CISCO-PACKET-CAPTURE-MIB
The MIB module for the management of packet capture
feature.
- Source file
CISCO-PACKET-CAPTURE-MIB- Last revised
- Identity
ciscoPacketCaptureMIB- Base OID
1.3.6.1.4.1.9.9.602
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-VTP-MIB | VlanIndex |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus TEXTUAL-CONVENTION (no object page) |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-PACKET-CAPTURE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-PACKET-CAPTURE-MIB::ciscoPacketCaptureMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PACKET-CAPTURE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PACKET-CAPTURE-MIB::ciscoPacketCaptureMIB'
Objects (78)
Showing 78 of 78 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.602 |
||
.1.3.6.1.4.1.9.9.602.0 |
||
.1.3.6.1.4.1.9.9.602.1 |
||
.1.3.6.1.4.1.9.9.602.1.1 |
||
.1.3.6.1.4.1.9.9.602.1.1.1 |
||
.1.3.6.1.4.1.9.9.602.1.1.2 |
||
.1.3.6.1.4.1.9.9.602.1.1.2.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.602.1.1.2.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.602.1.1.2.1.2 |
|
.1.3.6.1.4.1.9.9.602.1.1.2.1.3 |
||
|
octetsSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.9.9.602.1.1.2.1.4 |
|
|
packetsSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.9.9.602.1.1.2.1.5 |
|
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.602.1.1.2.1.6 |
.1.3.6.1.4.1.9.9.602.1.1.2.1.7 |
||
|
packets per secondSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.9.9.602.1.1.2.1.8 |
|
|
|
.1.3.6.1.4.1.9.9.602.1.1.2.1.9 |
|
.1.3.6.1.4.1.9.9.602.1.1.3 |
||
.1.3.6.1.4.1.9.9.602.1.1.4 |
||
.1.3.6.1.4.1.9.9.602.1.1.4.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.602.1.1.4.1.1 |
|
.1.3.6.1.4.1.9.9.602.1.1.4.1.2 |
||
.1.3.6.1.4.1.9.9.602.1.2 |
||
.1.3.6.1.4.1.9.9.602.1.2.1 |
||
.1.3.6.1.4.1.9.9.602.1.2.10 |
||
.1.3.6.1.4.1.9.9.602.1.2.10.1 |
||
.1.3.6.1.4.1.9.9.602.1.2.10.1.1 |
||
.1.3.6.1.4.1.9.9.602.1.2.10.1.2 |
||
.1.3.6.1.4.1.9.9.602.1.2.11 |
||
.1.3.6.1.4.1.9.9.602.1.2.12 |
||
.1.3.6.1.4.1.9.9.602.1.2.12.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.602.1.2.12.1.1 |
|
|
OctetString
|
.1.3.6.1.4.1.9.9.602.1.2.12.1.2 |
|
.1.3.6.1.4.1.9.9.602.1.2.12.1.3 |
||
.1.3.6.1.4.1.9.9.602.1.2.2 |
||
.1.3.6.1.4.1.9.9.602.1.2.2.1 |
||
.1.3.6.1.4.1.9.9.602.1.2.2.1.1 |
||
.1.3.6.1.4.1.9.9.602.1.2.2.1.2 |
||
.1.3.6.1.4.1.9.9.602.1.2.2.1.3 |
||
.1.3.6.1.4.1.9.9.602.1.2.3 |
||
.1.3.6.1.4.1.9.9.602.1.2.3.1 |
||
.1.3.6.1.4.1.9.9.602.1.2.3.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.9.9.602.1.2.3.1.2 |
|
.1.3.6.1.4.1.9.9.602.1.2.3.1.3 |
||
|
|
.1.3.6.1.4.1.9.9.602.1.2.3.1.4 |
|
.1.3.6.1.4.1.9.9.602.1.2.3.1.5 |
||
.1.3.6.1.4.1.9.9.602.1.2.4 |
||
.1.3.6.1.4.1.9.9.602.1.2.5 |
||
.1.3.6.1.4.1.9.9.602.1.2.6 |
||
.1.3.6.1.4.1.9.9.602.1.2.6.1 |
||
|
bytesSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.9.9.602.1.2.6.1.1 |
|
|
bytesSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.9.9.602.1.2.6.1.2 |
|
.1.3.6.1.4.1.9.9.602.1.2.7 |
||
.1.3.6.1.4.1.9.9.602.1.2.8 |
||
.1.3.6.1.4.1.9.9.602.1.2.8.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.602.1.2.8.1.1 |
|
.1.3.6.1.4.1.9.9.602.1.2.8.1.2 |
||
.1.3.6.1.4.1.9.9.602.1.2.9 |
||
.1.3.6.1.4.1.9.9.602.1.3 |
||
.1.3.6.1.4.1.9.9.602.1.3.1 |
||
.1.3.6.1.4.1.9.9.602.1.3.1.1 |
||
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.602.1.3.1.1.1 |
|
|
Kilo-bytesSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.9.9.602.1.3.1.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.602.1.3.1.1.3 |
|
Enumeration
|
.1.3.6.1.4.1.9.9.602.1.3.1.1.4 |
|
.1.3.6.1.4.1.9.9.602.1.4 |
||
.1.3.6.1.4.1.9.9.602.1.4.1 |
||
.1.3.6.1.4.1.9.9.602.1.4.1.1 |
||
.1.3.6.1.4.1.9.9.602.1.4.1.1.1 |
||
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.4.1.9.9.602.1.4.1.1.2 |
|
.1.3.6.1.4.1.9.9.602.1.5 |
||
.1.3.6.1.4.1.9.9.602.1.5.1 |
||
.1.3.6.1.4.1.9.9.602.1.5.1.1 |
||
.1.3.6.1.4.1.9.9.602.1.5.1.1.1 |
||
.1.3.6.1.4.1.9.9.602.1.5.1.1.2 |
||
.1.3.6.1.4.1.9.9.602.1.5.1.1.3 |
||
.1.3.6.1.4.1.9.9.602.2 |
||
.1.3.6.1.4.1.9.9.602.2.1 |
||
.1.3.6.1.4.1.9.9.602.2.2 |
Dependencies (12) 8 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- CISCO-TCcisco
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- RMON-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-VTP-MIBcisco
- CISCO-PACKET-CAPTURE-MIBciscoselected
Type Definitions (1)
| Enumeration |
source(1)dest(2) |
Conformance Groups (16)
|
cpcMaxSessionAllowed cpcSessionOperStatus cpcSessionMaxSources cpcSessionPacketLength cpcSessionPacketLimits cpcSessionAction cpcSessionConfigStatus cpcCaptureSourceIfDirection cpcCaptureSourceIfStatus
A collection of object(s) that provides the generic
configuration for packet capture feature. |
.1.3.6.1.4.1.9.9.602.2.2.1
|
|
|
A collection of object(s) that provides general
filter configuration for packet capture feature. |
.1.3.6.1.4.1.9.9.602.2.2.2
|
|
|
A collection of object(s) that provides the MAC
address filter configuration for packet capture feature. |
.1.3.6.1.4.1.9.9.602.2.2.3
|
|
|
A collection of object(s) that provides the IP
address filter configuration for packet capture feature. |
.1.3.6.1.4.1.9.9.602.2.2.4
|
|
|
A collection of object(s) that provides configuration
for destination file for packet capture feature. |
.1.3.6.1.4.1.9.9.602.2.2.5
|
|
|
A collection of object(s) that provides packet
length filter configuration for packet capture feature. |
.1.3.6.1.4.1.9.9.602.2.2.6
|
|
|
A collection of object(s) that provides Ethertype
filter configuration for packet capture feature. |
.1.3.6.1.4.1.9.9.602.2.2.7
|
|
|
A collection of object(s) that provides VLAN
filter configuration for packet capture feature. |
.1.3.6.1.4.1.9.9.602.2.2.8
|
|
|
A collection of object(s) that provides Access
Group filter configuration for packet capture feature. |
.1.3.6.1.4.1.9.9.602.2.2.9
|
|
|
A collection of object(s) that provides buffer
configuration for packet capture feature. |
.1.3.6.1.4.1.9.9.602.2.2.10
|
|
|
A collection of object(s) that provides schedule
configuration for packet capture feature. |
.1.3.6.1.4.1.9.9.602.2.2.11
|
|
|
A collection of object(s) that provides statistic
information for packet capture feature. |
.1.3.6.1.4.1.9.9.602.2.2.12
|
|
|
A collection of object(s) that provides information on
the maximum MAC address filter allowed for each packet capture session. |
.1.3.6.1.4.1.9.9.602.2.2.13
|
|
|
A collection of object(s) that provides information on
the maximum IP address filter allowed for each packet capture session. |
.1.3.6.1.4.1.9.9.602.2.2.14
|
|
|
A collection of object(s) that provides rate limit
configuration for packet capture feature. |
.1.3.6.1.4.1.9.9.602.2.2.15
|
|
|
A collection of object(s) that provides session
description configuration for packet capture feature. |
.1.3.6.1.4.1.9.9.602.2.2.16
|
Compliance Statements (2)
OID
.1.3.6.1.4.1.9.9.602.2.1.1The compliance statement for devices that implement
CISCO-PACKET-CAPTURE-MIB.
CISCO-PACKET-CAPTURE-MIB.
Required groups
| mandatory | cpcGenericConfigGroup | |
| optional | cpcFilterConfigGroup |
This group is mandatory in devices running software which support filter configuration for packet capture feature. |
| optional | cpcMacFilterConfigGroup |
This group is mandatory in devices running software which support MAC address filter configuration for packet capture feature. |
| optional | cpcIpFilterConfigGroup |
This group is mandatory in devices running software which support IP address filter configuration for packet capture feature. |
| optional | cpcDestFileNameConfigGroup |
This group is mandatory in devices running software which support destination file configuration for packet capture feature. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| cpcSessionConfigStatus | readonly | Write access is not required if the managed device has the session entry created by default. |
|
| cpcCaptureSourceIfStatus |
active(1), createAndGo(4), destroy(6)
|
Support of 'createAndWait' are not required. | |
| cpcMacFilterRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of 'createAndWait' are not required. | |
| cpcIpFilterRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of 'createAndWait' are not required. |
OID
.1.3.6.1.4.1.9.9.602.2.1.2The compliance statement for devices that implement
CISCO-PACKET-CAPTURE-MIB.
CISCO-PACKET-CAPTURE-MIB.
Required groups
| mandatory | cpcGenericConfigGroup | |
| optional | cpcFilterConfigGroup |
This group is mandatory in devices running software which support filter configuration for packet capture feature. |
| optional | cpcMacFilterConfigGroup |
This group is mandatory in devices running software which support MAC address filter configuration for packet capture feature. |
| optional | cpcIpFilterConfigGroup |
This group is mandatory in devices running software which support IP address filter configuration for packet capture feature. |
| optional | cpcDestFileNameConfigGroup |
This group is mandatory in devices running software which support destination file configuration for packet capture feature. |
| optional | cpcPacketLengthFilterConfigGroup |
This group is mandatory in devices running software which supports packet length filter configuration for packet capture feature. |
| optional | cpcEthertypeFilterConfigGroup |
This group is mandatory in devices running software which supports Ethertype filter configuration for packet capture feature. |
| optional | cpcVlanFilterConfigGroup |
This group is mandatory in devices running software which supports VLAN filter configuration for packet capture feature. |
| optional | cpcAccessGroupFilterConfigGroup |
This group is mandatory in devices running software which supports Acccess Control List filter configuration for packet capture feature. |
| optional | cpcBufferConfigGroup |
This group is mandatory in devices running software which supports buffer configuration for packet capture feature. |
| optional | cpcScheduleConfigGroup |
This group is mandatory in devices running software which supports scheduler configuration for packet capture feature. |
| optional | cpcSessionStatsGroup |
This group is mandatory in devices running software which provides statistic information for packet capture feature. |
| optional | cpcMaxMacFilterConfigGroup |
This group is mandatory in devices running software which provides information for maximum MAC filter allowed in a packet capture session. |
| optional | cpcMaxIpFilterConfigGroup |
This group is mandatory in devices running software which provides information for maximum IP filter allowed in a packet capture session. |
| optional | cpcSessionPacketRateLimitGroup |
This group is mandatory in devices running software which supports rate limit configuration for packet capture feature. |
| optional | cpcSessionDescrGroup |
This group is mandatory in devices running software which supports description configuration for packet capture feature. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| cpcSessionConfigStatus | readonly | Write access is not required if the managed device has the session entry created by default. |
|
| cpcCaptureSourceIfStatus |
active(1), createAndGo(4), destroy(6)
|
Support of 'createAndWait' are not required. | |
| cpcMacFilterRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of 'createAndWait' are not required. | |
| cpcIpFilterRowStatus |
active(1), createAndGo(4), destroy(6)
|
Support of 'createAndWait' are not required. |