CISCO-WAN-BBIF-ILMI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
31

bbIfCnfSigILMIGrpTable

table
.1.3.6.1.4.1.351.110.5.2.6.1.2.1 · 1 row entry · 16 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk bbIfCnfSigILMIGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-BBIF-ILMI-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-BBIF-ILMI-MIB::bbIfCnfSigILMIGrpTable' 
This table contains ILMI configuration parameters
for a broadband interface.
bbIfCnfSigILMIGrpEntry row .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1
An entry for a boradband interface used as a UNI port.
Each entry contains ILMI configuration parameters and
variables for a broadband interface.
Indexes
Column Syntax OID
bbIfSigPortNum
This object refers to the broadband interface.
The value for this object is same as value specified
in bbIfNum object from bbIfCnfGrpTable.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.1
bbIfIlmiEnable
The logical interface is a generic entity, it can
be used as either a virtual trunk, or user port with
UNI support.

This variable is provided to enable/disable ILMI.

ILMI should only be …
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.2
bbIfSignallingProtocolType
This will set the signalling protocol
other(1) : other
noSignalling(2) : noSignalling
iLMI(3) : ILMI
Enumerationr/w
Enumerated Values:
1other
2noSignalling
3iLMI
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.3
bbIfSignallingVpi
This object specifies the VPI on which signalling
cells received.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.4
bbIfSignallingVci
This object specifies the VPI on which signalling
cells received.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.5
bbIfAddrPrefix
Network Prefix for the ATM address.
ATM-TC-MIBAtmIlmiNetworkPrefixr/w
Type Constraints:
range: 8
range: 13
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.6
bbIfCustomerId
This represents the customer Id.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.7
bbIfProtocolRevNo
This object represents the protocol revision number.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.8
bbIfIlmiTrapEnable
This object is used for enabling/disabling
the sending of ILMI traps.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.9
bbIfMinTrapInterval
This object specifies the minimum throttling
period of notification generation. The notificaton
events should be suppressed by the agent until the
current throttling period expires.
secondsInteger32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.10
bbIfKeepAlivePollingEnable
Enable/disable Keep Alive Polling.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.11
bbIfErrorThresholdN491
This object specifies Error Threshold (N491) value.
The number of keep alive polls that must fail within
a window of N491 polls, before the port is placed
in the failed state. This attribute is applicable only
when bbIf…
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.12
bbIfEventThresholdN492
This object specifies Error Threshold (N492) value.
The number of keep alive polls that must fail within
a window of N492 polls, before the port is placed
in the failed state. This attribute is applicable only
when bbIf…
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.13
bbIfPollingIntervalT491
This object specifies Polling Interval (T491) value.
The T491 value is the number of seconds between
each keep alive poll transmitted by port.
This attribute is applicable only
when bbIfSignallingProtocolType set to iLM…
secondsEnumerationr/w
Enumerated Values:
5v1
10v2
15v3
20v4
25v5
30v6
35v7
40v8
45v9
50v10
55v11
60v12
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.14
bbIfMinEnquiryIntervalT493
This object specifies minimum Enquiry Interval(T493)
value. The T493 value is the number of seconds between
each keep alive poll transmitted by port.
This attribute is applicable only when
bbIfSignallingProtocolType se…
Integer32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.15
bbIfAddrRegEnable
Enable/disable ILMI Address Registration.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.16

bbIfCntSigILMIGrpTable

table
.1.3.6.1.4.1.351.110.5.2.6.4.2.1 · 1 row entry · 15 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk bbIfCntSigILMIGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-BBIF-ILMI-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-BBIF-ILMI-MIB::bbIfCntSigILMIGrpTable' 
This table contains statistics related to
ILMI.
bbIfCntSigILMIGrpEntry row .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1
An entry for a boradband interface used as a UNI port.
Indexes
Column Syntax OID
sigCntBbIfNum
This object refers to the broadband interface.
The value for this object is same as value specified
in bbIfSigPortNum object from bbIfCnfSigILMIGrpTable.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.1
bbIfSnmpPduReceived
The number of snmp packets received on this
logical interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.2
bbIfGetRequestReceived
The number of get request messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.3
bbIfGetNextRequestReceived
The number of get-next messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.4
bbIfSetRequestReceived
The number of set messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.5
bbIfTrapReceived
The number of traps received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.6
bbIfGetResponseReceived
The number of Keep Alive response messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.7
bbIfGetResponseTransmitted
The number of response messages transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.8
bbIfGetRequestTransmitted
The number of Keep Alive get request messages transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.9
bbIfTrapTransmitted
The number of trap messages transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.10
bbIfInvalidPDUReceived
The number of invalid PDUs received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.11
bbIfAsn1ParseError
The number of parse errors on ASN.1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.12
bbIfNoSuchNameError
The number of errors for name not present.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.13
bbIfTooBigError
The number of messages received with len > 484.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.14
bbIfSigCntClrButton
Writing a value of 2 resets all the counters
from bbIfCntSigILMIGrpTable.
Enumerationr/w
Enumerated Values:
1noAction
2resetCounters
 .1.3.6.1.4.1.351.110.5.2.6.4.2.1.1.15