CM-ENTITY-MIB Table View

Entries may be auto discovered, or can be explicitly created by 
SNMP Manager.  Each remotely discovered shelf is represented as 
a row in this table.

networkElementEntry row .1.3.6.1.4.1.2544.1.12.3.1.1.1

A conceptual row in the networkElementTable.

Indexes

neIndex

Column	Syntax	OID
neIndex An arbitrary integer index value used to uniquely identify a NetworkElement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.1.1.1
neName An administratively-assigned name for the Network Element. By convention, this is the node's fully-qualified domain name.	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.2544.1.12.3.1.1.1.2
neType Type of Network Element.	NetworkElementTyper/w Type Values: 1 onerackunit 2 hubshelf 3 cle 4 aggregation 5 cpmr 6 ccge101 7 ccge206 8 ccge201 9 ccge201se 10 ccge206f 11 ccge112 12 ccge114 13 ccge206v 14 ccxg210 15 cct1804 16 cct3204 17 ccsyncprobe 18 ccge114h 19 ccge114ph 20 ccge114sh 21 ccge114s 22 sh1pcs 23 ccosa5411 24 ccge112pro 25 ccge112proM 26 ccge114pro 27 ccge114proC 28 ccge114proSH 29 ccge114proCSH 30 ccge114proHE 31 ccge112proH 32 ccxg210c 33 ccosa5420 34 ccosa5421 35 ccge114g	.1.3.6.1.4.1.2544.1.12.3.1.1.1.3
neContact The textual identification of the contact person for the Network Element, together with information on how to contact this person.	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.2544.1.12.3.1.1.1.4
neLocation The physical location of this node (e.g., `telephone closet, 3rd floor').	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.2544.1.12.3.1.1.1.5
neDescription A textual description of the Network Element. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that …	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.2544.1.12.3.1.1.1.6
neCmdPromptPrefix User specified command prompt prefix, used by the CLI, at the Network Element level.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2544.1.12.3.1.1.1.7
neAccepted Indicates whether or not the Network Element is accepted or not. When the system's autoProvMode(CM-SYSTEM-MIB) is 'confirm', NetworkElement's are discovered with this object as 'false'. User must invoke the 'accept' act…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.3.1.1.1.8
neFromPort The Network Element port to which this Network Element is connected.	SNMPv2-TCVariablePointerr/w Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.3.1.1.1.9
neProvAction When the system's autoProvMode(CM-SYSTEM-MIB) is 'confirm', NetworkElement's are discovered with 'neAccepted' object as 'false'. User must invoke the 'accept' action on this object to accept the NetworkElement. User c…	NeProvActionr/w Type Values: 1 accept 2 decline	.1.3.6.1.4.1.2544.1.12.3.1.1.1.10
neStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.3.1.1.1.11
neRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The value…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.3.1.1.1.12
neAutoProvMode Autoprovisioning mode which controls automatic creation of cards plugged into the slots of Network Element. Supported values are off(1) and auto(3). When neAutoProvMode is auto then the cards inserted into the slots of …	CM-SYSTEM-MIBCmAutoProvModer/w Type Values: 1 off 2 confirm 3 auto	.1.3.6.1.4.1.2544.1.12.3.1.1.1.13
neFineGrainedPmInterval Allows specification of the fine-grained PM interval at the Network Element level. Value of this objec is propagated to all the cards beloning to the Network Element. This applies to all monitored PM entities. The defau…	CM-COMMON-MIBCmPmIntervalTyper/w Type Values: 1 interval-15min 2 interval-1day 3 rollover 4 interval-5min	.1.3.6.1.4.1.2544.1.12.3.1.1.1.14

Contains information on shelf within the NetworkElement.
In the case of FSP150CM, there is a single shelf for each
NetworkElement.

shelfEntry row .1.3.6.1.4.1.2544.1.12.3.1.2.1

A conceptual row in the shelfTable.

Indexes

neIndex shelfIndex

Column	Syntax	OID
shelfIndex An integer index value used to uniquely identify a Shelf within a NetworkElement.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.2.1.1
shelfEntityIndex Entity Index from ENTITY-MIB for this shelf.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.2.1.2
shelfType Shelf Type of the shelf.	ShelfTyper/w Type Values: 1 onerackunit 2 hubshelf 3 cle 4 aggregation 5 cpmr 6 onerackunit-ge101 7 onerackunit-ge206 8 onerackunit-ge201 9 onerackunit-ge201se 10 onerackunit-ge206f 11 onerackunit-ge112 12 onerackunit-ge114 13 onerackunit-ge206v 14 onerackunit-xg210 15 onerackunit-t1804 16 onerackunit-t3204 17 onerackunit-syncprobe 18 onerackunit-ge114h 19 onerackunit-ge114ph 20 onerackunit-ge114sh 21 onerackunit-ge114s 22 onerackunit-sh1pcs 23 onerackunit-osa5411 24 onerackunitGe112Pro 25 ge112ProM 26 onerackunitGe114Pro 27 onerackunitGe114ProC 28 onerackunitGe114ProSH 29 onerackunitGe114ProCSH 30 onerackunitGe114ProHE 31 onerackunitGe112ProH 32 onerackunit-xg210c 33 onerackunit-osa5420 34 onerackunit-osa5421 35 onerackunit-ge114g	.1.3.6.1.4.1.2544.1.12.3.1.2.1.3
shelfbackplaneRev The backplane revision number.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.3.1.2.1.4
shelfbackplaneDOM Backplane Date of Manufacture.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2544.1.12.3.1.2.1.5
shelfbackplaneSerialNo Backplane Serial Number.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2544.1.12.3.1.2.1.6
shelfAction Invoke action on the shelf, such as lamp test.	ShelfActionr/w Type Values: 1 initiateLampTest 2 initiateACO 3 coldRestart	.1.3.6.1.4.1.2544.1.12.3.1.2.1.7
shelfAdminState Administrative State of the Shelf.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.2.1.8
shelfOperationalState Operational State of the Shelf.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.2.1.9
shelfSecondaryState Secondary State of the Shelf.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.2.1.10
shelfMfgSite This is the shelf's Manufacturer site.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.3.1.2.1.11
shelfOscillatorType The mOscillatorType.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.3.1.2.1.12

Contains information on slot within the Shelf.

slotEntry row .1.3.6.1.4.1.2544.1.12.3.1.3.1

A conceptual row in the slotTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
slotIndex The actual physical slot index that uniquely identify a Slot within a shelf. Slot number 255 is used to indicate system level entities.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.3.1.1
slotEntityIndex Entity Index from ENTITY-MIB for this slot.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.3.1.2
slotType Slot Type of the slot. 'generic' slots can hold NEMI card as well as line cards.	SlotType Type Values: 1 scu 2 psu 3 fan 4 generic 5 lag 6 nemi 7 stu 8 swf-140g 9 ami 10 sti	.1.3.6.1.4.1.2544.1.12.3.1.3.1.3
slotCardType Card Type of the slot.	CardType Type Values: 1 none 2 psu 3 fan 4 nemi 5 scu 6 eth-10-100-1000-ntu 7 eth-cpmr 8 eth-ge-101 9 eth-ge-206 10 eth-ge-201 11 eth-ge-201se 12 eth-10-100-1000-nte 13 scu-t 14 eth-ge-206f 15 eth-xg-1x 16 swf-140g 17 stu 18 eth-ge-10s 19 ami 20 sti 21 eth-ge-112 22 eth-ge-114 23 eth-ge-206v 24 eth-ge-4e-cc 25 eth-ge-4s-cc 26 eth-xg-210 27 eth-xg-1x-cc 28 eth-xg-1s-cc 29 stm1-4-et 30 pwe3-ocnstm 31 pwe3-e1t1 32 eth-xg-1x-h 33 eth-ge-10s-h 34 eth-t1804 35 eth-t3204 36 eth-ge-syncprobe 37 eth-ge-8s-cc 38 eth-ge-114h 39 eth-ge-114ph 40 eth-fe-36e 41 eth-ge-114sh 42 eth-ge-114s 43 sti-h 44 stu-h 45 eth-ge-8e-cc 46 eth-sh1pcs 47 eth-osa5411 48 ethGe112Pro 49 ethGe112ProM 50 ethGe114Pro 51 ethGe114ProC 52 ethGe114ProSH 53 ethGe114ProCSH 54 ethGe114ProHE 55 ethGe112ProH 56 eth-xg-210c 57 eth-ge-8sc-cc 58 eth-osa5420 59 eth-osa5421 60 bits-x16 61 eth-ge-114g	.1.3.6.1.4.1.2544.1.12.3.1.3.1.4
slotCardUnitName This is the inserted card's unit name.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.3.1.3.1.5
slotCardFormatVersion This is the inserted card's format version.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2544.1.12.3.1.3.1.6
slotCardCLEICode This is the inserted card's CLEI code.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.3.1.3.1.7
slotCardPartNumber This is the inserted card's Part Number.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2544.1.12.3.1.3.1.8
slotCardHwRev This is the inserted card's Hardware Revision.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.3.1.3.1.9
slotCardSwRev This is the inserted card's Software Revision.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.3.1.3.1.10
slotCardSerialNum This is the inserted card's Serial Number.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2544.1.12.3.1.3.1.11
slotCardMfgName This is the inserted card's Manufacturer Name.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.3.1.3.1.12
slotCardMfgDate This is the inserted card's Manufacturer date.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2544.1.12.3.1.3.1.13
slotCardMfgSite This is the inserted card's Manufacturer site.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.3.1.3.1.14
slotSecondaryState Secondary State of the Slot.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.3.1.15
slotCardPhysicalAddress This is the inserted card's MAC Address, if applicable.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2544.1.12.3.1.3.1.16

Contains information on Power Supply Units within the Shelf.

psuEntry row .1.3.6.1.4.1.2544.1.12.3.1.4.1

A conceptual row in the psuTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
psuEntityIndex Entity Index from ENTITY-MIB for this PSU.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.4.1.1
psuType PSU Type of the PSU.	PsuType Type Values: 0 unknown 1 ac 2 dc	.1.3.6.1.4.1.2544.1.12.3.1.4.1.2
psuAdminState Administrative State of the PSU.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.4.1.3
psuOperationalState Operational State of the PSU.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.4.1.4
psuSecondaryState Secondary State of the PSU.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.4.1.5
psuOutputVoltage Output Voltage of the PSU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.4.1.6
psuTemperature Temperature of the PSU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.4.1.7
psuOutputCurrent Output Current of the PSU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.4.1.8
psuStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.3.1.4.1.9
psuRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The value…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.3.1.4.1.10

Contains information on FANs within the Shelf.

fanEntry row .1.3.6.1.4.1.2544.1.12.3.1.5.1

A conceptual row in the fanTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
fanEntityIndex Entity Index from ENTITY-MIB for this FAN.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.5.1.1
fanAdminState Administrative State of the FAN.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.5.1.2
fanOperationalState Operational State of the FAN.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.5.1.3
fanSecondaryState Secondary State of the FAN.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.5.1.4
fanStorageType Storage Type of the FAN.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.3.1.5.1.5
fanRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.3.1.5.1.6

Contains information on SCU within the Shelf.

scuEntry row .1.3.6.1.4.1.2544.1.12.3.1.6.1

A conceptual row in the scuTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
scuEntityIndex Entity Index from ENTITY-MIB for the SCU card.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.6.1.1
scuAdminState Administrative State of the SCU.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.6.1.2
scuOperationalState Operational State of the SCU.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.6.1.3
scuSecondaryState Secondary State of the SCU.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.6.1.4
scuVoltage Voltage of the SCU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.6.1.5
scuTemperature Temperature of the SCU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.6.1.6
scuRestartAction Allows to perform specified action on the SCU card.	CM-COMMON-MIBRestartTyper/w Type Values: 0 not-applicable 1 warm-start 2 cold-start	.1.3.6.1.4.1.2544.1.12.3.1.6.1.7
scuStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.3.1.6.1.8
scuRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The value…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.3.1.6.1.9
scuFlashModelNum This provides the Compact Flash Model Number on the SCU card.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2544.1.12.3.1.6.1.10
scuFlashFirmwareRev This provides the Compact Flash Firmware Revision on the SCU card.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2544.1.12.3.1.6.1.11
scuFlashSerialNum This provides the Compact Flash Serial Number on the SCU card.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2544.1.12.3.1.6.1.12

Contains information on NEMI within the Shelf.

nemiEntry row .1.3.6.1.4.1.2544.1.12.3.1.7.1

A conceptual row in the nemiTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
nemiEntityIndex Entity Index from ENTITY-MIB for the NEMI card.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.7.1.1
nemiAdminState Administrative State of the NEMI.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.7.1.2
nemiOperationalState Operational State of the NEMI.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.7.1.3
nemiSecondaryState Secondary State of the NEMI.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.7.1.4
nemiVoltage Voltage of the NEMI.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.7.1.5
nemiTemperature Temperature of the NEMI.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.7.1.6
nemiRestartAction Allows to perform specified action on the NEMI card.	CM-COMMON-MIBRestartTyper/w Type Values: 0 not-applicable 1 warm-start 2 cold-start	.1.3.6.1.4.1.2544.1.12.3.1.7.1.7
nemiStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.3.1.7.1.8
nemiRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The value…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.3.1.7.1.9
nemiForceOffLineAction On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is releas…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.3.1.7.1.10
nemiFlashModelNum This provides the Flash Model Number on the NEMI card.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2544.1.12.3.1.7.1.11
nemiFlashFirmwareRev This provides the Flash Firmware Revision on the NEMI card.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2544.1.12.3.1.7.1.12
nemiFlashSerialNum This provides the Flash Serial Number on the NEMI card.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2544.1.12.3.1.7.1.13

Contains information on Ethernet NTU Cards within the Shelf.
These cards support 10M, 100M and 1G Ethernet Interfaces.

ethernetNTUCardEntry row .1.3.6.1.4.1.2544.1.12.3.1.8.1

A conceptual row in the ethernetNTUCardTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
ethernetNTUCardEntityIndex Entity Index from ENTITY-MIB for the Ethernet NTU Card.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.8.1.1
ethernetNTUCardAdminState Administrative State of the Ethernet NTU Card.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.8.1.2
ethernetNTUCardOperationalState Operational State of the Ethernet NTU Card.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.8.1.3
ethernetNTUCardSecondaryState Secondary State of the Ethernet NTU Card.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.8.1.4
ethernetNTUCardVoltage Voltage of the Ethernet NTU Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.8.1.5
ethernetNTUCardTemperature Temperature of the Ethernet NTU Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.8.1.6
ethernetNTUCardSnmpDyingGaspEnabled Whether or not SNMP dying gasp is enabled on the Ethernet NTU Card.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.3.1.8.1.7
ethernetNTUCardRestartAction Allows to perform specified action on the Ethernet NTU card.	CM-COMMON-MIBRestartTyper/w Type Values: 0 not-applicable 1 warm-start 2 cold-start	.1.3.6.1.4.1.2544.1.12.3.1.8.1.8
ethernetNTUCardStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.3.1.8.1.9
ethernetNTUCardRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The value…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.3.1.8.1.10

Contains information on Ethernet CPMR Cards within the Shelf.

ethernetCPMRCardEntry row .1.3.6.1.4.1.2544.1.12.3.1.9.1

A conceptual row in the ethernetCPMRCardTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
ethernetCPMRCardEntityIndex Entity Index from ENTITY-MIB for the Ethernet CPMR Card.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.9.1.1
ethernetCPMRCardAdminState Administrative State of the Ethernet CPMR Card.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.9.1.2
ethernetCPMRCardOperationalState Operational State of the Ethernet CPMR Card.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.9.1.3
ethernetCPMRCardSecondaryState Secondary State of the Ethernet CPMR Card.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.9.1.4
ethernetCPMRCardVoltage Voltage of the Ethernet CPMR Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.9.1.5
ethernetCPMRCardTemperature Temperature of the Ethernet CPMR Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.9.1.6
ethernetCPMRCardRestartAction Allows to perform specified action on the Ethernet CPMR card.	CM-COMMON-MIBRestartTyper/w Type Values: 0 not-applicable 1 warm-start 2 cold-start	.1.3.6.1.4.1.2544.1.12.3.1.9.1.7
ethernetCPMRCardPSU1State Operational State of Power Supply Unit 1 on Ethernet CPMR chassis.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.9.1.8
ethernetCPMRCardPSU2State Operational State of Power Supply Unit 2 on Ethernet CPMR chassis.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.9.1.9
ethernetCPMRCardFAN1State Operational State of FAN 1 on Ethernet CPMR chassis.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.9.1.10
ethernetCPMRCardFAN2State Operational State of FAN 2 on Ethernet CPMR chassis.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.9.1.11
ethernetCPMRCardPsuType PSU Type on Ethernet CPMR chassis.	PsuType Type Values: 0 unknown 1 ac 2 dc	.1.3.6.1.4.1.2544.1.12.3.1.9.1.12
ethernetCPMRCardLLFMode Current Link Loss Forwarding Mode on CPMR.	CmCPMRLinkLossFwdMode Type Values: 1 llfmode-none 2 llfmode-acc2acc 3 llfmode-net2acc 4 llfmode-both	.1.3.6.1.4.1.2544.1.12.3.1.9.1.13
ethernetCPMRCardLLFModeAction Operation to set the appropriate mode on CPMR.	CmCPMRLinkLossFwdModer/w Type Values: 1 llfmode-none 2 llfmode-acc2acc 3 llfmode-net2acc 4 llfmode-both	.1.3.6.1.4.1.2544.1.12.3.1.9.1.14

Contains information on Ethernet NTE GE101 Cards.
These are supported on the FSP150CC GE101 product.

ethernetNTEGE101CardEntry row .1.3.6.1.4.1.2544.1.12.3.1.10.1

A conceptual row in the ethernetNTEGE101CardTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
ethernetNTEGE101CardEntityIndex Entity Index from ENTITY-MIB for the Ethernet NTE GE101 Card.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.10.1.1
ethernetNTEGE101CardAdminState Administrative State of the Ethernet NTE GE101 Card.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.10.1.2
ethernetNTEGE101CardOperationalState Operational State of the Ethernet NTE GE101 Card.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.10.1.3
ethernetNTEGE101CardSecondaryState Secondary State of the Ethernet NTE GE101 Card.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.10.1.4
ethernetNTEGE101CardVoltage Voltage of the Ethernet NTE GE101 Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.10.1.5
ethernetNTEGE101CardTemperature Temperature of the Ethernet NTE GE101 Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.10.1.6
ethernetNTEGE101CardSnmpDyingGaspEnabled Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE101 Card.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.3.1.10.1.7
ethernetNTEGE101CardRestartAction Allows to perform specified action on the Ethernet NTE GE101 card.	CM-COMMON-MIBRestartTyper/w Type Values: 0 not-applicable 1 warm-start 2 cold-start	.1.3.6.1.4.1.2544.1.12.3.1.10.1.8

Contains information on Ethernet NTE GE206 Cards.
These are supported on the FSP150CC GE206 product.

ethernetNTEGE206CardEntry row .1.3.6.1.4.1.2544.1.12.3.1.11.1

A conceptual row in the ethernetNTEGE206CardTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
ethernetNTEGE206CardEntityIndex Entity Index from ENTITY-MIB for the Ethernet NTE GE206 Card.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.11.1.1
ethernetNTEGE206CardAdminState Administrative State of the Ethernet NTE GE206 Card.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.11.1.2
ethernetNTEGE206CardOperationalState Operational State of the Ethernet NTE GE206 Card.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.11.1.3
ethernetNTEGE206CardSecondaryState Secondary State of the Ethernet NTE GE206 Card.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.11.1.4
ethernetNTEGE206CardVoltage Voltage of the Ethernet NTE GE206 Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.11.1.5
ethernetNTEGE206CardTemperature Temperature of the Ethernet NTE GE206 Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.11.1.6
ethernetNTEGE206CardSnmpDyingGaspEnabled Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE206 Card.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.3.1.11.1.7
ethernetNTEGE206CardRestartAction Allows to perform specified action on the Ethernet NTE GE206 card.	CM-COMMON-MIBRestartTyper/w Type Values: 0 not-applicable 1 warm-start 2 cold-start	.1.3.6.1.4.1.2544.1.12.3.1.11.1.8
ethernetNTEGE206CardFineGrainedPmInterval Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15mi…	CM-COMMON-MIBCmPmIntervalTyper/w Type Values: 1 interval-15min 2 interval-1day 3 rollover 4 interval-5min	.1.3.6.1.4.1.2544.1.12.3.1.11.1.9

Contains information on Pseudo Wire E3 (Emulation Edge to Edge) Cards.
These are supported on the FSP150CC GE206 product.

pseudoWireE3CardEntry row .1.3.6.1.4.1.2544.1.12.3.1.12.1

A conceptual row in the pseudoWireE3CardTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
pseudoWireE3CardEntityIndexobsolete Entity Index from ENTITY-MIB for the Pseudo Wire E3 Card.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.12.1.1
pseudoWireE3CardAdminStateobsolete Administrative State of the Pseudo Wire E3 Card.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.12.1.2
pseudoWireE3CardOperationalStateobsolete Operational State of the Pseudo Wire E3 Card.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.12.1.3
pseudoWireE3CardSecondaryStateobsolete Secondary State of the Pseudo Wire E3 Card.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.12.1.4
pseudoWireE3CardIpAddressobsolete External management IP Address of the Pseudo Wire E3 Card.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2544.1.12.3.1.12.1.5
pseudoWireE3CardIpNetmaskobsolete External management IP Net mask of the Pseudo Wire E3 Card.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2544.1.12.3.1.12.1.6
pseudoWireE3CardIpGatewayobsolete External management IP Gateway of the Pseudo Wire E3 Card.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2544.1.12.3.1.12.1.7
pseudoWireE3CardDhcpEnabledobsolete External management - whether DHCP is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.3.1.12.1.8
pseudoWireE3CardMgmtVlanIdobsolete External management VLAN Id for the Pseudo Wire E3 Card.	CM-COMMON-MIBVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.2544.1.12.3.1.12.1.9
pseudoWireE3CardTimeOfDayobsolete Time of day for the Pseudo Wire E3 Card.	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2544.1.12.3.1.12.1.10
pseudoWireE3CardRestartActionobsolete Allows to perform restart action on the Pseudo Wire E3 card.	CM-COMMON-MIBRestartTyper/w Type Values: 0 not-applicable 1 warm-start 2 cold-start	.1.3.6.1.4.1.2544.1.12.3.1.12.1.11

Contains information on SCU-T within the Shelf.

scuTEntry row .1.3.6.1.4.1.2544.1.12.3.1.13.1

A conceptual row in the scuTTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
scuTEntityIndex Entity Index from ENTITY-MIB for the SCU-T card.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.13.1.1
scuTAdminState Administrative State of the SCU-T.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.13.1.2
scuTOperationalState Operational State of the SCU-T.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.13.1.3
scuTSecondaryState Secondary State of the SCU-T.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.13.1.4
scuTVoltage Voltage of the SCU-T.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.13.1.5
scuTTemperature Temperature of the SCU-T.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.13.1.6
scuTRestartAction Allows to perform specified action on the SCU-T card.	CM-COMMON-MIBRestartTyper/w Type Values: 0 not-applicable 1 warm-start 2 cold-start	.1.3.6.1.4.1.2544.1.12.3.1.13.1.7
scuTStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.3.1.13.1.8
scuTRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The value…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.3.1.13.1.9

Contains information on Ethernet NTE Cards within the Shelf.
These cards support 10M, 100M and 1G Ethernet Interfaces.

ethernetNTECardEntry row .1.3.6.1.4.1.2544.1.12.3.1.14.1

A conceptual row in the ethernetNTECardTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
ethernetNTECardEntityIndex Entity Index from ENTITY-MIB for the Ethernet NTE Card.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.14.1.1
ethernetNTECardAdminState Administrative State of the Ethernet NTE Card.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.14.1.2
ethernetNTECardOperationalState Operational State of the Ethernet NTE Card.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.14.1.3
ethernetNTECardSecondaryState Secondary State of the Ethernet NTE Card.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.14.1.4
ethernetNTECardVoltage Voltage of the Ethernet NTE Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.14.1.5
ethernetNTECardTemperature Temperature of the Ethernet NTE Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.14.1.6
ethernetNTECardSnmpDyingGaspEnabled Whether or not SNMP dying gasp is enabled on the Ethernet NTE Card.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.3.1.14.1.7
ethernetNTECardRestartAction Allows to perform specified action on the Ethernet NTE card.	CM-COMMON-MIBRestartTyper/w Type Values: 0 not-applicable 1 warm-start 2 cold-start	.1.3.6.1.4.1.2544.1.12.3.1.14.1.8
ethernetNTECardStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.3.1.14.1.9
ethernetNTECardRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The value…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.3.1.14.1.10

Contains information on Ethernet NTE GE201 Cards.
These are supported on the FSP150CC GE201 product.

ethernetNTEGE201CardEntry row .1.3.6.1.4.1.2544.1.12.3.1.15.1

A conceptual row in the ethernetNTEGE201CardTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
ethernetNTEGE201CardEntityIndex Entity Index from ENTITY-MIB for the Ethernet NTE GE201 Card.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.15.1.1
ethernetNTEGE201CardAdminState Administrative State of the Ethernet NTE GE201 Card.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.15.1.2
ethernetNTEGE201CardOperationalState Operational State of the Ethernet NTE GE201 Card.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.15.1.3
ethernetNTEGE201CardSecondaryState Secondary State of the Ethernet NTE GE201 Card.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.15.1.4
ethernetNTEGE201CardVoltage Voltage of the Ethernet NTE GE201 Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.15.1.5
ethernetNTEGE201CardTemperature Temperature of the Ethernet NTE GE201 Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.15.1.6
ethernetNTEGE201CardSnmpDyingGaspEnabled Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE201 Card.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.3.1.15.1.7
ethernetNTEGE201CardRestartAction Allows to perform specified action on the Ethernet NTE GE201 card.	CM-COMMON-MIBRestartTyper/w Type Values: 0 not-applicable 1 warm-start 2 cold-start	.1.3.6.1.4.1.2544.1.12.3.1.15.1.8
ethernetNTEGE201CardFineGrainedPmInterval Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15mi…	CM-COMMON-MIBCmPmIntervalTyper/w Type Values: 1 interval-15min 2 interval-1day 3 rollover 4 interval-5min	.1.3.6.1.4.1.2544.1.12.3.1.15.1.9

Contains information on Ethernet NTE GE201SyncE Cards.
These are supported on the FSP150CC GE201SyncE product.

ethernetNTEGE201SyncECardEntry row .1.3.6.1.4.1.2544.1.12.3.1.16.1

A conceptual row in the ethernetNTEGE201SyncECardTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
ethernetNTEGE201SyncECardEntityIndex Entity Index from ENTITY-MIB for the Ethernet NTE GE201SyncE Card.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.16.1.1
ethernetNTEGE201SyncECardAdminState Administrative State of the Ethernet NTE GE201SyncE Card.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.16.1.2
ethernetNTEGE201SyncECardOperationalState Operational State of the Ethernet NTE GE201SyncE Card.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.16.1.3
ethernetNTEGE201SyncECardSecondaryState Secondary State of the Ethernet NTE GE201SyncE Card.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.16.1.4
ethernetNTEGE201SyncECardVoltage Voltage of the Ethernet NTE GE201SyncE Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.16.1.5
ethernetNTEGE201SyncECardTemperature Temperature of the Ethernet NTE GE201SyncE Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.16.1.6
ethernetNTEGE201SyncECardSnmpDyingGaspEnabled Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE201SyncE Card.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.3.1.16.1.7
ethernetNTEGE201SyncECardRestartAction Allows to perform specified action on the Ethernet NTE GE201SyncE card.	CM-COMMON-MIBRestartTyper/w Type Values: 0 not-applicable 1 warm-start 2 cold-start	.1.3.6.1.4.1.2544.1.12.3.1.16.1.8
ethernetNTEGE201SyncECardFineGrainedPmInterval Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15mi…	CM-COMMON-MIBCmPmIntervalTyper/w Type Values: 1 interval-15min 2 interval-1day 3 rollover 4 interval-5min	.1.3.6.1.4.1.2544.1.12.3.1.16.1.9

Contains information on Ethernet NTE GE206F Cards.
These are supported on the FSP150CC GE206 product.

ethernetNTEGE206FCardEntry row .1.3.6.1.4.1.2544.1.12.3.1.17.1

A conceptual row in the ethernetNTEGE206FCardTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
ethernetNTEGE206FCardEntityIndex Entity Index from ENTITY-MIB for the Ethernet NTE GE206 Card.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.17.1.1
ethernetNTEGE206FCardAdminState Administrative State of the Ethernet NTE GE206 Card.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.17.1.2
ethernetNTEGE206FCardOperationalState Operational State of the Ethernet NTE GE206 Card.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.17.1.3
ethernetNTEGE206FCardSecondaryState Secondary State of the Ethernet NTE GE206 Card.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.17.1.4
ethernetNTEGE206FCardVoltage Voltage of the Ethernet NTE GE206 Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.17.1.5
ethernetNTEGE206FCardTemperature Temperature of the Ethernet NTE GE206 Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.17.1.6
ethernetNTEGE206FCardSnmpDyingGaspEnabled Whether or not SNMP dying gasp is enabled on the Ethernet NTE GE206 Card.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.3.1.17.1.7
ethernetNTEGE206FCardRestartAction Allows to perform specified action on the Ethernet NTE GE206 card.	CM-COMMON-MIBRestartTyper/w Type Values: 0 not-applicable 1 warm-start 2 cold-start	.1.3.6.1.4.1.2544.1.12.3.1.17.1.8
ethernetNTEGE206FCardFineGrainedPmInterval Allows specification of the fine-grained PM interval at the card level. This applies to all monitored PM entities. The default value of this attribute is interval-15min. Valid values are interval-5min and interval-15mi…	CM-COMMON-MIBCmPmIntervalTyper/w Type Values: 1 interval-15min 2 interval-1day 3 rollover 4 interval-5min	.1.3.6.1.4.1.2544.1.12.3.1.17.1.9

Contains information on Ethernet  1x10G Cards.

ethernet1x10GCardEntry row .1.3.6.1.4.1.2544.1.12.3.1.18.1

A conceptual row in the ethernet1x10GCardTable.

Indexes

neIndex shelfIndex slotIndex

Column	Syntax	OID
ethernet1x10GCardEntityIndex Entity Index from ENTITY-MIB for the Ethernet 1x10G Card.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.18.1.1
ethernet1x10GCardAdminState Administrative State of the Ethernet 1x10G Card.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.3.1.18.1.2
ethernet1x10GCardOperationalState Operational State of the Ethernet 1x10G Card.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.3.1.18.1.3
ethernet1x10GCardSecondaryState Secondary State of the Ethernet 1x10G Card.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.3.1.18.1.4
ethernet1x10GCardTemperature Temperature of the Ethernet 1x10G Card.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.3.1.18.1.5
ethernet1x10GCardSnmpDyingGaspEnabled Whether or not SNMP dying gasp is enabled on the Ethernet 1x10G Card.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.3.1.18.1.6
ethernet1x10GCardRestartAction Allows to perform specified action on the Ethernet 1x10G card.	CM-COMMON-MIBRestartTyper/w Type Values: 0 not-applicable 1 warm-start 2 cold-start	.1.3.6.1.4.1.2544.1.12.3.1.18.1.7
ethernet1x10GCardStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.3.1.18.1.8
ethernet1x10GCardRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The value…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.3.1.18.1.9
ethernet1x10GCardForceOffLineAction On some condition, user wishes to make one card out of service and hold the reset signal of the card via AMI. When force offline is enabled, reset signal is held; When force offline is disabled, reset signal is releas…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.3.1.18.1.10