSN object however in a more human readable format. If non-existent, this object will be…	OctetString Constraints: range: 3-3	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.14
sfcsANIMPicTLPNmandatory Describes the top level part number of the module associated with this PIC. This information is encoded as follows: 7 Characters Part Number 2 Characters Rework Location. If any field of this obje…	OctetString Constraints: range: 9-9	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.15
sfcsANIMPicTLSNmandatory Describes the top level serial number of the module associated with this PIC. This information is encoded as follows: 3 bytes - Date code (year/week) 4 bytes - Serial number 2 bytes - Manufactur…	OctetString Constraints: range: 12-12	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.16
sfcsANIMPicTLPartNumbmandatory This object presents the part number portion of the ctPicTLPN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 32).	OctetString Constraints: range: 7-7	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.17
sfcsANIMPicTLSerialNumbmandatory This object presents the serial number portion of the ctPicTLSN object. This object contains the same information however in a more human readable format. If non-existent, this object will be set to all blanks(ascii 3…	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.18
sfcsANIMPicTLReworkLocationmandatory The 2 character code that defines the location this module was last reworked. This object contains the same information as presented in ctPicTLPN object however in a more human readable format. If non-existent, this ob…	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.19
sfcsANIMPicTLMfgLocationmandatory The two character code that defines the location this module was manufactured at. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, thi…	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.20
sfcsANIMPicTLDateCodemandatory The 3 byte date code field when this module was last reworked. This is in year/week format. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-ex…	OctetString Constraints: range: 3-3	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.21
sfcsANIMPicTLRevisionCodemandatory The 3 character top level revision code field of this module. This object contains the same information as presented in ctPicTLSN object however in a more human readable format. If non-existent, this object will be set …	OctetString Constraints: range: 3-3	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.22
sfcsANIMPicTLPcbRevisionmandatory Defines the Cabletron revision of the art work for this module. If non-existent, this object will be set to all blanks(ascii 32).	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.23
sfcsANIMPicMacAddrmandatory The base MAC address(ethernet format)assigned to the module. If this field is not used then it should have a value of a zero length string. If non-existent, this object will be set to all blanks(ascii 32).	OctetString Constraints: range: 0-6	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.24
sfcsANIMPicNumbRsvdAddrsmandatory The number of reserved MAC addresses starting at the address as defined in ctPicMacAddr. If no MAC addresses are reserved this object should have a value of 0.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.25
sfcsANIMPicBoardLevelRevisionmandatory Defines the Cabletron board level revision level code for this module. If non-existent, this object will be set to blanks (ascii 32).	OctetString Constraints: range: 3-3	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.26
sfcsANIMPicModuleTypeStringmandatory Describes the module associated with this PIC in a human readable format. If non-existent, this object will be set to blanks (ascii 32).	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.27
sfcsANIMPicDcDcConverterTypemandatory Describes the voltage of the installed DCDC Converter input and output lines. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32).	OctetString Constraints: range: 12-12	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.28
sfcsANIMPicDcDcConverterInputPowermandatory Describes the maximum allowed input power for the DCDC input line. If the Module does not contain a DCDC Converter this object will be set to blanks (ascii 32).	OctetString Constraints: range: 3-3	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.29
sfcsANIMPicSmb1PromVersionmandatory Describes the current version of the SMB1 prom. If the Module does not contain an SMB1 prom this object will be set to blanks (ascii 32).	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.30

This table contains the configuration information of each
configured SFCS switch interface.  If SFCS is not configured
on a port, than an entry will not exist.

sfcsInterfaceConfigEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1

Each entry specifies the SFCS configuration for the SFCS
switch interface for which the entry exists.

Indexes

sfcsInterfaceConfigInterfaceIndex

Column	Syntax	OID
sfcsInterfaceConfigInterfaceIndexmandatory The index which specifies which interface we are dealing with.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.1
sfcsInterfaceConfigTypeobsolete Sets the type of interface access attribute for the SFCS interfaces. Access ports allow single user or shared access and perform statisics and control; network ports are equivalent to trunk ports with no access control…	Enumeration Enumerated Values: 1 other 2 access-port 3 network-port 4 host-mgmt-port 5 host-ctl-port	.1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.2
sfcsInterfacePeakBufferUseagemandatory An accumulated snap shot of the current peak queue depth for the configured buffer queues. This information is obtained from a read/reset register.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.3
sfcsInterfaceConfigNumberOfQueuesmandatory Indicates the number of priority queues configured on this interface.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.4
sfcsInterfaceConfigSigStackIDmandatory Indicates the user signalling stack ID for this interface.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.5
sfcsInterfaceConfigClockingSourcemandatory The interface clocking source.	Enumerationr/w Enumerated Values: 1 local-anim-clock 2 mother-board-master-clock	.1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.6

This table contains the cell counts for each
SFCS switch interface.

sfcsInterfaceStatsEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1

Specifies the SFCS cell counts for the SFCS
interface for which this entry exists.

Indexes

sfcsInterfaceStatsInterfaceIndex

Column	Syntax	OID
sfcsInterfaceStatsInterfaceIndexmandatory The index which specifies which interface we are dealing with.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.1
sfcsInterfaceStatsRxErrorsmandatory Indicates the number of receive path lookup invalid and out of range errors.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.2
sfcsInterfaceStatsVPILookupInvalidErrorsmandatory Indicates the number of VPI lookup invalid and out of range errors.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.3
sfcsInterfaceStatsRxCnxLookupInvalidErrorsmandatory Indicates the number of receive connection lookup invalid errors.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.4
sfcsInterfaceStatsRxCellCntmandatory Indicates the number of receive cells on this interface.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.5
sfcsInterfaceStatsTxCellCntmandatory Indicates the number of transmit cells on this interface.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.6
sfcsInterfaceStatsOverflowDropCellCntmandatory Indicates the number of cells that were dropped due to queue overflows.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.7

This table contains the configuration information for
all queues on the SFCS.

sfcsQueueConfigEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1

Each entry specifies the queue information for the
SFCS switch for which the entry exists.

Indexes

sfcsQueueConfigInterfaceIndex sfcsQueueConfigQueueIndex

Column	Syntax	OID
sfcsQueueConfigInterfaceIndexmandatory The index which specifies which interface we are dealing with.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.1
sfcsQueueConfigQueueIndexmandatory The index which specifies which transmit queue we are dealing with.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.2
sfcsQueueConfigQueueSizemandatory Indicates the size of the transmit queue for this queue instance.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.3
sfcsQueueConfigQueueBandwidthmandatory Indicates the percentage of this interface's bandwidth utilized by this particular queue.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.4
sfcsQueueConfigClpDropThresholdmandatory Indicates the queue level to start dropping CLP=1 cells for this queue. This level is expressed as the percentage of this queue's size.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.5
sfcsQueueConfigCongestionThresholdmandatory Indicates the level to consider this queue congested. This level is expressed as the percentage of this queue's size.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.6
sfcsQueueConfigEFCILowThresholdmandatory Indicates the lower threshold used for EFCI for this queue instance. This level is expressed as the percentage of this queue's size.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.7
sfcsQueueConfigRMThresholdmandatory Indicates the remote management queue threshold expressed as a percentage of the queue's size. When this level is hit, a management message is sent to the sender notifying it to slow down.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.8
sfcsQueueConfigEPDThresholdmandatory Indicates the Early Packet Discard threshold expressed as a percentage of the queue's size. When this level is exceeded the Transmit ASIC starts to drop all cells entering this queue.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.9

This table contains the statistics information for all
queues on the SFCS.

sfcsQueueStatsEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1

Each entry specifies the queue information for the
SFCS switch for which the entry exists.

Indexes

sfcsQueueStatsInterfaceIndex sfcsQueueStatsQueue

Column	Syntax	OID
sfcsQueueStatsInterfaceIndexmandatory The index which specifies which interface we are dealing with.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.1
sfcsQueueStatsQueuemandatory The index which specifies which queue we are dealing with.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.2
sfcsQueueStatsTxClpCellsDiscardedmandatory Indicates the number of cells with CLP=1 that were discarded for this queue instance.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.3
sfcsQueueStatsTxCellsDroppedmandatory Indicates the number of cells that overflowed the buffer for this queue instance.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.4
sfcsQueueStatsQueuePeakLevelmandatory Indicates the peak level since last read for this queue instance.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.5
sfcsQueueStatsTxCellCntmandatory Indicates the transmit cell count on a per queue basis. A value of zero indicates not available	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.6

This table contains the connection configuration
information.

sfcsCnxCfgEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1

Each entry specifies the connection configuration
information for the SFCS switch connection instance.

Indexes

sfcsCnxCfgCrossConnectIndex sfcsCnxCfgCrossConnectLowIfIndex sfcsCnxCfgCrossConnectLowVpi sfcsCnxCfgCrossConnectLowVci sfcsCnxCfgCrossConnectHighIfIndex sfcsCnxCfgCrossConnectHighVpi sfcsCnxCfgCrossConnectHighVci

Column	Syntax	OID
sfcsCnxCfgCrossConnectIndexmandatory A unique value to identify this cross-connect.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.1
sfcsCnxCfgCrossConnectLowIfIndexmandatory The value of this object is equal to the low MIB II IfIndex value of the ATM interface port for this cross-connect.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.2
sfcsCnxCfgCrossConnectLowVpimandatory The value of this object is equal to the low VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxCfgCrossConnectIndex.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.3
sfcsCnxCfgCrossConnectLowVcimandatory The value of this object is equal to the low VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxCfgCrossConnectIndex.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.4
sfcsCnxCfgCrossConnectHighIfIndexmandatory The value of this object is equal to the high MIB II IfIndex value of the ATM interface port for this cross-connect.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.5
sfcsCnxCfgCrossConnectHighVpimandatory The value of this object is equal to the high VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxCfgCrossConnectIndex.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.6
sfcsCnxCfgCrossConnectHighVcimandatory The value of this object is equal to the high VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxCfgCrossConnectIndex.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.7
sfcsCnxCfgTypemandatory Indicates the connection type for this VC. point-to-point-vpl(1) point-to-mpoint-vpl(2) mpoint-to-mpoint-vpl(3) point-to-point-vcl(4) point-to-mpoint-vcl(5) mpoint-to-mpoint-vcl(6)	Enumeration Enumerated Values: 1 point-to-point-vpl 2 point-to-mpoint-vpl 3 mpoint-to-mpoint-vpl 4 point-to-point-vcl 5 point-to-mpoint-vcl 6 mpoint-to-mpoint-vcl	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.8
sfcsCnxCfgTmTypemandatory Indicates the type of traffic management used on this VC. other (1) efci (2) er (3)	Enumeration Enumerated Values: 1 other 2 efci 3 er	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.9
sfcsCnxCfgUPCEnablemandatory Indicates whether or not UPC policing is enabled on this VC. A VC can be bi-directional or uni-directional. Due to this, the UPC bit is a masking based on directionality. Where direction is in terms of high interface (H…	Enumeration Enumerated Values: 1 l-h-upc-enabled 2 l-h-tag-enabled 3 l-h-upc-tag-enabled 4 h-l-upc-enabled 5 l-h-upc-and-h-l-upc-enabled 6 l-h-Tag-and-h-l-upc-enabled 7 l-h-upc-tag-and-h-l-upc-enabled 8 h-l-tag-enabled 9 l-h-upc-and-h-l-tag-enabled 10 l-h-tag-and-h-l-tag-enabled 11 l-h-upc-tag-and-h-l-tag-enabled 12 h-l-upc-tag-enabled 13 l-h-upc-and-h-l-upc-tag-enabled 14 l-h-tag-and-h-l-upc-tag-enabled 15 l-h-upc-tag-and-h-l-upc-tag-enabled	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.10
sfcsCnxCfgStatsEnablemandatory Indicates whether statistics will be kept on this VC. enabled(1) disabled(2) other(3)	Enumeration Enumerated Values: 1 enabled 2 disabled 3 other	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.11
sfcsCnxCfgStatsTableCounterSizesmandatory Indicates the size of the drop counter for this VC. thirtytwobittagcounter (1) thirtytwobitdropcounter (2) sixteenbiteachcounter (3)	Enumeration Enumerated Values: 1 thirtytwobittagcounter 2 thirtytwobitdropcounter 3 sixteenbiteachcounter	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.12
sfcsCnxCfgOwnermandatory Indicates the owner of this cross connect. other(1) own(2) dontown(3)	Enumeration Enumerated Values: 1 other 2 own 3 dontown	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.13

This table contains the connection configuration
information.

sfcsCnxStatsEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1

Each entry specifies the connection statistics
information for the SFCS switch connection instance.

Indexes

sfcsCnxStatsCrossConnectIndex sfcsCnxStatsCrossConnectLowIfIndex sfcsCnxStatsCrossConnectLowVpi sfcsCnxStatsCrossConnectLowVci sfcsCnxStatsCrossConnectHighIfIndex sfcsCnxStatsCrossConnectHighVpi sfcsCnxStatsCrossConnectHighVci

Column	Syntax	OID
sfcsCnxStatsCrossConnectIndexmandatory A unique value to identify this cross-connect.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.1
sfcsCnxStatsCrossConnectLowIfIndexmandatory The value of this object is equal to the low MIB II IfIndex value of the ATM interface port for this cross-connect.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.2
sfcsCnxStatsCrossConnectLowVpimandatory The value of this object is equal to the low VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxStatsCrossConnectIndex.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.3
sfcsCnxStatsCrossConnectLowVcimandatory The value of this object is equal to the low VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxStatsCrossConnectIndex.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.4
sfcsCnxStatsCrossConnectHighIfIndexmandatory The value of this object is equal to the high MIB II IfIndex value of the ATM interface port for this cross-connect.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.5
sfcsCnxStatsCrossConnectHighVpimandatory The value of this object is equal to the high VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxStatsCrossConnectIndex.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.6
sfcsCnxStatsCrossConnectHighVcimandatory The value of this object is equal to the high VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxStatsCrossConnectIndex.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.7
sfcsCnxStatsLoToHiHTxCellsmandatory Indicates the transmitted cell count for this connection. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.8
sfcsCnxStatsLoToHiDroppedCellsmandatory Indicates the dropped cell count for this connection instance. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.9
sfcsCnxStatsLoToHiTaggedCellsmandatory Indicates the tagged cell count for this connection instance. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.10
sfcsCnxStatsHiToLoHTxCellsmandatory Indicates the transmitted cell count for this connection. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.11
sfcsCnxStatsHiToLoDroppedCellsmandatory Indicates the dropped cell count for this connection instance. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.12
sfcsCnxStatsHiToLoTaggedCellsmandatory Indicates the tagged cell count for this connection instance. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.13

This table contains the connection error information
supplied by the atmAPI mib.

sfcsCnxErrorEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1

A list of VCC connection request failures. This table
is indexed the same way as the atmVcCrossConnectTable
in the AToM mib.

Indexes

ATM-MIBatmVcCrossConnectIndex ATM-MIBatmVcCrossConnectLowIfIndex ATM-MIBatmVcCrossConnectLowVpi ATM-MIBatmVcCrossConnectLowVci ATM-MIBatmVcCrossConnectHighIfIndex ATM-MIBatmVcCrossConnectHighVpi ATM-MIBatmVcCrossConnectHighVci

Column	Syntax	OID
sfcsCnxErrorCodemandatory Specifies the error reason for failure of the connection setup. 01 fatal_error 02 moe_table_out_of_range 03 moe_mem_not_allocated 04 mem_fetch_double_reqst 05 lo_port_invalid 06 lo_port_loc…	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.1
sfcsCnxErrorTimeStampmandatory Indicates the value of the sysUpTime when this connection request failed. We will support this field only if the element management uses this table.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.2
sfcsCnxErrorRowStatusmandatory The administrative control of this entry. The owner could delete this entry after reading it, to prevent this table from growing too big. other (1) inactive (2) active (3) delete (4)	Enumerationr/w Enumerated Values: 1 other 2 inactive 3 active 4 delete	.1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.3

This table contains the configuration information of each
configured SHEMP interface.  If SFCS is not configured
on a port, than an entry will not exist.

sfcsCTMInterfaceConfigEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1

Each entry specifies the SFCS configuration for the SFCS
switch interface for which the entry exists.

Indexes

sfcsCTMInterfaceConfigInterfaceIndex

Column	Syntax	OID
sfcsCTMInterfaceConfigInterfaceIndexmandatory The index which specifies which interface we are dealing with.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.1
sfcsCTMInterfaceConfigTypemandatory Sets the type of interface access attribute for the SFCS interfaces. Access ports allow single user or shared access and perform statisics and control; network ports are equivalent to trunk ports with no access control…	Enumeration Enumerated Values: 1 other 2 access-port 3 network-port 4 host-mgmt-port 5 host-ctl-port	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.2
sfcsCTMInterfacePeakBufferUseagemandatory Indicates the number of cells in transmit buffer memory.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.3
sfcsCTMInterfaceConfigNumberOfQueuesmandatory Indicates the number of priority queues configured on this interface.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.4
sfcsCTMInterfaceConfigSigStackIDmandatory Indicates the user signalling stack ID for this interface.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.5
sfcsCTMInterfaceConfigClockingmandatory The anim clocking source. one - use the generated-transmit-clock two - use the channel-recovered-clock three - use the system-master-clock four - option not supported by this interface	Enumerationr/w Enumerated Values: 1 generated-transmit-clock 2 channel-recovered-clock 3 system-master-clock 4 not-supported	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.6
sfcsCTMInterfaceConfigNextVPImandatory Indicates the next vpi for this interface.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.7
sfcsCTMInterfaceConfigNextVCImandatory Indicates the next vci for this interface.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.8

This table contains the cell counts for each
SFCS switch interface.

sfcsCTMInterfaceStatsEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1

Specifies the SFCS cell counts for the SFCS
interface for which this entry exists.

Indexes

sfcsCTMInterfaceStatsInterfaceIndex

Column	Syntax	OID
sfcsCTMInterfaceStatsInterfaceIndexmandatory The index which specifies which interface we are dealing with.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.1
sfcsCTMInterfaceStatsRxErrorsmandatory Indicates the number of receive path lookup invalid and out of range errors.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.2
sfcsCTMInterfaceStatsVPILookupInvalidErrorsmandatory Indicates the number of VPI lookup invalid and out of range errors.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.3
sfcsCTMInterfaceStatsRxCnxLookupInvalidErrorsmandatory Indicates the number of receive connection lookup invalid errors.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.4
sfcsCTMInterfaceStatsRxCellCntmandatory Indicates the number of receive cells on this interface.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.7
sfcsCTMInterfaceStatsTxCellCntmandatory Indicates the number of transmit cells on this interface.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.8
sfcsCTMInterfaceStatsOverflowDropCellCntmandatory Indicates the number of cells that were dropped due to queue overflows.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.9

This table contains the configuration information for
all queues on the SFCS.

sfcsCTMQueueConfigEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1

Each entry specifies the queue information for the
SFCS switch for which the entry exists.

Indexes

sfcsCTMQueueConfigInterfaceIndex sfcsQueueConfigQueueIndex

Column	Syntax	OID
sfcsCTMQueueConfigInterfaceIndexmandatory The index which specifies which interface we are dealing with.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.1
sfcsCTMQueueConfigQueueIndexmandatory The index which specifies which transmit queue we are dealing with.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.2
sfcsCTMQueueConfigQueueSizemandatory Indicates the size of the transmit queue for this queue instance.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.3
sfcsCTMQueueConfigQueueBandwidthmandatory Indicates the percentage of this interface's bandwidth utilized by this particular queue.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.4
sfcsCTMQueueConfigClpDropThresholdmandatory Indicates the queue level to start dropping CLP=1 cells for this queue. This level is expressed as the percentage of this queue's size.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.5
sfcsCTMQueueConfigCongestionThresholdmandatory Indicates the level to consider this queue congested. This level is expressed as the percentage of this queue's size.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.6
sfcsCTMQueueConfigEFCILowThresholdmandatory Indicates the lower threshold used for EFCI for this queue instance. This level is expressed as the percentage of this queue's size.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.7
sfcsCTMQueueConfigRMThresholdmandatory Indicates the remote management queue threshold expressed as a percentage of the queue's size. When this level is hit, a management message is sent to the sender notifying it to slow down.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.8

This table contains the statistics information for all
queues on the SFCS.

sfcsCTMQueueStatsEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1

Each entry specifies the queue information for the
SFCS switch for which the entry exists.

Indexes

sfcsCTMQueueStatsInterfaceIndex sfcsQueueStatsQueue

Column	Syntax	OID
sfcsCTMQueueStatsInterfaceIndexmandatory The index which specifies which interface we are dealing with.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.1
sfcsCTMQueueStatsQueuemandatory The index which specifies which queue we are dealing with.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.2
sfcsCTMQueueStatsTxClpCellsDiscardedmandatory Indicates the number of cells with CLP=1 that were discarded for this queue instance.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.3
sfcsCTMQueueStatsTxCellsDroppedmandatory Indicates the number of cells that overflowed the buffer for this queue instance.	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.4
sfcsCTMQueueStatsQueuePeakLevelmandatory Indicates the peak level since last read for this queue instance.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.5
sfcsCTMQueueStatsTxCellCntmandatory Indicates the transmit cell count on a per queue basis. A value of zero indicates not available	OctetString	.1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.6

This table contains the Nim Oid and the Nim Administrative Status
reading functions.

sfcsBwNimsEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1

Each entry contains a Nim Oid and the Nim Administrative Status.

Indexes

sfcsBwNimsIndex

Column	Syntax	OID
sfcsBwNimsIndexmandatory This index specifies which NIM we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.1
sfcsBwNimsAdminStatusmandatory Indicates the administrative status of this Nim. 10 - Active 20 - Inactive	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.2
sfcsBWNimsBuffCountmandatory The number of transmit buffers for this NIM	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.3
sfcsBWNimsPortCountmandatory The number of ports for this NIM	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.4
sfcsBWNimsPrioCountmandatory The number of priority queues for this NIM	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.5

This table contains the Port Oid, Port Administrative Status and
the forward/reverse physical bandwidth reading functions.

sfcsBwPortsEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1

Each entry contains the Port Oid, Port Administrative Status and
the forward/reverse physical bandwidth.

Indexes

sfcsBwPortsIndex

Column	Syntax	OID
sfcsBwPortsIndexmandatory This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.1
sfcsBwPortsAdminStatusmandatory Indicates the administrative status of this Port. 10 - Active 20 - Inactive	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.2
sfcsBwPortsPhysBwFwdmandatory This is the forward physical bandwidth of the port in cells/sec.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.3
sfcsBwPortsPhysBwRevmandatory This is the reverse physical bandwidth of the port in cells/sec.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.4
sfcsBwPortsZonemandatory The range of the current bw operational point for this port. If a value has never been set the value will be -1.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.5
sfcsBwPortsMetricmandatory The current bw operational point for this port. If a value has never been set the value will be -1.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.6

This table contains

sfcsBwPortPoolLimitsEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1

Each entry contains

Indexes

sfcsBwPortPoolLimitsIndex sfcsBwPortPoolLimitsPoolIndex

Column	Syntax	OID
sfcsBwPortPoolLimitsIndexmandatory This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.1
sfcsBwPortPoolLimitsPoolIndexmandatory This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.2
sfcsBwPortPoolLimitsMaxAllocBwFwdmandatory Upper Limit for BW to be allocated forward direction. It is defaulted to the physical BW and is set by administrative action. Can't be set to a value greater than physical BW	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.3
sfcsBwPortPoolLimitsMaxAllocBwRevmandatory Upper Limit for BW to be allocated reverse direction. It is defaulted to the physical BW and is set by administrative action. Can't be set to a value greater than physical BW	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.4
sfcsBwPortPoolLimitsBwAllocStratmandatory Determines which of 3 sets of formulas will be used for computing the amount of variable bandwidth to be allocated. Conservative allocates the full amount of variable bandwidth, Moderate allocates approximately half of…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.5
sfcsBwPortPoolLimitsBwConstantmandatory A ratio used in formulas for computing the amount of variable bandwidth to be allocated. Valid values are 1-255 which is the numerator of a fraction whose fixed denominator is 256. Thus the value 255 is really 255/256 …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.6
sfcsBwPortPoolLimitsCBRLimitFwdmandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to CBR. The values are 1-255. For a more detailed des…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.7
sfcsBwPortPoolLimitsCBRLimitRevmandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to CBR. The values are 1-255. For a more detailed des…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.8
sfcsBwPortPoolLimitsABRLimitFwdmandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to ABR. The values are 1-255. For a more detailed des…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.9
sfcsBwPortPoolLimitsABRLimitRevmandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to ABR. The values are 1-255. For a more detailed des…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.10
sfcsBwPortPoolLimitsVBRLimitFwdmandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to VBR. The values are 1-255. For a more detailed des…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.11
sfcsBwPortPoolLimitsVBRLimitRevmandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to VBR. The values are 1-255. For a more detailed des…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.12
sfcsBwPortPoolLimitsUBRLimitFwdmandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to UBR. The values are 1-255. For a more detailed des…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.13
sfcsBwPortPoolLimitsUBRLimitRevmandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to UBR. The values are 1-255. For a more detailed des…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.14
sfcsBwPortPoolLimitsUBRConnLimitFwdmandatory A Limit to the number of UBR connections which can be established through this port. The limit applies to both user connections and management connections. The default is no limit. (If it has never been set, the value w…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.15
sfcsBwPortPoolLimitsUBRConnLimitRevmandatory A Limit to the number of UBR connections which can be established through this port. The limit applies to both user connections and management connections. The default is no limit. (If it has never been set, the value …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.16

This table contains

sfcsBwPortPoolStatEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1

Each entry contains

Indexes

sfcsBwPortPoolStatsIndex sfcsBwPortPoolStatsPoolIndex

Column	Syntax	OID
sfcsBwPortPoolStatsIndexmandatory This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.1
sfcsBwPortPoolStatsPoolIndexmandatory This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.2
sfcsBwPortPoolStatConnCntFwdmandatory The current total number of calls in the forward direction.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.3
sfcsBwPortPoolStatConnCntRevmandatory The current total number of calls in the reverse direction.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.4
sfcsBwPortPoolStatAllocBwFwdmandatory The current amount of allocated Bw in the forward direction.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.5
sfcsBwPortPoolStatAllocBwRevmandatory The current amount of allocated Bw in the reverse direction.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.6
sfcsBwPortPoolStatAvailBwFwdmandatory The current amount of available Bw in the forward direction.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.7
sfcsBwPortPoolStatAvailBwRevmandatory The current amount of available Bw in the reverse direction.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.8
sfcsBwPortPoolStatPeakBwFwdmandatory The peak amount of allocated Bw in the forward direction since the port was initialized OR the switch was reset.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.9
sfcsBwPortPoolStatPeakBwRevmandatory The peak amount of allocated Bw in the reverse direction since the port was initialized OR the switch was reset.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.10
sfcsBwPortPoolStatRejConnFwdmandatory The number of connections which were rejected because of insufficient forward bandwidth since the port was initialized or the switch was reset last.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.11
sfcsBwPortPoolStatRejConnRevmandatory The number of connections which were rejected because of insufficient reverse bandwidth since the port was initialized or the switch was reset last.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.12
sfcsBwPortPoolStatPrevAdverMAXCRFwdmandatory The amount of physical forward BW reported to PNNI in the latest reporting period.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.13
sfcsBwPortPoolStatPrevAdverMAXCRRevmandatory The amount of physical reverse BW reported to PNNI in the latest reporting period.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.14
sfcsBwPortPoolStatPrevAdverAvailCRFwdmandatory The amount of avail forward BW reported to PNNI in the latest reporting period.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.15
sfcsBwPortPoolStatPrevAdverAvailCRRevmandatory The amount of avail reverse BW reported to PNNI in the latest reporting period.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.16
sfcsBwPortPoolStatCBRConnCntFwdmandatory The number of currently established CBR connections for the forward direction.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.17
sfcsBwPortPoolStatCBRConnCntRevmandatory The number of currently established CBR connections for the reverse direction.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.18
sfcsBwPortPoolStatCBRConnRejFwdmandatory The number of CBR forward connections rejected since the port was initialized or the switch was reset last.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.19
sfcsBwPortPoolStatCBRConnRejRevmandatory The number of CBR reverse connections rejected since the port was initialized or the switch was reset last.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.20
sfcsBwPortPoolStatCBRAllocBwFwdmandatory The amount of forward allocated Bw that is CBR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.21
sfcsBwPortPoolStatCBRAllocBwRevmandatory The amount of reverse allocated Bw that is CBR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.22
sfcsBwPortPoolStatCBRAggPCRFwdmandatory The aggregated forward PCR for all established CBR connections.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.23
sfcsBwPortPoolStatCBRAggPCRRevmandatory The aggregated reverse PCR for all established CBR connections.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.24
sfcsBwPortPoolStatCBRPrevAdverMAXCTDmandatory The maxCTD for the forward direction reported to PNNI for the last update period for CBR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.25
sfcsBwPortPoolStatCBRPrevAdverCDVmandatory The CDV for the forward direction reported to PNNI for the last update period for CBR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.26
sfcsBwPortPoolStatABRConnCntFwdmandatory The number of currently established ABR connections for the forward direction.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.27
sfcsBwPortPoolStatABRConnCntRevmandatory The number of currently established ABR connections for the reverse direction.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.28
sfcsBwPortPoolStatABRConnRejFwdmandatory The number of ABR forward connections rejected since the port was initialized or the switch was reset last.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.29
sfcsBwPortPoolStatABRConnRejRevmandatory The number of ABR reverse connections rejected since the port was initialized or the switch was reset last.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.30
sfcsBwPortPoolStatABRAllocBwFwdmandatory The amount of forward allocated Bw that is ABR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.31
sfcsBwPortPoolStatABRAllocBwRevmandatory The amount of reverse allocated Bw that is ABR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.32
sfcsBwPortPoolStatABRAggPCRFwdmandatory The aggregated forward PCR for all established ABR connections.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.33
sfcsBwPortPoolStatABRAggPCRRevmandatory The aggregated reverse PCR for all established ABR connections.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.34
sfcsBwPortPoolStatABRPrevAdverMAXCTDmandatory The maxCTD for the forward direction reported to PNNI for the last update period for ABR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.35
sfcsBwPortPoolStatABRPrevAdverCDVmandatory The CDV for the forward direction reported to PNNI for the last update period for ABR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.36
sfcsBwPortPoolStatVBRConnCntFwdmandatory The number of currently established VBR connections for the forward direction.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.37
sfcsBwPortPoolStatVBRConnCntRevmandatory The number of currently established VBR connections for the reverse direction.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.38
sfcsBwPortPoolStatVBRConnRejFwdmandatory The number of VBR forward connections rejected since the port was initialized or the switch was reset last.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.39
sfcsBwPortPoolStatVBRConnRejRevmandatory The number of VBR reverse connections rejected since the port was initialized or the switch was reset last.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.40
sfcsBwPortPoolStatVBRAllocBwFwdmandatory The amount of forward allocated Bw that is VBR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.41
sfcsBwPortPoolStatVBRAllocBwRevmandatory The amount of reverse allocated Bw that is VBR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.42
sfcsBwPortPoolStatVBRAggPCRFwdmandatory The aggregated forward PCR for all established VBR connections.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.43
sfcsBwPortPoolStatVBRAggPCRRevmandatory The aggregated reverse PCR for all established VBR connections.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.44
sfcsBwPortPoolStatVBRPrevAdverMAXCTDmandatory The maxCTD for the forward direction reported to PNNI for the last update period for VBR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.45
sfcsBwPortPoolStatVBRPrevAdverCDVmandatory The CDV for the forward direction reported to PNNI for the last update period for VBR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.46
sfcsBwPortPoolStatUBRConnCntFwdmandatory The number of currently established UBR connections for the forward direction.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.47
sfcsBwPortPoolStatUBRConnCntRevmandatory The number of currently established UBR connections for the reverse direction.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.48
sfcsBwPortPoolStatUBRConnRejFwdmandatory The number of UBR forward connections rejected since the port was initialized or the switch was reset last.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.49
sfcsBwPortPoolStatUBRConnRejRevmandatory The number of UBR reverse connections rejected since the port was initialized or the switch was reset last.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.50
sfcsBwPortPoolStatUBRAllocBwFwdmandatory The amount of forward allocated Bw that is UBR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.51
sfcsBwPortPoolStatUBRAllocBwRevmandatory The amount of reverse allocated Bw that is UBR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.52
sfcsBwPortPoolStatUBRAggPCRFwdmandatory The aggregated forward PCR for all established UBR connections.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.53
sfcsBwPortPoolStatUBRAggPCRRevmandatory The aggregated reverse PCR for all established UBR connections.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.54
sfcsBwPortPoolStatUBRPrevAdverMAXCTDmandatory The maxCTD for the forward direction reported to PNNI for the last update period for UBR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.55
sfcsBwPortPoolStatUBRPrevAdverCDVmandatory The CDV for the forward direction reported to PNNI for the last update period for UBR service class.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.56

This table contains

sfcsBwPortPoolTrapMgmtEntry row .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1

Each entry contains

Indexes

sfcsBwPortPoolTrapMgmtIndex sfcsBwPortPoolTrapMgmtPoolIndex

Column	Syntax	OID
sfcsBwPortPoolTrapMgmtIndexmandatory This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.1
sfcsBwPortPoolTrapMgmtPoolIndexmandatory This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index. (If it has never been set, the value will be -1.)	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.2
sfcsBwPortPoolTrapMgmtAllocBwTholdHiFwdmandatory The upper threshold for the Alloc BW fwd trap. When an allocation causes the currently allocated bw to exceed this value the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.3
sfcsBwPortPoolTrapMgmtAllocBwTholdHiRevmandatory The upper threshold for the Alloc BW rev trap. When an allocation causes the currently allocated bw to exceed this value the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.4
sfcsBwPortPoolTrapMgmtAllocBwTholdLoFwdmandatory The lower threshold for the Alloc BW fwd trap. When an allocation causes the currently allocated bw be below this value the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.5
sfcsBwPortPoolTrapMgmtAllocBwTholdLoRevmandatory The lower threshold for the Alloc BW rev trap. When an allocation causes the currently allocated bw be below this value the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.6
sfcsBwPortPoolTrapMgmtPeakBwTholdFwdmandatory The upper threshold for the Peak BW fwd trap. When an allocation causes the allocated BW to exceed this value the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.7
sfcsBwPortPoolTrapMgmtPeakBwTholdRevmandatory The upper threshold for the Peak BW rev trap. When an allocation causes the allocated BW to exceed this value the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.8
sfcsBwPortPoolTrapMgmtHoldDownTimemandatory The time between traps of the same type. If a trap of a particular type is generated for a particular port, another of that type for that port will not be generated until the hold down time has expired. (If it has never…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.9
sfcsBwPortPoolTrapMgmtCBRConnCntTholdHiFwdmandatory The upper threshold for the CBR connection count Fwd trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.10
sfcsBwPortPoolTrapMgmtCBRConnCntTholdHiRevmandatory The upper threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.11
sfcsBwPortPoolTrapMgmtCBRConnCntTholdLoFwdmandatory The lower threshold for the CBR connection count Fwd trap. When an allocation causes the CBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.12
sfcsBwPortPoolTrapMgmtCBRConnCntTholdLoRevmandatory The lower threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.13
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdHiFwdmandatory The upper threshold for the CBR Allocated Bw Fwd trap. When an allocation causes the CBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.14
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdHiRevmandatory The upper threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.15
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdLoFwdmandatory The lower threshold for the CBR Allocated Bw Fwd trap. When an allocation causes the CBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.16
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdLoRevmandatory The lower threshold for the CBR Allocated Bw Rev trap. When an allocation causes the CBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.17
sfcsBwPortPoolTrapMgmtABRConnCntTholdHiFwdmandatory The upper threshold for the ABR connection count Fwd trap. When an allocation causes the ABR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.18
sfcsBwPortPoolTrapMgmtABRConnCntTholdHiRevmandatory The upper threshold for the ABR connection count Rev trap. When an allocation causes the ABR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.19
sfcsBwPortPoolTrapMgmtABRConnCntTholdLoFwdmandatory The lower threshold for the ABR connection count Fwd trap. When an allocation causes the ABR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.20
sfcsBwPortPoolTrapMgmtABRConnCntTholdLoRevmandatory The lower threshold for the ABR connection count Rev trap. When an allocation causes the ABR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.21
sfcsBwPortPoolTrapMgmtABRAllocBwTholdHiFwdmandatory The upper threshold for the ABR Allocated Bw Fwd trap. When an allocation causes the ABR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.22
sfcsBwPortPoolTrapMgmtABRAllocBwTholdHiRevmandatory The upper threshold for the ABR Allocated Bw Rev trap. When an allocation causes the ABR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.23
sfcsBwPortPoolTrapMgmtABRAllocBwTholdLoFwdmandatory The lower threshold for the ABR Allocated Bw Fwd trap. When an allocation causes the ABR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.24
sfcsBwPortPoolTrapMgmtABRAllocBwTholdLoRevmandatory The lower threshold for the ABR Allocated Bw Rev trap. When an allocation causes the ABR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.25
sfcsBwPortPoolTrapMgmtVBRConnCntTholdHiFwdmandatory The upper threshold for the VBR connection count Fwd trap. When an allocation causes the VBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.26
sfcsBwPortPoolTrapMgmtVBRConnCntTholdHiRevmandatory The upper threshold for the VBR connection count Rev trap. When an allocation causes the VBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.27
sfcsBwPortPoolTrapMgmtVBRConnCntTholdLoFwdmandatory The lower threshold for the VBR connection count Fwd trap. When an allocation causes the VBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.28
sfcsBwPortPoolTrapMgmtVBRConnCntTholdLoRevmandatory The lower threshold for the VBR connection count Rev trap. When an allocation causes the VBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.29
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdHiFwdmandatory The upper threshold for the VBR Allocated Bw Fwd trap. When an allocation causes the VBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.30
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdHiRevmandatory The upper threshold for the VBR Allocated Bw Rev trap. When an allocation causes the VBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.31
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdLoFwdmandatory The lower threshold for the VBR Allocated Bw Fwd trap. When an allocation causes the VBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.32
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdLoRevmandatory The lower threshold for the VBR Allocated Bw Rev trap. When an allocation causes the VBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.33
sfcsBwPortPoolTrapMgmtUBRConnCntTholdHiFwdmandatory The upper threshold for the UBR connection count Fwd trap. When an allocation causes the UBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.34
sfcsBwPortPoolTrapMgmtUBRConnCntTholdHiRevmandatory The upper threshold for the UBR connection count Rev trap. When an allocation causes the UBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.35
sfcsBwPortPoolTrapMgmtUBRConnCntTholdLoFwdmandatory The lower threshold for the UBR connection count Fwd trap. When an allocation causes the UBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.36
sfcsBwPortPoolTrapMgmtUBRConnCntTholdLoRevmandatory The lower threshold for the UBR connection count Rev trap. When an allocation causes the UBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.37
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdHiFwdmandatory The upper threshold for the UBR Allocated Bw Fwd trap. When an allocation causes the UBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.38
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdHiRevmandatory The upper threshold for the UBR Allocated Bw Rev trap. When an allocation causes the UBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.39
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdLoFwdmandatory The lower threshold for the UBR Allocated Bw Fwd trap. When an allocation causes the UBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.40
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdLoRevmandatory The lower threshold for the UBR Allocated Bw Rev trap. When an allocation causes the UBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.41
sfcsBWPortPoolTrapMgmtBuffUpTholdmandatory The upper threshold for buffer allocation trap .	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.42
sfcsBWPortPoolTrapMgmtBuffLoTholdmandatory The lower threshold for buffer allocation trap .	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.43
sfcsBWPortPoolTrapMgmtConnRejTholdmandatory The lower threshold for conn rejects trap .	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.44