CISCO-SWITCH-HARDWARE-CAPACITY-MIB
This MIB module defines the managed objects for hardware
capacity of Cisco switching devices. The hardware
capacity information covers the following but not limited
to features: forwarding, rate-limiter ...
The following terms are used throughout the MIB:
CAM: Content Addressable Memory.
TCAM: Ternary Content Addressable Memory.
FIB: Forwarding Information Base.
VPN: Virtual Private Network.
QoS: Quality of Service.
CPU rate-limiter: Mechanism to rate-limit or restrict
undesired traffic to the CPU.
MPLS: Multiprotocol Label Switching.
- Source file
CISCO-SWITCH-HARDWARE-CAPACITY-MIB- Last revised
- Identity
ciscoSwitchHardwareCapacityMIB- Base OID
1.3.6.1.4.1.9.9.663
Imported Objects
| CISCO-QOS-PIB-MIB | Percent |
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CiscoInterfaceIndexList |
| ENTITY-MIB | entPhysicalIndex |
| HCNUM-TC | CounterBasedGauge64 |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION (no object page) |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-SWITCH-HARDWARE-CAPACITY-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-SWITCH-HARDWARE-CAPACITY-MIB::ciscoSwitchHardwareCapacityMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SWITCH-HARDWARE-CAPACITY-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SWITCH-HARDWARE-CAPACITY-MIB::ciscoSwitchHardwareCapacityMIB'
Objects (122)
Showing 122 of 122 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.663 |
||
.1.3.6.1.4.1.9.9.663.0 |
||
.1.3.6.1.4.1.9.9.663.1 |
||
.1.3.6.1.4.1.9.9.663.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.1.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.1.1.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.1.1.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.1.1.1.1.3 |
||
.1.3.6.1.4.1.9.9.663.1.1.1.1.1.4 |
||
.1.3.6.1.4.1.9.9.663.1.1.1.1.1.5 |
||
.1.3.6.1.4.1.9.9.663.1.1.1.1.1.6 |
||
.1.3.6.1.4.1.9.9.663.1.1.1.1.1.7 |
||
.1.3.6.1.4.1.9.9.663.1.1.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.1.1.2.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.1.2.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.1.2.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.1.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.1.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.1.1.3 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.1.1.4 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.1.1.5 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.1.1.6 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.2 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.2.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.663.1.1.2.2.1.1 |
|
.1.3.6.1.4.1.9.9.663.1.1.2.2.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.2.1.3 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.2.1.4 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.2.1.5 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.663.1.1.2.2.1.6 |
|
.1.3.6.1.4.1.9.9.663.1.1.2.3 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.3.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.3.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.3.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.4 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.4.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.4.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.4.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.4.1.3 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.5 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.5.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.5.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.5.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.5.1.3 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.5.1.4 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.6 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.6.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.6.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.6.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.6.1.3 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.6.1.4 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.663.1.1.2.6.1.5 |
|
.1.3.6.1.4.1.9.9.663.1.1.2.7 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.7.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.663.1.1.2.7.1.1 |
|
.1.3.6.1.4.1.9.9.663.1.1.2.7.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.1.2.7.1.3 |
||
.1.3.6.1.4.1.9.9.663.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.2.1 |
||
.1.3.6.1.4.1.9.9.663.1.2.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.2.1.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.2.1.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.2.1.1.3 |
||
.1.3.6.1.4.1.9.9.663.1.2.1.1.4 |
||
.1.3.6.1.4.1.9.9.663.1.2.1.1.5 |
||
.1.3.6.1.4.1.9.9.663.1.2.1.1.6 |
||
.1.3.6.1.4.1.9.9.663.1.2.2 |
||
.1.3.6.1.4.1.9.9.663.1.2.2.1 |
||
|
bytesSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.9.9.663.1.2.2.1.1 |
|
|
bytesSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.9.9.663.1.2.2.1.2 |
|
.1.3.6.1.4.1.9.9.663.1.2.3 |
||
.1.3.6.1.4.1.9.9.663.1.2.3.1 |
||
.1.3.6.1.4.1.9.9.663.1.2.3.1.1 |
||
|
packets per secondHCNUM-TCCounterBasedGauge64
|
.1.3.6.1.4.1.9.9.663.1.2.3.1.2 |
|
.1.3.6.1.4.1.9.9.663.1.2.3.1.3 |
||
.1.3.6.1.4.1.9.9.663.1.2.3.1.4 |
||
|
packets per secondHCNUM-TCCounterBasedGauge64
|
.1.3.6.1.4.1.9.9.663.1.2.3.1.5 |
|
.1.3.6.1.4.1.9.9.663.1.2.3.1.6 |
||
.1.3.6.1.4.1.9.9.663.1.2.3.1.7 |
||
.1.3.6.1.4.1.9.9.663.1.3 |
||
.1.3.6.1.4.1.9.9.663.1.3.1 |
||
.1.3.6.1.4.1.9.9.663.1.3.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.663.1.3.1.1.1 |
|
.1.3.6.1.4.1.9.9.663.1.3.1.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.3.1.1.3 |
||
.1.3.6.1.4.1.9.9.663.1.3.1.1.4 |
||
.1.3.6.1.4.1.9.9.663.1.4 |
||
.1.3.6.1.4.1.9.9.663.1.4.1 |
||
.1.3.6.1.4.1.9.9.663.1.4.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.4.1.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.4.1.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.4.1.1.3 |
||
.1.3.6.1.4.1.9.9.663.1.5 |
||
.1.3.6.1.4.1.9.9.663.1.5.1 |
||
.1.3.6.1.4.1.9.9.663.1.5.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.5.1.1.1 |
||
.1.3.6.1.4.1.9.9.663.1.5.1.1.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.663.1.5.1.1.3 |
|
|
Bits
|
.1.3.6.1.4.1.9.9.663.1.5.1.1.4 |
|
.1.3.6.1.4.1.9.9.663.1.6 |
||
.1.3.6.1.4.1.9.9.663.1.6.1 |
||
.1.3.6.1.4.1.9.9.663.1.6.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.663.1.6.1.1.1 |
|
.1.3.6.1.4.1.9.9.663.1.6.1.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.6.1.1.3 |
||
.1.3.6.1.4.1.9.9.663.1.6.1.1.4 |
||
.1.3.6.1.4.1.9.9.663.1.6.1.1.5 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.663.1.6.1.1.6 |
|
.1.3.6.1.4.1.9.9.663.1.7 |
||
.1.3.6.1.4.1.9.9.663.1.7.1 |
||
.1.3.6.1.4.1.9.9.663.1.7.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.663.1.7.1.1.1 |
|
.1.3.6.1.4.1.9.9.663.1.7.1.1.2 |
||
.1.3.6.1.4.1.9.9.663.1.7.1.1.3 |
||
.1.3.6.1.4.1.9.9.663.2 |
||
.1.3.6.1.4.1.9.9.663.2.1 |
||
.1.3.6.1.4.1.9.9.663.2.2 |
Dependencies (15) 11 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- CISCO-QOS-PIB-MIBcisco
- CISCO-TCcisco
- IANA-ENTITY-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- UUID-TC-MIBrfc
- ENTITY-MIBrfc
- HCNUM-TCrfc
- IANAifType-MIBrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- CISCO-SWITCH-HARDWARE-CAPACITY-MIBciscoselected
Type Definitions (1)
| Enumeration |
eobc(1)ibc(2) |
Conformance Groups (22)
|
A collection of objects which provides Layer 2
forwarding hardware capacity information in the device. |
.1.3.6.1.4.1.9.9.663.2.2.1
|
|
|
A collection of objects which provides VPN CAM
hardware capacity information in the device. |
.1.3.6.1.4.1.9.9.663.2.2.2
|
|
|
A collection of objects which provides FIB TCAM
hardware capacity information in the device. |
.1.3.6.1.4.1.9.9.663.2.2.3
|
|
|
A collection of objects which provides FIB TCAM
hardware capacity information in conjunction with Layer 3 protocol in the device. |
.1.3.6.1.4.1.9.9.663.2.2.4
|
|
|
A collection of objects which provides adjacency
hardware capacity information in the device. |
.1.3.6.1.4.1.9.9.663.2.2.5
|
|
|
A collection of objects which provides forwarding
load information in the device. |
.1.3.6.1.4.1.9.9.663.2.2.6
|
|
|
A collection of objects which provides linecard
drop traffic information on the device. |
.1.3.6.1.4.1.9.9.663.2.2.7
|
|
|
A collection of objects which provides interface
buffer information on the device. |
.1.3.6.1.4.1.9.9.663.2.2.8
|
|
|
cshcIntlChnlRxPacketRate cshcIntlChnlRxTotalPackets cshcIntlChnlRxDroppedPackets cshcIntlChnlTxPacketRate cshcIntlChnlTxTotalPackets cshcIntlChnlTxDroppedPackets
A collection of objects which provides internal
channel information on the device. |
.1.3.6.1.4.1.9.9.663.2.2.9
|
|
|
A collection of objects which provides CPU rate limiter
resource in the device. |
.1.3.6.1.4.1.9.9.663.2.2.10
|
|
|
A collection of objects which provides ICAM resources
information in the device. |
.1.3.6.1.4.1.9.9.663.2.2.11
|
|
|
A collection of objects which provides Netflow FlowMask
information in the device. |
.1.3.6.1.4.1.9.9.663.2.2.12
|
|
|
A collection of objects which provides additional FIB TCAM
hardware capacity information in the device. |
.1.3.6.1.4.1.9.9.663.2.2.13
|
|
|
cshcNetflowResourceUsageDescr cshcNetflowResourceUsageUtil cshcNetflowResourceUsageUsed cshcNetflowResourceUsageFree cshcNetflowResourceUsageFail
A collection of objects which provides Netflow resource
usage information in the device. |
.1.3.6.1.4.1.9.9.663.2.2.14
|
|
|
A collection of objects which provides additional Layer 2
forwarding hardware capacity information in the device. |
.1.3.6.1.4.1.9.9.663.2.2.15
|
|
|
A collection of objects which provides additional FIB TCAM
hardware capacity information in conjunction with Layer 3 protocol in the device. |
.1.3.6.1.4.1.9.9.663.2.2.16
|
|
|
A collection of objects which provides adjacency
hardware capacity information per resource in the device. |
.1.3.6.1.4.1.9.9.663.2.2.17
|
|
|
A collection of objects which provides QoS
hardware capacity information per resource in the device. |
.1.3.6.1.4.1.9.9.663.2.2.18
|
|
|
A collection of objects which provides information on
multiple interfaces with largest number of drop traffic on a module. |
.1.3.6.1.4.1.9.9.663.2.2.19
|
|
|
A collection of objects which provides MET hardware
capacity information per resource in the device. |
.1.3.6.1.4.1.9.9.663.2.2.20
|
|
|
A collection of objects which provides FIB TCAM entry
width information in conjunction with Layer 3 protocol in the device. |
.1.3.6.1.4.1.9.9.663.2.2.21
|
|
|
A collection of objects which provides forwarding table
resource information in the device. |
.1.3.6.1.4.1.9.9.663.2.2.22
|
Compliance Statements (4)
OID
.1.3.6.1.4.1.9.9.663.2.1.1The compliance statement for
CISCO-SWITCH-HARDWARE-CAPACITY-MIB. This statement is
deprecated and superseded by
ciscoSwitchHardwareCapacityMIBCompliance1.
CISCO-SWITCH-HARDWARE-CAPACITY-MIB. This statement is
deprecated and superseded by
ciscoSwitchHardwareCapacityMIBCompliance1.
Required groups
| mandatory | cshcMacUsageGroup | |
| mandatory | cshcVpnCamUsageGroup | |
| mandatory | cshcFibTcamUsageGroup | |
| mandatory | cshcProtocolFibTcamUsageGroup | |
| mandatory | cshcAdjacencyUsageGroup | |
| mandatory | cshcForwardingLoadGroup | |
| mandatory | cshcModuleInterfaceDropsGroup | |
| mandatory | cshcInterfaceBufferGroup | |
| mandatory | cshcInternalChannelGroup | |
| optional | cshcCPURateLimiterResourcesGroup |
This group is mandatory where Rate Limit feature is supported. |
| optional | cshcIcamResourcesGroup | This group is mandatory where ICAM is supported. |
| optional | cshcNetflowFlowMaskResourceGroup |
This group is mandatory where Netflow FlowMask feature is supported. |
OID
.1.3.6.1.4.1.9.9.663.2.1.2The compliance statement for
CISCO-SWITCH-HARDWARE-CAPACITY-MIB.
This statement is deprecated and superseded by
ciscoSwitchHardwareCapacityMIBCompliance2.
CISCO-SWITCH-HARDWARE-CAPACITY-MIB.
This statement is deprecated and superseded by
ciscoSwitchHardwareCapacityMIBCompliance2.
Required groups
| mandatory | cshcMacUsageGroup | |
| mandatory | cshcVpnCamUsageGroup | |
| mandatory | cshcFibTcamUsageGroup | |
| mandatory | cshcProtocolFibTcamUsageGroup | |
| mandatory | cshcAdjacencyUsageGroup | |
| mandatory | cshcForwardingLoadGroup | |
| mandatory | cshcModuleInterfaceDropsGroup | |
| mandatory | cshcInterfaceBufferGroup | |
| mandatory | cshcInternalChannelGroup | |
| optional | cshcCPURateLimiterResourcesGroup |
This group is mandatory where Rate Limit feature is supported. |
| optional | cshcIcamResourcesGroup | This group is mandatory where ICAM is supported. |
| optional | cshcNetflowFlowMaskResourceGroup |
This group is mandatory where Netflow FlowMask feature is supported. |
| optional | cshcFibTcamUsageExtGroup |
This group is mandatory where additional FIB TCAM usage information is available. |
OID
.1.3.6.1.4.1.9.9.663.2.1.3The compliance statement for
CISCO-SWITCH-HARDWARE-CAPACITY-MIB
CISCO-SWITCH-HARDWARE-CAPACITY-MIB
Required groups
| mandatory | cshcMacUsageGroup | |
| mandatory | cshcVpnCamUsageGroup | |
| mandatory | cshcFibTcamUsageGroup | |
| mandatory | cshcProtocolFibTcamUsageGroup | |
| mandatory | cshcAdjacencyUsageGroup | |
| mandatory | cshcForwardingLoadGroup | |
| mandatory | cshcModuleInterfaceDropsGroup | |
| mandatory | cshcInterfaceBufferGroup | |
| mandatory | cshcInternalChannelGroup | |
| optional | cshcCPURateLimiterResourcesGroup |
This group is mandatory where Rate Limit feature is supported. |
| optional | cshcIcamResourcesGroup | This group is mandatory where ICAM is supported. |
| optional | cshcNetflowFlowMaskResourceGroup |
This group is mandatory where Netflow FlowMask feature is supported. |
| optional | cshcFibTcamUsageExtGroup |
This group is mandatory where additional FIB TCAM usage information is available. |
| optional | cshcNetflowFlowResourceUsageGroup |
This group is mandatory where Netflow resource usage information is available. |
| optional | cshcMacUsageExtGroup |
This group is mandatory where additional Layer 2 Forwarding usage information is available. |
| optional | cshcProtocolFibTcamUsageExtGroup |
This group is mandatory where additional FIB TCAM usage information is available. |
| optional | cshcAdjacencyResourceUsageGroup |
This group is mandatory where per resource type adjacency capacity and usage information is available. |
| optional | cshcQosResourceUsageGroup |
This group is mandatory where QoS capacity and usage information is available. |
| optional | cshcModTopDropIfIndexListGroup |
This group is mandatory for platforms which can have multiple interfaces with largest number of total dropped packets on a module. |
| optional | cshcMetResourceUsageGroup |
This group is mandatory where MET usage information is available. |
OID
.1.3.6.1.4.1.9.9.663.2.1.4The compliance statement for
CISCO-SWITCH-HARDWARE-CAPACITY-MIB
CISCO-SWITCH-HARDWARE-CAPACITY-MIB
Required groups
| mandatory | cshcMacUsageGroup | |
| mandatory | cshcVpnCamUsageGroup | |
| mandatory | cshcFibTcamUsageGroup | |
| mandatory | cshcProtocolFibTcamUsageGroup | |
| mandatory | cshcAdjacencyUsageGroup | |
| mandatory | cshcForwardingLoadGroup | |
| mandatory | cshcModuleInterfaceDropsGroup | |
| mandatory | cshcInterfaceBufferGroup | |
| mandatory | cshcInternalChannelGroup | |
| optional | cshcCPURateLimiterResourcesGroup |
This group is mandatory where Rate Limit feature is supported. |
| optional | cshcIcamResourcesGroup | This group is mandatory where ICAM is supported. |
| optional | cshcNetflowFlowMaskResourceGroup |
This group is mandatory where Netflow FlowMask feature is supported. |
| optional | cshcFibTcamUsageExtGroup |
This group is mandatory where additional FIB TCAM usage information is available. |
| optional | cshcNetflowFlowResourceUsageGroup |
This group is mandatory where Netflow resource usage information is available. |
| optional | cshcMacUsageExtGroup |
This group is mandatory where additional Layer 2 Forwarding usage information is available. |
| optional | cshcProtocolFibTcamUsageExtGroup |
This group is mandatory where additional FIB TCAM usage information is available. |
| optional | cshcAdjacencyResourceUsageGroup |
This group is mandatory where per resource type adjacency capacity and usage information is available. |
| optional | cshcQosResourceUsageGroup |
This group is mandatory where QoS capacity and usage information is available. |
| optional | cshcModTopDropIfIndexListGroup |
This group is mandatory for platforms which can have multiple interfaces with largest number of total dropped packets on a module. |
| optional | cshcMetResourceUsageGroup |
This group is mandatory where MET usage information is available. |
| optional | cshcProtocolFibTcamWidthTypeGroup |
This group is mandatory where FIB TCAM entry width information is available. |
| optional | cshcForwardingResourceGroup |
This group is mandatory where forwarding table resource information is available. |