CISCO-PACKET-CAPTURE-MIB Table View

A table of configuration to be used in the packet
capture sessions. This entry may be modified if value
of corresponding instance of cpcSessionConfigStatus
is 'active'.

cpcSessionConfigEntry row .1.3.6.1.4.1.9.9.602.1.1.2.1

An entry containing management information of a packet
capture session.

Indexes

cpcSessionId

Column	Syntax	OID
cpcSessionId An unique number which represents a session.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.602.1.1.2.1.1
cpcSessionOperStatus Operational status of a packet capture session. other : none of the following. inProgress : packet capture session is in progress. completed : number of captured frames has reached the …	Enumeration Enumerated Values: 1 other 2 inProgress 3 completed 4 stopped 5 storageFull 6 bufferFull	.1.3.6.1.4.1.9.9.602.1.1.2.1.2
cpcSessionDestFileName The destination file name used to store the captured frames. Value of this object must be specified in the format of <device>:<filename> for local location, or <protocol>://<server>/<filename> for network location. …	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.602.1.1.2.1.3
cpcSessionPacketLength The length of packet to be captured by this session. If the length of an actual packet is greater than the value of this object, the session will only capture the first number of bytes specified by this object. A value …	octetsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.602.1.1.2.1.4
cpcSessionPacketLimits The number of packets to be captured by this session. A value of zero for this object indicates that there is no limitation. When the value of this object is zero, the session remains 'inProgress' until it is administra…	packetsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.602.1.1.2.1.5
cpcSessionAction The action control for this capture session. Setting this object to 'start' causes the capture session to be started if it is not running. Setting this object to 'stop' terminates the capturing session if it is runni…	Enumerationr/w Enumerated Values: 1 start 2 stop	.1.3.6.1.4.1.9.9.602.1.1.2.1.6
cpcSessionConfigStatus The status of this conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.602.1.1.2.1.7
cpcSessionPacketRateLimit Rate limit for this session. Only packets within the rate may be captured. A value of zero for this object indicates that there is no rate limitation. This object may not be modified if value of the corre…	packets per secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.602.1.1.2.1.8
cpcSessionDescr Provides description of this session.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.602.1.1.2.1.9

A table of interface information to be used in
the packet capture session.

cpcCaptureSourceIfEntry row .1.3.6.1.4.1.9.9.602.1.1.4.1

An entry containing interface related management
information for a packet capture session.

The entry is created and deleted by using
cpcCaptureSourceIfStatus object.

The entry may not be mod…

Indexes

cpcSessionId IF-MIBifIndex

Column	Syntax	OID
cpcCaptureSourceIfDirection The direction of traffic to be captured. rx : Only ingress traffic will be captured. tx : Only egress traffic will be captured. both: Traffic from both directions will be …	Enumerationr/w Enumerated Values: 1 rx 2 tx 3 both	.1.3.6.1.4.1.9.9.602.1.1.4.1.1
cpcCaptureSourceIfStatus The status of this conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.602.1.1.4.1.2

A table of MAC filter information to be used in
the packet capture session.

cpcMacFilterEntry row .1.3.6.1.4.1.9.9.602.1.2.2.1

An entry containing management information about
a packet capture filter based on MAC address.
The entry is created or deleted by using
cpcMacFilterRowStatus object.

The entry may not be modified, created o…

Indexes

cpcSessionId cpcMacFilterMacAddress cpcMacFilterCriteria

Column	Syntax	OID
cpcMacFilterMacAddress The filtered MAC address. Incorporated with the corresponding instance value of crcMacFilterCriteria, packet capture will capture packets sending from or to the address specified by this object.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.602.1.2.2.1.1
cpcMacFilterCriteria The filter criteria of the entry.	CiscoPacketCaptureFilterCriteria Type Values: 1 source 2 dest	.1.3.6.1.4.1.9.9.602.1.2.2.1.2
cpcMacFilterRowStatus The status of this conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.602.1.2.2.1.3

A table of IP filter information to be used in
the packet capture session.

cpcIpFilterEntry row .1.3.6.1.4.1.9.9.602.1.2.3.1

An entry containing management information if IP based
packet capture filter for the packet capture session.

The entry can be created or deleted by using
cpcIpFilterRowStatus object.

The ent…

Indexes

cpcSessionId cpcIpFilterAddressType cpcIpFilterAddress cpcIpFilterCriteria

Column	Syntax	OID
cpcIpFilterAddressType The type of Internet address is configured in this packet capture filter.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.602.1.2.3.1.1
cpcIpFilterAddress The Internet address for the filter. The type of this address is determined by the value of the cpcIpFilterAddressType object. The cpcIpFilterAddress may not be empty due to the SIZE restriction. Incorpor…	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.9.9.602.1.2.3.1.2
cpcIpFilterCriteria The filter criteria of the entry.	CiscoPacketCaptureFilterCriteria Type Values: 1 source 2 dest	.1.3.6.1.4.1.9.9.602.1.2.3.1.3
cpcIpFilterMask The prefix length value associated with the corresponding cpcIpFilterAddress. The value of zero indicates that no IP mask is associated with the corresponding cpcIpFilterAddress. This object may be modi…	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.9.9.602.1.2.3.1.4
cpcIpFilterRowStatus The status of this conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.602.1.2.3.1.5

A table of packet length filter configuration
to be used in the packet capture sessions.

cpcPacketLengthFilterEntry row .1.3.6.1.4.1.9.9.602.1.2.6.1

An entry contains management information about a packet
capture filter based on packet length. A row is created
for each entry in cpcSessionConfigTable.

This entry may not be modified if value of the corres…

Indexes

cpcSessionId

Column	Syntax	OID
cpcPacketLengthFilterMin This object specifies the minimum length of the packet to be captured. Packets having length smaller than this value will not be captured. A zero value means there is no minimum length limit. The value of cpcPacketLeng…	bytesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.602.1.2.6.1.1
cpcPacketLengthFilterMax This object specifies the maximum length of the packet to be captured. Packets having length bigger than this value will not be captured. A zero value means there is no maximum length limit. The value of cpcPacketLengt…	bytesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.602.1.2.6.1.2

This table lists Ethertype filter configuration
to be used in the packet capture sessions.

cpcEthertypeFilterEntry row .1.3.6.1.4.1.9.9.602.1.2.8.1

An entry contains management information about
a packet capture filter based on Ethertype.

This entry may not be modified if value of the
corresponding instance of cpcSessionOperStatus is
'inProgress'.

Indexes

cpcSessionId cpcEthertypeFilterValue

Column	Syntax	OID
cpcEthertypeFilterValue The ethertype value to indicate which packet to be captured.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.602.1.2.8.1.1
cpcEthertypeFilterStatus This object specifies the status of this conceptual row and is used to manage creation, and deletion of entries in this table. Whenever the current number of rows is equal to the value of cpcMaxEthertypeFilterAllowed, s…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.602.1.2.8.1.2

A table of VLAN filter information to be used
in packet capture sessions.

cpcVlanFilterEntry row .1.3.6.1.4.1.9.9.602.1.2.10.1

An entry contains management information about
a packet capture filter based on VLAN. The entry
is created or deleted using cpcVlanFilterRowStatus
object.

This entry may not be modified if value of the
cor…

Indexes

cpcSessionId cpcVlanFilterVlanIndex

Column	Syntax	OID
cpcVlanFilterVlanIndex The VLAN index value of this filter.	CISCO-VTP-MIBVlanIndex Type Constraints: range: 0..4095	.1.3.6.1.4.1.9.9.602.1.2.10.1.1
cpcVlanFilterRowStatus This object specifies the status of this conceptual row and is used to manage creation, and deletion of entries in this table. Whenever the current number of rows is equal to the value of cpcMaxVlanFilterAllowed, setti…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.602.1.2.10.1.2

A table of Access-Group filter information to be
used in packet capture sessions.

cpcAccessGroupFilterEntry row .1.3.6.1.4.1.9.9.602.1.2.12.1

An entry contains management information about
a packet capture filter based on Access-Group number
or name. The entry is created or deleted using
cpcAccessGroupFilterStatus object.

This entry may not be …

Indexes

cpcSessionId cpcAccessGroupFilterType cpcAccessGroupFilterName

Column	Syntax	OID
cpcAccessGroupFilterType The way the ACL denoted by cpcAccessGroupFilterName is applied to the packets. hardware: hardware based software: software based.	Enumeration Enumerated Values: 1 hardware 2 software	.1.3.6.1.4.1.9.9.602.1.2.12.1.1
cpcAccessGroupFilterName The ACL name or ACL number used in this package capture filter.	OctetString Constraints: range: 1-99	.1.3.6.1.4.1.9.9.602.1.2.12.1.2
cpcAccessGroupFilterStatus This object specifies the status of this conceptual row and is used to manage creation, and deletion of entries in this table. Whenever the current number of rows is equal to the value of cpcMaxAccessGroupFilterAllowed,…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.602.1.2.12.1.3

A table of buffer configuration and controls for
packet capture sessions.

cpcBufferConfigEntry row .1.3.6.1.4.1.9.9.602.1.3.1.1

An entry contains management information for a packet capture
session's buffer. An entry is created corresponding to each entry
in cpcSessionConfigTable.

This entry may not be modified if value of the corre…

Indexes

cpcSessionId

Column	Syntax	OID
cpcBufferType Type of the buffer for a packet capture session. linear : captured packets will be kept in the buffer one after the other. If there is no available space in the buffer, packet capture…	Enumerationr/w Enumerated Values: 1 linear 2 circular	.1.3.6.1.4.1.9.9.602.1.3.1.1.1
cpcBufferSize Size of the buffer for a packet capture session. A value zero for this object indicates that there is no limitation.	Kilo-bytesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.602.1.3.1.1.2
cpcBufferAction The action control for this packet capture session buffer. noAction: no action (do nothing). clear: clear this capture buffer. export: exporting the buffer contents to the storage specified by cpcSess…	Enumerationr/w Enumerated Values: 1 noAction 2 clear 3 export	.1.3.6.1.4.1.9.9.602.1.3.1.1.3
cpcBufferOperStatus Operational status of a packet capture buffer. other : none of the following. exporting : buffer is being exported to the storage denoted by cpcSessionDestFileName from c…	Enumeration Enumerated Values: 1 other 2 exporting	.1.3.6.1.4.1.9.9.602.1.3.1.1.4

A table of schedule configuration and information for packet
capture sessions.

cpcScheduleConfigEntry row .1.3.6.1.4.1.9.9.602.1.4.1.1

An entry containing schedule configuration and information
for a packet capture session. An entry is created corresponding
to each entry in cpcSessionConfigTable if scheduled operation
is required for a packet capture s…

Indexes

cpcSessionId

Column	Syntax	OID
cpcScheduleStartTime The date and time this packet capture session will be started. A value of all zero with length of eight indicates either the scheduled time has expired or none is scheduled.	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.602.1.4.1.1.1
cpcScheduleCapturePeriod The length of time, in seconds, that this packet capture session will be running. Value of zero indicates that there is no restriction on the capture period.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.602.1.4.1.1.2

A table of statistic information for packet capture
sessions.

cpcSessionStatsEntry row .1.3.6.1.4.1.9.9.602.1.5.1.1

An entry contains statistic information of a
packet capture session.

Indexes

cpcSessionId

Column	Syntax	OID
cpcSessionPacketsReceived Indicates the number of packets received in this sessions.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.602.1.5.1.1.1
cpcSessionPacketsCaptured Indicates the number of packets captured in this session.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.602.1.5.1.1.2
cpcSessionPacketsDropped Indicates the number of packets dropped in this session.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.602.1.5.1.1.3