CISCO-OAM-MIB Table View

A table of OAM loopback request entries.  (This table
is similar to the CISCO-PING-MIB.)

oamLoopbackPingEntry row .1.3.6.1.4.1.9.10.15.1.1.1

A OAM loopback request entry.

A management station wishing to create an entry should
first generate a pseudo-random serial number to be used
as the index to this sparse table. The NMS should
then create th…

Indexes

oamLoopbackPingSerialNumber

Column	Syntax	OID
oamLoopbackPingSerialNumber Object which identifies a unique entry in the oamLoopbackPingTable. A management station wishing to initiate a OAM-loopback operation should use a pseudo-random value for this object when creating or modifying an insta…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.15.1.1.1.1
oamLoopbackPingInterface The interface of the connection on which OAM loopbacks are to be sent. Once an instance of this object is created, its value can not be changed. The value specified for this object must equate to a value of ifIndex in…	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.15.1.1.1.2
oamLoopbackPingVpi The VPI of the connection on which OAM loopbacks are to be sent. Once an instance of this object is created, its value can not be changed.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.9.10.15.1.1.1.3
oamLoopbackPingVci Either -1 or the VCI of the connection on which F5 OAM loopback cells are to be sent. If the value of this object is -1, then an F4 OAM loopback cells will be sent on the VPC indicated by oamLoopbackPingVpi. An instance…	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.9.10.15.1.1.1.4
oamLoopbackPingType The type of OAM loopback to be performed.	Enumerationr/w Enumerated Values: 1 segment 2 end2end	.1.3.6.1.4.1.9.10.15.1.1.1.5
oamLoopbackPingLocation The value to be placed in the 'Loopback Location ID' field of the OAM loopback cell. If this value is less than 16 octets in length, then it will be appended with zero-valued octets to form the required 96-bit value. …	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.9.10.15.1.1.1.6
oamLoopbackPingLocationFlag Specifies what kind of information is embedded into the oamLoopbackPingLocation string. This flag is ignored when oamLoopbackPingType is set to segment.	Enumerationr/w Enumerated Values: 1 ipAddress 2 nsapPrefix 3 fixed16byteValue	.1.3.6.1.4.1.9.10.15.1.1.1.7
oamLoopbackPingCount Specifies the number of OAM loopback cells to send to the target in this sequence.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.10.15.1.1.1.8
oamLoopbackPingTimeout Specifies the amount of time to wait for a response to a transmitted OAM loopback cells before declaring the OAM loopback cells as 'dropped.'	millisecondsInteger32r/w Constraints: range: 0-3600000	.1.3.6.1.4.1.9.10.15.1.1.1.9
oamLoopbackPingDelay Specifies the minimum amount of time to wait before sending the next OAM loopback cell in a sequence after receiving a response or declaring a timeout for a previous OAM cell. The actual delay may be greater due to int…	millisecondsInteger32r/w Constraints: range: 0-3600000	.1.3.6.1.4.1.9.10.15.1.1.1.10
oamLoopbackPingTrapOnCompletion Specifies whether or not a oamLoopbackPingCompletion trap should be issued on completion of the sequence of OAM loopback cells. If such a trap is desired, it is the responsibility of the management entity to ensure that…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.15.1.1.1.11
oamLoopbackPingSentCells The number of OAM loopback cells that have been sent to the target in this sequence.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.15.1.1.1.12
oamLoopbackPingReceivedCells The number of OAM loopback cells that have been received from the target in this sequence.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.15.1.1.1.13
oamLoopbackPingMinRtt The minimum round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback response in a sequence is received.	millisecondsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.10.15.1.1.1.14
oamLoopbackPingAvgRtt The average round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback response in a sequence is received.	millisecondsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.10.15.1.1.1.15
oamLoopbackPingMaxRtt The maximum round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback response in a sequence is received.	millisecondsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.10.15.1.1.1.16
oamLoopbackPingCompleted Set to true when all the OAM loopback cells in this sequence have been either responded to or timed out.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.15.1.1.1.17
oamLoopbackPingEntryOwner The entity that configured this entry.	RMON-MIBOwnerStringr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.9.10.15.1.1.1.18
oamLoopbackPingEntryStatus The status of this table entry. Once the entry status is set to active, the associate entry cannot be modified until the sequence completes (oamLoopbackPingCompleted is true).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.15.1.1.1.19
oamLoopbackPingDir This object set the traveling direction of the OAM segment loopback cells which are injected to the connection endpoint.	CiscoOAMPingDirr/w Type Values: 1 forward 2 backward	.1.3.6.1.4.1.9.10.15.1.1.1.20
oamLoopbackPingOperStatus This object indicates the ping test status.	CiscoOAMPingStatus Type Values: 1 success 2 timeOut 3 resourceNotAvailable 4 aborted 5 inProgress 6 noResponseData 7 failToStart	.1.3.6.1.4.1.9.10.15.1.1.1.21
oamLoopbackPingExecTime The value of sysUpTime when the MIB object is created which triggers the loppback ping test.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.10.15.1.1.1.22
oamLoopbackPingMinRttuSec The minimum round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback response in a sequence is received. …	microsecondsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.10.15.1.1.1.23
oamLoopbackPingAvgRttuSec The average round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback response in a sequence is received. …	microsecondsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.10.15.1.1.1.24
oamLoopbackPingMaxRttuSec The maximum round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback response in a sequence is received. …	microsecondsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.10.15.1.1.1.25

This table contains a list of OAM loopback segment
endpoints.
          
When the endpoint is an OAM segment endpoint, it is able to
send ATM segment loop back cells or loop back the cells to
the originator which initiates the OAM loop back ping test.
          
The provisioning of this table is required if the loopback
ping test type (oamLoopbackPingType) in oamLoopbackPingTable
is 'segment', and the endpoint under test or the remote ping
endpoint is not OAM segment loopback endpoints.

oamLoopbackSegEndPointEntry row .1.3.6.1.4.1.9.10.15.1.2.1

An entry in the segment endpoint table.

Indexes

IF-MIBifIndex oamLoopSegVpi oamLoopSegVci

Column	Syntax	OID
oamLoopSegVpi The VPI value of a VP or VC connection.	Unsigned32 Constraints: range: 0-4095	.1.3.6.1.4.1.9.10.15.1.2.1.1
oamLoopSegVci The VCI value of VC connection. For a VPC connection, the VCI value is 0.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.10.15.1.2.1.2
oamLoopSegRowStatus To create, delete an OAM segment entry. Only the value 'active', 'createAndGo', and 'destroy' are supported. If the connection endpoint does not exist, the entry could not be created. If t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.15.1.2.1.3