CISCO-LES-MIB Table View

A (conceptual) table containing all instances of LESs
on this device.

lesEntry row .1.3.6.1.4.1.9.9.39.1.1.1.1

An entry (conceptual row) in the lesTable.

Indexes

lesElanName lesIndex

Column	Syntax	OID
lesElanName The name associated with the emulated LAN which this LES services.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.9.9.39.1.1.1.1.1
lesIndex A unique identifier for this LES servicing this ELAN. This value must remain constant while the entry is in existence and during the operation of the agent (i.e. It is allowed to change after reboot). For i…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.39.1.1.1.1.2
lesAtmAddrSpec The ATM address of the designated LES. Note that setting this object will have the side effect of reinitializing the LES and consequently dropping all clients connected to it. If this object is not s…	LAN-EMULATION-CLIENT-MIBAtmLaneAddressr/w Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.39.1.1.1.1.3
lesAtmAddrMask An address mask that when used with the lesAtmAddrSpec specifies the portion of the LES' ATM address that is desired to be configured. Note that setting this object will result in the re…	OctetStringr/w Constraints: range: 0-0 range: 20-20	.1.3.6.1.4.1.9.9.39.1.1.1.1.4
lesAtmAddrActual The resultant ATM address in use by the LES. This object is a product of the specified ATM address, mask and interaction with the switch via the ILMI.	LAN-EMULATION-CLIENT-MIBAtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.39.1.1.1.1.5
lesIfIndex The interface that a LES will receive control connections on. The value specified for this object must equate to a value of ifIndex in the ifTable. The interface will be for that particular ATM port (the physical inte…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.39.1.1.1.1.6
lesSubIfNum Specifies the sub-interface number that the LES will reside on. This sub-interface may be shared with a LEC or BUS of the same ELAN but is not required to do so. If no value is specified for this object at r…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.39.1.1.1.1.7
lesColocBusAtmAddrSpec For those implementations who do not allow the separate creation/deletion of the LES and BUS this object allows the operator to specify the ATM address of the BUS at LES creation time. For implementations t…	LAN-EMULATION-CLIENT-MIBAtmLaneAddressr/w Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.39.1.1.1.1.8
lesColocBusAtmAddrMask An address mask that when used with the lesColocatedBusAtmAddr specifies the portion of the BUS' ATM address desired by management. Note that setting this object will have the side effect of re…	OctetStringr/w Constraints: range: 0-0 range: 20-20	.1.3.6.1.4.1.9.9.39.1.1.1.1.9
lesColocBusAtmAddrActl The ATM address in use by the BUS. This object is a product of the specified ATM address, its mask and interaction with the switch through the ILMI.	LAN-EMULATION-CLIENT-MIBAtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.39.1.1.1.1.10
lesUpTime The value of sysUpTime when this LES became activated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.39.1.1.1.1.11
lesLanType The type of legacy LAN that this LES emulates.	Enumerationr/w Enumerated Values: 1 dot3 2 dot5	.1.3.6.1.4.1.9.9.39.1.1.1.1.12
lesMaxFrm The maximum frame size that the specified LAN type can accept.	Enumerationr/w Enumerated Values: 1516 dot3 4544 tr4Mb 9234 rfc1626 18190 tr16Mb	.1.3.6.1.4.1.9.9.39.1.1.1.1.13
lesJoinTimeout The number of seconds that must elapse before a Join request can be timed-out.	secondsInteger32r/w Constraints: range: 10-300	.1.3.6.1.4.1.9.9.39.1.1.1.1.14
lesLecsAtmAddr The ATM address associated with the LECS used by this LES. If no LECS is in use by the LES then this object will have the value of all 0's (i.e 0x0000...). If it is desired that the LES get the address of the L…	LAN-EMULATION-CLIENT-MIBAtmLaneAddressr/w Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.39.1.1.1.1.15
lesControlDistVpi The virtual path identifier of the control distribute VCC to all clients, if it exits.	CISCO-BUS-MIBCiscoVpiInteger Type Constraints: range: -1..255	.1.3.6.1.4.1.9.9.39.1.1.1.1.16
lesControlDistVci The virtual channel identifier of the control distribute VCC to all clients, if it exists.	CISCO-BUS-MIBCiscoVciInteger Type Constraints: range: -1..65535	.1.3.6.1.4.1.9.9.39.1.1.1.1.17
lesOperStatus This object reflects the actual state of the LES which may differ from that of the lesAdminStatus object. This can occur when the interface ifOperStatus is 'down' but the corresponding l…	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.9.9.39.1.1.1.1.18
lesAdminStatus The desired state of the designated LES as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being reflected in the lesOperStatus.	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.9.9.39.1.1.1.1.19
lesStatus The status of this entry (conceptual row). This row cannot be set to active until an appropiate value of lesIfIndex has been specified.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.39.1.1.1.1.20
lesSegmentID The segment ID of the emulated LAN this LES is servicing. This object is only valid if the lesLanType is dot5(2).	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.39.1.1.1.1.21

A (conceptual) table of statistics associated with
LES instances on the device.

lesStatsEntry row .1.3.6.1.4.1.9.9.39.1.1.2.1

A (conceptual) row in the lesStatsTable which
corresponds to the statistics kept by a particular
instance of a LES.

Indexes

lesElanName lesIndex

Column	Syntax	OID
lesInErrors The number of frames received by the LES which were either malformed or did not follow standard protocol (i.e. receiving a LE-ARP request for a multicast address).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.1
lesInErrorLastLec The ATM address of the LE client whose last frame to the LES resulted in an increment to the lesInErrors counter.	LAN-EMULATION-CLIENT-MIBAtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.39.1.1.2.1.2
lesInFlushReplies The number of Flush replies that have been received by the LES and forwarded onto its clients.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.3
lesInJoinReqs The number of LE_JOIN_REQUESTs received by this LES since activation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.4
lesOutJoinFails The number of rejection LE_JOIN_RESPONSEs transmitted by this LES since activation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.5
lesJoinLastFailCause The cause for the transmission of the last rejection LE_JOIN_RESPONSE. This is the value of the status field within the rejection response. If the server has never issued a rejection response then this object w…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.39.1.1.2.1.6
lesJoinLastFailLec The ATM address of the client whose last LE_JOIN_REQUEST resulted in a rejection by this server. If the server has never issued a rejection response then this object will have the value of all 0's…	LAN-EMULATION-CLIENT-MIBAtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.39.1.1.2.1.7
lesOutConfigReqs The number of LE_CONFIGURE_REQUESTs sent by this LES since activation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.8
lesInConfigResps The number of successful LE_CONFIGURE_RESPONSEs received by this LES since activation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.9
lesInConfigFails The number of rejection LE_CONFIGURE_RESPONSEs received by this LES since activation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.10
lesInRegisReqs The number of LE_REGISTER_REQUESTs received by this LES since activation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.11
lesOutRegisFails The number of rejection LE_REGISTER_RESPONSEs transmitted by this LES since activation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.12
lesRegisLastFailCause The cause for the transmission of the last rejection LE_REGISTER_RESPONSE. This variable has the value of the status field within the last failure register response. If the server has never issued a failed r…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.39.1.1.2.1.13
lesRegisLastFailLec The ATM address of the client whose last LE_REGISTER_REQUEST to this LES resulted in failure. If the server has never issued a failed registration response then the value of this object shall be all 0's…	LAN-EMULATION-CLIENT-MIBAtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.39.1.1.2.1.14
lesInUnregReqs The number of valid LE_UNREGISTER_REQUESTs received by this LES since activation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.15
lesInLearpUcasts The number of LE_ARP_REQUESTs received by this LES since activation and responded to directly. This applies to all LE_ARP requests for addresses registered by LE clients with the LES. Note that a LES…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.16
lesInLearpBroadcasts The number of LE_ARP_REQUEST received by the LES for the broadcast address. These requests are responded to with the BUS' ATM address.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.17
lesOutLearpFwd The number of LE_ARP_REQUEST frames forwarded onto the control distribute VC.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.18
lesInLearpResps The number of LE_ARP_RESPONSEs received by this LES and forwarded onto the control distribute.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.19
lesInNarpReqs The number of Negative LE_ARP requests received by this LES and forwarded on to the control distribute VC.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.20
lesInTopolReqs The number of LE_TOPOLOGY_REQUESTs received by this LES since activation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.39.1.1.2.1.21

A (conceptual) table listing the clients associated
with a LES.  Note that the local or network management
will not create or destroy rows in this table but
may only inspect what LECs are currently joined
with the LES.

lesClientEntry row .1.3.6.1.4.1.9.9.39.1.2.1.1

An entry (conceptual) row that denotes a client that
is joined with the LES.

Indexes

lesElanName lesIndex lesClientLecid

Column	Syntax	OID
lesClientLecid The LECID selected for an LEC by the LES during the JOIN phase.	Integer32 Constraints: range: 1-65279	.1.3.6.1.4.1.9.9.39.1.2.1.1.1
lesClientAtmAddr The primary ATM address associated with the designated LEC.	LAN-EMULATION-CLIENT-MIBAtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.39.1.2.1.1.2
lesClientState The current state of the LEC. Note that busConnect is only a monitorable state if the BUS is colocated with the LES. In the event that it is not then the client state should proceed immediately to operational within …	Enumeration Enumerated Values: 1 connected 2 joinRecv 3 verify 4 addLec 5 busConnect 6 operational 7 terminating	.1.3.6.1.4.1.9.9.39.1.2.1.1.3
lesClientIfIndex The interface of the bi-directional control direct connection between the LEC and LES.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.39.1.2.1.1.4
lesClientControlVpi The VPI of the bi-directional control direct connection between the LEC and LES.	CISCO-BUS-MIBCiscoVpiInteger Type Constraints: range: -1..255	.1.3.6.1.4.1.9.9.39.1.2.1.1.5
lesClientControlVci The VCI of the bi-directional control direct connection between the LEC and LES.	CISCO-BUS-MIBCiscoVciInteger Type Constraints: range: -1..65535	.1.3.6.1.4.1.9.9.39.1.2.1.1.6
lesClientStatus The status of the (conceptual) row. Note that this object may only return the active(1) state. The only value which may be written to this object is the destroy(6) state which will cause the client to be dropped from …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.39.1.2.1.1.7

A (conceptual) table of MAC addresses registered with the LES
by its clients.

lesMacRegEntry row .1.3.6.1.4.1.9.9.39.1.3.1.1

An entry (conceptual row) that denotes a registered
MAC address and the ATM address that corresponds to it.

Indexes

lesElanName lesIndex lesMacRegMacAddress

Column	Syntax	OID
lesMacRegMacAddress The MAC address of a registered client.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.39.1.3.1.1.1
lesMacRegAtmAddr The ATM address of the LEC that corresponds to the registered MAC address.	LAN-EMULATION-CLIENT-MIBAtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.39.1.3.1.1.3
lesMacRegLecid The LECID of the client who registered the designated MAC address.	Integer32 Constraints: range: 1-65279	.1.3.6.1.4.1.9.9.39.1.3.1.1.4

A (conceptual) table of Route Descriptors registered
with the LES by its clients.

lesRDRegEntry row .1.3.6.1.4.1.9.9.39.1.3.2.1

An entry (conceptual row) that denotes a registered
Route Descriptor address and the ATM address that
corresponds to it.

Indexes

lesElanName lesIndex lesRDRegSegmentId lesRDRegBridgeNum

Column	Syntax	OID
lesRDRegSegmentId The segment ID of a registered client.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.39.1.3.2.1.1
lesRDRegBridgeNum The bridge number of a registered client going to the designated segment.	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.9.9.39.1.3.2.1.2
lesRDRegAtmAddr The ATM address of the LEC that corresponds to the registered Route Descriptor.	LAN-EMULATION-CLIENT-MIBAtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.39.1.3.2.1.3
lesRDRegLecid The LECID of the client who registered the designated Route Descriptor address.	Integer32 Constraints: range: 1-65279	.1.3.6.1.4.1.9.9.39.1.3.2.1.4