clInterfaceWired

CISCO-LWAPP-INTERFACE-MIB · .1.3.6.1.4.1.9.9.686.1.1.1.1.2
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
This object specifies whether the interface
represented by clInterfaceName, will be used
for the wireless clients that are connected
to the WLC or will be used for the                   
wired clients connected to the WLC.
A value of 'true' indicates that, wired clients 
will be connected to this interface.
A value of 'false' indicates that, wireless 
clients will be connected to this interface.

Context

MIB
CISCO-LWAPP-INTERFACE-MIB
OID
.1.3.6.1.4.1.9.9.686.1.1.1.1.2
Type
column
Access
readwrite
Status
current
Parent
clInterfaceConfigEntry
Table
clInterfaceConfigTable
Siblings
23

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
clInterfaceName
This object represents the name of the interface on the controller.
columnOctetString.1.3.6.1.4.1.9.9.686.1.1.1.1.1
clInterfacePrimaryIPv6Addr
This object specifies address of the interface. This parameter depends on prefix length and IPv6 gate way address. All these parameters need to be set together.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.686.1.1.1.1.10
clInterfacePrimaryPrefixLen
This object specifies the prefix length for interface Ipv6 address. This parameter should be set along with the primary IPv6 address
columnUnsigned32.1.3.6.1.4.1.9.9.686.1.1.1.1.11
clInterfacePrimaryIPv6GatewayType
This object specifies gateway address type of the interface.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.686.1.1.1.1.12
clInterfacePrimaryIPv6Gateway
This object specifies gateway address of the interface. This parameter should be set along with the IPv6 primary address.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.686.1.1.1.1.13
clInterfaceIPv6AclName
This object specifies name of the IPV6 ACL applied to the interface. This attribute is applicable only to the management interface and other dynamic interfaces. If it is require…
columnOctetString.1.3.6.1.4.1.9.9.686.1.1.1.1.14
clInterfaceLinkLocalIDType
This object represents link local address type of the interface.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.686.1.1.1.1.15
clInterfaceLinkLocalID
This object represents link local address of the interface.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.686.1.1.1.1.16
clInterfaceIPv6SLAAC
This object specifies the stateless address auto configuration(SLAAC) status of the interface. This applies only to the service port interface. A value of 'true' indicates that, …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.686.1.1.1.1.17
clInterfaceLinkSelectEnabled
This object specifies whether the interface represented by clInterfaceName, has DHCP option 82 link select enabled or disabled. A value of 'true' indicates that, DHCP option 82 l…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.686.1.1.1.1.18
clInterfaceLinkSelectRelaySrcIntf
This object specifies the name of the source interface for DHCP opt82 link select.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.686.1.1.1.1.19
clInterfaceVpnSelectEnabled
This object specifies whether the interface represented by clInterfaceName, has DHCP option 82 VPN select enabled or disabled. A value of 'true' indicates that, DHCP option 82 VP…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.686.1.1.1.1.20
clInterfaceVpnSelectVpnId
This object specifies the Vpn Id of DHCP option 82 for VPN select, The VPN-ID is sequence of 7 octets, 3 octet VPN authority organizationally unique identifier, followed by 4 octe…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.686.1.1.1.1.21
clInterfaceVpnselectVrfName
This object specifies the DHCP opt 82 VrfName for the VPN Select.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.686.1.1.1.1.22
clInterfacePrimaryIpv6AddrStatus
This object represents the uniqueness of IPv6 address assigned status. A value of none(1) indicates that, assigned status is none, A value of creating(2)indicates that, assigned …
columnEnumeration.1.3.6.1.4.1.9.9.686.1.1.1.1.23
clInterfaceLinkLocalIpv6AddrStatus
This objest represents the uniqueness of link local IPv6 address assigned status A value of none(1) indicates that, assigned status is none, A value of creating(2)indicates that, …
columnEnumeration.1.3.6.1.4.1.9.9.686.1.1.1.1.24
clInterfaceQuarantineVlanId
This object specifies the quarantine VLAN id of the interface. If the value is zero,then it means the interface is non-quarantine and the client traffic through this interface nee…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.686.1.1.1.1.3
clInterfaceDhcpOpt82Enabled
This object specifies whether the interface represented by clInterfaceName, has DHCP Option 82 enabled on it or not. A value of 'true' indicates that, DHCP option 82 is enabled f…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.686.1.1.1.1.4
clInterfaceDhcpProxyMode
This object specifies DHCP proxy mode on the interface, which overrides the global DHCP proxy mode. There are three modes as below: A value of global indicates that, use the globa…
columnEnumeration.1.3.6.1.4.1.9.9.686.1.1.1.1.5
clInterfaceMdnsProfileName
This object specifies the name of the MDNS profile added on the Interface.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.686.1.1.1.1.6
clInterfaceNasId
This object specifies the NAS-ID of the interface. NAS-ID string is sent to radius server by WLC (as radius client) via authentication request, which can be used to classify use…
columnOctetString.1.3.6.1.4.1.9.9.686.1.1.1.1.7
clInterfaceMappingRedPort
This object specifies whether the interface represented by clInterfaceName, has mapping to redundancy port. A value of 'true' indicates that, redundancy port mapped to interface.…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.686.1.1.1.1.8
clInterfacePrimaryIPv6AddrType
This object specifies the address type of the interface.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.686.1.1.1.1.9