CTRON-REMOTE-ACCESS-MIB Table View

A list of the descriptions of the physical remote access
ports of this platform.

ctRemPhysPortEntry row .1.3.6.1.4.1.52.4.1.2.7.2.1.2.1

A physical port entry. It contains objects relating to a
given physical remote access port

Indexes

ctRemConnectionIndex

Column	Syntax	OID
ctRemConnectionIndexmandatory A value indicating the remote connection this entry is located on.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.1
ctRemPhysPortTypemandatory The type of physical port that this entry describes. None indicates that the physical port has no connector.	Enumeration Enumerated Values: 1 none 2 t1 3 e1 4 synchronous 5 dds 6 di 7 hdsl 8 isdnBRI 9 ds30 10 t1dds	.1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.2
ctRemPhysPortSpecificMibmandatory This object identifies an instance of the index object in the first group of objects in the MIB specific to the physical port.	ObjectIdentifier	.1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.3
ctRemPhysPortProtMgrTypemandatory This object identifies an instance of the type of Protocol Manager residing on this physical port. Before a physical port may be used, the type of manager must be designated. For example, if the physical port was goin…	Enumerationr/w Enumerated Values: 1 none 2 pppNailedUp 3 isdnPriPpp 4 isdnBriPpp 5 frameRelayPvcRtr 6 frameRelayPvcSw 7 hdlc	.1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.4
ctRemPhysPortProtMgrIfaceNummandatory This object identifies the interface number that will be assigned to the Protocol Managers IFO	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.5
ctRemPhysPortWanIfaceNummandatory This object identifies the interface number that will be assigned to the Wanio's IFO	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.6
ctRemPhysPortProtMgrMaxIfosmandatory This object identifies the maximum number of IFO's that can be created on this physical interface.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.7
ctRemPhysPortProtMgrIfaceListmandatory This object identifies a list of interfaces that will be assigned to this Protocol Managers data IFO's	RFC1213-MIBDisplayString	.1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.8
ctRemPhysAlarmTimeOutmandatory Whenever the physical port is configured for nailed-up PPP this object specifies the time the physical port must remain in a failed state as a condition to begin the backup procedure. The backup procedure is begun fo…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.9
ctRemPhysWpimTypemandatory This Mib object determines the Mode of operation that the T1/DDS Wpim module will function as. Setting a value of 1 will set the mode to DDS, setting a value of 2 will set the mode to T1.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.10

The interface table for Cabletron remote interfaces.
It is a list of items that are pertinant to the interfaces
that are part of remote physical ports. The number of 
entries is dependent upon the total number of remote 
interfaces configured.

ctRemInterfaceEntry row .1.3.6.1.4.1.52.4.1.2.7.2.1.3.1

A remote interface entry. It
contains objects relating to an interface that is defined
for remote Cabletron products.

Indexes

ctRemIntEntIfIndex

Column	Syntax	OID
ctRemIntEntIfIndexmandatory The ifIndex of the interface. This is the index of this entry in the ifTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.1
ctRemIntEntCompressionmandatory This flag will indicate whether compression should take place on this interface.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.2
ctRemIntEntCompRatiomandatory This string indicates the current compression ratio on this interface.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.3
ctRemIntEntCompStatusmandatory This flag will indicate whether compression has been nogotiated on this interface.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.4
ctRemIntEntMTUmandatory The MTU to be negotiated for this interface. This will not be updated with the actual MTU, which can be found in the ifTable.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.5
ctRemIntEntCongestionmandatory This object identifies the Leaky Bucket algorithm flag for a Frame Relay circuit on this intertface. The option is supported when this flag is enabled, and not supported when this flag is disabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.6
ctRemIntEntMaxProfilesmandatory This object specifies the maximum number of neighbor profiles. A neighbor profile describes a possible connection. The maximum should be set to account for support of PPP multilink. That is to say, if PPP multilink is b…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.7
ctRemIntEntTxIdleTimeoutmandatory This object identifies the idle timeout value in which a packet needs to be transmitted before the interface is automatically disconnected. Allowed values are in increments of five seconds including zero.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.8
ctRemIntEntRxIdleTimeoutmandatory This object identifies the idle timeout in which a packet needs to be received before the interface is automatically disconnected. Allowed values are in increments of five seconds including zero.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.9
ctRemIntEntCircuitNamemandatory This object associates a circuit name with a specific interface.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.10
ctRemIntEntEncryptionmandatory This flag will indicate whether encryption should take place on this interface.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.11
ctRemIntEntEncryptStatusmandatory This flag will indicate whether Encryption has been nogotiated on this interface.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.52.4.1.2.7.2.1.3.1.12

The interface table for Cabletron remote interfaces.
It is a list of items that are pertinant to the interfaces
that are part of remote physical ports. The number of 
entries is dependent upon the total number of remote 
interfaces configured.

ctRemPrimaryInterfaceEntry row .1.3.6.1.4.1.52.4.1.2.7.2.1.4.1

A remote interface entry. It
contains objects relating to an interface that is defined
for remote Cabletron products.

Indexes

ctRemPriIntEntIfIndex

Column	Syntax	OID
ctRemPriIntEntIfIndexmandatory The ifIndex of the interface. This is the index of this entry in the ifTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.4.1.1
ctRemPriIntEntConnectRetryIntervalmandatory This object specifies the interval in seconds between retries for restoring the primary interface.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.4.1.2

The interface table for Cabletron remote interfaces.
It is a list of items that are pertinant to the interfaces
that are part of remote physical ports. The number of 
entries is dependent upon the total number of remote 
interfaces configured.

ctRemBackupInterfaceEntry row .1.3.6.1.4.1.52.4.1.2.7.2.1.5.1

A remote interface entry. It
contains objects relating to an interface that is defined
for remote Cabletron products.

Indexes

ctRemIntEntBackupIfIndex

Column	Syntax	OID
ctRemIntEntBackupIfIndexmandatory The ifIndex of the interface. This is the index of this entry in the ifTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.1
ctRemIntEntBackupIfNummandatory This object identifies which ifIndex will backup this interface in the event of a communications failure.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.2
ctRemIntEntBackupIfInUseCntmandatory This object identifies how many other interfaces this interface will backup.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.3
ctRemIntEntBackupIfTimeToConnectmandatory This object identifies how long to wait in seconds before attempting to switchover to the backup interface. Allowed values are in increments of five seconds including zero.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.4
ctRemIntEntBackupIfTimeToDisconnectmandatory This object identifies how long to wait in seconds before attempting to switchover to the primary interface. Allowed values are in increments of five seconds including zero.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.5
ctRemIntEntBackupIfOverridemandatory This object identifies if the interface will switch back to the primary link after it has become active again. A force condition will not allow the interface to switch back.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.6
ctRemIntEntBackupConnectRetriesmandatory This object specifies the number of tries to bring-up the backup interface before giving up.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.7
ctRemIntEntBackupConnectRetryIntervalmandatory This object specifies the interval in seconds between retries for bringing up backup interface before giving up.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.5.1.8

A list of the descriptions of the physical remote access
ports of this platform.

ctRemExtPhysPortEntry row .1.3.6.1.4.1.52.4.1.2.7.2.1.6.1

A physical port entry. It contains objects relating to a
given physical remote access port

Indexes

ctRemExtConnectionIndex

Column	Syntax	OID
ctRemExtConnectionIndexmandatory A value indicating the remote connection this entry is located on.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.1
ctRemExtProtMgrIndexmandatory A value indicating the protMgr number for this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.2
ctRemExtPhysPortProtMgrTypemandatory This object identifies an instance of the type of Protocol Manager residing on this physical port. Before a physical port may be used, the type of manager must be designated. For example, if the physical port was goin…	Enumerationr/w Enumerated Values: 1 none 2 pppNailedUp 3 isdnPriPpp 4 isdnBriPpp 5 frameRelayPvcRtr 6 frameRelayPvcSw 7 hdlc	.1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.3
ctRemExtPhysPortProtMgrEnablemandatory This object identifies an instance of the the enable flag of Protocol Manager residing on this physical port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.4
ctRemExtPhysPortProtMgrIfaceNummandatory This object identifies the interface number that will be assigned to the Protocol Managers IFO	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.5
ctRemExtPhysPortProtMgrMaxIfosmandatory This object identifies the maximum number of IFO's that can be created on this physical interface.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.6
ctRemExtPhysPortProtMgrIfaceListmandatory This object identifies a list of interfaces that will be assigned to this Protocol Managers data IFO's	RFC1213-MIBDisplayString	.1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.7
ctRemExtPhysPortProtMgrChannelListmandatory This object identifies a list of channles/timeslots that will be assigned to this Protocol Managers data IFO's	RFC1213-MIBDisplayString	.1.3.6.1.4.1.52.4.1.2.7.2.1.6.1.8

This table is an extension to the standard ds1 configuration
table. It is a list of items that are pertinant to ds1 ports
on a platform. There is one entry per ds1 physical port on
the platform.

ctDs1ExtensionsEntry row .1.3.6.1.4.1.52.4.1.2.7.2.2.1.1

A ds1 extensions entry containing objects relating to
the particular ds1 physical port.

Indexes

ctDs1ExtensionsEntryIndex

Column	Syntax	OID
ctDs1ExtensionsEntryIndexmandatory A unique value for each ds1 physical port on the platform.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.1
ctDs1ExtensionsNumInterfacesmandatory The number of interfaces on this physical port. This number inidicates the number of entries this physical port uses in the ifTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.2
ctDs1ExtensionsToggleFracTablemandatory Setting this object to 1 will cause the Ds1 Fractional Table to be updated with the new values, as entered. Setting this object to 2, will cause the Ds1 Fractional Table to view as the table being enter…	Enumerationr/w Enumerated Values: 1 update-table 2 display-new 3 display-old 4 restore-old	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.3
ctDs1ExtensionsLineBuildOutmandatory The line build out setting for this ds1 physical port. Unknown indicates that the setting is neither readable or writable.	Enumerationr/w Enumerated Values: 1 unknown 2 zero 3 minus-7point5 4 minus-15 5 a133to266feet 6 a266to399feet 7 a399to533feet 8 a533to655feet	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.4
ctDs1ExtensionsCFADurationmandatory The length of time (in seconds), that the ds1 port will remain in the Carrier Failure Alarm state after the alarm condition has cleared. For those Ds1 ports not supporting Carrier Failure Alarm duration, this object al…	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.5
ctDs1ExtensionsDIEnablemandatory Enables or disables Drop and Insert functionality on a D/I WPIM. If enabled, all zero assigned timeslots will designate D/I interface channels, if disabled all zero channels will designate dummy channels as on a T1 o…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.6
ctDs1ExtensionsTotalValidIntervalsmandatory The number of previous intervals for which valid data was collected for the DS1 mib, which is currently RFC1406. This counter is similar to RFC1406 dsx1ValidIntervals except that the count represents the total numb…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.7
wanDs1ExtensionsBertTestModemandatory This object is used to request that a type of process be in control of the testing function. This is used to differentiate between automated test procedures and those manually controlled by a user. When read, this ob…	Enumerationr/w Enumerated Values: 1 none 2 internal 3 manual	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.8
wanDs1ExtensionsBertRunmandatory Controls the sending of test data over this physical port. The data is a pattern described by wanDs1ExtensionsBertTestPattern.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.9
wanDs1ExtensionsBertCurrentResultsmandatory Indicates the results of the testing for the last completed sampling period. A non-negative number is the error rate in bits per million bits.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.10
wanDs1ExtensionsBertCumulativeResultsmandatory Indicates the total number of errors since the testing was enabled. It is not a rate.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.11
wanDs1ExtensionsBertPeakResultsmandatory Indicates the highest value of wanDs1ExtensionsBertCurrentResults since the testing was enabled. A non-negative number is the error rate in bits per million bits.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.12
wanDs1ExtensionsBertAverageResultmandatory Indicates the average value of wanDs1ExtensionsBertCurrentResults since the testing was enabled. A non-negative number is the error rate in bits per million bits.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.13
wanDs1ExtensionsBertTestPatternmandatory This object is used to specify the pattern of the test data.	Enumerationr/w Enumerated Values: 1 patternOther 2 pattern1s 3 pattern63 4 pattern511 5 pattern2047 6 pattern3in24 7 patternQRSS	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.14
wanDs1ExtensionsBertSamplePeriodmandatory This object is the duration of time in seconds at which the current test results will be periodically written to wanDs1ExtensionsBertCurrentResults. The range is 1 to 3600, with a default value of 10.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.15
wanDs1ExtensionsBertNumPeriodsmandatory The number of sampling periods that have elapsed during the current test run.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.16
wanDs1ExtensionsBertTestTrapsmandatory This object is used to enable or disable the sending of a trap at the conclusion of the measurement period. The trap will contain the information described by ctDs1BertCurrentResults. The default value is disabled.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.17
wanDs1ExtensionsBertDataStatusmandatory This object provides the operating status of the transmission of test data packets.	Enumeration Enumerated Values: 1 idle 2 waitingForLink 3 waitingForLoopback 4 running	.1.3.6.1.4.1.52.4.1.2.7.2.2.1.1.18

This table is an extension to the standard ds1 
configuration table. It is a list of items that are 
pertinant to the hdlc driver on a platform. There is 
one entry per ds1 physical port on the platform.

ctDs1WanDriverEntry row .1.3.6.1.4.1.52.4.1.2.7.2.2.2.1

A ds1 wan driver entry containing objects relating to
the particular ds1 physical port pertaining to a specific
channel on the wan driver chip.

Indexes

ctDs1WanDriverEntryIndex ctDs1WanDriverChannelIndex

Column	Syntax	OID
ctDs1WanDriverEntryIndexmandatory A unique value for each ds1 physical port on the platform.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.1
ctDs1WanDriverChannelIndexmandatory A unique value for each channel on a wan driver on the platform.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.2
ctDs1WanDriverLineCodemandatory This object controls the individual channels line coding on a wan driver device on the platform.	Enumerationr/w Enumerated Values: 1 none 2 jBZS 3 invHDLC	.1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.3
ctDs1WanDriverCRCBitsmandatory This object controls the individual channels CRC bits generation on a wan driver device on the platform.	Enumerationr/w Enumerated Values: 1 crc16 2 crc32	.1.3.6.1.4.1.52.4.1.2.7.2.2.2.1.4

This table is an extension to the standard rs232-like mib.
It is a list of items that are pertinant to rs232-like ports
on a platform. There is one entry per synchronous physical
port on the platform.

ctRs232ExtensionsEntry row .1.3.6.1.4.1.52.4.1.2.7.2.3.1.1

A rs232-like extensions entry containing objects relating
to the particular rs232-like physical port.

Indexes

ctRs232ExtensionsEntryIndex

Column	Syntax	OID
ctRs232ExtensionsEntryIndexmandatory A unique value for each rs232-like physical port on the platform.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.1
ctRs232ExtensionsCTSEnablemandatory This object indicates whether the platform should generate CTS. When disabled the platform will not generate CTS, when enabled, the platform will generate CTS. The actual state of the CTS line is available in the …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.2
ctRs232ExtensionsDSREnablemandatory This object indicates whether the platform should generate DSR. When disabled the platform will not generate DSR, when enabled, the platform will generate DSR. The actual state of the DSR line is available in the r…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.3
ctRs232ExtensionsRTSEnablemandatory This object indicates whether the platform should generate RTS. When disabled the platform will not generate RTS, when enabled, the platform will generate RTS. The actual state of the RTS line is available in the …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.4
ctRs232ExtensionsDTREnablemandatory This object indicates whether the platform should generate DTR. When disabled the platform will not generate DSR, when enabled, the platform will generate DTR. The actual state of the DTR line is available in the r…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.52.4.1.2.7.2.3.1.1.5

A table containing data compression information about 
specific Data Link Connection Identifiers and 
corresponding virtual circuit. This information is used 
to support the frCircuitTable following RFC-1315.

frDcpCircuitEntry row .1.3.6.1.4.1.52.4.1.2.7.2.4.1.1

The data compression information regarding a single Data
Link Connection Identifier.

Indexes

frDcpCircuitIfIndex frDcpCircuitDlci

Column	Syntax	OID
frDcpCircuitIfIndexmandatory The ifIndex value of ifEntry that this DCP virtual circuit object is layered onto.	Index	.1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.1
frDcpCircuitDlcimandatory The Data Link Connection Identifier for this DCP virtual circuit object.	DLCI	.1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.2
frDcpCircuitEnablemandatory Indicates whether data compression should take place on this particular end side virtual circuit.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.3
frDcpCircuitStatusmandatory On indicates that the compression has been successfully negotiated and is operating. Off indicates that the compression negotiation has failed and compression is not operating at this time, or compression has been termi…	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.4
frDcpCircuitRatiomandatory The ratio of uncompressed to compressed transmitted data. If the data compression status is off, 1:1 will be displayed.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.52.4.1.2.7.2.4.1.1.5

The DDS Configuration Table

ctDDSConfigEntry row .1.3.6.1.4.1.52.4.1.2.7.2.5.1.1

An Entry in the DDS Configuration Table

Indexes

ctDDSLineIndex

Column	Syntax	OID
ctDDSLineIndexmandatory A unique value for each ds1 physical port on the platform.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.1
ctDDSIfIndexmandatory Index associated with this dds physical port	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.2
ctDDSLineModemandatory DDS-PRI is full duplex 56k link, No framing in loop data so loop speed is also 56k. Data stream: --d1 d2 d3 d4 d5 d6 d7-- DDS-SC is also full duplex 56k link, requires framing bits to distinguish betwee…	Enumerationr/w Enumerated Values: 1 ddsPri 2 ddsSc 3 ddsCc	.1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.3
ctDDSLineCodingmandatory This object describes the variety of Zero Code suppression on this interface. JBZS refers to Jammed Bit Zero suppresion, which forces a 1 bit every 8 bit periods. None refers to a mode in which some other means is …	Enumerationr/w Enumerated Values: 1 ddsNone 2 ddsJBZS 3 otherLineCode	.1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.4
ctDDSLoopbackConfigmandatory This variable represents the loopback configuration of the DDS interface. ddsNoLoop means the interface is not in loopback state, ddsLocalLoop means the signal is transmitted and looped back to the same interface, …	Enumerationr/w Enumerated Values: 1 ddsNoLoop 2 ddsLocalLoop 3 ddsLineLoop 4 ddsOtherLoop	.1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.5
ctDDSLineStatusmandatory This variable describes the current operational status of DDS line.	Enumeration Enumerated Values: 1 ddsNoAlarm 2 ddsLossOfSignal 3 ddsOutOfService 4 ddsOutOfFrame	.1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.6
ctDDSTxClockSourcemandatory The source of Transmit clock. 'ddsLoopTiming' indicates that the recovered receive clock is used as transmit clock. 'ddsLocalTiming' indicates that a local clock source is used. 'ddsThroug…	Enumerationr/w Enumerated Values: 1 ddsLoopTiming 2 ddsLocalTiming 3 ddsThroughTiming	.1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.7
ctDDSPortInSpeedmandatory This variable describes the current operational receive speed of DDS line. It is a read only value based entirely on DDS type (CC or PRI).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.8
ctDDSPortOutSpeedmandatory This variable describes the current operational transmit speed of DDS line. It is a read only value based entirely on DDS type CC or PRI	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.5.1.1.9

Table containing the parameters for the local
PPP entity related to the counters and timers.

ctPppCountersEntry row .1.3.6.1.4.1.52.4.1.2.7.2.6.1.1

PPP counter/timer information for a particular
PPP link.

Indexes

ctPppCountersIfIndex

Column	Syntax	OID
ctPppCountersIfIndexmandatory The ifIndex of the interface. This is the index of this entry in the ifTable.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.1
ctPppCountersMaxTerminatemandatory MaxTerminate indicates the number of Terminate- Request packets sent without receiving a Terminate-Ack before assuming that the peer in unable to respond.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.2
ctPppCountersMaxConfiguremandatory MaxConfigure indicates the number of Configure- Request packets sent without receiving a Configure-Ack, Configre-Nak or Configure-Reject before assuming that the peer in unable to respond.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.3
ctPppCountersMaxFailuremandatory MaxFailure indicates the number of Configure-Nak packets sent without sending a Configure-Ack before assuming that the configuration is not converging. Any further Configure-Reject packets for peer requested options ar…	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.4
ctPppCountersRestartTimermandatory The Restart timer is used to time transmissions of Configure-Request and Terminate-Request packets. Expiration of the Restart-Timer causes a Timeout event, and retransmission of the corresponding Configure-Request or Te…	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.6.1.1.5

Table containing the parameters for the local
PPP entity related to the counters and timers.

ctPppLcpExtEntry row .1.3.6.1.4.1.52.4.1.2.7.2.6.2.1

PPP LCP configurationinformation for a particular
PPP link.

Indexes

ctPppLcpExtIfIndex

Column	Syntax	OID
ctPppLcpExtIfIndexmandatory The ifIndex of the interface. This is the index of this entry in the ifTable.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.1
ctPppLcpExtAuthenticationProtmandatory Enables a particular authentication protocol on this PPP link(now modified for read-only.	Enumeration Enumerated Values: 1 none 2 pap 3 chap	.1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.2
ctPppLcpExtQualityProtmandatory Enables a particular link-quality protocol on this PPP link.	Enumerationr/w Enumerated Values: 1 none 2 lqr	.1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.3
ctPppLcpExtPFCmandatory Enables protocol field compression on this PPP link.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.4
ctPppLcpExtACFCmandatory Enables address and control field compression on this PPP link.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.5
ctPppLcpExtSelfDescribePaddingmandatory This Configuration Option provides a method for an implementation to indicate to the peer that it understands self-describing pads when padding is added at the end of the PPP Information field.	Integer32r/w Constraints: range: 1-256	.1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.6
ctPppLcpExtCallbackmandatory This Configuration Option provides a method for an implementation to request a dial-up peer to call back.	Integer32r/w Constraints: range: 1-6	.1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.7
ctPppLcpExtCompoundFramesmandatory This Configuration Option provides a method for an implementation to send multiple PPP encapsulated packets within the same frame.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.8
ctPppLcpExtMrumandatory Enables and disables Mru status.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.9
ctPppLcpExtAccmmandatory Enables and disables Accm status.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.10
ctPppLcpExtEchoRequestmandatory A zero indicated no Echo Request and any other value provides an interval to send Echo-Requests to the Peer. The Echo-Request provides a Data Link Layer loopback mechanism for use in exercising both directions of the li…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.11
ctPppLcpExtReplyCountermandatory Increments a counter if the Local Device correctly received an Echo-Reply from the Peer. LCP MUST be in the OPENED state for an Echo-Reply to occur.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.12
ctPppLcpExtMpCapablemandatory Multilink Protocol (MP) option selector. Set to a value of one when MP support is desired otherwise set to a value of two. The default value is two. When set to two the attempt is made to negotiate MP support. MP su…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.1.2.7.2.6.2.1.13

Table containing the parameters for the local
PPP entity related to the counters and timers.

ctPppBncpExtEntry row .1.3.6.1.4.1.52.4.1.2.7.2.6.3.1

PPP LCP configuration information for a particular
PPP link.

Indexes

ctPppBncpExtIfIndex

Column	Syntax	OID
ctPppBncpExtIfIndexmandatory The ifIndex of the interface. This is the index of this entry in the ifTable.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.6.3.1.1
ctPppBncpExtCrcStatusmandatory Enables and disables CRC status. First our platform must support CRC. If the platform does, then setting to disabled will not send CRC. The default is enabled, which sends CRC.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.1.2.7.2.6.3.1.2

Table containing the parameters for the local
PPP entity related to the counters and timers.

ctPppMpExtEntry row .1.3.6.1.4.1.52.4.1.2.7.2.6.4.1

PPP LCP configurationinformation for a particular
PPP link.

Indexes

ctPppMpExtIfIndex

Column	Syntax	OID
ctPppMpExtIfIndexmandatory The ifIndex of the interface. This is the index of this entry in the ifTable.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.1
ctPppLcpExtMpLUTmandatory Used to set the Line Utilization Threshold (LUT) % value to compare against the linear weighted percentage by which to determine when more/less bandwidth is to be added/removed. Linear weighting is averaged over the …	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.2
ctPppLcpExtMpHistoryTimemandatory Used to set the history time value in seconds for the number of line utilization reading(s) desired to compute the average line utilization. That is to say, it specifies the window size over which to compute the aver…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.3
ctPppLcpExtMpMoreBWmandatory Used to set the number of consecutive line utilization average readings that must exceed ctPppLcpExtMpLUT as a condition of when to increase the bandwidth if more BW is permitted.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.4
ctPppLcpExtMpLessBWmandatory Used to set the number of consecutive line utilization average readings that must fall below ctPppLcpExtMpLUT as a condition of when to remove possible previously added bandwidth.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.5
ctPppLcpExtMpMaxChannelsmandatory Used to set the maxium number of channels an MP capable connection is allowed.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.6
ctPppLcpExtMpChannelsToAddmandatory Used to set the number of additional channel(s) to increment by whenever the need for more bandwidth is determined.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.7
ctPppLcpExtMpChannelsToRemovemandatory Used to set the number of channel(s) to decrement by whenever the need for possible previously added bandwidth is determined to no longer be needed.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.7.2.6.4.1.8

Table containing the parameters for the local
PPP entity related to the encrpytion control protocol.

ctPppEcpExtEntry row .1.3.6.1.4.1.52.4.1.2.7.2.6.5.1

PPP ECP configuration information for a particular
PPP link.

Indexes

ctPppEcpExtIfIndex

Column	Syntax	OID
ctPppEcpExtIfIndexmandatory The ifIndex of the interface. This is the index of this entry in the ifTable.	Integer32r/w Constraints: range: 1-1024	.1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.1
ctPppEcpKeymandatory A 56-bit key (14 hex characters) used for the DES encryption.	OctetStringr/w Constraints: range: 14-14	.1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.2
ctPppEcpIVmandatory A 64-bit initialization vector (16 hex characters) used for the DES encryption in CBC mode.	OctetStringr/w Constraints: range: 16-16	.1.3.6.1.4.1.52.4.1.2.7.2.6.5.1.3

Table containing the parameters for the local
Wanalyzer entity related to the configured Protocol.

ctWanalyzerEntry row .1.3.6.1.4.1.52.4.1.2.7.2.7.1.1

Information for a particular
interface.

Indexes

ctWanalyzerIfIndex

Column	Syntax	OID
ctWanalyzerIfIndexmandatory The ifIndex of the interface. This is the index of this entry in the ifTable.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.1
ctWanalyzerEnabledmandatory This Persistent Object is a flag which indicates whether or not the WANalyzer is enabled or disabled. Upon system initialization this flag defaults to disabled unless a value for this object is found in NVRAM.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.2
ctWanalyzerMaxEntriesmandatory This Persistent Object is an integer greater than 1 which specifies the maximum total number of entries which the table will handle. When the WANalyzer is enabled this value defaults to a value dependent on the implem…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.3
ctWanalyzerClearAllmandatory When set to 2, the entire table of entries is cleared. Upon clearing of the table, this value is reset to 1. This object is not present if the WANalyzer is disabled.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.4
ctWanalyzerClearInterfacemandatory When set to 2, all entries for this MIB-II interface index will be removed from the table. Upon complete removal of those entries, this value is reset to 1. This object is not present if the WANalyzer is disabled.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.5
ctWanalyzerDisplayInterfacemandatory When set to a valid MIB-II interface number, the table displays only those entries in the table which were received from that MIB-II interface. This value is set to -1 upon initialization and indicates that entries from…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.6
ctWanalyzerCurrEntriesmandatory A non-negative integer indicating the current number of entries in the table. This object is not present if the WANalyzer is disabled.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.7.1.1.7

A table containing all of the message entries for this 
device. If the WANalyzer is disabled, this table will
not be present.

wanalyzerEntry row .1.3.6.1.4.1.52.4.1.2.7.2.7.2.1

A message entry in the WANalyzer table corresponding
to a particular interface in a particular instance.

Indexes

wanMessageIndex

Column	Syntax	OID
wanMessageIndexmandatory An integer between 1 and wanalyzerMaxEntries which indicates the overall position this entry has in the WANalyzer table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.1
wanMessageInterfaceIndexmandatory The MIB-II interface index representing the interface which sent this message.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.2
wanMessageDatemandatory The date when this message was received by the WANalyzer in the standard MMDDYY format.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.3
wanMessageTimemandatory The time of day when this message was received by the WANalyzer in the standard HHMMSS format.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.4
wanMessageCodemandatory An enumerated value representing the nature of the debug message sent by the interface.	Enumeration Enumerated Values: 1 wanalyzerLastMessageRepeated 2 pppAuthentication 3 pppBncpThisLayerStart 4 pppBncpThisLayerFinished 5 pppBncpThisLayerUp 6 pppBncpThisLayerDown 7 pppBncpInitializeRestartCount 8 pppBncpZeroRestartCount 9 pppBncpRcvConfReqGood 10 pppBncpRcvConfReqBad 11 pppBncpReceiveConfigureAck 12 pppBncpReceiveConfigureNak 13 pppBncpReceiveConfigureReject 14 pppBncpReceiveTerminateRequest 15 pppBncpReceiveTerminateAck 16 pppBncpReceiveCodeRejectPermitted 17 pppBncpReceiveCodeRejectCatastrophic 18 pppBncpReceiveProtocolRejectPermitted 19 pppBncpReceiveEchoRequest 20 pppBncpReceiveEchoReply 21 pppBncpReceiveDiscardRequest 22 pppBncpReceiveUnknownCode 23 pppBncpIllegalAction 24 pppBncpSendConfigureRequest 25 pppBncpSendConfigureAck 26 pppBncpSendConfigureNak 27 pppBncpSendConfigureReject 28 pppBncpSendTerminateRequest 29 pppBncpSendTerminateAck 30 pppBncpSendCodeReject 31 pppBncpSendProtocolReject 32 pppBncpSendEchoReply 33 pppBncpInitialState 34 pppBncpStartingState 35 pppBncpClosedState 36 pppBncpStoppedState 37 pppBncpClosingState 38 pppBncpStoppingState 39 pppBncpReqSentState 40 pppBncpAckRcvdState 41 pppBncpAckSentState 42 pppBncpOpenedState 43 pppBncpEthernetMacType 44 pppBncpTokenRingMacType 45 pppBncpFddiMacType 46 pppBncpBridgeIdRcvReq 47 pppBncpBridgeIdRcvNak 48 pppBncpBridgeIdRcvRej 49 pppBncpBridgeIdXmitReq 50 pppBncpMacSelectRcvReq 51 pppBncpMacSelectRcvNak 52 pppBncpMacSelectRcvRej 53 pppBncpMacSelectXmitReq 54 pppBncpTinygramRcvReq 55 pppBncpTinygramRcvNak 56 pppBncpTinygramRcvRej 57 pppBncpTinygramXmitReq 58 pppBncpLanIdRcvReq 59 pppBncpLanIdRcvNak 60 pppBncpLanIdRcvRej 61 pppBncpLanIdXmitReq 62 pppCcpThisLayerStart 63 pppCcpThisLayerFinished 64 pppCcpThisLayerUp 65 pppCcpThisLayerDown 66 pppCcpInitializeRestartCount 67 pppCcpZeroRestartCount 68 pppCcpRcvConfReqGood 69 pppCcpRcvConfReqBad 70 pppCcpReceiveConfigureAck 71 pppCcpReceiveConfigureNak 72 pppCcpReceiveConfigureReject 73 pppCcpReceiveTerminateRequest 74 pppCcpReceiveTerminateAck 75 pppCcpReceiveCodeRejectPermitted 76 pppCcpReceiveCodeRejectCatastrophic 77 pppCcpReceiveProtocolRejectPermitted 78 pppCcpReceiveEchoRequest 79 pppCcpReceiveEchoReply 80 pppCcpReceiveDiscardRequest 81 pppCcpReceiveUnknownCode 82 pppCcpIllegalAction 83 pppCcpSendConfigureRequest 84 pppCcpSendConfigureAck 85 pppCcpSendConfigureNak 86 pppCcpSendConfigureReject 87 pppCcpSendTerminateRequest 88 pppCcpSendTerminateAck 89 pppCcpSendCodeReject 90 pppCcpSendProtocolReject 91 pppCcpSendEchoReply 92 pppCcpInitialState 93 pppCcpStartingState 94 pppCcpClosedState 95 pppCcpStoppedState 96 pppCcpClosingState 97 pppCcpStoppingState 98 pppCcpReqSentState 99 pppCcpAckRcvdState 100 pppCcpAckSentState 101 pppCcpOpenedState 102 pppCcpProprietaryCompRcvReq 103 pppCcpProprietaryCompRcvNak 104 pppCcpProprietaryCompRcvRej 105 pppCcpProprietaryCompXmitReq 106 pppCcpPredictorType1RcvReq 107 pppCcpPredictorType1RcvNak 108 pppCcpPredictorType1RcvRej 109 pppCcpPredictorType1XmitReq 110 pppCcpPredictorType2RcvReq 111 pppCcpPredictorType2RcvNak 112 pppCcpPredictorType2RcvRej 113 pppCcpPredictorType2XmitReq 114 pppCcpPuddleJumperRcvReq 115 pppCcpPuddleJumperRcvNak 116 pppCcpPuddleJumperRcvRej 117 pppCcpPuddleJumperXmitReq 118 pppCcpHpPpcRcvReq 119 pppCcpHpPpcRcvNak 120 pppCcpHpPpcRcvRej 121 pppCcpHpPpcXmitReq 122 pppCcpStacLzsRcvReq 123 pppCcpStacLzsRcvNak 124 pppCcpStacLzsRcvRej 125 pppCcpStacLzsXmitReq 126 pppCcpMsPpcRcvReq 127 pppCcpMsPpcRcvNak 128 pppCcpMsPpcRcvRej 129 pppCcpMsPpcXmitReq 130 pppCcpGandalfFzaRcvReq 131 pppCcpGandalfFzaRcvNak 132 pppCcpGandalfFzaRcvRej 133 pppCcpGandalfFzaXmitReq 134 pppCcpV42bisRcvReq 135 pppCcpV42bisRcvNak 136 pppCcpV42bisRcvRej 137 pppCcpV42bisXmitReq 138 pppCcpBsdLzwRcvReq 139 pppCcpBsdLzwRcvNak 140 pppCcpBsdLzwRcvRej 141 pppCcpBsdLzwXmitReq 142 pppCcpStackDcpRcvReq 143 pppCcpStackDcpRcvNak 144 pppCcpStackDcpRcvRej 145 pppCcpStackDcpXmitReq 146 pppChapChallengeReceived 147 pppChapResponseReceived 148 pppChapSuccessReceived 149 pppChapFailureReceived 150 pppChapSuccessSent 151 pppChapFailureSent 152 pppChapChallengeSent 153 pppChapResponseSent 154 pppIpcpThisLayerStart 155 pppIpcpThisLayerFinished 156 pppIpcpThisLayerUp 157 pppIpcpThisLayerDown 158 pppIpcpInitializeRestartCount 159 pppIpcpZeroRestartCount 160 pppIpcpRcvConfReqGood 161 pppIpcpRcvConfReqBad 162 pppIpcpReceiveConfigureAck 163 pppIpcpReceiveConfigureNak 164 pppIpcpReceiveConfigureReject 165 pppIpcpReceiveTerminateRequest 166 pppIpcpReceiveTerminateAck 167 pppIpcpReceiveCodeRejectPermitted 168 pppIpcpReceiveCodeRejectCatastrophic 169 pppIpcpReceiveProtocolRejectPermitted 170 pppIpcpReceiveEchoRequest 171 pppIpcpReceiveEchoReply 172 pppIpcpReceiveDiscardRequest 173 pppIpcpReceiveUnknownCode 174 pppIpcpIllegalAction 175 pppIpcpSendConfigureRequest 176 pppIpcpSendConfigureAck 177 pppIpcpSendConfigureNak 178 pppIpcpSendConfigureReject 179 pppIpcpSendTerminateRequest 180 pppIpcpSendTerminateAck 181 pppIpcpSendCodeReject 182 pppIpcpSendProtocolReject 183 pppIpcpSendEchoReply 184 pppIpcpInitialState 185 pppIpcpStartingState 186 pppIpcpClosedState 187 pppIpcpStoppedState 188 pppIpcpClosingState 189 pppIpcpStoppingState 190 pppIpcpReqSentState 191 pppIpcpAckRcvdState 192 pppIpcpAckSentState 193 pppIpcpOpenedState 194 pppIpcpIpAddressRcvReq 195 pppIpcpIpAddressRcvNak 196 pppIpcpIpAddressRcvRej 197 pppIpcpIpAddressXmitReq 198 pppIpcpCompressionTypeRcvReq 199 pppIpcpCompressionTypeRcvRej 200 pppIpcpCompressionTypeRcvNak 201 pppIpcpCompressionTypeXmitReq 202 pppIpxcpThisLayerStart 203 pppIpxcpThisLayerFinished 204 pppIpxcpThisLayerUp 205 pppIpxcpThisLayerDown 206 pppIpxcpInitializeRestartCount 207 pppIpxcpZeroRestartCount 208 pppIpxcpRcvConfReqGood 209 pppIpxcpRcvConfReqBad 210 pppIpxcpReceiveConfigureAck 211 pppIpxcpReceiveConfigureNak 212 pppIpxcpReceiveConfigureReject 214 pppIpxcpReceiveTerminateAck 215 pppIpxcpReceiveCodeRejectPermitted 216 pppIpxcpReceiveCodeRejectCatastrophic 217 pppIpxcpReceiveProtocolRejectPermitted 218 pppIpxcpReceiveEchoRequest 219 pppIpxcpReceiveEchoReply 220 pppIpxcpReceiveDiscardRequest 221 pppIpxcpReceiveUnknownCode 222 pppIpxcpIllegalAction 223 pppIpxcpSendConfigureRequest 224 pppIpxcpSendConfigureAck 225 pppIpxcpSendConfigureNak 226 pppIpxcpSendConfigureReject 227 pppIpxcpSendTerminateRequest 228 pppIpxcpSendTerminateAck 229 pppIpxcpSendCodeReject 230 pppIpxcpSendProtocolReject 231 pppIpxcpSendEchoReply 232 pppIpxcpInitialState 233 pppIpxcpStartingState 234 pppIpxcpClosedState 235 pppIpxcpStoppedState 236 pppIpxcpClosingState 237 pppIpxcpStoppingState 238 pppIpxcpReqSentState 239 pppIpxcpAckRcvdState 240 pppIpxcpAckSentState 241 pppIpxcpOpenedState 242 pppIpxcpCompressionProtocolRcvReq 243 pppIpxcpCompressionProtocolRcvNak 244 pppIpxcpCompressionProtocolRcvRej 245 pppIpxcpCompressionProtocolXmitReq 246 pppIpxcpNetworkNumberRcvReq 247 pppIpxcpNetworkNumberRcvNak 248 pppIpxcpNetworkNumberRcvRej 249 pppIpxcpNetworkNumberXmitReq 250 pppIpxcpNodeNumberRcvReq 251 pppIpxcpNodeNumberRcvNak 252 pppIpxcpNodeNumberRcvRej 253 pppIpxcpNodeNumberXmitReq 254 pppIpxcpRoutingProtocolRcvReq 255 pppIpxcpRoutingProtocolRcvNak 256 pppIpxcpRoutingProtocolRcvRej 257 pppIpxcpRoutingProtocolXmitReq 258 pppIpxcpRouterNameRcvReq 259 pppIpxcpRouterNameRcvNak 260 pppIpxcpRouterNameRcvRej 261 pppIpxcpRouterNameXmitReq 262 pppIpxcpConfigurationCompleteRcvReq 263 pppIpxcpConfigurationCompleteRcvNak 264 pppIpxcpConfigurationCompleteRcvRej 265 pppIpxcpConfigurationCompleteXmitReq 266 pppLcpThisLayerStart 267 pppLcpThisLayerFinished 268 pppLcpThisLayerUp 269 pppLcpThisLayerDown 270 pppLcpInitializeRestartCount 271 pppLcpZeroRestartCount 272 pppLcpRcvConfReqGood 273 pppLcpRcvConfReqBad 274 pppLcpReceiveConfigureAck 275 pppLcpReceiveConfigureNak 276 pppLcpReceiveConfigureReject 277 pppLcpReceiveTerminateRequest 278 pppLcpReceiveTerminateAck 279 pppLcpReceiveCodeRejectPermitted 280 pppLcpReceiveCodeRejectCatastrophic 281 pppLcpReceiveProtocolReject 282 pppLcpReceiveEchoRequest 283 pppLcpReceiveEchoReply 284 pppLcpReceiveDiscardRequest 285 pppLcpReceiveUnknownCode 286 pppLcpIllegalAction 287 pppLcpSendConfigureRequest 288 pppLcpSendConfigureAck 289 pppLcpSendConfigureNak 290 pppLcpSendConfigureReject 291 pppLcpSendTerminateRequest 292 pppLcpSendTerminateAck 293 pppLcpSendCodeReject 294 pppLcpSendProtocolReject 295 pppLcpSendEchoReply 296 pppLcpInitialState 297 pppLcpStartingState 298 pppLcpClosedState 299 pppLcpStoppedState 300 pppLcpClosingState 301 pppLcpStoppingState 302 pppLcpReqSentState 303 pppLcpAckRcvdState 304 pppLcpAckSentState 305 pppLcpOpenedState 306 pppLcpMruRcvReq 307 pppLcpMruRcvNak 308 pppLcpMruRcvRej 309 pppLcpMruXmitReq 310 pppLcpAsyncCharMapRcvReq 311 pppLcpAsyncCharMapRcvNak 312 pppLcpAsyncCharMapRcvRej 313 pppLcpAsyncCharMapXmitReq 314 pppLcpAuthenticationRcvReq 315 pppLcpAuthenticationRcvNak 316 pppLcpAuthenticationRcvRej 317 pppLcpAuthenticationXmitReq 318 pppLcpMagicNumberRcvReq 319 pppLcpMagicNumberRcvNak 320 pppLcpMagicNumberRcvRej 321 pppLcpMagicNumberXmitReq 322 pppLcpLinkQualityRcvReq 323 pppLcpLinkQualityRcvNak 324 pppLcpLinkQualityRcvRej 325 pppLcpLinkQualityXmitReq 326 pppLcpProtCompRcvReq 327 pppLcpProtCompRcvNak 328 pppLcpProtCompRcvRej 329 pppLcpProtCompXmitReq 330 pppLcpAddrCompRcvReq 331 pppLcpAddrCompRcvNak 332 pppLcpAddrCompRcvRej 333 pppLcpAddrCompXmitReq 334 pppLcpFcs32BitRcvReq 335 pppLcpFcs32BitRcvNak 336 pppLcpFcs32BitRcvRej 337 pppLcpFcs32BitXmitReq 338 pppLcpSelfDescPaddingRcvReq 339 pppLcpSelfDescPaddingRcvNak 340 pppLcpSelfDescPaddingRcvRej 341 pppLcpSelfDescPaddingXmitReq 342 pppLcpCompoundFramesRcvReq 343 pppLcpCompoundFramesRcvNak 344 pppLcpCompoundFramesRcvRej 345 pppLcpCompoundFramesXmitReq 346 pppLcpCallbackRcvReq 347 pppLcpCallbackRcvNak 348 pppLcpCallbackRcvRej 349 pppLcpCallbackXmitReq 350 pppLexThisLayerStart 351 pppLexThisLayerFinished 352 pppLexThisLayerUp 353 pppLexThisLayerDown 354 pppLexInitializeRestartCount 355 pppLexZeroRestartCount 356 pppLexRcvConfReqGood 357 pppLexRcvConfReqBad 358 pppLexReceiveConfigureAck 359 pppLexReceiveConfigureNak 360 pppLexReceiveConfigureReject 361 pppLexReceiveTerminateRequest 362 pppLexReceiveTerminateAck 363 pppLexReceiveCodeRejectPermitted 364 pppLexReceiveCodeRejectCatastrophic 365 pppLexReceiveProtocolRejectPermitted 366 pppLexReceiveEchoRequest 367 pppLexReceiveEchoReply 368 pppLexReceiveDiscardRequest 369 pppLexReceiveUnknownCode 370 pppLexIllegalAction 371 pppLexSendConfigureRequest 372 pppLexSendConfigureAck 373 pppLexSendConfigureNak 374 pppLexSendConfigureReject 375 pppLexSendTerminateRequest 376 pppLexSendTerminateAck 377 pppLexSendCodeReject 378 pppLexSendProtocolReject 379 pppLexSendEchoReply 380 pppLexInitialState 381 pppLexStartingState 382 pppLexClosedState 383 pppLexStoppedState 384 pppLexClosingState 385 pppLexStoppingState 386 pppLexReqSentState 387 pppLexAckRcvdState 388 pppLexAckSentState 389 pppLexOpenedState 390 pppLexMacTypeSelectRcvReq 391 pppLexMacTypeSelectRcvNak 392 pppLexMacTypeSelectRcvRej 393 pppLexMacTypeSelectXmitReq 394 pppLexTinygramCompressRcvReq 395 pppLexTinygramCompressRcvNak 396 pppLexTinygramCompressRcvRej 397 pppLexTinygramCompressXmitReq 398 pppLexMacAddressRcvReq 399 pppLexMacAddressRcvNak 400 pppLexMacAddressRcvRej 401 pppLexMacAddressXmitReq 402 pppLexMacRelayRcvReq 403 pppLexMacRelayRcvNak 404 pppLexMacRelayRcvRej 405 pppLexMacRelayXmitReq 406 pppLexStatisticsRequestRcvReq 407 pppLqrSent 408 pppLqrReceived 409 pppLinkDead 410 pppLinkEstablishment 411 pppLinkTermination 412 pppNetworkLayerPhase 413 pppPapAuthenticateReqReceived 414 pppPapAuthenticateAckReceived 415 pppPapAuthenticateNakReceived 416 pppPapAuthenticateReqSent 417 pppPapAuthenticateAckSent 418 pppPapAuthenticateNakSent 500 frGotLmiPacket 501 frGotBadQ922Header 502 frGotCllmPacket 503 frInactiveReceivedPacket 504 frReceivedNlpidIpPacket 505 frSentXidPacket 506 frSentXidResponse 507 frReceivedXidPacket 508 frXidTimerExpired 509 frGotBadUi 510 frGotBadSnapPacket 511 frLinkUp 512 frLinkDown 513 frLmiStarted 514 frLmiStopped 515 frLmiSentFullStatusEnquiry 516 frLmiSentKeepAliveMessage 517 frLmiStatusResponseReceived 518 frLmiGotAnsiReportType 519 frLmiGotFullStatusReport 520 frLmiGotKeepAliveMessage 521 frLmiUnsolicitedKeepAlive 522 frLmiAsynchronousStatus 523 frLmiGotQ933AReportType 524 frLmiBadPvcStatusLength 525 frLmiT391TimeoutFs 526 frLmiT391TimeoutSe 527 frLmiT391PollFailed 528 frLmiT391PollSucceeded 529 frLmiStatusEnquiryReceived 530 frDcpMode1Initializing 531 frDcpMode1Disabled 532 frDcpMode1ControlPacketReceived 533 frDcpMode1DataPacketReceived 534 frDcpMode1RequestSent 535 frDcpMode1RequestReceived 536 frDcpMode1ResponseSent 537 frDcpMode1ResponseReceived 538 frDcpMode1Operational 539 frDcpMode1TimerExpired 540 frDcpMode2ControlPacketReceived 541 frDcpResetPacketSent 542 frDcpResetTimerExpired 543 frDcpResetAckSent 544 frDcpDictionaryQuotaExceeded 1000 isdnRemoteConnectionUp 1001 isdnRemoteConnectionDown 1002 isdnActivateConnection 1003 isdnDeactivateConnection 1500 multilinkMpLinkUp 1501 multilinkMpAddBW 1502 multilinkMpRemoveBW 1503 multilinkMpSentBeginningFragment 1504 multilinkMpSentMiddleFragment 1505 multilinkMpSentEndFragment 1506 multilinkMpSentCompleteMessage 1507 multilinkMpReceivedBeginningFragment 1508 multilinkMpReceivedMiddleFragment 1509 multilinkMpReceivedEndFragment 1510 multilinkMpReceivedCompleteMessage	.1.3.6.1.4.1.52.4.1.2.7.2.7.2.1.5

Table containing objects used to configure DS1 alarm 
functionality on a per DS1 basis.

ds1AlarmConfigEntry row .1.3.6.1.4.1.52.4.1.2.7.2.8.2.1

A description of a single entry.

Indexes

ds1PhysNum

Column	Syntax	OID
ds1PhysNummandatory The value for this object is equal to the value of a unique physical connection identifier associated with this DS1 which is clearly labeled on the device. For those products that do not have a DS1 identifier labeled on…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.1
ds1AlarmAdminmandatory Used to enable and disable the DS1 Alarm Monitoring Application for this DS1 circuit.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.2
ds1AlarmAutoRecoverymandatory Used to enable and disable the DS1 Alarm Automatic Recovery feature for this DS1 circuit. For those devices that support ds1 alarm monitoring, but do not support the automatic recovery feature, this object always return…	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.3
ds1AlarmTrapEnablemandatory Used to enable and disable the DS1 Alarm SNMP Trap generation feature for this DS1 circuit. This object operates in conjunction with configuration of objects in the ctron-trap-mib.txt	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.4
ds1AlarmESCountmandatory Used in conjuction with ctDs1AlarmESInterval to set the threshold for alarm generation when the number of Errored Seconds for a specified time interval, measured in minutes, is exceeded. The default Errored Seconds …	Integer32r/w Constraints: range: 1-300	.1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.5
ds1AlarmESIntervalmandatory Used in conjuction with ctDs1AlarmESCount to set the threshold for alarm generation when the number of Errored Seconds for a specified time interval, measured in minutes, is exceeded. The default Errored Seconds al…	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.6
ds1AlarmBPVErrorRatemandatory Used to specify the negative exponent of 10, used in monitoring Bipolar Violations (Code Violations for E1) over intervals defined by ds1AlarmBPVInterval. For example, for a ds1AlarmBPVErrorRate value of 6 used with …	Integer32r/w Constraints: range: 5-9	.1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.7
ds1AlarmBPVIntervalmandatory Used to specify the interval, used in monitoring Bipolar Violations (Code Violations for E1) with thresholds defined by ds1AlarmBPVErrorRate. For example, for a ds1AlarmBPVErrorRate value of 6 used with a ds1AlarmBPV…	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.8
ds1AlarmManualRecoverymandatory To cause a manual recovery to occur, this object is set to a 1. It is always read as a 1. The recovery will occur only when automatic recovery is disabled.	Enumerationr/w Enumerated Values: 1 recover	.1.3.6.1.4.1.52.4.1.2.7.2.8.2.1.9

Table containing IP addresses, used in an
IP Priority Queue Forwarding function.

ipPQAddressEntry row .1.3.6.1.4.1.52.4.1.2.7.2.9.2.1

A description of a single entry.

Indexes

ipPQAddressId

Column	Syntax	OID
ipPQAddressIdmandatory A unique value identifying an element in a sequence of IP PQ address entries.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.52.4.1.2.7.2.9.2.1.1
ipPQIPAddressmandatory Returns an IP address associated with a specific entry in this table.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.1.2.7.2.9.2.1.2

This table is an extension to the standard ds3 configuration
table. It is a list of items that are pertinant to ds3 ports
on a platform. There is one entry per ds3 physical port on
the platform.

ctDs3ExtensionsEntry row .1.3.6.1.4.1.52.4.1.2.7.2.10.1.1

A ds3 extensions entry containing objects relating to
the particular ds3 physical port.

Indexes

ctDs3ExtensionsEntryIndex

Column	Syntax	OID
ctDs3ExtensionsEntryIndexmandatory A unique value for each ds3 physical port on the platform.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.1
ctDs3ExtensionsNumInterfacesmandatory The number of interfaces on this physical port. This number inidicates the number of entries this physical port uses in the ifTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.2
ctDs3ExtensionsLineBuildOutmandatory The line build out setting for this ds3 physical port. Unknown indicates that the setting is neither readable or writable.	Enumerationr/w Enumerated Values: 1 unknown 2 zeroto255feet 3 a255to450feet	.1.3.6.1.4.1.52.4.1.2.7.2.10.1.1.3