pseudoWireE1T1CardRowStatus

CM-ENTITY-MIB · .1.3.6.1.4.1.2544.1.12.3.1.35.1.11

Object

column r/w SNMPv2-TCRowStatus

The status of this row.  An entry MUST NOT exist in the 
active state unless all objects in the entry have an 
appropriate value, as described
in the description clause for each writable object.
              
The values of pseudoWireE1T1CardRowStatus supported are
createAndGo(4) and destroy(6).  All mandatory attributes
must be specified in a single SNMP SET request with
pseudoWireE1T1CardRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
              
The pseudoWireE1T1CardRowStatus object may be modified if
the associated instance of this object is equal to active(1).

Context

MIB: CM-ENTITY-MIB
OID: .1.3.6.1.4.1.2544.1.12.3.1.35.1.11
Type: column
Access: readwrite
Status: current
Parent: pseudoWireE1T1CardEntry
Table: pseudoWireE1T1CardTable
Siblings: 11

Syntax

SNMPv2-TCRowStatus

Source: SNMPv2-TCRowStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	active
`2`	notInService
`3`	notReady
`4`	createAndGo
`5`	createAndWait
`6`	destroy

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pseudoWireE1T1CardEntityIndex Entity Index from ENTITY-MIB for the Pseudo Wire T1/E1 Card.	column	ENTITY-MIBPhysicalIndex	`.1.3.6.1.4.1.2544.1.12.3.1.35.1.1`
pseudoWireE1T1CardStorageType The type of storage configured for this entry.	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.2544.1.12.3.1.35.1.10`
pseudoWireE1T1CardPSNEncapsulation This object specifies Packet Switched Network demultiplexing layer header type of the pseudo-wire packets.	column	PSNEncapsulationMode	`.1.3.6.1.4.1.2544.1.12.3.1.35.1.12`
pseudoWireE1T1CardAdminState Administrative State of the Pseudo Wire T1/E1 Card.	column	CM-COMMON-MIBAdminState	`.1.3.6.1.4.1.2544.1.12.3.1.35.1.2`
pseudoWireE1T1CardOperationalState Operational State of the Pseudo Wire T1/E1 Card.	column	CM-COMMON-MIBOperationalState	`.1.3.6.1.4.1.2544.1.12.3.1.35.1.3`
pseudoWireE1T1CardSecondaryState Secondary State of the Pseudo Wire T1/E1 Card.	column	CM-COMMON-MIBSecondaryState	`.1.3.6.1.4.1.2544.1.12.3.1.35.1.4`
pseudoWireE1T1CardIpAddress IP Address associated with the Pseudo Wire T1/E1 Card.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2544.1.12.3.1.35.1.5`
pseudoWireE1T1CardMode Card Mode of with the Pseudo Wire T1/E1 Card.	column	PWE3E1T1CardMode	`.1.3.6.1.4.1.2544.1.12.3.1.35.1.6`
pseudoWireE1T1CardVoltage Voltage of the Pseudo Wire T1/E1 Card.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2544.1.12.3.1.35.1.7`
pseudoWireE1T1CardTemperature Temperature of the Pseudo Wire T1/E1 Card.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2544.1.12.3.1.35.1.8`
pseudoWireE1T1CardRestartAction Allows to perform specified action on the Pseudo Wire T1/E1 card.	column	CM-COMMON-MIBRestartType	`.1.3.6.1.4.1.2544.1.12.3.1.35.1.9`