CISCO-SWITCH-HARDWARE-CAPACITY-MIB Table View

This table contains MAC table capacity for each
switching engine, as specified by entPhysicalIndex in
ENTITY-MIB, capable of providing this information.

cshcMacUsageEntry row .1.3.6.1.4.1.9.9.663.1.1.1.1.1

Each row contains management information for MAC
table hardware capacity on a switching engine.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cshcMacCollisions This object indicates the number of Ethernet frames whose source MAC address the switching engine failed to learn while constructing its MAC table.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.1.1.1.1
cshcMacUsed This object indicates the number of MAC table entries that are currently in use for this switching engine.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.1.1.1.2
cshcMacTotal This object indicates the total number of MAC table entries available for this switching engine.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.1.1.1.3
cshcMacMcast This object indicates the total number of multicast MAC table entries on this switching engine.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.1.1.1.4
cshcMacUcast This object indicates the total number of unicast MAC table entries on this switching engine.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.1.1.1.5
cshcMacLines This object indicates the total number of MAC table lines on this switching engine. The MAC table is organized as multiple MAC entries per line.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.1.1.1.6
cshcMacLinesFull This object indicates the total number of MAC table lines full on this switching engine. A line full means all the MAC entries on the line are occupied.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.1.1.1.7

This table contains VPN CAM capacity for each
entity, as specified by entPhysicalIndex in
ENTITY-MIB, capable of providing this information.

cshcVpnCamUsageEntry row .1.3.6.1.4.1.9.9.663.1.1.1.2.1

Each row contains management information for VPN CAM
hardware capacity on an entity.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cshcVpnCamUsed This object indicates the number of VPN CAM entries that are currently in use.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.1.2.1.1
cshcVpnCamTotal This object indicates the total number of VPN CAM entries.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.1.2.1.2

This table contains FIB TCAM capacity for each
entity, as specified by entPhysicalIndex in 
ENTITY-MIB, capable of providing this information.

cshcFibTcamUsageEntry row .1.3.6.1.4.1.9.9.663.1.1.2.1.1

Each row contains management information for FIB TCAM
hardware capacity on an entity.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cshc72bitsFibTcamUsed This object indicates the number of 72 bits FIB TCAM entries that are currently in use.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.1.1.1
cshc72bitsFibTcamTotal This object indicates the total number of 72 bits FIB TCAM entries available.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.1.1.2
cshc144bitsFibTcamUsed This object indicates the number of 144 bits FIB TCAM entries that are currently in use.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.1.1.3
cshc144bitsFibTcamTotal This object indicates the total number of 144 bits FIB TCAM entries available.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.1.1.4
cshc288bitsFibTcamUsed This object indicates the number of 288 bits FIB TCAM entries that are currently in use.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.1.1.5
cshc288bitsFibTcamTotal This object indicates the total number of 288 bits FIB TCAM entries available.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.1.1.6

This table contains FIB TCAM usage per specified
Layer 3 protocol on an entity capable of providing
this information.

cshcProtocolFibTcamUsageEntry row .1.3.6.1.4.1.9.9.663.1.1.2.2.1

Each row contains management information for FIB TCAM
usage for the specific Layer 3 protocol on an entity as
specified by the entPhysicalIndex in ENTITY-MIB.

Indexes

ENTITY-MIBentPhysicalIndex cshcProtocolFibTcamProtocol

Column	Syntax	OID
cshcProtocolFibTcamProtocol This object indicates the Layer 3 protocol utilizing FIB TCAM resource. 'ipv4' - indicates Internet Protocol version 4. 'mpls' - indicates Multiprotocol Label Switching. 'eom' …	Enumeration Enumerated Values: 1 ipv4 2 mpls 3 eom 4 ipv6 5 ipv4Multicast 6 ipv6Multicast 7 l2VpnPeer 8 l2VpnIpv4Multicast 9 l2VpnIpv6Multicast 10 fcoe 11 mplsVpn 12 fcMpls 13 ipv6LocalLink 14 allProtocols	.1.3.6.1.4.1.9.9.663.1.1.2.2.1.1
cshcProtocolFibTcamUsed This object indicates the number of FIB TCAM entries that are currently in use for the protocol denoted by cshcProtocolFibTcamProtocol.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.2.1.2
cshcProtocolFibTcamTotal This object indicates the total number of FIB TCAM entries are currently allocated for the protocol denoted by cshcProtocolFibTcamProtocol. A value of zero indicates that the total number of FIB TCAM for …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.2.1.3
cshcProtocolFibTcamLogicalUsed This object indicates the number of logical FIB TCAM entries that are currently in use for the protocol denoted by cshcProtocolFibTcamProtocol.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.2.1.4
cshcProtocolFibTcamLogicalTotal This object indicates the total number of logical FIB TCAM entries that are currently allocated for the protocol denoted by cshcProtocolFibTcamProtocol. A value of zero indicates that the total number of …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.2.1.5
cshcProtocolFibTcamWidthType This object indicates the entry width type for the protocol denoted by cshcProtocolFibTcamProtocol. 'singleWidth' - indicates each logical entry is using one physical entry.…	Enumeration Enumerated Values: 1 singleWidth 2 doubleWidth 3 quadWidth	.1.3.6.1.4.1.9.9.663.1.1.2.2.1.6

This table contains adjacency capacity for each
entity capable of providing this information.

cshcAdjacencyUsageEntry row .1.3.6.1.4.1.9.9.663.1.1.2.3.1

Each row contains management information for adjacency
hardware capacity on an entity, as specified by
entPhysicalIndex in ENTITY-MIB.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cshcAdjacencyUsed This object indicates the number of adjacency entries that are currently in use.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.3.1.1
cshcAdjacencyTotal This object indicates the total number of adjacency entries available.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.3.1.2

This table contains Layer 3 forwarding load information
for each switching engine capable of providing this
information.

cshcForwardingLoadEntry row .1.3.6.1.4.1.9.9.663.1.1.2.4.1

Each row contains management information of Layer 3
forwarding load on a switching engine, as specified
by entPhysicalIndex in ENTITY-MIB.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cshcForwardingLoadPktRate This object indicates the forwarding rate of Layer 3 packets.	ppsHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.663.1.1.2.4.1.1
cshcForwardingLoadPktPeakRate This object indicates the peak forwarding rate of Layer 3 packets.	ppsHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.663.1.1.2.4.1.2
cshcForwardingLoadPktPeakTime This object describes the time when the peak forwarding rate of Layer 3 packets denoted by cshcForwardingLoadPktPeakRate occurs. This object will contain 0-1-1,00:00:00.0 if the peak time information is n…	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.663.1.1.2.4.1.3

This table contains adjacency capacity per resource type
and its usage for each entity capable of providing this  
information.

cshcAdjacencyResourceUsageEntry row .1.3.6.1.4.1.9.9.663.1.1.2.5.1

Each row contains the management information for a particular
adjacency resource and switch engine, as specified by
entPhysicalIndex in ENTITY-MIB.

Indexes

ENTITY-MIBentPhysicalIndex cshcAdjacencyResourceIndex

Column	Syntax	OID
cshcAdjacencyResourceIndex This object indicates a unique value that identifies an adjacency resource.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.5.1.1
cshcAdjacencyResourceDescr This object indicates a description of the adjacency resource.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.663.1.1.2.5.1.2
cshcAdjacencyResourceUsed This object indicates the number of adjacency entries that are currently in use.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.5.1.3
cshcAdjacencyResourceTotal This object indicates the total number of adjacency entries available.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.5.1.4

This table contains information regarding Multicast Expansion
Table (MET) resource usage and utilization for a switching
engine capable of providing this information.

cshcMetResourceUsageEntry row .1.3.6.1.4.1.9.9.663.1.1.2.6.1

Each row contains information of the usage and
utilization for a particular MET resource and
switching engine, as specified by entPhysicalIndex
in ENTITY-MIB.

Indexes

ENTITY-MIBentPhysicalIndex cshcMetResourceIndex

Column	Syntax	OID
cshcMetResourceIndex An arbitrary positive integer value that uniquely identifies a Met resource.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.6.1.1
cshcMetResourceDescr This object indicates a description of the MET resource.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.663.1.1.2.6.1.2
cshcMetResourceUsed This object indicates the number of MET entries used by this MET resource.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.6.1.3
cshcMetResourceTotal This object indicates the total number of MET entries available for this MET resource.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.6.1.4
cshcMetResourceMcastGrp This object indicates the number of the multicast group for this MET resource. A value of -1 indicates that this object is not applicable on this MET feature.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.9.9.663.1.1.2.6.1.5

This table contains information regarding forwarding 
resource for each entity capable of providing this
information.

cshcForwardingResourceEntry row .1.3.6.1.4.1.9.9.663.1.1.2.7.1

Each row contains information for a particular forwarding
table resource on an entity, as specified by entPhysicalIndex
in ENTITY-MIB.

Indexes

ENTITY-MIBentPhysicalIndex cshcForwardingResourceIndex

Column	Syntax	OID
cshcForwardingResourceIndex An arbitrary positive integer value that uniquely identifies a forwarding table resource.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.663.1.1.2.7.1.1
cshcForwardingResourceDescr This object indicates the description of a forwarding table resource.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.663.1.1.2.7.1.2
cshcForwardingResourceValue This object indicates the value of a forwarding table resource.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.1.2.7.1.3

This table contains interface drops information on each
module capable of providing this information.

cshcModuleInterfaceDropsEntry row .1.3.6.1.4.1.9.9.663.1.2.1.1

Each row contains management information for dropped traffic
on a specific module, identified by the entPhysicalIndex
in ENTITY-MIB, and capable of providing this information.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cshcModTxTotalDroppedPackets This object indicates the total dropped outbound packets on all physical interfaces of this module.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.663.1.2.1.1.1
cshcModRxTotalDroppedPackets This object indicates the total dropped inbound packets on all physical interfaces of this module.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.663.1.2.1.1.2
cshcModTxTopDropPort This object indicates the ifIndex value of the interface that has the largest number of total dropped outbound packets among all the physical interfaces on this module. If there were no dropped outbound p…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.663.1.2.1.1.3
cshcModRxTopDropPort This object indicates the ifIndex value of the interface that has the largest number of total dropped inbound packets among all the physical interfaces of this module. If there were no dropped inbound pac…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.663.1.2.1.1.4
cshcModTxTopDropIfIndexList This object indicates the ifIndex values of the list of interfaces that have the largest number of total dropped outbound packets among all the physical interfaces of this module.	CISCO-TCCiscoInterfaceIndexList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.663.1.2.1.1.5
cshcModRxTopDropIfIndexList This object indicates the ifIndex values of the list of interfaces that have the largest number of total dropped inbound packets among all the physical interfaces of this module.	CISCO-TCCiscoInterfaceIndexList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.663.1.2.1.1.6

This table contains buffer capacity information for each
physical interface capable of providing this information.

cshcInterfaceBufferEntry row .1.3.6.1.4.1.9.9.663.1.2.2.1

Each row contains buffer capacity information for a
specific physical interface capable of providing this
information.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cshcInterfaceTransmitBufferSize The aggregate buffer size of all the transmit queues on this interface.	bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.2.2.1.1
cshcInterfaceReceiveBufferSize The aggregate buffer size of all the receive queues on this interface.	bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.2.2.1.2

This table contains information for each internal channel
interface on each physical entity, such as a module, 
capable of providing this information.

cshcInternalChannelEntry row .1.3.6.1.4.1.9.9.663.1.2.3.1

Each row contains management information for an internal
channel interface of a specific type on a specific physical
entity, such as a module, identified by the entPhysicalIndex
in ENTITY-MIB, and capable of providing t…

Indexes

ENTITY-MIBentPhysicalIndex cshcIntlChnlType

Column	Syntax	OID
cshcIntlChnlType The type of this internal channel.	CshcInternalChannelType Type Values: 1 eobc 2 ibc	.1.3.6.1.4.1.9.9.663.1.2.3.1.1
cshcIntlChnlRxPacketRate Five minute exponentially-decayed moving average of inbound packet rate for this channel.	packets per secondHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.663.1.2.3.1.2
cshcIntlChnlRxTotalPackets The total number of the inbound packets accounted for this channel.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.663.1.2.3.1.3
cshcIntlChnlRxDroppedPackets The number of dropped inbound packets for this channel.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.663.1.2.3.1.4
cshcIntlChnlTxPacketRate Five minute exponentially-decayed moving average of outbound packet rate for this channel.	packets per secondHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.663.1.2.3.1.5
cshcIntlChnlTxTotalPackets The total number of the outbound packets accounted for this channel.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.663.1.2.3.1.6
cshcIntlChnlTxDroppedPackets The number of dropped outbound packets for this channel.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.663.1.2.3.1.7

This table contains information regarding
CPU rate limiters resources.

cshcCPURateLimiterResourcesEntry row .1.3.6.1.4.1.9.9.663.1.3.1.1

Each row contains management information of CPU rate
limiter resources for a managed network layer.

Indexes

cshcCPURateLimiterNetworkLayer

Column	Syntax	OID
cshcCPURateLimiterNetworkLayer This object indicates the network layer for which the CPU rate limiters are applied. 'layer2' - Layer 2. 'layer3' - Layer 3. 'layer2Input' - Ingress Layer 2. Applicable for d…	Enumeration Enumerated Values: 1 layer2 2 layer3 3 layer2Input 4 layer2Output	.1.3.6.1.4.1.9.9.663.1.3.1.1.1
cshcCPURateLimiterTotal This object indicates the total number of CPU rate limiters avaiable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.3.1.1.2
cshcCPURateLimiterUsed This object indicates the number of CPU rate limiters that is currently in use.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.3.1.1.3
cshcCPURateLimiterReserved This object indicates the number of CPU rate limiters which is reserved by the switching device.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.3.1.1.4

This table contains information regarding ICAM (Internal
Content Addressable Memory) Resource usage and utilization
for a switching engine capable of providing this
information.

cshcIcamUtilizationEntry row .1.3.6.1.4.1.9.9.663.1.4.1.1

Each row contains management information of ICAM
usage and utilization for a switching engine, as specified
as specified by entPhysicalIndex in ENTITY-MIB.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cshcIcamCreated This object indicates the total number of ICAM entries created.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.4.1.1.1
cshcIcamFailed This object indicates the number of ICAM entries which failed to be created.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.4.1.1.2
cshcIcamUtilization This object indicates the ICAM utlization in percentage in this switching engine.	CISCO-QOS-PIB-MIBPercent Type Constraints: range: 0..100	.1.3.6.1.4.1.9.9.663.1.4.1.1.3

This table contains information regarding Netflow flow mask
features supported.

cshcNetflowFlowMaskEntry row .1.3.6.1.4.1.9.9.663.1.5.1.1

Each row contains supported feature information of
a Netflow flow mask supported by the device.

Indexes

cshcNetflowFlowMaskAddrType cshcNetflowFlowMaskIndex

Column	Syntax	OID
cshcNetflowFlowMaskAddrType This object indicates Internet address type for this flow mask.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.663.1.5.1.1.1
cshcNetflowFlowMaskIndex This object indicates the unique flow mask number for a specific Internet address type.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.5.1.1.2
cshcNetflowFlowMaskType This object indicates the type of flow mask.	Enumeration Enumerated Values: 1 null 2 srcOnly 3 destOnly 4 srcDest 5 interfaceSrcDest 6 fullFlow 7 interfaceFullFlow 8 interfaceFullFlowOrFullFlow 9 atleastInterfaceSrcDest 10 atleastFullFlow 11 atleastInterfaceFullFlow 12 atleastSrc 13 atleastDst 14 atleastSrcDst 15 shortest 16 lessThanFullFlow 17 exceptFullFlow 18 exceptInterfaceFullFlow 19 interfaceDest 20 atleastInterfaceDest 21 interfaceSrc 22 atleastInterfaceSrc 23 srcOnlyCR 24 dstOnlyCR 25 fullFlowCR 26 interfaceFullFlowCR 27 max 28 conflict 29 err 30 unused 31 fullFlow1 32 fullFlow2 33 fullFlow3 34 vlanFullFlow1 35 vlanFullFlow2 36 vlanFullFlow3 37 reserved	.1.3.6.1.4.1.9.9.663.1.5.1.1.3
cshcNetflowFlowMaskFeature This object indicates the features supported by this flow mask.	Bits Enumerated Values: 0 null 1 ipAcgIngress 2 ipAcgEgress 3 natIngress 4 natEngress 5 natInside 6 pbr 7 cryptoIngress 8 cryptoEgress 9 qos 10 idsIngress 11 tcpIntrcptEgress 12 guardian 13 ipv6AcgIngress 14 ipv6AcgEgress 15 mcastAcgIngress 16 mcastAcgEgress 17 mcastStub 18 mcastUrd 19 ipDsIngress 20 ipDsEgress 21 ipVaclIngress 22 ipVaclEgress 23 macVaclIngress 24 macVaclEgress 25 inspIngress 26 inspEgress 27 authProxy 28 rpf 29 wccpIngress 30 wccpEgress 31 inspDummyIngress 32 inspDummyEgress 33 nbarIngress 34 nbarEgress 35 ipv6Rpf 36 ipv6GlobalDefault 37 dai 38 ipPaclIngress 39 macPaclIngress 40 mplsIcmpBridge 41 ipSlb 42 ipv4Default 43 ipv6Default 44 mplsDefault 45 erSpanTermination 46 ipv6Mcast 47 ipDsL3Ingress 48 ipDsL3Egress 49 cryptoRedirectIngress 50 otherDefault 51 ipRecir 52 iPAdmissionL3Eou 53 iPAdmissionL2Eou 54 iPAdmissionL2EouArp 55 ipAdmissionL2Http 56 ipAdmissionL2HttpArp 57 ipv4L3IntfNde 58 ipv4L2IntfNde 59 ipSguardIngress 60 pvtHostsIngress 61 vrfNatIngress 62 tcpAdjustMssIngress 63 tcpAdjustMssEgress 64 eomIw 65 eomIw2 66 ipv4VrfNdeEgress 67 l1Egress 68 l1Ingress 69 l1GlobalEgress 70 l1GlobalIngress 71 ipDot1xAcl 72 ipDot1xAclArp 73 dot1ad 74 ipSpanPcap 75 ipv6CryptoRedirectIngress 76 svcAcclrtIngress 77 ipv6SvcAcclrtIngress 78 nfAggregation 79 nfSampling 80 ipv6Guardian 81 ipv6Qos 82 none	.1.3.6.1.4.1.9.9.663.1.5.1.1.4

This table contains information regarding Netflow resource
usage and utilization for a switching engine capable of 
providing this information.

cshcNetflowResourceUsageEntry row .1.3.6.1.4.1.9.9.663.1.6.1.1

Each row contains information of the usage and
utilization for a particular Netflow resource and
switching engine, as specified by entPhysicalIndex
in ENTITY-MIB.

Indexes

ENTITY-MIBentPhysicalIndex cshcNetflowResourceUsageIndex

Column	Syntax	OID
cshcNetflowResourceUsageIndex An arbitrary positive integer value that uniquely identifies a Netflow resource.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.663.1.6.1.1.1
cshcNetflowResourceUsageDescr This object indicates a description of the Netflow resource.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.663.1.6.1.1.2
cshcNetflowResourceUsageUtil This object indicates the Netflow resource usage in percentage value.	CISCO-QOS-PIB-MIBPercent Type Constraints: range: 0..100	.1.3.6.1.4.1.9.9.663.1.6.1.1.3
cshcNetflowResourceUsageUsed This object indicates the number of Netflow entries used by this Netflow resource.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.6.1.1.4
cshcNetflowResourceUsageFree This object indicates the number of Netflow entries available for this Netflow resource.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.6.1.1.5
cshcNetflowResourceUsageFail This object indicates the number of Netflow entries which were failed to be created for this Netflow resource. A value of -1 indicates that this resource does not maintain this counter.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.9.9.663.1.6.1.1.6

This table contains QoS capacity per resource type
and its usage for each entity capable of providing this    
information.

cshcQosResourceUsageEntry row .1.3.6.1.4.1.9.9.663.1.7.1.1

Each row contains management information for QoS
capacity and its usage on an entity, as specified by
entPhysicalIndex in ENTITY-MIB.

Indexes

ENTITY-MIBentPhysicalIndex cshcQosResourceType

Column	Syntax	OID
cshcQosResourceType This object indicates the QoS resource type.	Enumeration Enumerated Values: 1 aggregatePolicers 2 distributedPolicers 3 policerProfiles	.1.3.6.1.4.1.9.9.663.1.7.1.1.1
cshcQosResourceUsed This object indicates the number of QoS entries that are currently in use.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.7.1.1.2
cshcQosResourceTotal This object indicates the total number of QoS entries available.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.663.1.7.1.1.3