oamLoopbackPingEntryStatus
CISCO-OAM-MIB ·
.1.3.6.1.4.1.9.10.15.1.1.1.19
Object
The status of this table entry. Once the entry status is set to active, the associate entry cannot be modified until the sequence completes (oamLoopbackPingCompleted is true).
Context
- MIB
- CISCO-OAM-MIB
- OID
.1.3.6.1.4.1.9.10.15.1.1.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- oamLoopbackPingEntry
- Table
- oamLoopbackPingTable
- Siblings
- 24
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| oamLoopbackPingSerialNumber Object which identifies a unique entry in the
oamLoopbackPingTable. A management station wishing
to initiate a OAM-loopback operation should use a
pseudo-random value for this ob… | column | Integer32 | .1.3.6.1.4.1.9.10.15.1.1.1.1 |
| oamLoopbackPingDelay Specifies the minimum amount of time to wait before sending
the next OAM loopback cell in a sequence after receiving a
response or declaring a timeout for a previous OAM cell. Th… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.10.15.1.1.1.10 |
| oamLoopbackPingTrapOnCompletion Specifies whether or not a oamLoopbackPingCompletion trap
should be issued on completion of the sequence of OAM loopback
cells. If such a trap is desired, it is the responsibility… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.15.1.1.1.11 |
| oamLoopbackPingSentCells The number of OAM loopback cells that have been sent to the
target in this sequence. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.15.1.1.1.12 |
| oamLoopbackPingReceivedCells The number of OAM loopback cells that have been received
from the target in this sequence. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.15.1.1.1.13 |
| oamLoopbackPingMinRtt The minimum round trip time of all the OAM loopback cells
that have been sent in this sequence.
This object will not be created until the first OAM loopback
respons… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.10.15.1.1.1.14 |
| oamLoopbackPingAvgRtt The average round trip time of all the OAM loopback cells
that have been sent in this sequence.
This object will not be created until the first OAM loopback
respons… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.10.15.1.1.1.15 |
| oamLoopbackPingMaxRtt The maximum round trip time of all the OAM loopback cells
that have been sent in this sequence.
This object will not be created until the first OAM loopback
respons… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.10.15.1.1.1.16 |
| oamLoopbackPingCompleted Set to true when all the OAM loopback cells in this sequence
have been either responded to or timed out. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.15.1.1.1.17 |
| oamLoopbackPingEntryOwner The entity that configured this entry. | column | RMON-MIBOwnerString | .1.3.6.1.4.1.9.10.15.1.1.1.18 |
| oamLoopbackPingInterface The interface of the connection on which OAM loopbacks are
to be sent. Once an instance of this object is created, its
value can not be changed. The value specified for this obje… | column | Integer32 | .1.3.6.1.4.1.9.10.15.1.1.1.2 |
| oamLoopbackPingDir This object set the traveling direction of the OAM
segment loopback cells which are injected to the
connection endpoint. | column | CiscoOAMPingDir | .1.3.6.1.4.1.9.10.15.1.1.1.20 |
| oamLoopbackPingOperStatus This object indicates the ping test status. | column | CiscoOAMPingStatus | .1.3.6.1.4.1.9.10.15.1.1.1.21 |
| oamLoopbackPingExecTime The value of sysUpTime when the MIB object
is created which triggers the loppback ping test. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.10.15.1.1.1.22 |
| oamLoopbackPingMinRttuSec The minimum round trip time of all the OAM loopback cells
that have been sent in this sequence.
This object will not be created until the first OAM loopback
respons… | column | microseconds Integer32 | .1.3.6.1.4.1.9.10.15.1.1.1.23 |
| oamLoopbackPingAvgRttuSec The average round trip time of all the OAM loopback cells
that have been sent in this sequence.
This object will not be created until the first OAM loopback
respons… | column | microseconds Integer32 | .1.3.6.1.4.1.9.10.15.1.1.1.24 |
| oamLoopbackPingMaxRttuSec The maximum round trip time of all the OAM loopback cells
that have been sent in this sequence.
This object will not be created until the first OAM loopback
respons… | column | microseconds Integer32 | .1.3.6.1.4.1.9.10.15.1.1.1.25 |
| oamLoopbackPingVpi The VPI of the connection on which OAM loopbacks are
to be sent.
Once an instance of this object is created, its
value can not be changed. | column | Integer32 | .1.3.6.1.4.1.9.10.15.1.1.1.3 |
| oamLoopbackPingVci Either -1 or the VCI of the connection on which F5 OAM
loopback cells are to be sent.
If the value of this object is -1, then an F4 OAM loopback
cells will be sent on the VPC indi… | column | Integer32 | .1.3.6.1.4.1.9.10.15.1.1.1.4 |
| oamLoopbackPingType The type of OAM loopback to be performed. | column | Enumeration | .1.3.6.1.4.1.9.10.15.1.1.1.5 |
| oamLoopbackPingLocation The value to be placed in the 'Loopback Location ID' field
of the OAM loopback cell. If this value is less than 16
octets in length, then it will be appended with zero-valued
oc… | column | OctetString | .1.3.6.1.4.1.9.10.15.1.1.1.6 |
| oamLoopbackPingLocationFlag Specifies what kind of information is embedded into the
oamLoopbackPingLocation string. This flag is ignored when
oamLoopbackPingType is set to segment. | column | Enumeration | .1.3.6.1.4.1.9.10.15.1.1.1.7 |
| oamLoopbackPingCount Specifies the number of OAM loopback cells to send to the
target in this sequence. | column | Integer32 | .1.3.6.1.4.1.9.10.15.1.1.1.8 |
| oamLoopbackPingTimeout Specifies the amount of time to wait for a response to a
transmitted OAM loopback cells before declaring the OAM
loopback cells as 'dropped.' | column | milliseconds Integer32 | .1.3.6.1.4.1.9.10.15.1.1.1.9 |