clInterfacePrimaryIPv6AddrType
CISCO-LWAPP-INTERFACE-MIB ·
.1.3.6.1.4.1.9.9.686.1.1.1.1.9
Object
This object specifies the address type of the interface.
Context
- MIB
- CISCO-LWAPP-INTERFACE-MIB
- OID
.1.3.6.1.4.1.9.9.686.1.1.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- clInterfaceConfigEntry
- Table
- clInterfaceConfigTable
- Siblings
- 23
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clInterfaceName This object represents the name of the interface
on the controller. | column | OctetString | .1.3.6.1.4.1.9.9.686.1.1.1.1.1 |
| clInterfacePrimaryIPv6Addr This object specifies address of the interface.
This parameter depends on prefix length and IPv6 gate
way address. All these parameters need to be set
together. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.686.1.1.1.1.10 |
| clInterfacePrimaryPrefixLen This object specifies the prefix length for interface
Ipv6 address. This parameter should be set along
with the primary IPv6 address | column | Unsigned32 | .1.3.6.1.4.1.9.9.686.1.1.1.1.11 |
| clInterfacePrimaryIPv6GatewayType This object specifies gateway address type of the
interface. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.686.1.1.1.1.12 |
| clInterfacePrimaryIPv6Gateway This object specifies gateway address of the interface.
This parameter should be set along with the IPv6 primary
address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.686.1.1.1.1.13 |
| clInterfaceIPv6AclName This object specifies name of the IPV6 ACL
applied to the interface. This attribute is
applicable only to the management interface and other
dynamic interfaces. If it is require… | column | OctetString | .1.3.6.1.4.1.9.9.686.1.1.1.1.14 |
| clInterfaceLinkLocalIDType This object represents link local address type
of the interface. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.686.1.1.1.1.15 |
| clInterfaceLinkLocalID This object represents link local address
of the interface. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.686.1.1.1.1.16 |
| clInterfaceIPv6SLAAC This object specifies the stateless address auto
configuration(SLAAC) status of the interface.
This applies only to the service port interface.
A value of 'true' indicates that, … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.686.1.1.1.1.17 |
| clInterfaceLinkSelectEnabled This object specifies whether the interface
represented by clInterfaceName, has DHCP option 82
link select enabled or disabled.
A value of 'true' indicates that, DHCP option 82
l… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.686.1.1.1.1.18 |
| clInterfaceLinkSelectRelaySrcIntf This object specifies the name of the source
interface for DHCP opt82 link select. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.686.1.1.1.1.19 |
| clInterfaceWired This object specifies whether the interface
represented by clInterfaceName, will be used
for the wireless clients that are connected
to the WLC or will be used for the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.686.1.1.1.1.2 |
| clInterfaceVpnSelectEnabled This object specifies whether the interface
represented by clInterfaceName, has DHCP option 82
VPN select enabled or disabled.
A value of 'true' indicates that, DHCP option 82
VP… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.686.1.1.1.1.20 |
| clInterfaceVpnSelectVpnId This object specifies the Vpn Id of DHCP option 82 for
VPN select, The VPN-ID is sequence of 7 octets,
3 octet VPN authority organizationally unique identifier,
followed by 4 octe… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.686.1.1.1.1.21 |
| clInterfaceVpnselectVrfName This object specifies the DHCP opt 82
VrfName for the VPN Select. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.686.1.1.1.1.22 |
| clInterfacePrimaryIpv6AddrStatus This object represents the uniqueness of IPv6 address
assigned status.
A value of none(1) indicates that, assigned status is none,
A value of creating(2)indicates that, assigned … | column | Enumeration | .1.3.6.1.4.1.9.9.686.1.1.1.1.23 |
| clInterfaceLinkLocalIpv6AddrStatus This objest represents the uniqueness of link local IPv6
address assigned status
A value of none(1) indicates that, assigned status is none,
A value of creating(2)indicates that, … | column | Enumeration | .1.3.6.1.4.1.9.9.686.1.1.1.1.24 |
| clInterfaceQuarantineVlanId This object specifies the quarantine VLAN id
of the interface.
If the value is zero,then it means the interface is
non-quarantine and the client traffic through this interface
nee… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.686.1.1.1.1.3 |
| clInterfaceDhcpOpt82Enabled This object specifies whether the interface
represented by clInterfaceName, has DHCP Option 82
enabled on it or not.
A value of 'true' indicates that, DHCP option 82 is
enabled f… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.686.1.1.1.1.4 |
| clInterfaceDhcpProxyMode This object specifies DHCP proxy mode on the
interface, which overrides the global DHCP proxy
mode. There are three modes as below:
A value of global indicates that, use the globa… | column | Enumeration | .1.3.6.1.4.1.9.9.686.1.1.1.1.5 |
| clInterfaceMdnsProfileName This object specifies the name of the MDNS
profile added on the Interface. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.686.1.1.1.1.6 |
| clInterfaceNasId This object specifies the NAS-ID of the interface.
NAS-ID string is sent to radius server by WLC (as
radius client) via authentication request, which
can be used to classify use… | column | OctetString | .1.3.6.1.4.1.9.9.686.1.1.1.1.7 |
| clInterfaceMappingRedPort This object specifies whether the interface
represented by clInterfaceName, has mapping to redundancy
port.
A value of 'true' indicates that, redundancy port mapped
to interface.… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.686.1.1.1.1.8 |