CISCO-LWAPP-INTERFACE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
35

clInterfaceConfigTable

table
.1.3.6.1.4.1.9.9.686.1.1.1 · 1 row entry · 24 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clInterfaceConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-INTERFACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-INTERFACE-MIB::clInterfaceConfigTable' 
This table represents the configuration of all the
interfaces, both the static and the dynamic 
interfaces, on the Wireless LAN Controller(WLC).
clInterfaceConfigEntry row .1.3.6.1.4.1.9.9.686.1.1.1.1
This object represents an entry in the clInterfaceConfigTable.
Each entry in this corresponds to an interface, indicated by
clInterfaceName.
Indexes
Column Syntax OID
clInterfaceName
This object represents the name of the interface
on the controller.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.686.1.1.1.1.1
clInterfaceWired
This object specifies whether the interface
represented by clInterfaceName, will be used
for the wireless clients that are connected
to the WLC or will be used for the
wired clients connected to the W…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.686.1.1.1.1.2
clInterfaceQuarantineVlanId
This object specifies the quarantine VLAN id
of the interface.
If the value is zero,then it means the interface is
non-quarantine and the client traffic through this interface
need not pass through any security checks.
…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.686.1.1.1.1.3
clInterfaceDhcpOpt82Enabled
This object specifies whether the interface
represented by clInterfaceName, has DHCP Option 82
enabled on it or not.
A value of 'true' indicates that, DHCP option 82 is
enabled for this interface.
A value of 'false' in…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.686.1.1.1.1.4
clInterfaceDhcpProxyMode
This object specifies DHCP proxy mode on the
interface, which overrides the global DHCP proxy
mode. There are three modes as below:
A value of global indicates that, use the global
DHCP proxy mode on WLC.
A value of en…
Enumerationr/w
Enumerated Values:
0global
1enabled
2disabled
 .1.3.6.1.4.1.9.9.686.1.1.1.1.5
clInterfaceMdnsProfileName
This object specifies the name of the MDNS
profile added on the Interface.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.686.1.1.1.1.6
clInterfaceNasId
This object specifies the NAS-ID of the interface.
NAS-ID string is sent to radius server by WLC (as
radius client) via authentication request, which
can be used to classify users to different groups
then radius serv…
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.9.9.686.1.1.1.1.7
clInterfaceMappingRedPort
This object specifies whether the interface
represented by clInterfaceName, has mapping to redundancy
port.
A value of 'true' indicates that, redundancy port mapped
to interface.
A value of 'false' indicates that, redu…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.686.1.1.1.1.8
clInterfacePrimaryIPv6AddrType
This object specifies the address type of
the interface.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.686.1.1.1.1.9
clInterfacePrimaryIPv6Addr
This object specifies address of the interface.
This parameter depends on prefix length and IPv6 gate
way address. All these parameters need to be set
together.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.686.1.1.1.1.10
clInterfacePrimaryPrefixLen
This object specifies the prefix length for interface
Ipv6 address. This parameter should be set along
with the primary IPv6 address
Unsigned32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.9.9.686.1.1.1.1.11
clInterfacePrimaryIPv6GatewayType
This object specifies gateway address type of the
interface.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.686.1.1.1.1.12
clInterfacePrimaryIPv6Gateway
This object specifies gateway address of the interface.
This parameter should be set along with the IPv6 primary
address.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.686.1.1.1.1.13
clInterfaceIPv6AclName
This object specifies name of the IPV6 ACL
applied to the interface. This attribute is
applicable only to the management interface and other
dynamic interfaces. If it is required to remove the
ACL name for an interfa…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.9.686.1.1.1.1.14
clInterfaceLinkLocalIDType
This object represents link local address type
of the interface.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.686.1.1.1.1.15
clInterfaceLinkLocalID
This object represents link local address
of the interface.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.686.1.1.1.1.16
clInterfaceIPv6SLAAC
This object specifies the stateless address auto
configuration(SLAAC) status of the interface.
This applies only to the service port interface.
A value of 'true' indicates that, SLAAC for the
interface is enabled.
A…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.686.1.1.1.1.17
clInterfaceLinkSelectEnabled
This object specifies whether the interface
represented by clInterfaceName, has DHCP option 82
link select enabled or disabled.
A value of 'true' indicates that, DHCP option 82
link select is enabled.
A value of 'fals…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.686.1.1.1.1.18
clInterfaceLinkSelectRelaySrcIntf
This object specifies the name of the source
interface for DHCP opt82 link select.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.686.1.1.1.1.19
clInterfaceVpnSelectEnabled
This object specifies whether the interface
represented by clInterfaceName, has DHCP option 82
VPN select enabled or disabled.
A value of 'true' indicates that, DHCP option 82
VPN select is enabled.
A value of 'false'…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.686.1.1.1.1.20
clInterfaceVpnSelectVpnId
This object specifies the Vpn Id of DHCP option 82 for
VPN select, The VPN-ID is sequence of 7 octets,
3 octet VPN authority organizationally unique identifier,
followed by 4 octet VPN index identifying VPN according
t…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.686.1.1.1.1.21
clInterfaceVpnselectVrfName
This object specifies the DHCP opt 82
VrfName for the VPN Select.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.686.1.1.1.1.22
clInterfacePrimaryIpv6AddrStatus
This object represents the uniqueness of IPv6 address
assigned status.
A value of none(1) indicates that, assigned status is none,
A value of creating(2)indicates that, assigned status is
creating,
A value of tentativ…
Enumeration
Enumerated Values:
1none
2creating
3tentative
4incomplete
5verify
6reachable
7stale
8down
9unknown
10dad
 .1.3.6.1.4.1.9.9.686.1.1.1.1.23
clInterfaceLinkLocalIpv6AddrStatus
This objest represents the uniqueness of link local IPv6
address assigned status
A value of none(1) indicates that, assigned status is none,
A value of creating(2)indicates that, assigned status is
creating,
A value of…
Enumeration
Enumerated Values:
1none
2creating
3tentative
4incomplete
5verify
6reachable
7stale
8down
9unknown
10dad
 .1.3.6.1.4.1.9.9.686.1.1.1.1.24

clInterfaceGroupsConfigTable

table
.1.3.6.1.4.1.9.9.686.1.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clInterfaceGroupsConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-INTERFACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-INTERFACE-MIB::clInterfaceGroupsConfigTable' 
This table is used to maintain the interface groups.
An interface group is a logical grouping of interfaces 
with unique VLAN ids.
clInterfaceGroupsConfigEntry row .1.3.6.1.4.1.9.9.686.1.1.2.1
This object represents an entry in
clInterfaceGroupsConfigTable. Entries can be added
or deleted by explicit management action by NMS
or by user console.
Indexes
Column Syntax OID
clInterfaceGroupName
This object represents the name
assigned to identify the interface group.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.686.1.1.2.1.1
clInterfaceGroupDescr
This object specifies the description of interface
group.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.686.1.1.2.1.2
clInterfaceGroupIsQuarantine
This object represents whether the interface group
has quarantine interfaces.
A value of 'true' indicates that, the interface group
has quarantine interfaces.
A value of 'false' indicates that, the group has
nonquar…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.686.1.1.2.1.3
clInterfaceGroupRowStatus
This object represents status column for this row
and used to create and delete specific instances
of rows in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.686.1.1.2.1.4
clInterfaceGroupMdnsProfileName
This object specifies the name of the MDNS
profile added on the interface group.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.686.1.1.2.1.5
clInterfaceGroupFailDetectMode
This object specifies the mode of failure detection
(dirty interface logic)in the interface group when a client
fails to get an IP address from a VLAN.
'aggressive' - mark an interface dirty if three
failure attempts…
Enumerationr/w
Enumerated Values:
0aggressive
1nonaggressive
 .1.3.6.1.4.1.9.9.686.1.1.2.1.6

clInterfaceGroupsMappingTable

table
.1.3.6.1.4.1.9.9.686.1.1.3 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk clInterfaceGroupsMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-INTERFACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-INTERFACE-MIB::clInterfaceGroupsMappingTable' 
This table represents the mapping between the interface
and the interface group.
clInterfaceGroupsMappingEntry row .1.3.6.1.4.1.9.9.686.1.1.3.1
This object represents an entry in
clInterfaceGroupsMappingTable. Each entry in this
can be added or deleted by explicit management action
by NMS or by user console.
Indexes
Column Syntax OID
clInterfaceGroupMappingRowStatus
This object represents status column for this row
and used to create and delete specific instances
of rows in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.686.1.1.3.1.1

cLInterfaceTable

table
.1.3.6.1.4.1.9.9.686.1.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cLInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-LWAPP-INTERFACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-LWAPP-INTERFACE-MIB::cLInterfaceTable' 
This table represents the information about all the
interfaces, both the static and the dynamic interfaces, 
on the Wireless LAN Controller(WLC).
cLInterfaceEntry row .1.3.6.1.4.1.9.9.686.1.2.1.1
Each entry in this table provides information about
one interface on the WLC.
Indexes
Column Syntax OID
cLInterfacePreviousAddressType
This object represents the previous type of
the interface's address on the controller.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.686.1.2.1.1.1
cLInterfacePreviousAddress
This object represents the previous address of
the interface on the controller.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.686.1.2.1.1.2
cLInterfaceCurrentAddressType
This object represents the current type of
the interface's address on the controller.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.686.1.2.1.1.3
cLInterfaceCurrentAddress
This object represents the current address of
the interface on the controller.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.686.1.2.1.1.4