bbIfPollingIntervalT491
CISCO-WAN-BBIF-ILMI-MIB ·
.1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.14
Object
column
r/w
seconds Enumeration
This object specifies Polling Interval (T491) value. The T491 value is the number of seconds between each keep alive poll transmitted by port. This attribute is applicable only when bbIfSignallingProtocolType set to iLMI(3).
Context
- MIB
- CISCO-WAN-BBIF-ILMI-MIB
- OID
.1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- bbIfCnfSigILMIGrpEntry
- Table
- bbIfCnfSigILMIGrpTable
- Siblings
- 15
Syntax
seconds Enumeration
Values & Constraints
Enumerated Values
5 | v1 |
10 | v2 |
15 | v3 |
20 | v4 |
25 | v5 |
30 | v6 |
35 | v7 |
40 | v8 |
45 | v9 |
50 | v10 |
55 | v11 |
60 | v12 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bbIfSigPortNum This object refers to the broadband interface.
The value for this object is same as value specified
in bbIfNum object from bbIfCnfGrpTable. | column | Integer32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.1 |
| bbIfMinTrapInterval This object specifies the minimum throttling
period of notification generation. The notificaton
events should be suppressed by the agent until the
current throttling period expire… | column | seconds Integer32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.10 |
| bbIfKeepAlivePollingEnable Enable/disable Keep Alive Polling. | column | Enumeration | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.11 |
| bbIfErrorThresholdN491 This object specifies Error Threshold (N491) value.
The number of keep alive polls that must fail within
a window of N491 polls, before the port is placed
in the failed state. Thi… | column | Integer32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.12 |
| bbIfEventThresholdN492 This object specifies Error Threshold (N492) value.
The number of keep alive polls that must fail within
a window of N492 polls, before the port is placed
in the failed state. Thi… | column | Integer32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.13 |
| bbIfMinEnquiryIntervalT493 This object specifies minimum Enquiry Interval(T493)
value. The T493 value is the number of seconds between
each keep alive poll transmitted by port.
This attribute is applicable … | column | Integer32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.15 |
| bbIfAddrRegEnable Enable/disable ILMI Address Registration. | column | Enumeration | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.16 |
| bbIfIlmiEnable The logical interface is a generic entity, it can
be used as either a virtual trunk, or user port with
UNI support.
This variable is provided to enable/disable I… | column | Enumeration | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.2 |
| bbIfSignallingProtocolType This will set the signalling protocol
other(1) : other
noSignalling(2) : noSignalling
iLMI(3) : ILMI | column | Enumeration | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.3 |
| bbIfSignallingVpi This object specifies the VPI on which signalling
cells received. | column | Integer32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.4 |
| bbIfSignallingVci This object specifies the VPI on which signalling
cells received. | column | Integer32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.5 |
| bbIfAddrPrefix Network Prefix for the ATM address. | column | ATM-TC-MIBAtmIlmiNetworkPrefix | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.6 |
| bbIfCustomerId This represents the customer Id. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.7 |
| bbIfProtocolRevNo This object represents the protocol revision number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.8 |
| bbIfIlmiTrapEnable This object is used for enabling/disabling
the sending of ILMI traps. | column | Enumeration | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.9 |