CISCO-OUTAGE-MONITOR-MIB Table View

A table of outage related events generated by this router.
Conceptual row entries are dynamically added into this 
table when outage related events occur.
          
Entries are stored in FIFO order.  When the maximum number 
of entries has been reached in the table, the oldest entry 
in the table is removed immediately.  
          
When a table is reduced to a smaller size N, the oldest
entries are immediately removed from the table leaving 
a maximum of N entries.

cOutageHistoryEntry row .1.3.6.1.4.1.9.9.280.1.2.3.1

This entry contains information about an outage related
event which has been generated by this router.

Indexes

cOutageEventIndex

Column	Syntax	OID
cOutageEventIndex An arbitrary non-zero integer value that uniquely identifies a COutageHistoryEntry in the table. The value of this table starts at '1' and monotonically increases for each object failure and recovery event received …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.280.1.2.3.1.1
cOutageEventObjectType This object specifies the monitored object's type. It comprises interface(1), physicalEntity(2), swProcess(3), remoteObject(4), and logicalEntity(5). The detailed description has been presented above …	OutageMonObjectType Type Values: 1 interface 2 physicalEntity 3 swProcess 4 remoteObject 5 logicalEntity	.1.3.6.1.4.1.9.9.280.1.2.3.1.2
cOutageEventMonObjectIndex This object identifies a specific index of the monitored object based upon the cOutageEventObjectType. If it is interface(1), it correlates the object with ifIndex in ifTable in the IF-MIB. If it is physical…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.280.1.2.3.1.3
cOutageEventTypeIndex The type of outage related event. The value corresponds to an entry in the cOutageEventTypeMapTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.280.1.2.3.1.4
cOutageEventTime This object specifies the date and time of the event was generated. The value of sysUpTime, which is reinitialized during the router boot-up, is not sufficient, since it shall be able to measure the …	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.280.1.2.3.1.5
cOutageEventInterval Object that identifies the time duration between transitions in available state of a component. According to the cOutageEventTypeIndex, If the event type is up, the interval time from the last down time is TTR (Time …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.280.1.2.3.1.6

A table containing information about 
cOutageEventTypeMapIndex value mapping. 
Each conceptual row specifies a unique mapping 
between a cOutageEventTypeMapIndex value, and an 
outage related event type.

cOutageEventTypeMapEntry row .1.3.6.1.4.1.9.9.280.1.3.1.1

A mapping between an event type and an event description.

Indexes

cOutageEventTypeMapIndex

Column	Syntax	OID
cOutageEventTypeMapIndex This object uniquely identifies an event description.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.280.1.3.1.1.1
cOutageEventTypeName The name of the outage related event.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.9.9.280.1.3.1.1.2
cOutageEventTypeDescrText This object specifies a human-readable message describing information about the outage related event.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.280.1.3.1.1.3

A table of monitored object entries generated 
by this router, which include interface, physical 
entry, and software process.
          
The conceptual row entries are initially established
during the monitoring start-up procedure based upon 
configuration set-up. The entries are also dynamically 
added into this table when a new object is detected. 
          
The entry information will be updated, when the outage 
related event occurs.
          
The entry will be removed only by configuration reset.

cOutageObjectEntry row .1.3.6.1.4.1.9.9.280.1.4.1.1

An entry containing outage related information
applicable to a particular measurement object.

Indexes

cOutageObjectType cOutageMonitoredObjectIndex

Column	Syntax	OID
cOutageObjectType This object specifies the monitored object's type. It comprises interface(1), physicalEntity(2), swProcess(3), remoteObject(4), and logicalEntity(5). The detailed description has been presented above …	OutageMonObjectType Type Values: 1 interface 2 physicalEntity 3 swProcess 4 remoteObject 5 logicalEntity	.1.3.6.1.4.1.9.9.280.1.4.1.1.1
cOutageMonitoredObjectIndex This object identifies a specific index of the monitored object based upon the cOutageObjectType. If it is interface(1), it correlates the object with ifIndex in ifTable in the IF-MIB. If it is PhysicalEntit…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.280.1.4.1.1.2
cOutageCurrentStatus The current operational state of the monitored object. The Up(1) state indicates that the monitored object is actively or passively running in the normal condition. The Down(2) state indicates that the monitored obje…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.9.280.1.4.1.1.3
cOutageAOTSinceMeasureStarted The total outage time in second of a component from the beginning of the measurement. The table stores the outage time up to the last recovery event. However, a request comes in during the down status of a componen…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.280.1.4.1.1.4
cOutageNAFSinceMeasureStarted The total number of failure instances from the beginning of the measurement. Every failure event of a component adds 1 to this object.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.280.1.4.1.1.5
cOutageRecordingStartTime This object specifies the date and time of the object to start outage recording. The instance value of this cOutageRecordingStartTime value is initialized to the time when the monitored object is added …	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.280.1.4.1.1.6

A table containing information about
cOutageMonitoredObjectIndex value mapping,
when the cOutageObjectType is swProcess.
Each conceptual row specifies a unique mapping
between a cOutageMonitoredObjectIndex value, and 
cpmCPUTotalIndex and cpmProcessPID in
cpmProcessTable in the CISCO-PROCESS-MIB.

cOutageCpmMapEntry row .1.3.6.1.4.1.9.9.280.1.5.1.1

A mapping between an object index and a pair of cpm indexes.

Indexes

cOutageCpmMapIndex

Column	Syntax	OID
cOutageCpmMapIndex This object uniquely identifies cpmCPUTotalIndex and cpmProcessPID in CISCO-PROCESS-MIB. The cpmCPUTotalIndex is used for the cpmCPUTotalTable reference. A pair of { cpmCPUTotalIndex, cpmProcessPID } is used for the …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.280.1.5.1.1.1
cOutageCpmCPUTotalIndex An index that uniquely represents a CPU in cpmCPUTotalTable in CISCO-PROCESS-MIB.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.280.1.5.1.1.2
cOutageCpmProcessPID This object contains the process ID. It identifies an entry combined with cpmCPUTotalIndex in cpmProcessTable in CISCO-PROCESS-MIB.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.280.1.5.1.1.3

A table containing information about
cOutageMonitoredObjectIndex value mapping,
when the cOutageObjectType is remoteObject.
Each conceptual row specifies a unique mapping
between a cOutageMonitoredObjectIndex value, and
a remote object related information such as the
object ID and the object description. 
Using IP ICMP protocol to monitor the remote object, 
the object ID can be Network Layer Address, which 
has been configured by users via configuration file 
or CLI.

cOutageRemoteObjMapEntry row .1.3.6.1.4.1.9.9.280.1.6.1.1

A mapping between a remote object and a remote object
description.

Indexes

cOutageRemoteObjMapIndex

Column	Syntax	OID
cOutageRemoteObjMapIndex This object uniquely identifies a remote object description.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.280.1.6.1.1.1
cOutageRemoteObjIDType Represents the type of address stored in cOutageRemoteObjID.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.280.1.6.1.1.2
cOutageRemoteObjID This object represents the Network Layer Address of the remote object, which is configured by users via configuration file or CLI. It could be an IP address or DNS depends on users input.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.280.1.6.1.1.3
cOutageRemoteObjDescrText This object specifies a human-readable message describing information about the monitored remote components such as router name or interface name, etc.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.280.1.6.1.1.4

A table containing information about
cOutageMonitoredObjectIndex value mapping,
when the cOutageObjectType is logicalEntity.
Each conceptual row specifies a unique mapping
between a cOutageMonitoredObjectIndex value, and
a logical entity object related information such 
as the object description.

cOutageLogicalObjMapEntry row .1.3.6.1.4.1.9.9.280.1.7.1.1

A mapping between a logical entity object and
a logical entity object description.

Indexes

cOutageLogicalObjMapIndex

Column	Syntax	OID
cOutageLogicalObjMapIndex This object uniquely identifies a logical entity object description.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.280.1.7.1.1.1
cOutageLogicalObjDescrText This object specifies a human-readable message describing a detailed information about the monitored logical entity.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.280.1.7.1.1.2