bbIfSignallingVci
CISCO-WAN-BBIF-ILMI-MIB ·
.1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.5
Object
column
r/w
Integer32
This object specifies the VPI on which signalling cells received.
Context
- MIB
- CISCO-WAN-BBIF-ILMI-MIB
- OID
.1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- bbIfCnfSigILMIGrpEntry
- Table
- bbIfCnfSigILMIGrpTable
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bbIfSigPortNum This object refers to the broadband interface.
The value for this object is same as value specified
in bbIfNum object from bbIfCnfGrpTable. | column | Integer32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.1 |
| bbIfMinTrapInterval This object specifies the minimum throttling
period of notification generation. The notificaton
events should be suppressed by the agent until the
current throttling period expire… | column | seconds Integer32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.10 |
| bbIfKeepAlivePollingEnable Enable/disable Keep Alive Polling. | column | Enumeration | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.11 |
| bbIfErrorThresholdN491 This object specifies Error Threshold (N491) value.
The number of keep alive polls that must fail within
a window of N491 polls, before the port is placed
in the failed state. Thi… | column | Integer32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.12 |
| bbIfEventThresholdN492 This object specifies Error Threshold (N492) value.
The number of keep alive polls that must fail within
a window of N492 polls, before the port is placed
in the failed state. Thi… | column | Integer32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.13 |
| bbIfPollingIntervalT491 This object specifies Polling Interval (T491) value.
The T491 value is the number of seconds between
each keep alive poll transmitted by port.
This attribute is applicable only
wh… | column | seconds Enumeration | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.14 |
| bbIfMinEnquiryIntervalT493 This object specifies minimum Enquiry Interval(T493)
value. The T493 value is the number of seconds between
each keep alive poll transmitted by port.
This attribute is applicable … | column | Integer32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.15 |
| bbIfAddrRegEnable Enable/disable ILMI Address Registration. | column | Enumeration | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.16 |
| bbIfIlmiEnable The logical interface is a generic entity, it can
be used as either a virtual trunk, or user port with
UNI support.
This variable is provided to enable/disable I… | column | Enumeration | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.2 |
| bbIfSignallingProtocolType This will set the signalling protocol
other(1) : other
noSignalling(2) : noSignalling
iLMI(3) : ILMI | column | Enumeration | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.3 |
| bbIfSignallingVpi This object specifies the VPI on which signalling
cells received. | column | Integer32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.4 |
| bbIfAddrPrefix Network Prefix for the ATM address. | column | ATM-TC-MIBAtmIlmiNetworkPrefix | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.6 |
| bbIfCustomerId This represents the customer Id. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.7 |
| bbIfProtocolRevNo This object represents the protocol revision number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.8 |
| bbIfIlmiTrapEnable This object is used for enabling/disabling
the sending of ILMI traps. | column | Enumeration | .1.3.6.1.4.1.351.110.5.2.6.1.2.1.1.9 |