CISCO-SUBSCRIBER-SESSION-MIB Table View

This table describes a list of subscriber sessions currently
maintained by the system.
          
This table has a sparse dependent relationship on the ifTable,
containing a row for each interface having an interface type
describing a subscriber session.

csubSessionEntry row .1.3.6.1.4.1.9.9.786.1.1.1.1

This entry contains data describing a subscriber sessions,
including its state, configuration, and collected identities.

An entry exists for a corresponding entry in the ifTable
describing a subscriber sess…

Indexes

IF-MIBifIndex

Column	Syntax	OID
csubSessionType This object indicates the type of subscriber session.	CISCO-SUBSCRIBER-SESSION-TC-MIBSubSessionType Type Values: 1 all 2 other 3 pppSubscriber 4 pppoeSubscriber 5 l2tpSubscriber 6 l2fSubscriber 7 ipInterfaceSubscriber 8 ipPktSubscriber 9 ipDhcpv4Subscriber 10 ipRadiusSubscriber 11 l2MacSubscriber 12 l2Dhcpv4Subscriber 13 l2RadiusSubscriber	.1.3.6.1.4.1.9.9.786.1.1.1.1.1
csubSessionIpAddrAssignment This object indicates how the system assigns IP addresses to the subscriber: 'none' The system does not an involvement in (or is it aware of) the assignment an subscriber IP addresses.…	Enumeration Enumerated Values: 1 none 2 other 3 static 4 localPool 5 dhcpv4 6 dhcpv6 7 userProfileIpAddr 8 userProfileIpSubnet 9 userProfileNamedPool	.1.3.6.1.4.1.9.9.786.1.1.1.1.2
csubSessionState This object indicates the operational state of the subscriber session.	CISCO-SUBSCRIBER-SESSION-TC-MIBSubSessionState Type Values: 1 other 2 pending 3 up	.1.3.6.1.4.1.9.9.786.1.1.1.1.3
csubSessionAuthenticated This object indicates whether the system has successfully authenticated the subscriber session. 'false' The subscriber session is operationally up, but in the UNAUTHENTICATED state. …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.786.1.1.1.1.4
csubSessionRedundancyMode This object indicates the redundancy mode in which the subscriber session is operating.	CISCO-SUBSCRIBER-SESSION-TC-MIBSubSessionRedundancyMode Type Values: 1 none 2 other 3 active 4 standby	.1.3.6.1.4.1.9.9.786.1.1.1.1.5
csubSessionCreationTime This object indicates when the subscriber session was created (i.e., when the subscriber session was initiated).	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.786.1.1.1.1.6
csubSessionDerivedCfg This object indicates the row in the cdtTemplateTable (defined by the CISCO-DYNAMIC-TEMPLATE-MIB) describing the derived configuration for the subscriber session. Observe that the value of cdtTemplateType…	CISCO-DYNAMIC-TEMPLATE-TC-MIBDynamicTemplateName Type Constraints: range: 1..64	.1.3.6.1.4.1.9.9.786.1.1.1.1.7
csubSessionAvailableIdentities This object indicates the subscriber identities that the system has successfully collected for the subscriber session. Each bit in this bit string corresponds to a column in this table. If the bit is '0'…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubSessionIdentities Type Values: 0 ifIndex 1 subscriberLabel 2 macAddress 3 nativeVrf 4 nativeIpAddress 5 domainVrf 6 domainIpAddress 7 pbhk 8 remoteId 9 circuitId 10 nasPort 11 domain 12 username 13 acctSessionId 14 dnis 15 media 16 mlpNegotiated 17 protocol 18 serviceName 19 dhcpClass 20 tunnelName	.1.3.6.1.4.1.9.9.786.1.1.1.1.8
csubSessionSubscriberLabel This object indicates a positive integer-value uniquely identifying the subscriber session within the scope of the system. This column is valid only if the 'subscriberLabel' bit of the corresponding insta…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.1.1.1.9
csubSessionMacAddress This object indicates the MAC address of the subscriber. This column is valid only if the 'macAddress' bit of the corresponding instance of csubSessionAvailableIdentities is '1'.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.786.1.1.1.1.10
csubSessionNativeVrf This object indicates the VRF originating the subscriber session. This column is valid only if the 'nativeVrf' bit of the corresponding instance of csubSessionAvailableIdentities is '1'.	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberVRF Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.11
csubSessionNativeIpAddrType This object indicates the type of IP address assigned to the subscriber on the customer-facing side of the system. This column is valid only if the 'nativeIpAddress' bit of the corresponding instance of c…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.786.1.1.1.1.12
csubSessionNativeIpAddr This object indicates the IP address assigned to the subscriber on the customer-facing side of the system. This column is valid only if the 'nativeIpAddress' bit of the corresponding instance of csubSessi…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.13
csubSessionNativeIpMask This object indicates the corresponding mask for the IP address assigned to the subscriber on the customer-facing side of the system. This column is valid only if the 'nativeIpAddress' bit of the correspo…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.14
csubSessionDomainVrf This object indicates the VRF to which the system transfers the subscriber session's traffic. This column is valid only if the 'domainVrf' bit of the corresponding instance of csubSessionAvailableIdentiti…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberVRF Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.15
csubSessionDomainIpAddrType This object indicates the type of IP address assigned to the subscriber on the service-facing side of the system. This column is valid only if the 'domainIpAddress' bit of the corresponding instance of cs…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.786.1.1.1.1.16
csubSessionDomainIpAddr This object indicates the IP address assigned to the subscriber on the service-facing side of the system. This column is valid only if the 'domainIpAddress' bit of the corresponding instance of csubSessio…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.17
csubSessionDomainIpMask This object indicates the corresponding mask for the IP address assigned to the subscriber on the service-facing side of the system. This column is valid only if the 'domainIpAddress' bit of the correspon…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.18
csubSessionPbhk This object indicates the PBHK identifying the subscriber. This column is valid only if the 'pbhk' bit of the corresponding instance of csubSessionAvailableIdentities is '1'.	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberPbhk Type Constraints: range: 6	.1.3.6.1.4.1.9.9.786.1.1.1.1.19
csubSessionRemoteId This object indicates the Remote-Id identifying the 'calling station' or AN supporting the circuit that provides access to the subscriber. This column is valid only if the 'remoteId' bit of the correspond…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberRemoteId Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.20
csubSessionCircuitId This object indicates the Circuit-Id identifying the circuit supported by the 'calling station' or AN providing access to the subscriber. This column is valid only if the 'circuitId' bit of the correspond…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberCircuitId Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.21
csubSessionNasPort This object indicates the NAS port-identifier identifying the port on the NAS providing access to the subscriber. This column is valid only if the 'nasPort' bit of the corresponding instance of csubSessio…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberNasPort Type Constraints: range: 0..64	.1.3.6.1.4.1.9.9.786.1.1.1.1.22
csubSessionDomain This object indicates the domain associated with the subscriber. This column is valid only if the 'domain' bit of the corresponding instance of csubSessionAvailableIdentities is '1'.	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberDomain Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.23
csubSessionUsername This object indicates the username identifying the subscriber. This column is valid only if the 'username' bit of the corresponding instance of csubSessionAvailableIdentities is '1'.	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberUsername Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.24
csubSessionAcctSessionId This object indicates the accounting session identifier assigned to the subscriber session. This column is valid only if the 'accountingSid' bit of the corresponding instance of csubSessionAvailableIdenti…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberAcctSessionId Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.1.1.1.25
csubSessionDnis This object indicates the DNIS number dialed by the subscriber to access the 'calling station' or AN. This column is valid only if the 'dnis' bit of the corresponding instance of csubSessionAvailableIdent…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberDnis Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.26
csubSessionMedia This object indicates the type of media providing access to the subscriber. This column is valid only if the 'media' bit of the corresponding instance of csubSessionAvailableIdentities is '1'.	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberMediaType Type Values: 1 other 2 async 3 atm 4 ethernet 5 ip 6 isdn 7 mpls 8 sync	.1.3.6.1.4.1.9.9.786.1.1.1.1.27
csubSessionMlpNegotiated This object indicates whether the subscriber session was established using multi-link PPP negotiation. This column is valid only if the 'mlpNegotiated' bit of the corresponding instance of csubSessionAvai…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.786.1.1.1.1.28
csubSessionProtocol This object indicates the type of protocol providing access to the subscriber. This column is valid only if the 'protocol' bit of the corresponding instance of csubSessionAvailableIdentities is '1'.	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberProtocolType Type Values: 1 other 2 atom 3 ip 4 psdn 5 ppp 6 vpdn	.1.3.6.1.4.1.9.9.786.1.1.1.1.29
csubSessionDhcpClass This object indicates the name of the class matching the DHCP DISCOVER message received from the subscriber. This column is valid only if the 'dhcpClass' bit of the corresponding instance of csubSessionAv…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberDhcpClass Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.30
csubSessionTunnelName This object indicates the name of the VPDN used to carry the subscriber session to the system. This column is valid only if the 'tunnelName' bit of the corresponding instance of csubSessionAvailableIdenti…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberTunnelName Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.31
csubSessionLocationIdentifier This object indicates the location of the subscriber	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberLocationName Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.32
csubSessionServiceIdentifier This object indicates the name used to identify the services subscribed by a particular session.	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberServiceName Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.33
csubSessionLastChanged This object indicates when the subscriber session is updated with new policy information.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.786.1.1.1.1.34
csubSessionNativeIpAddrType2 This object indicates the type of IP address assigned to the subscriber on the customer-facing side of the system. This column is valid only if the 'nativeIpAddress' bit of the corresponding instance of c…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.786.1.1.1.1.35
csubSessionNativeIpAddr2 This object indicates the IP address assigned to the subscriber on the customer-facing side of the system. This column is valid only if the 'nativeIpAddress' bit of the corresponding instance of csubSessi…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.36
csubSessionNativeIpMask2 This object indicates the corresponding mask for the IP address assigned to the subscriber on the customer-facing side of the system. This column is valid only if the 'nativeIpAddress' bit of the correspo…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.1.1.1.37

This table describes a list of subscriber sessions currently
maintained by the system.  The tables sorts the subscriber
sessions first by the subscriber session's type and second by
the ifIndex assigned to the subscriber session.

csubSessionByTypeEntry row .1.3.6.1.4.1.9.9.786.1.1.2.1

This entry identifies a subscriber session.

An entry exists for a corresponding entry in the ifTable
describing a subscriber session. Currently, subscriber
sessions must have one of the following ifType va…

Indexes

csubSessionByType csubSessionIfIndex

Column	Syntax	OID
csubSessionByType This object indicates the type of the subscriber session.	CISCO-SUBSCRIBER-SESSION-TC-MIBSubSessionType Type Values: 1 all 2 other 3 pppSubscriber 4 pppoeSubscriber 5 l2tpSubscriber 6 l2fSubscriber 7 ipInterfaceSubscriber 8 ipPktSubscriber 9 ipDhcpv4Subscriber 10 ipRadiusSubscriber 11 l2MacSubscriber 12 l2Dhcpv4Subscriber 13 l2RadiusSubscriber	.1.3.6.1.4.1.9.9.786.1.1.2.1.1
csubSessionIfIndex This object indicates the ifIndex assigned to the subscriber session.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.786.1.1.2.1.2

This table contains sets of aggregated statistics relating to
subscriber sessions, where each set has a unique scope of
aggregation.

csubAggStatsEntry row .1.3.6.1.4.1.9.9.786.1.2.1.1

An entry contains a set of aggregated statistics relating to
those subscriber sessions that fall into a 'scope of
aggregation'.

A 'scope of aggregation' is the set of subscriber sessions
that meet specif…

Indexes

csubAggStatsPointType csubAggStatsPoint csubAggStatsSessionType

Column	Syntax	OID
csubAggStatsPointType This object indicates format of the csubAggStatsPoint for this entry. The format for the csubAggStatsPoint is as follows: csubAggStatsPointType csubAggStatsPoint -------------------…	Enumeration Enumerated Values: 1 physical 2 interface	.1.3.6.1.4.1.9.9.786.1.2.1.1.1
csubAggStatsPoint This object should be read with csubAggStatsPointType always. This object indicates one of the determining factors affecting the 'scope of aggregation' for the set of statistics contained by the row. …	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.786.1.2.1.1.2
csubAggStatsSessionType This object indicates one of the determining factors affecting the 'scope of aggregation' for the statistics contained by the row. If the value of this column is 'all', then the 'scope of aggregation' may…	CISCO-SUBSCRIBER-SESSION-TC-MIBSubSessionType Type Values: 1 all 2 other 3 pppSubscriber 4 pppoeSubscriber 5 l2tpSubscriber 6 l2fSubscriber 7 ipInterfaceSubscriber 8 ipPktSubscriber 9 ipDhcpv4Subscriber 10 ipRadiusSubscriber 11 l2MacSubscriber 12 l2Dhcpv4Subscriber 13 l2RadiusSubscriber	.1.3.6.1.4.1.9.9.786.1.2.1.1.3
csubAggStatsPendingSessions This object indicates the current number of subscriber sessions within the 'scope of aggregation' that are in the PENDING state.	sessionsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.2.1.1.4
csubAggStatsUpSessions This object indicates the current number of subscriber sessions within the 'scope of aggregation' that are in the UP state.	sessionsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.2.1.1.5
csubAggStatsAuthSessions This object indicates the current number of subscriber session within the 'scope of aggregation' that have been authenticated.	sessionsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.2.1.1.6
csubAggStatsUnAuthSessions This object indicates the current number of subscriber session within the 'scope of aggregation' that have not been authenticated.	sessionsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.2.1.1.7
csubAggStatsLightWeightSessions This object indicates the current number of subscriber sessions within the 'scope of aggregation' that are less resource intensive.	sessionsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.2.1.1.8
csubAggStatsRedSessions This object indicates the current number of subscriber sessions within the 'scope of aggregation' that are redundant (i.e., sessions with a csubSessionRedundancyMode of 'standby').	sessionsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.2.1.1.9
csubAggStatsHighUpSessions This object indicates the highest number of subscriber sessions within the 'scope of aggregation' observed simultaneously in the UP state since the last discontinuity time.	sessionsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.2.1.1.10
csubAggStatsAvgSessionUptime This object indicates the average time subscriber sessions within the 'scope of aggregation' spent in the UP state. The system calculates this average over all subscriber sessions maintained by all nodes …	secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.2.1.1.11
csubAggStatsAvgSessionRPM This object indicates the average rate (per minute) at which the nodes contained by the 'scope of aggregation' have established new subscriber sessions.	sessions per minuteSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.2.1.1.12
csubAggStatsAvgSessionRPH This object indicates the average rate (per hour) at which the nodes contained by the 'scope of aggregation' have established new subscriber sessions.	sessions per hourSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.2.1.1.13
csubAggStatsThrottleEngagements This object indicates the number of times that nodes contained within the 'scope of aggregation' have engaged the subscriber session throttle since the last discontinuity time. The mechanics of a subscrib…	engagementsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.786.1.2.1.1.14
csubAggStatsTotalCreatedSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' created since the discontinuity time. Discontinuities in the value of this counter can occur at re-initializ…	sessionsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.786.1.2.1.1.15
csubAggStatsTotalFailedSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' that were in the PENDING state and terminated for reasons other than disconnect since the last discontinuity time. …	sessionsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.786.1.2.1.1.16
csubAggStatsTotalUpSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' that transitioned to the UP state since the last discontinuity time. Discontinuities in the value of this co…	sessionsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.786.1.2.1.1.17
csubAggStatsTotalAuthSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' that transitioned from the UNAUTHENTICATED to the AUTHENTICATED state since the last discontinuity time. Dis…	sessionsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.786.1.2.1.1.18
csubAggStatsTotalDiscSessions This object indicates the total number of subscriber sessions terminated due to a disconnect event since the last discontinuity time. Discontinuities in the value of this counter can occur at re-initializ…	sessionsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.786.1.2.1.1.19
csubAggStatsTotalLightWeightSessions This object indicates the total number of subscriber sessions that are less resource intensive	sessionsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.786.1.2.1.1.20
csubAggStatsTotalFlowsUp This object indicates the total number of differential traffic classes on subscriber sessions. IP ACLs are used to create differential flows(Traffic Classes). Each Traffic Class can have a different set of features app…	sessionsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.786.1.2.1.1.21
csubAggStatsDayCreatedSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' created during the last 24 hours. The system calculates the value of this column by summing the values of al…	sessionsPerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.9.9.786.1.2.1.1.22
csubAggStatsDayFailedSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' that were in the PENDING state and terminated for reasons other than disconnect during the last 24 hours. Th…	sessionsPerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.9.9.786.1.2.1.1.23
csubAggStatsDayUpSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' that transitioned to the UP state during the last 24 hours. The system calculates the value of this column b…	sessionsPerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.9.9.786.1.2.1.1.24
csubAggStatsDayAuthSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' that transitioned from the UNAUTHENTICATED to the AUTHENTICATED state during the last 24 hours. The system c…	sessionsPerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.9.9.786.1.2.1.1.25
csubAggStatsDayDiscSessions This object indicates the total number of subscriber sessions terminated due to a disconnect event during the last 24 hours. The system calculates the value of this column by summing the values of all ins…	sessionsPerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.9.9.786.1.2.1.1.26
csubAggStatsCurrTimeElapsed This object indicates the time that has elapsed since the beginning of the current 15-minute measurement interval. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exce…	secondsUnsigned32 Constraints: range: 0-899	.1.3.6.1.4.1.9.9.786.1.2.1.1.27
csubAggStatsCurrValidIntervals This object indicates the number of intervals for which data was collected. The value of this column will be '96' unless the measurement was started (or restarted) within 1,440 minutes, in which case the value will be …	intervalsUnsigned32 Constraints: range: 0-96	.1.3.6.1.4.1.9.9.786.1.2.1.1.28
csubAggStatsCurrInvalidIntervals This object indicates the number of intervals in the range from 0 to csubCurrValidIntervals for which no data is available. This object will typically be '0' except in certain circumstances when some intervals are unav…	intervalsUnsigned32 Constraints: range: 0-96	.1.3.6.1.4.1.9.9.786.1.2.1.1.29
csubAggStatsCurrFlowsUp This object indicates the current number of differential traffic classes on subscriber sessions currently UP. IP ACLs are used to create differential flows (Traffic Classes).Each Traffic Class can have a different set o…	intervalsUnsigned32 Constraints: range: 0-96	.1.3.6.1.4.1.9.9.786.1.2.1.1.30
csubAggStatsCurrCreatedSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' created during the current 15-minute interval.	sessionsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.9.9.786.1.2.1.1.31
csubAggStatsCurrFailedSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' that were in the PENDING state and terminated for reasons other than disconnect during the current 15-minute interval.	sessionsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.9.9.786.1.2.1.1.32
csubAggStatsCurrUpSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' that transitioned to the UP state during the current 15-minute interval.	sessionsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.9.9.786.1.2.1.1.33
csubAggStatsCurrAuthSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' that transitioned from the UNAUTHENTICATED to the AUTHENTICATED state during the current 15-minute interval.	sessionsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.9.9.786.1.2.1.1.34
csubAggStatsCurrDiscSessions This object indicates the total number of subscriber sessions terminated due to a disconnect event during the current 15-minute interval.	sessionsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.9.9.786.1.2.1.1.35
csubAggStatsDiscontinuityTime The date and time (as determined by the system's clock) of the most recent occurrence of an event affecting the continuity of the aggregation statistics for this aggregation point.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.786.1.2.1.1.36

This table contains aggregated subscriber session performance
data collected for as much as a day's worth of 15-minute
measurement intervals.
          
This table has an expansion dependent relationship on the
csubAggStatsTable, containing zero or more rows for each row
contained by the csubAggStatsTable.
          
Observe that the collection and maintenance of aggregated
subscriber performance data is OPTIONAL for all scopes of
aggregation.  However, an implementation should maintain at
least one interval for the 'scope of aggregation' that contains
all subscriber sessions maintained by the system.

csubAggStatsIntEntry row .1.3.6.1.4.1.9.9.786.1.2.2.1

An entry contains the aggregated subscriber session performance
data collected over a single 15-minute measurement interval
within a 'scope of aggregation'. For further details regarding
'scope of aggregation', see the…

Indexes

csubAggStatsPointType csubAggStatsPoint csubAggStatsSessionType csubAggStatsIntNumber

Column	Syntax	OID
csubAggStatsIntNumber This object indicates the interval number identifying the 15-minute measurement interval for which aggregated subscriber session performance data was successfully collected by the system. The interval ide…	Unsigned32 Constraints: range: 1-96	.1.3.6.1.4.1.9.9.786.1.2.2.1.1
csubAggStatsIntValid This object indicates whether the data for the 15-minute measurement interval is valid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.786.1.2.2.1.2
csubAggStatsIntCreatedSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' created during the 15-minute measurement interval.	sessionsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.9.9.786.1.2.2.1.3
csubAggStatsIntFailedSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' that were in the PENDING state and terminated for reasons other than disconnect during the 15-minute measurement interval.	sessionsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.9.9.786.1.2.2.1.4
csubAggStatsIntUpSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' that transitioned to the UP state during the 15-minute measurement interval.	sessionsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.9.9.786.1.2.2.1.5
csubAggStatsIntAuthSessions This object indicates the total number of subscriber sessions within the 'scope of aggregation' that transitioned from the UNAUTHENTICATED to the AUTHENTICATED state during the 15-minute measurement interval.	sessionsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.9.9.786.1.2.2.1.6
csubAggStatsIntDiscSessions This object indicates the total number of subscriber sessions terminated due to a disconnect event during the 15-minute measurement interval.	sessionsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.9.9.786.1.2.2.1.7

Please enter the Table Description here.

csubAggStatsThreshEntry row .1.3.6.1.4.1.9.9.786.1.2.3.1

A row in this table exists for each row in the
csubAggStatsTable.
Each row defines the set of thresholds and evaluation attributes
for an aggregation point.

Indexes

csubSessionRisingThresh

Column	Syntax	OID
csubSessionRisingThresh This threshold, if non-zero, indicates the rising threshold for the value of csubAggStatsUpSessions for the aggregation point, When the current sample of csubAggStatsUpSessions is greater than or equal to this threshold…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.786.1.2.3.1.1
csubSessionFallingThresh This threshold, if non-zero, indicates the falling threshold for the value of csubAggStatsUpSessions for the aggregation point, When the current sample of csubAggStatsUpSessions is less than or equal to this threshold, …	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.786.1.2.3.1.2
csubSessionDeltaPercentFallingThresh This threshold, if non-zero, indicates the delta falling threshold as a percentage of the value of csubAggStatsUpSessions for the aggregation point, The delta as a percentage of csubAggStatsUpSessions (delta_percent) is…	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.9.9.786.1.2.3.1.3
csubSessionThreshEvalInterval The value of this object sets the number of seconds between samples for threshold evaluation. For implementations capable of per-session event evaluation of thresholds this object represents the maximum number of second…	Unsigned32r/w Constraints: range: 0-900	.1.3.6.1.4.1.9.9.786.1.2.3.1.4

This table contains the subscriber session jobs submitted by
the EMS/NMS.

csubJobEntry row .1.3.6.1.4.1.9.9.786.1.3.7.1

An entry describing a subscriber session job. At this time,
subscriber session jobs can perform one of two tasks:

- Subscriber Session Query
This type of job invokes the report generator, which builds
…

Indexes

csubJobId

Column	Syntax	OID
csubJobId This object indicates an arbitrary, positive integer-value uniquely identifying the subscriber session job.	SubscriberJobIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.786.1.3.7.1.1
csubJobStatus This object specifies the status of the subscriber session job. The following columns must be valid before activating a subscriber session job: - csubJobStorage - csubJobType - csubJobControl…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.786.1.3.7.1.2
csubJobStorage This object specifies what happens to the subscriber session job upon restart.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.786.1.3.7.1.3
csubJobType This object specifies the type of subscriber session job: 'noop' This type of job does nothing and simply serves as a convenient default value for newly created jobs, thereby allowing create-a…	Enumerationr/w Enumerated Values: 1 noop 2 query 3 clear	.1.3.6.1.4.1.9.9.786.1.3.7.1.4
csubJobControl This object specifies an action relating to the subscriber session job: 'noop' This action does nothing. 'start' If the corresponding instance of csubJobType is 'noo…	Enumerationr/w Enumerated Values: 1 noop 2 start 3 abort 4 release	.1.3.6.1.4.1.9.9.786.1.3.7.1.5
csubJobState This object indicates the current state of the subscriber session job: 'idle' This state indicates that the system has not executed the subscriber session job since it was created. …	Enumeration Enumerated Values: 1 idle 2 pending 3 inProgress 4 finished	.1.3.6.1.4.1.9.9.786.1.3.7.1.6
csubJobStartedTime This object indicates the value of sysUpTime when the system started executing the subscriber session job. This value will be '0' when the corresponding instance of csubJobState is 'idle' or 'pending'.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.786.1.3.7.1.7
csubJobFinishedTime This object indicates the value of sysUpTime when the system finished executing the subscriber session job, for whatever reason. This value will be '0' when the corresponding instance of csubJobState is 'idle', 'pendin…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.786.1.3.7.1.8
csubJobFinishedReason This object indicates the reason why the system finished executing the subscriber session job: 'invalid' Indicates that the corresponding instance of csubJobState is either 'idle', 'pe…	Enumeration Enumerated Values: 1 invalid 2 other 3 normal 4 aborted 5 insufficientResources 6 error	.1.3.6.1.4.1.9.9.786.1.3.7.1.9

This table contains subscriber session job parameters
describing match criteria.
          
This table has a sparse-dependent relationship on the
csubJobTable, containing a row for each job having a
csubJobType of 'query' or 'clear'.

csubJobMatchParamsEntry row .1.3.6.1.4.1.9.9.786.1.3.8.1

An entry describes a set of subscriber session match criteria.
The set contains those subscriber session identities specified
by csubJobMatchIdentities.

If the corresponding row in the csubJobTable has a cs…

Indexes

csubJobId

Column	Syntax	OID
csubJobMatchIdentities This object specifies the subscriber identities that the system uses to determine the subscriber sessions the job executes on. Each bit in this bit string corresponds to one or more columns in this table.…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubSessionIdentitiesr/w Type Values: 0 ifIndex 1 subscriberLabel 2 macAddress 3 nativeVrf 4 nativeIpAddress 5 domainVrf 6 domainIpAddress 7 pbhk 8 remoteId 9 circuitId 10 nasPort 11 domain 12 username 13 acctSessionId 14 dnis 15 media 16 mlpNegotiated 17 protocol 18 serviceName 19 dhcpClass 20 tunnelName	.1.3.6.1.4.1.9.9.786.1.3.8.1.1
csubJobMatchOtherParams This object specifies other parameters relating to subscriber sessions a subscriber session job may match against. Each bit in this bit string corresponds to a column in this table. If the bit is '0', th…	Bitsr/w Enumerated Values: 0 danglingDuration 1 state 2 authenticated 3 redundancyMode	.1.3.6.1.4.1.9.9.786.1.3.8.1.2
csubJobMatchSubscriberLabel This object specifies the subscriber label that the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'subscriberLabel' bit o…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberLabelr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.3.8.1.3
csubJobMatchMacAddress This object specifies the MAC address that the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'macAddress' bit of the corr…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.786.1.3.8.1.4
csubJobMatchNativeVrf This object specifies the native VRF the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'nativeVrf' bit of the correspondi…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberVRFr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.3.8.1.5
csubJobMatchNativeIpAddrType This object specifies the type of Internet address specified by csubJobMatchNativeIpAddr and csubJobMatchNativeIpMask. This value is valid only if the 'nativeIpAddress' bit of the corresponding instance o…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.786.1.3.8.1.6
csubJobMatchNativeIpAddr This object specifies the native IP address that the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'nativeIpAddress' bit …	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.3.8.1.7
csubJobMatchNativeIpMask This object specifies the mask used when matching the native IP address against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'nativeIpAddress' …	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.3.8.1.8
csubJobMatchDomainVrf This object specifies the domain VRF the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'domainVrf' bit of the correspondi…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberVRFr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.3.8.1.9
csubJobMatchDomainIpAddrType This object specifies the type of Internet address specified by csubJobMatchDomainIpAddr and csubJobMatchDomainIpMask. This value is valid only if the 'domainIpAddress' bit of the corresponding instance o…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.786.1.3.8.1.10
csubJobMatchDomainIpAddr This object specifies the domain IP address that the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'domainIpAddress' bit …	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.3.8.1.11
csubJobMatchDomainIpMask This object specifies the mask used when matching the domain IP address against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'domainIpAddress' …	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.3.8.1.12
csubJobMatchPbhk This object specifies the PBHK that the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'pbhk' bit of the corresponding ins…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberPbhkr/w Type Constraints: range: 6	.1.3.6.1.4.1.9.9.786.1.3.8.1.13
csubJobMatchRemoteId This object specifies the Remote-Id the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'remoteId' bit of the corresponding…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberRemoteIdr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.3.8.1.14
csubJobMatchCircuitId This object specifies the Circuit-Id the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'circuitId' bit of the correspondi…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberCircuitIdr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.3.8.1.15
csubJobMatchNasPort This object specifies the NAS port-identifier the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'nasPort' bit of the corr…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberNasPortr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.9.9.786.1.3.8.1.16
csubJobMatchDomain This object specifies the domain the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'domain' bit of the corresponding inst…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberDomainr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.3.8.1.17
csubJobMatchUsername This object specifies the username the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'username' bit of the corresponding …	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberUsernamer/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.3.8.1.18
csubJobMatchAcctSessionId This object specifies the accounting session identifier the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'accountingSid'…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberAcctSessionIdr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.3.8.1.20
csubJobMatchDnis This object specifies the DNIS number the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'dnis' bit of the corresponding i…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberDnisr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.3.8.1.21
csubJobMatchMedia This object specifies the media type the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'media' bit of the corresponding i…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberMediaTyper/w Type Values: 1 other 2 async 3 atm 4 ethernet 5 ip 6 isdn 7 mpls 8 sync	.1.3.6.1.4.1.9.9.786.1.3.8.1.22
csubJobMatchMlpNegotiated This object specifies the MLP negotiated flag the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'mlpNegotiated' bit of th…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.786.1.3.8.1.23
csubJobMatchProtocol This object specifies the protocol type the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'protocol' bit of the correspon…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberProtocolTyper/w Type Values: 1 other 2 atom 3 ip 4 psdn 5 ppp 6 vpdn	.1.3.6.1.4.1.9.9.786.1.3.8.1.24
csubJobMatchServiceName This object specifies the service name the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'serviceName' bit of the corresp…	CISCO-CBP-TC-MIBCbpElementNamer/w Type Constraints: range: 0..127	.1.3.6.1.4.1.9.9.786.1.3.8.1.25
csubJobMatchDhcpClass This object specifies the DHCP class name the system matches against subscriber sessions in the process of executing a subscriber session job. This value is valid only if the 'dhcpClass' bit of the corres…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberDhcpClassr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.3.8.1.26
csubJobMatchTunnelName This object specifies the tunnel name the system matches against subscriber session in the process of executing a subscriber session job. This value is valid only if the 'tunnelName' bit of the correspond…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubscriberTunnelNamer/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.786.1.3.8.1.27
csubJobMatchDanglingDuration This object specifies the minimum interval of time a subscriber session can remain dangling in order for the system to consider it a match in the process of executing a subscriber session job. A 'dangling' subscriber se…	Unsigned32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.9.9.786.1.3.8.1.28
csubJobMatchState This object specifies the state of a subscriber session in order for the system to consider a match in the process of executing a subscriber session job. The value 'other' is not valid and an implementati…	CISCO-SUBSCRIBER-SESSION-TC-MIBSubSessionStater/w Type Values: 1 other 2 pending 3 up	.1.3.6.1.4.1.9.9.786.1.3.8.1.29
csubJobMatchAuthenticated This object specifies whether a subscriber session should be unauthenticated for the system to consider a match in the process of executing a subscriber session job. If this column is 'false', then the su…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.786.1.3.8.1.30
csubJobMatchRedundancyMode This object specifies the redudancy mode of the subscriber session in order for the system to consider a match in the process of executing a subscriber session job. The value 'other' is not valid and an i…	CISCO-SUBSCRIBER-SESSION-TC-MIBSubSessionRedundancyModer/w Type Values: 1 none 2 other 3 active 4 standby	.1.3.6.1.4.1.9.9.786.1.3.8.1.31

This table contains subscriber session job parameters
describing query parameters.
          
This table has a sparse-dependent relationship on the
csubJobTable, containing a row for each job having a
csubJobType of 'query'.

csubJobQueryParamsEntry row .1.3.6.1.4.1.9.9.786.1.3.9.1

An entry describes a set of subscriber session query
parameters.

The system automatically creates an entry when the EMS/NMS sets
the corresponding instance of csubJobType to 'query'. Likewise,
the system a…

Indexes

csubJobId

Column	Syntax	OID
csubJobQuerySortKey1 This object specifies the first subscriber identity that the system uses when sorting subscriber sessions into the final report corresponding to a subscriber session query. It is not valid to set this col…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubSessionIdentityr/w Type Values: 1 other 2 ifIndex 3 subscriberLabel 4 macAddress 5 nativeVrf 6 nativeIpAddress 7 domainVrf 8 domainIpAddress 9 pbhk 10 remoteId 11 circuitId 12 nasPort 13 domain 14 username 15 acctSessionId 16 dnis 17 media 18 mlpNegotiated 19 protocol 20 serviceName 21 dhcpClass 22 tunnelName	.1.3.6.1.4.1.9.9.786.1.3.9.1.1
csubJobQuerySortKey2 This object specifies the second subscriber identity that the system uses when sorting subscriber sessions into the final report corresponding to a subscriber session query. If it is the desire to have th…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubSessionIdentityr/w Type Values: 1 other 2 ifIndex 3 subscriberLabel 4 macAddress 5 nativeVrf 6 nativeIpAddress 7 domainVrf 8 domainIpAddress 9 pbhk 10 remoteId 11 circuitId 12 nasPort 13 domain 14 username 15 acctSessionId 16 dnis 17 media 18 mlpNegotiated 19 protocol 20 serviceName 21 dhcpClass 22 tunnelName	.1.3.6.1.4.1.9.9.786.1.3.9.1.2
csubJobQuerySortKey3 This object specifies the third subscriber identity that the system uses when sorting subscriber sessions into the final report corresponding to a subscriber session query. If it is the desire to have the…	CISCO-SUBSCRIBER-IDENTITY-TC-MIBSubSessionIdentityr/w Type Values: 1 other 2 ifIndex 3 subscriberLabel 4 macAddress 5 nativeVrf 6 nativeIpAddress 7 domainVrf 8 domainIpAddress 9 pbhk 10 remoteId 11 circuitId 12 nasPort 13 domain 14 username 15 acctSessionId 16 dnis 17 media 18 mlpNegotiated 19 protocol 20 serviceName 21 dhcpClass 22 tunnelName	.1.3.6.1.4.1.9.9.786.1.3.9.1.3
csubJobQueryResultingReportSize This object indicates the number of subscriber sessions that matched the corresponding subscriber session query. The value of this column should be '0' unless the corresponding value of csubJobState is 'f…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.786.1.3.9.1.4

This table lists the subscriber session jobs currently pending
in the subscriber session job queue.

csubJobQueueEntry row .1.3.6.1.4.1.9.9.786.1.3.10.1

An entry describing an subscriber session job in the
subscriber session job queue.

The system creates an entry in this table when it places a
subscriber session job on the subscriber session job queue. It
…

Indexes

csubJobQueueNumber

Column	Syntax	OID
csubJobQueueNumber This object indicates an positive, integer-value that uniquely identifies the entry in the table. The value of this object starts at '1' and monotonically increases for each subscriber session job inserted into the subs…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.786.1.3.10.1.1
csubJobQueueJobId This object indicates the identifier associated with the subscriber session job.	SubscriberJobIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.786.1.3.10.1.2

This table contains the reports corresponding to subscriber
session jobs that have a csubJobType of 'query' and
csubJobState of 'finished'.
          
This table has an expansion dependent relationship on the
csubJobTable, containing zero or more rows for each job.

csubJobReportEntry row .1.3.6.1.4.1.9.9.786.1.3.11.1

An entry describes a subscriber session that satisfied the
match criteria specified by the corresponding job.

The system creates an entry for each subscriber session that
satisfied the specified match crite…

Indexes

csubJobId csubJobReportId

Column	Syntax	OID
csubJobReportId This object indicates an arbitrary, positive, integer-value that uniquely identifies this entry in a report. This auxiliary value is necessary, as the corresponding subscriber session job can specify up to three subscr…	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.786.1.3.11.1.1
csubJobReportSession This object indicates the ifIndex-value assigned to the subscriber session that satisfied the match criteria specified by the corresponding subscriber session job having a csubJobType of 'query'.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.786.1.3.11.1.2