nemiRowStatus
CM-ENTITY-MIB ·
.1.3.6.1.4.1.2544.1.12.3.1.7.1.9
Object
The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of nemiRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
nemiRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The nemiRowStatus object may be modified if
the associated instance of this object is equal to active(1).
Context
- MIB
- CM-ENTITY-MIB
- OID
.1.3.6.1.4.1.2544.1.12.3.1.7.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nemiEntry
- Table
- nemiTable
- Siblings
- 12
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nemiEntityIndex Entity Index from ENTITY-MIB for the NEMI card. | column | ENTITY-MIBPhysicalIndex | .1.3.6.1.4.1.2544.1.12.3.1.7.1.1 |
| nemiForceOffLineAction On some condition, user wishes to make one card out of service
and hold the reset signal of the card via AMI. When force offline is enabled,
reset signal is held; When force off… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.3.1.7.1.10 |
| nemiFlashModelNum This provides the Flash Model Number on the NEMI card. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2544.1.12.3.1.7.1.11 |
| nemiFlashFirmwareRev This provides the Flash Firmware Revision on the NEMI card. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2544.1.12.3.1.7.1.12 |
| nemiFlashSerialNum This provides the Flash Serial Number on the NEMI card. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2544.1.12.3.1.7.1.13 |
| nemiAdminState Administrative State of the NEMI. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.3.1.7.1.2 |
| nemiOperationalState Operational State of the NEMI. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.3.1.7.1.3 |
| nemiSecondaryState Secondary State of the NEMI. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.3.1.7.1.4 |
| nemiVoltage Voltage of the NEMI. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.3.1.7.1.5 |
| nemiTemperature Temperature of the NEMI. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.3.1.7.1.6 |
| nemiRestartAction Allows to perform specified action on the NEMI card. | column | CM-COMMON-MIBRestartType | .1.3.6.1.4.1.2544.1.12.3.1.7.1.7 |
| nemiStorageType The type of storage configured for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2544.1.12.3.1.7.1.8 |