CTATX-MIB Table View

A list of the most recent occupants of the slots; one
per slot.

hwEntry row .1.3.6.1.4.1.97.3.1.2.1

A set of objects for each slot.

Indexes

hwIndex

Column	Syntax	OID
hwIndexmandatory The slot number, beginning with 1 for the top-most slot. This number always matches the instance of the hwEntry. For example, {hwIndex 3} contains the value '3'.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.1.2.1.1
hwTypemandatory The module type of the slot's most recent occupant since the ES/1 was started. The values for hwType correspond to the values for hwPortType.	Enumeration Enumerated Values: 1 vacant 2 unknown 3 packet-processing-engine 4 turbo 5 csma-iom 6 hssi-iom 7 tpr-iom 8 fddi-iom 9 ifddi-iom 10 ttpr-iom 11 eiom8-iom 12 feiom-iom	.1.3.6.1.4.1.97.3.1.2.1.2
hwUseModmandatory Whether to use this module, not applicable for the Packet Processing Engine. The value of hwUseMod is not saved if the ES/1 reboots. If the module fails diagnostics, it will not be used, regardless of hwUseMod.	Enumerationr/w Enumerated Values: 1 reset 2 run-diagnostics 3 run	.1.3.6.1.4.1.97.3.1.2.1.3
hwDefTypemandatory The module type defined for the slot. Certain pre-defined relationships exist. Slot 1 always contains the Packet Processing Engine board. Slots 2-6 are either unoccupied, or contain IOM boards. Slot 7 is either unoccupi…	Enumeration Enumerated Values: 1 vacant 2 unknown 3 packet-processing-engine 4 turbo 5 csma-iom 6 hssi-iom 7 tpr-iom 8 fddi-iom 9 ifddi-iom 10 ttpr-iom 11 eiom8-iom 12 feiom-iom	.1.3.6.1.4.1.97.3.1.2.1.4
hwDiagStatusmandatory Results of diagnostics, when diagnostics were last performed on the module (whenever a module is released from reset, which is usually at power-up).	Enumeration Enumerated Values: 1 diag-failed 2 diag-not-present 3 diag-passed	.1.3.6.1.4.1.97.3.1.2.1.5
hwInusemandatory Whether the module is currently executing its operational software.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.1.2.1.6
hwDiagCodemandatory Additional diagnostics information concerning the slot's module. The meaning of hwDiagCode depends upon the slot's module type described by the hwType parameter. For the Packet Processing Engine board, any error (except…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.1.2.1.7
hwManufDatamandatory This is a 24 byte array which contains the part number, serial number and hardware revision level of this module. The Turbo's hwManufData will be all blanks since it is manufactured as part of the Packet Processing Engi…	OctetString	.1.3.6.1.4.1.97.3.1.2.1.8
hwPortTypemandatory This is a variable-length byte array, where each element represents the port types belonging to this module. The Packet Processing Engine's ports are fixed as 'uart' for the first port, and 'none' for any other ports. T…	OctetString	.1.3.6.1.4.1.97.3.1.2.1.9
hwPortStatusmandatory This is a variable-length byte array, where each element represents the status of the port belonging to this module. Values of 01 (status-good) or hex ff (status-bad) are supported. For the Packet Processing Engine, the…	OctetString	.1.3.6.1.4.1.97.3.1.2.1.10
hwUsePortmandatory	OctetStringr/w	.1.3.6.1.4.1.97.3.1.2.1.11
hwDefPortTypemandatory This is a variable-length byte array, where each element represents the port types defined for the module. If hwDefPortType does not match hwPortType, then the port will not be used. Note that hwDefPortType can only be…	OctetString	.1.3.6.1.4.1.97.3.1.2.1.12
hwAddr1mandatory The unique hard-wired 48 bit MAC address for the module's 1st port. For the Packet Processing Engine, it's a unique MAC address to be used as part of the ES/1's Spanning Tree Bridge Identifier. For the Turbo, not applic…	OctetString	.1.3.6.1.4.1.97.3.1.2.1.13
hwAddr2mandatory The unique hard-wired 48 bit MAC address for the module's 2nd port, only applicable for IOMs.	OctetString	.1.3.6.1.4.1.97.3.1.2.1.14
hwAddr3mandatory The unique hard-wired 48 bit MAC address for the module's 3rd port, only applicable for IOMs.	OctetString	.1.3.6.1.4.1.97.3.1.2.1.15
hwAddr4mandatory The unique hard-wired 48 bit MAC address for the module's 4th port, only applicable for IOMs.	OctetString	.1.3.6.1.4.1.97.3.1.2.1.16
hwTempOKmandatory The temperature condition of the module, where True indicates temperature okay, and False indicates temperature too hot.	Enumeration Enumerated Values: 1 temperature-normal 2 temperature-too-hot	.1.3.6.1.4.1.97.3.1.2.1.17
hwFirstPortmandatory The ifIndex number of the first port which resides within this module. [Not applicable for the Turbo.]	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.1.2.1.18
hwFatalErrmandatory This is a 32 byte array which contains information about the cause of the module's last unexpected self-reset, since the ES/1 booted.For the Packet Processing Engine and Turbo, this will always be all zeroes, since fail…	OctetString	.1.3.6.1.4.1.97.3.1.2.1.19
hwRptrPortsmandatory This is a variable-length byte array, where each element represents the repeater capability of the port belonging to this module. The element value is zero if the port is not present or does not have any repeater capabi…	OctetString	.1.3.6.1.4.1.97.3.1.2.1.20
hwPortSubTypemandatory This is a variable-length byte array, where each element represents additional port type information.	OctetString	.1.3.6.1.4.1.97.3.1.2.1.21
hwAddr5mandatory	OctetString	.1.3.6.1.4.1.97.3.1.2.1.22
hwAddr6mandatory	OctetString	.1.3.6.1.4.1.97.3.1.2.1.23
hwAddr7mandatory	OctetString	.1.3.6.1.4.1.97.3.1.2.1.24
hwAddr8mandatory	OctetString	.1.3.6.1.4.1.97.3.1.2.1.25

A list of the software file sets stored in the ES/1. The
first file set refers to the file set that was used when
the ES/1 last booted. The second file set refers to the
file set that will be used when the ES/1 reboots or
reloads any hardware module.

swFileset row .1.3.6.1.4.1.97.3.2.2.1

A set of objects for each file set.

Indexes

swIndex

Column	Syntax	OID
swIndexmandatory The file set number, beginning with 1 for the first file set. This number always matches the instance of the swFiles. For example, {swIndex 2} contains the value '2'.	Enumeration Enumerated Values: 1 currently-executing 2 next-boot	.1.3.6.1.4.1.97.3.2.2.1.1
swDescmandatory The description (0-255 bytes) of the software file set.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.97.3.2.2.1.3
swCountmandatory The number of files in the file set. This number may range from 1 to 255.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.2.2.1.4
swTypesmandatory The types of the files within the file set.The size of swFileTypes may be determined by swCount. The possible file types are none (0) File not present ppe-turbo (1) Packet Processing Engine and/or Turbo Code ppe-only(2…	OctetString	.1.3.6.1.4.1.97.3.2.2.1.5
swSizesmandatory An array (4 octets per file), containing the size of each of the files. Each size is encoded as a series of 4 bytes, which should be converted into a 32 bit integer.	OctetString	.1.3.6.1.4.1.97.3.2.2.1.6
swStartsmandatory An array (4 octets per file), containing the software's execution starting address of each of the files. Each address is encoded as a series of 4 bytes, which should be converted into a 32 bit integer.	OctetString	.1.3.6.1.4.1.97.3.2.2.1.7
swBasesmandatory An array (4 octets per file), containing the software's base loading address of each of the files. Each address is encoded as a series of 4 bytes, which should be converted into a 32 bit integer.	OctetString	.1.3.6.1.4.1.97.3.2.2.1.8
swFlashBankmandatory The bank number where the software file set resides.	Enumeration Enumerated Values: 1 first-bank 2 second-bank	.1.3.6.1.4.1.97.3.2.2.1.9

A list of snmpsmt entries, one per FDDI board.

fddismtEntry row .1.3.6.1.4.1.97.3.6.5.1

A set of objects for an interface entry.

Indexes

fddismtIndex

Column	Syntax	OID
fddismtIndexmandatory A unique value for each SMT. It represents the sequence number of the FDDI board in ES/1.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.6.5.1.1
fddismtUpstreamReqmandatory When this variable is written, the ES/1 converts it into a big-endian FDDI address and issues an SMT NIF request to determine that address's upstream neighbor. When the NIF response is received, snmpsmtUpstreamRsp will …	OctetStringr/w	.1.3.6.1.4.1.97.3.6.5.1.2
fddismtUpstreamRspmandatory The address of the upstream neighbor of the ES/1 whose address was written into snmpsmtUpstreamReq. If the address has not yet been learned, then an address of all zeroes is returned.	OctetString	.1.3.6.1.4.1.97.3.6.5.1.3
fddismtUpstreamDescriptormandatory A four byte string containing the upstream neighbor's Station Descriptor parameter, as defined by the SMT frame protocols. If the upstream neighbor has not yet been learned, then a string of all zeroes is returned.	OctetString	.1.3.6.1.4.1.97.3.6.5.1.4
fddismtUpstreamStatemandatory A four byte string containing the upstream neighbor's Station State parameter, as defined by the SMT frame protocols. If the upstream neighbor has not yet been learned, then a string of all zeroes is returned.	OctetString	.1.3.6.1.4.1.97.3.6.5.1.5

A list of interface entries; one per port.

sifEntry row .1.3.6.1.4.1.97.3.7.2.1

A set of objects for an interface entry.

Indexes

sifIndex

Column	Syntax	OID
sifIndexmandatory The port number, beginning with 1 for the first port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.1
sifSmlRxCntmandatory The number of small data buffers for receiving packets.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.2
sifLrgRxCntmandatory The number of large data buffers for receiving packets; must be zero for CSMA and UART ports.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.3
sifUxTxCntmandatory The maximum size of the port's transmit queue, i.e., the number of packets that can be in the port's transmit queue, waiting to be transmitted.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.4
sifThresholdmandatory Maximum number of combined receive and transmit packet hardware errors before an alarm should be generated.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.5
sifThresholdTimemandatory The time period (in seconds) to which sifThreshold applies. A value of zero will disable the sifThreshold alarm.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.6
sifRxQueueThreshmandatory Maximum number of receive packet queue overflow errors before an alarm should be generated.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.7
sifRxQueueThreshTimemandatory The time period (in seconds) to which sifRxQueueThresh applies. A value of zero will disable the sifRxQueueThresh alarm.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.8
sifTxStormCntmandatory The maximum number of multicasts to transmit with a certain period of time (not applicable for UART ports).	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.9
sifTxStormTimemandatory The period of time, in centiseconds, which qualifies sifTxStormCnt (not applicable for UART ports).	RFC1155-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.10
sifFilterFlagsmandatory Special filter flags; any combination of the following bits: 0x0001 NO_SOURCE_SAME, 0x0002 NO_SOURCE_LEARNT, 0x0004 NO_LEARNING, 0x0008 NO_DEST_LEARNT	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.11
sifCongestTimemandatory When a port becomes congested, the PPE will discard any packets destined to the port for this many centiseconds following the congestion alarm. Possible values 0 through 5 minutes, except for port 1 (the out-of-band man…	RFC1155-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.12
sifQueueTimemandatory The time, in centiseconds, after which an element in a transmit queue will be flushed.	RFC1155-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.13
sifPortCostmandatory	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.14
sifStPrioritymandatory	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.15
sifFunctionsmandatory The current functional state (protocols which have been activated and are operational) of the port. The following values or combinations are supported: 0x0001 NMS, 0x0002 TBRIDGE, 0x0004 SBRIDGE, 0x0006 SR…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.16
sifCongestedmandatory Whether the port is out-bound congested.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.7.2.1.17
sifStatemandatory	Enumeration Enumerated Values: 1 spanning-tree-disabled 2 spanning-tree-listening 3 spanning-tree-learning 4 spanning-tree-forwarding 5 spanning-tree-blocking	.1.3.6.1.4.1.97.3.7.2.1.18
sifDesigCostmandatory	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.19
sifDesigRootmandatory	OctetString	.1.3.6.1.4.1.97.3.7.2.1.20
sifDesigBridgemandatory	OctetString	.1.3.6.1.4.1.97.3.7.2.1.21
sifDesigPortmandatory	OctetString	.1.3.6.1.4.1.97.3.7.2.1.22
sifRxPacketsmandatory A 100 byte array, containing the number of received packets broken down into 25 categories. The number of packets in each category is encoded as a series of 4 bytes, which should be converted into a 32 bit counter. The …	OctetString	.1.3.6.1.4.1.97.3.7.2.1.23
sifRxChar0smandatory Number of characters in the forwarded received packets.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.24
sifRxChar1smandatory Number of characters in the filtered received packets.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.25
sifRxSizeErrorsmandatory Number of received packets discarded due to size errors.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.26
sifRxHwFCSsmandatory Number of received packets discarded due to FCS errors.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.27
sifRxQueuesmandatory Number of received packets lost because of insufficient receive buffers.(For certain interfaces with multi-packet FIFO hardware, this count might be approximate.)	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.28
sifTxPacketsmandatory A 20 byte array, containing the number of transmitted packets broken down into 5 categories. The number of packets in each category is encoded as a series of 4 bytes, which should be converted into a 32 bit counter.	OctetString	.1.3.6.1.4.1.97.3.7.2.1.30
sifTxCongestsobsolete	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.31
sifTxStormsmandatory Number of packets not sent due to protection against a multicast storm.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.32
sifTxDestsmandatory Number of packets not sent due to a destination port filtering restriction.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.33
sifErrorsFlagmandatory Whether the port has exceeded the limits specified by sifThreshold and sifThresholdTime.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.7.2.1.34
sifTxStormFlagmandatory Whether PPE has invoked multicast storm protection.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.7.2.1.35
sifTxSizesmandatory Number of packets not sent due to size limitations.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.36
sifTxAddrmandatory A series of 16 MAC addresses (96 octets in total), of the source addresses of the last 16 packets that were not sent due to packet size limitations. If fewer than 16 packets were not sent, then the unspecified MAC addre…	OctetString	.1.3.6.1.4.1.97.3.7.2.1.37
sifLanmandatory Up to four group identifiers assigned to the port. The sifLan identifier is only used by combination filter testing, i.e., for comparisons against filterSrcLan. Possible values are 0 through 255, for each of the paramet…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.38
sifStatisticsTimemandatory Length of time during which statistics were collected. In particular, the following statistics may be examined to determine the exact utilization rate of a port: ifInOctets, ifInUcastPkts, ifInNUcastPkts ifOutOctets, …	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.39
sifIpAddressmandatory The IP address assigned to the port. If this is zero, then the port must learn its IP address via Reverse ARP or PPP's IPCP.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.97.3.7.2.1.40
sifIpGroupAddressmandatory Zero, or an IP Group address assigned to the port.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.97.3.7.2.1.41
sifMaxPacketSizemandatory The maximum packet size, in bytes (octets), which may be transmitted through this port. This parameter may not be changed, except for PPP ports, in which case, changing sifMaxPacketSize automatically causes ifMtu and pp…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.42
sifExpectSqemandatory Whether the port should expect SQE, also known as heartbeat (not applicable for ports other than CSMA/CD ports).	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.7.2.1.43
sifFilterLocalmandatory Whether the port should attempt to filter local traffic, bypassing all statistics accumulation, rather than passing the local traffic to the Packet Processing Engine. Filtering local traffic is not available for UART an…	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.7.2.1.44
sifInQLenmandatory The maximum length ever obtained by the port's inbound packet queue (in packets). The size of a port's inbound packet queue is periodically polled (rather than recalculated whenever a packet is added), so sifInQLen is a…	RFC1155-SMIGauger/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.45
sifFrameSwitchingmandatory Valid only for Token Ring ports. Options include: enabled (1), disabled (2).Defaults to disabled(2). If enabled, frames may be bridged between token ring ports on the same board at higher throughput and lower latency th…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.7.2.1.46
sifRingDropsmandatory Only valid for 802.5 token ring. Number of times the ring left the open state.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.47
sifAdapterChecksmandatory Only valid for 802.5 token ring. Number of times the MAC chip experienced an internal hardware failure and had to be reset.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.2.1.48
sifIpRipPortMetricmandatory Port metric for backup RIP interface.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.2.1.49
sifDescrmandatory A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.	OctetStringr/w	.1.3.6.1.4.1.97.3.7.2.1.50

A list of interface utilization entries; one per sifUtilCount per
physical port, plus one per physical port for the most recently
completed samples.

sifUtilPortPeakEntry row .1.3.6.1.4.1.97.3.7.6.1

A set of utilization statistics recorded for an interface entry at
per-port throughput peaks.

Indexes

sifUtilPortPeakIndex sifUtilPortPeakOrdinal

Column	Syntax	OID
sifUtilPortPeakIndexmandatory The port number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.6.1.1
sifUtilPortPeakOrdinalmandatory The ordinal of the entry, with 1 representing 'Now' (i.e. the sample most recently accumulated), with 2 representing the sample taken at the highest per-port throughput peak, 3 at the next highest, and so on.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.6.1.2
sifUtilPortPeakBRTimestampmandatory The value of sysUpTime associated with the end of the sample period for the associated sifUtilPortPeakTBitRate/sifUtilPortPeakRBitRate sample, or the most recent timestamp for the sample currently being accumulated. Thi…	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.6.1.3
sifUtilPortPeakTBitRatemandatory The ratio of the number of bits transmitted per second during the per-physical-port sample interval to the linespeed in bits per second, expressed in integer units of 1/100, maximum 99. This will be 0 for any ports for…	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.97.3.7.6.1.4
sifUtilPortPeakRBitRatemandatory The ratio of the number of bits received per second during the per-physical-port sample interval to the linespeed in bits per second, expressed in integer units of 1/100, maximum 99, and excluding some or all locally-fi…	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.97.3.7.6.1.5

A list of interface utilization entries; one per sifUtilCount per
physical port, plus one per physical port for the most recently
completed samples.

sifUtilSysPeakEntry row .1.3.6.1.4.1.97.3.7.8.1

A set of utilization statistics recorded for an interface entry at
overall system throughput peaks.

Indexes

sifUtilSysPeakIndex sifUtilSysPeakOrdinal

Column	Syntax	OID
sifUtilSysPeakIndexmandatory The port number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.8.1.1
sifUtilSysPeakOrdinalmandatory The ordinal of the entry, with 1 representing 'Now' (i.e. the sample most recently accumulated), with 2 representing the sample taken at the highest peak system throughput, 3 at the next highest, and so on.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.7.8.1.2
sifUtilSysPeakTimestampmandatory The value of sysUpTime associated with the end of the sample period for the associated sifUtilSysPeakTBitRate/sifUtilSysPeakRBitRate sample, or the most recent timestamp for the sample currently being accumulated. This …	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.7.8.1.3
sifUtilSysPeakTBitRatemandatory The ratio of the number of bits transmitted per second during the per-system-peak sample interval to the linespeed in bits per second, expressed in integer units of 1/100, maximum 99. This will be 0 for any ports for w…	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.97.3.7.8.1.4
sifUtilSysPeakRBitRatemandatory The ratio of the number of bits received per second during the per-system-peak sample interval to the linespeed in bits per second, expressed in integer units of 1/100, maximum 99, and excluding some or all locally-filt…	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.97.3.7.8.1.5

A list of interface entries; one per FDDI port.

sfddiEntry row .1.3.6.1.4.1.97.3.8.1.1

A set of objects for an interface entry.

Indexes

sfddiIndex

Column	Syntax	OID
sfddiIndexmandatory The ES/1's port number of the port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.8.1.1.1
sfddiRxHwAbortsmandatory The number of packets that were discarded due to receive abort errors.	RFC1155-SMICounterr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.8.1.1.2
sfddiRxParitysmandatory The number of packets that were discarded due to parity errors.	RFC1155-SMICounterr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.8.1.1.3
sfddiRxShortsmandatory The number of packets that were discarded because they were too short.	RFC1155-SMICounterr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.8.1.1.4
sfddiDpcErrCntsmandatory The number of DPC errors.	RFC1155-SMICounterr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.8.1.1.5
sfddiDpcErrValuemandatory Detailed status of the last DPC error.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.8.1.1.6
sfddiRbcErrCntsmandatory The number of RBC errors.	RFC1155-SMICounterr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.8.1.1.7
sfddiRbcErrValuemandatory Detailed status of the last RBC error. (FIOM MIB only)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.8.1.1.8
sfddiTxAsyncmandatory Number of bytes to reserve in the DPC Buffer Memory for transmitting asynchronous packets.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.8.1.1.9
sfddiShortAddressingmandatory Whether any packets were received with 16 bit MAC addresses.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.8.1.1.10
sfddiSmtConditionsmandatory SMT conditions which should be reported to the NMS via SNMP Traps. Possible values are any combination of the following bits: ring = 0x00000001, claim = 0x00000002, beacon = 0x00000004, tvx = 0x00000008, trt = 0x0000001…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.8.1.1.11
sfddiSrfConditionsmandatory SRF conditions which should be reported to the NMS via SNMP Traps. Possible values are any combination of the following bits: srf-frame-error = 0x00000001, srf-port-ler = 0x00000002, srf-not-copied = 0x00000004,srf-dup…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.8.1.1.12
sfddiSmtConditionsStatusmandatory Requested SMT conditions which are currently present. Writing to sfddiSmtConditionsStatus is used to acknowledge the SNMP traps.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.8.1.1.13
sfddiSrfConditionsStatusmandatory Requested SRF conditions which are currently present. Writing to sfddiSrfConditionsStatus is used to acknowledge the SNMP traps.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.8.1.1.14
sfddiSrfReportLimitmandatory	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.8.1.1.15
sfddiFrameErrorThresholdmandatory	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.8.1.1.16
sfddiNotCopiedThresholdmandatory Value for the fddiMACNotCopiedThreshold variable.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.8.1.1.17
sfddiSBFlagmandatory Whether the ECM's optical bypass is stuck, i.e., the current value of the SMT SB_Flag variable.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.8.1.1.18
sfddiRxEbitsmandatory The number of packets that were discarded because another station had already set the E bit.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.8.1.1.19
sfddiOBSFuseBadmandatory Whether the fuse to the FDDI port's optical bypass is bad.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.8.1.1.20
sfddiThruBmandatory Whether to connect to the FDDI port B (not applicable for SAS).	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.8.1.1.21
sfddiStationDescriptormandatory A four byte string containing the FDDI port's Station Descriptor parameter, as defined by the SMT frame protocols.	OctetString	.1.3.6.1.4.1.97.3.8.1.1.22
sfddiStationStatemandatory A four byte string containing the FDDI port's Station State parameter, as defined by the SMT frame protocols.	OctetString	.1.3.6.1.4.1.97.3.8.1.1.23
sfddiDownstreamNbrmandatory The MAC address of the FDDI port's downstream neighbor.	OctetString	.1.3.6.1.4.1.97.3.8.1.1.24
sfddiSMTBufferSizemandatory The amount of packet buffer space to reserve for processing SMT frames. Possible values 9000 - 18000. (FIOM MIB only)	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.8.1.1.25

A list of interface entries; one per UART port.

suartEntry row .1.3.6.1.4.1.97.3.9.1.1

A set of objects for an interface entry.

Indexes

suartIndex

Column	Syntax	OID
suartIndexmandatory The ES/1's port number of the port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.9.1.1.1
suartBaudmandatory This is the desired baud rate. Only 1200 baud through 19,200 baud are supported by the ES/1.	Enumerationr/w Enumerated Values: 1 external-clock 2 b1200-baud 3 b2400-baud 4 b4800-baud 5 b9600-baud 6 b19200-baud 7 b38400-baud 8 b56-kilobits 9 b1544-kilobits 10 b2048-kilobits 11 b45-megabits	.1.3.6.1.4.1.97.3.9.1.1.2
suartModemmandatory The expected modem signals; definitions of the different values are TBD.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.9.1.1.3
suartIpNeighborAddressmandatory	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.97.3.9.1.1.4
suartPPPActivemandatory	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.9.1.1.5
suartAlignmentErrorsmandatory Number of received packets with frame alignment errors, since the port was last enabled.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.9.1.1.6
suartOverrunErrorsmandatory Number of received packets with data overrun errors, since the port was last enabled.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.9.1.1.7

A list of combination filters; one per defined filter. If
fewer than filterMaxCount filters have been defined, then an
additional filterEntry exists, which is used as part of the
sequence for defining a new filter.

filterEntry row .1.3.6.1.4.1.97.3.10.7.1

A set of objects for a combination filter.

Indexes

filterIndex

Column	Syntax	OID
filterIndexmandatory This number always matches the instance of the filterEntry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.10.7.1.1
filterIDmandatory Identifier assigned to the filter, used for obtaining the value for filterDeleteID so that the filter can be deleted.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.10.7.1.2
filterPortNomandatory The port number related to this filter.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.10.7.1.3
filterComboTypemandatory Whether this is an entry filter (0), an exit filter(1), a port mirror entry filter (3), or a port mirror exit filter (4).	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.10.7.1.4
filterFlagsmandatory A set of flag bits which control the operation of the filter. Filters will not prevent packets from being accepted by the ES/1 as a final destination. The following bits are used: bit 13, bit 12, bit 11, bit 10. bits…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.10.7.1.5
filterFramemandatory Ethernet protocol type (1501-65535), or one (1) to indicate any 802 frame, or two (2) to indicate any Ethernet frame, Note that a specific Ethernet protocol type may appear in either Ethernet format frames, or encapsula…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.10.7.1.6
filterSourcemandatory Beginning source address.	OctetStringr/w	.1.3.6.1.4.1.97.3.10.7.1.7
filterSourceEndmandatory Ending source address.	OctetStringr/w	.1.3.6.1.4.1.97.3.10.7.1.8
filterDestmandatory Beginning destination address.	OctetStringr/w	.1.3.6.1.4.1.97.3.10.7.1.9
filterDestEndmandatory Ending destination address.	OctetStringr/w	.1.3.6.1.4.1.97.3.10.7.1.10
filterSourceMaskmandatory A bitmask to be applied to the packet's source address before checking it against filterSource and filterSourceEnd.	OctetStringr/w	.1.3.6.1.4.1.97.3.10.7.1.11
filterDestMaskmandatory A bitmask to be applied to the packet's destination address before checking it against filterDest and filterDestEnd.	OctetStringr/w	.1.3.6.1.4.1.97.3.10.7.1.12
filterSrcLanmandatory Either the port number from which the packet is received, or the value of any one of the group identifiers defined by sifLan for that port.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.10.7.1.13
filterOffsetmandatory Zero-based offset of an arbitrary field within the packet. Depending upon the value of filterFlags, the offset is relative to the start of the translated packet, beginning with the big endian MAC addresses; or, the offs…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.10.7.1.14
filterFieldmandatory An 8 octet value to be compared to the contents of the arbitrary field within the packet.	OctetStringr/w	.1.3.6.1.4.1.97.3.10.7.1.15
filterMaskmandatory An 8 octet mask to be applied to the arbitrary field within the packet, before comparing it to filterField.	OctetStringr/w	.1.3.6.1.4.1.97.3.10.7.1.16
filterThresholdmandatory The number of filter invocations at which an alarm to the NMS should be generated.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.10.7.1.17
filterThreshTimemandatory The length of time, in seconds, to which filterThreshold applies. A value of zero indicates that no alarms should be sent to the NMS. Values greater than 3600 (i.e., one hour) are not allowed.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.10.7.1.18
filterThreshFlagmandatory Whether usage of this filter has exceeded the limits specified by filterThreshold and filterThreshTime, and the NMS has not yet acknowledged the alarm. Therefore, whenever the NMS reads this value, it will always be Fal…	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.10.7.1.19
filterPktCntsmandatory The total number of packets which were discarded due to this filter.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.10.7.1.20
filterLastSrcmandatory The source MAC address of the last packet which was discarded due to this filter	OctetString	.1.3.6.1.4.1.97.3.10.7.1.21

A list of the desired occupants of the slots; one per slot.

rebootEntry row .1.3.6.1.4.1.97.3.11.2.1

A set of objects for each slot.

Indexes

rebootIndex

Column	Syntax	OID
rebootIndexmandatory The slot number, beginning with 1 for the first slot. This number always matches the instance of the rebootEntry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.11.2.1.1
rebootTypemandatory The desired module type of the slot.	Enumerationr/w Enumerated Values: 1 vacant 2 unknown 3 packet-processing-engine 4 turbo 5 csma-iom 6 hssi-iom 7 tpr-iom 8 fddi-iom 9 ifddi-iom 10 ttpr-iom 11 eiom8-iom 12 feiom-iom	.1.3.6.1.4.1.97.3.11.2.1.2
rebootUseModmandatory Whether to use this module, not applicable for the Packet Processing Engine.	Enumerationr/w Enumerated Values: 1 reset 3 run	.1.3.6.1.4.1.97.3.11.2.1.3
rebootPortTypemandatory This is a variable-length byte array where each element represents the types of the ports belonging to this module.	OctetStringr/w	.1.3.6.1.4.1.97.3.11.2.1.4

A list of the modules which may be debugged, with one module
per slot defined by hwSlotTable.

debugEntry row .1.3.6.1.4.1.97.3.12.3.1

A set of objects for each module.

Indexes

debugIndex

Column	Syntax	OID
debugIndexmandatory The module number, beginning with 1 for the module in the first slot. This number always matches the instance of the debugEntry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.12.3.1.1
debugOperationmandatory Type of debug operation requested.	Enumerationr/w Enumerated Values: 1 examine 2 modify	.1.3.6.1.4.1.97.3.12.3.1.2
debugBasemandatory The base address of the memory region to be examined or modified.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.12.3.1.3
debugLengthmandatory The desired length, in words, of the memory region to be examined or modified. After the ES/1 performs the operation, debugLength is updated to indicate the length of memory that was actually examined or modified. If de…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.12.3.1.4
debugDatamandatory A series of 0-64 octets, which represents 0-16 words (this may change in the future, if the ES/1 has processors with word sizes of other than 4 bytes per word). When this variable is read, the LMA will use the values in…	OctetStringr/w	.1.3.6.1.4.1.97.3.12.3.1.5

A list of interface entries; one per port.

lpbkEntry row .1.3.6.1.4.1.97.3.13.1.1

A set of objects for an interface entry.

Indexes

lpbkIndex

Column	Syntax	OID
lpbkIndexmandatory The port number, beginning with 1 for the first port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.13.1.1.1
lpbkOperationmandatory The type of loopback being performed. Setting lpbkOperation to loopback-off causes loop back operation to terminate. Setting lpbkOperation to loopback-local or loopback-remote causes loopback operation to commence, and …	Enumerationr/w Enumerated Values: 1 loopback-off 2 loopback-local 3 loopback-remote	.1.3.6.1.4.1.97.3.13.1.1.2
lpbkDestAddrmandatory The MAC address of the target device, only needed for remote loopback.	OctetStringr/w	.1.3.6.1.4.1.97.3.13.1.1.3
lpbkPktNummandatory The number of loopback packets to be transmitted.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.13.1.1.4
lpbkIntervalmandatory The desired time delay between the reception of a looped back packet, and the transmission of the next packet to be looped back.	RFC1155-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.13.1.1.5
lpbkPktLengthmandatory The length (in octets) of the loopback packet. The values of the data itself are automatically selected by the ES/1.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.13.1.1.6
lpbkIncrementsmandatory The number of bytes of data to be added to the loopback packet after each successful loopback packet transmission and reception. When the port's maximum packet size has been reached, the ES/1 automatically begins again,…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.13.1.1.7
lpbkGoodsmandatory The number of packets successfully looped back. This number is automatically reset to zero, whenever loopback operation is initiated.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.13.1.1.8
lpbkErrorNoReceivesmandatory The number of packets which were transmitted, but not received. This number is automatically reset to zero, whenever loopback operation is initiated.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.13.1.1.9
lpbkErrorBadReceivesmandatory The number of transmitted packets which were received with different data patterns. This number is automatically reset to zero, whenever loopback operation is initiated.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.13.1.1.10
lpbkErrorSizemandatory The length of the last loopback packet which caused either lpbkErrorNoReceives or lpbkErrorBadReceives to be incremented. This number is automatically reset to zero, whenever loopback operation is initiated.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.13.1.1.11
lpbkErrorSentmandatory The transmitted bytes (0-4) of data within the last loopback packet which caused lpbkErrorBadReceives to be incremented. This parameter is automatically reset to the null string, whenever loopback operation is initiated.	OctetString	.1.3.6.1.4.1.97.3.13.1.1.12
lpbkErrorReceivedmandatory The received bytes (0-4) of data within the last loopback packet which caused lpbkErrorBadReceives to be incremented. This parameter is automatically reset to the null string, whenever loopback operation is initiated.	OctetString	.1.3.6.1.4.1.97.3.13.1.1.13
lpbkErrorOffsetmandatory The byte offset (one being the first byte) within the loopback packet where lpbkErrorSent begins. This number is automatically reset to zero, whenever loopback operation is initiated.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.13.1.1.14

A list of interface entries; one per WAN port.

swanEntry row .1.3.6.1.4.1.97.3.14.1.1

A set of objects for an interface entry.

Indexes

swanIndex

Column	Syntax	OID
swanIndexmandatory The ES/1's port number of the port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.14.1.1.1
swanDesiredSpeedmandatory	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.14.1.1.2
swanActualSpeedmandatory This is the actual line speed. The possible values are defined by suartSpeed. For HSSI, the speed is 45-megabits(11). If the RS-449 interface is being used on the HSSI IOM, the speed is always reported as 1.544-megabits…	Enumeration Enumerated Values: 2 b1200-baud 3 b2400-baud 4 b4800-baud 5 b9600-baud 6 b19200-baud 7 b38400-baud 8 b56-kilobits 9 b1544-kilobits 10 b2048-kilobits 11 b45-megabits	.1.3.6.1.4.1.97.3.14.1.1.3
swanIpNeighborAddressmandatory Zero, or an IP address to assign to the port's neighbor.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.97.3.14.1.1.4
swanPPPActivemandatory	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.14.1.1.5
swanAlignmentErrorsmandatory	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.14.1.1.6
swanOverrunErrorsmandatory Number of received packets with data overrun errors, since the port was last enabled.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.14.1.1.7
swanPortTypemandatory	Enumeration Enumerated Values: 1 wan-unknown 2 wan-v11 3 wan-v24 4 wan-v35 5 wan-e1 6 wan-t1 7 wan-rs530 8 wan-t3	.1.3.6.1.4.1.97.3.14.1.1.8
swanLinkCostmandatory	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.14.1.1.9
swanMeshStatemandatory	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.14.1.1.10
swanLinkSubnetmandatory	OctetString	.1.3.6.1.4.1.97.3.14.1.1.11
swanLinkBridgemandatory	OctetString	.1.3.6.1.4.1.97.3.14.1.1.12
swanLinkPortmandatory	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.14.1.1.13
swanNegotiatemandatory	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.14.1.1.14
swanSwitchesmandatory Current port selected.	Enumerationr/w Enumerated Values: 1 wan-hssi 2 wan-t1 3 wan-hssi-switching-disabled 4 wan-t1-switching-disabled	.1.3.6.1.4.1.97.3.14.1.1.15
swanDCEDropsmandatory Number of instances when loss of DCE has been detected.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.14.1.1.16
swanOutPacketTypemandatory The type of out going packet to generate on the HSSI link.	Enumerationr/w Enumerated Values: 1 token-ring-without-FCS 2 token-ring-with-FCS 3 ethernet-without-FCS 4 ethernet-with-FCS	.1.3.6.1.4.1.97.3.14.1.1.17
swanLinkErrorPercentagemandatory The percentage of acceptible errors in hundreths of percent.	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.97.3.14.1.1.18
swanLinkErrorDurationmandatory The time period in hundredths of a second over which the error percentage should be applied.	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.97.3.14.1.1.19
swanLinkErrorFailPeriodsmandatory The maximum number of periods allowed to contain the error percentage before the link quality is determined to have failed.	Integer32r/w Constraints: range: 1-20	.1.3.6.1.4.1.97.3.14.1.1.20
swanLinkErrorMaxPeriodsmandatory The maximum number of periods to be used for calculation of link quality. Default is 10.	Integer32r/w Constraints: range: 1-20	.1.3.6.1.4.1.97.3.14.1.1.21
swanLinkRestartTimemandatory The time period in centiseconds which must contain error free LQR operation before restarting link.	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.97.3.14.1.1.22
swanPreserveFCSmandatory Preserve received FCS if true, else regenerate FCS on packet transmission.	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.97.3.14.1.1.23

SMC-specific status information and control variables for a
collection of repeater groups in a particular system.

srepeaterEntry row .1.3.6.1.4.1.97.3.16.1.1

SMC-specific status information and control variables for a
particular repeater domain (group) in the system.

Indexes

srepeaterGroupID

Column	Syntax	OID
srepeaterGroupIDmandatory The value of srepeaterGroupID is assigned so as to uniquely identify a repeater domain (group) in a system where a single agent manages multiple repeater domains.	Integer32 Constraints: range: 1-1024	.1.3.6.1.4.1.97.3.16.1.1.1
srepeaterLinkStatusMaskmandatory This mask provides quick access to the general connectivity of the repeater. Each bit corresponds to the link status of a repeater port. If the bit is set to 1 then link pulses are being received, as per the IEEE specif…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.16.1.1.2
srepeaterExtendedStatsmandatory When enabled(1), the rptrMonitorGroup, rptrMonitorPort, and rptrAddrTrack tables are available, and the CEIOM maintains frame-by-frame tallies for the repeater in order to support these tables. Bridging performance may …	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.16.1.1.3

SMC-specific status information and control variables for a
collection of repeater ports in a particular system.

srepeaterPortEntry row .1.3.6.1.4.1.97.3.16.2.1

SMC-specific status information and control variables for a
particular repeater port in the system.

Indexes

srepeaterPortGroupID srepeaterPortPortID

Column	Syntax	OID
srepeaterPortGroupIDmandatory The value of srepeaterPortGroupID is assigned so as to uniquely identify a group (repeater ID) in a system where a single agent manages multiple repeater groups. This corresponds to ifIndex, as well as rptr...GroupIndex…	Integer32 Constraints: range: 1-1024	.1.3.6.1.4.1.97.3.16.2.1.1
srepeaterPortPortIDmandatory Identifies a repeater port within a repeater group/domain. Values correspond to physical connector position on the CEIOM. For the CEIOM-24, the leftmost position is port 1, the rightmost port 24.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.16.2.1.2
srepeaterPortLinkPulsemandatory When enabled (the default), the repeater port generates and expects to receive a link pulse, as per 10BaseT specification. When disabled, the port does not generate or expect link pulse, in order to accommodate pre-10Ba…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.16.2.1.3

This table contains configuration information specifying
the types of protocols used to bridge, route, translate,
and filter frames for each port.

sprotoEntry row .1.3.6.1.4.1.97.3.17.1.1

Each entry in this table specifies which protocols are
used by a particular port in the ES/1.

Indexes

sprotoIfIndex

Column	Syntax	OID
sprotoIfIndexmandatory Identifies the interface (port) to which this entry's information belongs. The value of this variable corresponds to ifIndex, as well as most of the other port identification values in related MIBs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.17.1.1.1
sprotoBridgemandatory Defines the bridging method to be applied to frames received at, or destined for, this port. Ethernet and FDDI ports may be configured for transparent, srt, or none. Token Ring ports may be configured for any of the fo…	Enumerationr/w Enumerated Values: 1 transparent 2 sr 3 srt 4 none	.1.3.6.1.4.1.97.3.17.1.1.2
sprotoSuppressBpdusmandatory Allows transmission of spanning tree protocol packets to be suppressed. If normal(1), 802.1d spanning tree packets and source-routing spanning tree packets are transmitted as usual. If suppressed(2), these packets are …	Enumerationr/w Enumerated Values: 1 normal 2 suppressed	.1.3.6.1.4.1.97.3.17.1.1.3
sprotoIpRoutemandatory Specifies whether or not this port is to be used for IP routing.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.17.1.1.4
sprotoIpxRoutemandatory Specifies whether or not this port is to be used for Novell NetWare IPX routing.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 ipxsr	.1.3.6.1.4.1.97.3.17.1.1.5
sprotoAppleRoutemandatory Specifies whether or not this port is to be used for AppleTalk (tm) routing.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.17.1.1.6
sprotoArpTranslatemandatory These options are intended to compensate for any like- ly implementation of internet ARP on 802.5 token ring. If set to bitswap1(2), then embedded MAC addresses for ARP packets with hardwareType 1 (Ethernet) will be bit…	Enumerationr/w Enumerated Values: 1 none 2 bitswap1 3 bitswap6 4 bitswap61 5 oneto6 6 oneto6swap	.1.3.6.1.4.1.97.3.17.1.1.7
sprotoArpSourceRoutemandatory Specifies whether, when bridging TCP/IP ARP packets which are source-routing explorer frames, the routing information is to be stripped or propagated. If pass- Rif(1), the frame is bridged as is, with route- discovery p…	Enumerationr/w Enumerated Values: 1 passRif 2 stripRif 3 passBoth 4 none	.1.3.6.1.4.1.97.3.17.1.1.8
sprotoIpxTranslatemandatory Specifies whether, when bridging Novell IPX frames, they are to be translated to Ethernet-like frame for- mat. This option applies only to token ring ports.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.17.1.1.9
sprotoAppleTranslatemandatory Specifies whether, when bridging AppleTalk ELAP, TLAP, and AARP frames, those frames are to be translated between token ring and Ethernet format before being forwarded. This option applies only to token r…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.17.1.1.10
sprotoIbmLlcTranslatemandatory Specifies whether, when bridging IBM LLC frames, an 8209-style translation between token ring and Ethernet format is to be performed before being forwarded. This option applies only to token ring ports.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.17.1.1.11
sprotoRipmandatory Specifies whether the internet Routing Information Protocol (RFC-1058) is to be used over this port. Only valid if sprotoIpRoute is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.17.1.1.12
sprotoEgpmandatory Specifies whether the internet External Gateway Proto- col (RFC-904) is to be used over this port. Only valid if sprotoIpRoute is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.17.1.1.13
sprotoOspfmandatory Specifies whether the internet Open Shortest Path First protocol (RFC-1247) is to be used over this port. Only valid if sprotoIpRoute is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.17.1.1.14
sprotoArpProxymandatory Specifies whether the port is to respond to internet ARP requests for which the unit is the next hop in a routed path. Only valid if sprotoIpRoute is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.17.1.1.15
sprotoIbm8209Lsapsmandatory Specifies up to eight LSAPs for which IBM 8209-style token-ring-to-Ethernet encapsulation is to be performed. Only valid if sprotoIbmLLcTranslate is enabled. This option applies only to token ring ports.	OctetStringr/w	.1.3.6.1.4.1.97.3.17.1.1.16
sprotoBootpRelaymandatory Specifies whether or not this port is to relay BOOTP packets, as described in RFC-951 and subsequent internet-drafts. Only valid if IP routing is also enabled for this interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.17.1.1.17
sprotoNetbiosTranslatemandatory Specifies whether, when bridging Netbios packets which are source-routing explorer frames, the routing information is to be stripped or propagated. If pass- Rif(1), the frame is bridged as is, with route- discovery proc…	Enumerationr/w Enumerated Values: 1 passRif 2 stripRif 3 passBoth 4 none	.1.3.6.1.4.1.97.3.17.1.1.18
sprotoIpMulticastmandatory Specifies whether the internet Multicast Routing Protocol (RFC-1075) is to be used over this port. Only valid if sprotoIpRoute is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.17.1.1.19
sprotoTrunkingmandatory Specifies whether SMC's trunking protocol (an extension to the standard Spanning Tree) is to be used over this port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.17.1.1.20
sprotoIpxSrTranslatemandatory Specifies whether, when bridging IPX packets which are source-routing explorer frames, the routing information is to be stripped or propagated. If pass- Rif(1), the frame is bridged as is, with route- discovery proceedi…	Enumerationr/w Enumerated Values: 1 passRif 2 stripRif 3 passBoth 4 none	.1.3.6.1.4.1.97.3.17.1.1.22
sprotoAllTranslatemandatory Specifies whether, when bridging any source-routed explorer frames, the routing information is to be stripped or propagated. If passRif(1), the frame is bridged as is, with route-discovery proceeding as expected. …	Enumerationr/w Enumerated Values: 1 passRif 2 stripRif 3 passBoth 4 none	.1.3.6.1.4.1.97.3.17.1.1.23
sprotoSteHopCountAppliedRulemandatory hopcountnotapplied(1), STE hop count rules are not applied to STE frames. Default for SR ports. Follows IBM's specifications. hopcountapplied(2), STE hop count rules are applied to STE frames. Default SRT po…	Enumerationr/w Enumerated Values: 1 hopcountnotapplied 2 hopcountapplied	.1.3.6.1.4.1.97.3.17.1.1.24

Describes per-interface attributes of IPX routing.

sipxIfEntry row .1.3.6.1.4.1.97.3.18.1.1

For a particular interface, defines the IPX routing
information.

Indexes

sipxIfIndex

Column	Syntax	OID
sipxIfIndexmandatory Used to index through the interfaces (ports) on the ES/1, when used as an IPX router. Identical to ifIndex. Entries exist for all external interfaces, whether or not they are actually populated or configured for IPX rou…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.18.1.1.1
sipxIfNetworkmandatory The IPX network number associated with this interface.	OctetStringr/w	.1.3.6.1.4.1.97.3.18.1.1.2
sipxIfFramingmandatory Defines the link-level framing to be used for this interface. Options 1-4 are available for Ethernet; options 3 and 4 are valid for token ring; options 3-5 are valid for FDDI links.	Enumerationr/w Enumerated Values: 1 ethernet8023 2 ethernet2 3 ieee8022 4 snap 5 rawfddi 6 ppp	.1.3.6.1.4.1.97.3.18.1.1.3
sipxIfInRipPktsmandatory Number of IPX Routing Information Protocol packets received on this interface.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.18.1.1.4
sipxIfOutRipPktsmandatory Number of IPX Routing Information Protocol packets transmitted on this interface.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.18.1.1.5
sipxIfInSapPktsmandatory Number of IPX Service Advertising Protocol packets received on this interface.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.18.1.1.6
sipxIfOutSapPktsmandatory Number of IPX Service Advertising Protocol packets transmitted on this interface.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.18.1.1.7

This router's IPX Routing table.

sipxRouteEntry row .1.3.6.1.4.1.97.3.18.2.1

A route to a particular destination.

Indexes

sipxRouteDest

Column	Syntax	OID
sipxRouteDestmandatory The destination network address of this route.	OctetString	.1.3.6.1.4.1.97.3.18.2.1.1
sipxRouteIfIndexmandatory The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.18.2.1.2
sipxRouteTickCountmandatory The primary routing metric for this route, which is an estimate of the number of 55 millisecond ticks that are needed to reach the destination.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.18.2.1.3
sipxRouteHopCountmandatory The secondary routing metric for this route, which is the number of routers that must be traversed to reach the destination.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.18.2.1.4
sipxRouteNextHopmandatory The IPX node address of the next hop of this route, if indirect. If direct, the address of the local interface.	OctetString	.1.3.6.1.4.1.97.3.18.2.1.5
sipxRouteAgemandatory The number of seconds since this route was last updated.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.18.2.1.6

This router's IPX service advertising cache table.

sipxSapEntry row .1.3.6.1.4.1.97.3.18.3.1

An IPX service definition, as advertised by the SAP
protocol and distributed through the SAP cache of
this router.

Indexes

sipxSapIndex

Column	Syntax	OID
sipxSapIndexmandatory Used only as an artificial index to this table. Has no independent meaning.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.18.3.1.1
sipxSapTypemandatory Identifies the type of service provided by the server. Values range 0..ffff, and are defined by Novell.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.18.3.1.2
sipxSapNamemandatory Server Name.	OctetString	.1.3.6.1.4.1.97.3.18.3.1.3
sipxSapNetworkmandatory The IPX network address of the server providing the indicated service.	OctetString	.1.3.6.1.4.1.97.3.18.3.1.4
sipxSapNodeIdmandatory The IPX node address of the server. With NetWare 2.x, this corresponds to a physical MAC address, represented here in canonical (little-endian) bit order. With NetWare 3.x, it is typically 00:00:00:00:00:01.	OctetString	.1.3.6.1.4.1.97.3.18.3.1.5
sipxSapSocketmandatory The socket number to which service requests should be addressed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.18.3.1.6
sipxSapHopCountmandatory A count of the number of routers that must be traversed to reach this server.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.18.3.1.7

This table defines the filtering criteria to be
applied to Netware service advertisements. There can
be no more than one filter per service name. Each
filter is identified by a simple integer, which
is more concise than the name if it were to be
used as an index.

sipxsfEntry row .1.3.6.1.4.1.97.3.18.6.2.1

Defines the filtering criteria to be applied to a
particular service name.

Indexes

sipxsfIndex

Column	Syntax	OID
sipxsfIndexmandatory Assigned by the configurer to identify this filter. This index has no relationship to sipxSapIndex.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.18.6.2.1.1
sipxsfSAPNamemandatory The service name. `*' can be used as wild card character which match all names.	OctetStringr/w	.1.3.6.1.4.1.97.3.18.6.2.1.2
sipxsfSAPTypemandatory The service type. Minus one or 65535 indicates all services of this name. Otherwise, the values are defined by Novell and other service providers (e.g., file server = 4).	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.18.6.2.1.3
sipxsfAccessModemandatory Permitted(1) allows the service name to be accepted or broadcasted. Denied(2) ignores the service name. Invalid(3) invalidates the filter entry.	Enumerationr/w Enumerated Values: 1 permitted 2 denied 3 invalid	.1.3.6.1.4.1.97.3.18.6.2.1.4
sipxsfFilterTypemandatory If entry(1), filter is for the incoming named service. If exit(2), filter is for the outgoing named service.	Enumerationr/w Enumerated Values: 1 entry 2 exit	.1.3.6.1.4.1.97.3.18.6.2.1.5
sipxsfPortMapmandatory A bit map defining port numbers to which the filter is applied. Octet 1 specifies port 1 to 8, octet 2 specifies port 9 to 16, and so on. Within each octet, the MSB maps to the lowerest port, and LSB maps to the highest…	OctetStringr/w	.1.3.6.1.4.1.97.3.18.6.2.1.6
sipxsfNetworksmandatory A list of network addresses to which the filter is applied. Each network address consists of 4 octets (i.e. a LONG word). For filter with FilterType entry(1), this parameter is ignored. Initial implementation also ignor…	OctetStringr/w	.1.3.6.1.4.1.97.3.18.6.2.1.7
sipxsfFilteredmandatory Number of times the service has been filtered.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.18.6.2.1.8

IPX SR explorer configuration Table.

sipxsrExplorerEntry row .1.3.6.1.4.1.97.3.18.7.2.1

IPX SR explorer configuration for each port.

Indexes

sipxsrPort

Column	Syntax	OID
sipxsrPortmandatory Port number.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.18.7.2.1.1
sipxsrStatusmandatory valid(1) to configure explorer type; invalid(2) to remove explorer configuration and default to STE.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.97.3.18.7.2.1.2
sipxsrExplorerTypemandatory use ARE or STE for explorer frame.	Enumerationr/w Enumerated Values: 1 are 2 ste	.1.3.6.1.4.1.97.3.18.7.2.1.3

This table contains configuration information controlling
operation of the router discovery protocol (RFC-1256).

srtrdiscEntry row .1.3.6.1.4.1.97.3.19.1.1

Each entry in this table configures the router discovery
protocol for the particular interface.

Indexes

srtrdiscIfIndex

Column	Syntax	OID
srtrdiscIfIndexmandatory Identifies the interface (port) to which this entry's information belongs. The value of this variable corresponds to ifIndex, as well as most of the other port identification values in related MIBs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.19.1.1.1
srtrdiscStatemandatory Specifies whether or not the router discovery protocol is in use for this interface. Defaults to disabled(2).	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.97.3.19.1.1.2
srtrdiscAdvertisementAddressmandatory The IP address to be used for multicast router advertisements for this interface. If multicast(1), the all-systems multicast 224.0.0.1 is used. If broadcast, the limited-broadcast 255.255.255.255 is used.	Enumerationr/w Enumerated Values: 1 multicast 2 broadcast	.1.3.6.1.4.1.97.3.19.1.1.3
srtrdiscAdvertisementIntervalmandatory The interval at which multicast router advertisements are to be transmitted, in seconds. Allowable values range between 4 and 1800.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.19.1.1.4
srtrdiscLifetimemandatory The value to be used for the Lifetime field of router advertisements. Values range from srtrdiscAdvertisementInterval to 9000.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.19.1.1.5
srtrdiscPreferencemandatory The preferability of this interface's address as a default router, relative to other routers on the same subnet.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.19.1.1.6

The (conceptual) table listing the origin routes that this
router learns from neighboring routers and from initial
installations of directly-connected routes. Origin is
defined to be the subnetwork that can originate multicast
packets.

sipmRouteEntry row .1.3.6.1.4.1.97.3.20.1.1.1

An entry (conceptual row) representing information on an
origin route when IPM is enabled.

Indexes

sipmRouteOrigin sipmRouteOriginMask

Column	Syntax	OID
sipmRouteOriginmandatory The subnetwork address of the origin.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.97.3.20.1.1.1.1
sipmRouteOriginMaskmandatory The subnetwork mask of the origin.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.97.3.20.1.1.1.2
sipmRouteGatewaymandatory The next hop gateway toward the origin. This object has the value 0.0.0.0 for directly-connected routes.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.97.3.20.1.1.1.3
sipmRouteMetricmandatory The distance to this origin in number of hops.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.20.1.1.1.4
sipmRouteAgemandatory The time left for this origin route before aged out.	RFC1155-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.20.1.1.1.5
sipmRouteParentsmandatory The bitmapped incoming port(s) for which this origin is learned. This is an octet string of length 8. The least significant bit of the eighth octet is port 0. The least significant bit of the seventh octet is port 9 and…	OctetString	.1.3.6.1.4.1.97.3.20.1.1.1.6

The (conceptual) table listing the neighboring routers
on each interface port.

sipmNeighborEntry row .1.3.6.1.4.1.97.3.20.3.1.1

An entry (conceptual row) all neighbors which are learned
from this local interface port.

Indexes

sipmNeighborIfIndex sipmNeighbors

Column	Syntax	OID
sipmNeighborIfIndexmandatory The ifIndex value of the interface for which this entry contains information.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.20.3.1.1.1
sipmNeighborsmandatory The neighbor's IP address which was learned.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.97.3.20.3.1.1.2
sipmNeighborLastHeardmandatory The elapsed time since the neighbor was last heard.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.20.3.1.1.3

The (conceptual) table containing multicast routing
statistics for IP datagrams on a per port basis.

sipmStatEntry row .1.3.6.1.4.1.97.3.20.4.2.1

An entry (conceptual row) containing the multicast routing
statistic for IP datagrams on a particular port.

Indexes

sipmStatIfIndex

Column	Syntax	OID
sipmStatIfIndexmandatory The interface port number on which corresponding IPM statistics gather.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.20.4.2.1.1
sipmInBadPacketsmandatory The number of bad packets received which may include unknown DVMRP/IGMP messages, short packets, and checksum errors.	RFC1155-SMICounterr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.20.4.2.1.2
sipmCacheMissmandatory The number of times IP Multicast packets need to lookup a route at the IP layer for determining forwarding path.	RFC1155-SMICounterr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.3.20.4.2.1.3

Defines attributes of IP circuits. A circuit is defined
as a binding of a network number to a physical interface.

sipcktEntry row .1.3.6.1.4.1.97.3.21.1.1

Defines the attributes of a binding of IP address and network to
physical interface.

Indexes

sipcktIndex sipcktIpAddress

Column	Syntax	OID
sipcktIndexmandatory Identifies the physical interface. Identical to ifIndex.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.3.21.1.1.1
sipcktIpAddressmandatory Identifies the IP network that is bound to this interface.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.97.3.21.1.1.2
sipcktStatemandatory The status of this binding.	Enumerationr/w Enumerated Values: 1 valid 2 invalid 3 invalid-all 4 netmask-conflict	.1.3.6.1.4.1.97.3.21.1.1.3
sipcktNetMaskmandatory The subnet mask for the network associated with this address binding. If set to 0.0.0.0, will default to standard class A/B/C mask, depending on the value of sipcktIpAddress.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.97.3.21.1.1.4
sipcktSourceRoutemandatory Specifies the behavior of IP routing with respect to (link-layer) source routing for this circuit. If default(1) then behavior depends on whether the port is token ring or not. If token ring then ARP requests are sent b…	Enumerationr/w Enumerated Values: 1 default 2 sr 3 no-sr 4 both	.1.3.6.1.4.1.97.3.21.1.1.5