Standard view Table view

CISCO-BUS-MIB

         The MIB module for the management of LANE broadcast and 
unknown servers.
Source file
CISCO-BUS-MIB
Last revised
Identity
ciscoBusMIB
Base OID
1.3.6.1.4.1.9.9.40
Imported Objects
CISCO-SMI ciscoMgmt
LAN-EMULATION-CLIENT-MIB AtmLaneAddress
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TC DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-BUS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-BUS-MIB::ciscoBusMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-BUS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-BUS-MIB::ciscoBusMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (34)
ciscoBusMIB
.1.3.6.1.4.1.9.9.40
ciscoBusMIBObjects
.1.3.6.1.4.1.9.9.40.1
busTable
.1.3.6.1.4.1.9.9.40.1.1
busEntry
busElanNamebusIndex
 .1.3.6.1.4.1.9.9.40.1.1.1
busElanName
OctetString
 .1.3.6.1.4.1.9.9.40.1.1.1.1
busMaxFrm r/w
Enumeration
 .1.3.6.1.4.1.9.9.40.1.1.1.10
busMaxFrmAge r/w
secondsInteger32
 .1.3.6.1.4.1.9.9.40.1.1.1.11
busOutFwdOctets
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.40.1.1.1.12
busOutFwdUcastFrms
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.40.1.1.1.13
busOutFwdNUcastFrms
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.40.1.1.1.14
busFrmTimeOuts
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.40.1.1.1.15
busMultiFwdVpi
CiscoVpiInteger
 .1.3.6.1.4.1.9.9.40.1.1.1.16
busMultiFwdVci
CiscoVciInteger
 .1.3.6.1.4.1.9.9.40.1.1.1.17
busOperStatus
Enumeration
 .1.3.6.1.4.1.9.9.40.1.1.1.18
busAdminStatus r/w
Enumeration
 .1.3.6.1.4.1.9.9.40.1.1.1.19
busIndex
Integer32
 .1.3.6.1.4.1.9.9.40.1.1.1.2
busStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.9.40.1.1.1.20
busAtmAddrSpec r/w
LAN-EMULATION-CLIENT-MIBAtmLaneAddress
 .1.3.6.1.4.1.9.9.40.1.1.1.3
busAtmAddrMask r/w
OctetString
 .1.3.6.1.4.1.9.9.40.1.1.1.4
busAtmAddrActl
LAN-EMULATION-CLIENT-MIBAtmLaneAddress
 .1.3.6.1.4.1.9.9.40.1.1.1.5
busIfIndex r/w
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.9.9.40.1.1.1.6
busSubIfNum r/w
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.9.9.40.1.1.1.7
busUpTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.9.9.40.1.1.1.8
busLanType r/w
Enumeration
 .1.3.6.1.4.1.9.9.40.1.1.1.9
busClientTable
.1.3.6.1.4.1.9.9.40.1.2
busClientEntry
busElanNamebusIndexbusClientId
 .1.3.6.1.4.1.9.9.40.1.2.1
busClientId
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.9.9.40.1.2.1.1
busClientIfIndex
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.9.9.40.1.2.1.2
busClientMSendVpi
CiscoVpiInteger
 .1.3.6.1.4.1.9.9.40.1.2.1.3
busClientMSendVci
CiscoVciInteger
 .1.3.6.1.4.1.9.9.40.1.2.1.4
busClientAtmAddress
LAN-EMULATION-CLIENT-MIBAtmLaneAddress
 .1.3.6.1.4.1.9.9.40.1.2.1.5
ciscoBusMIBConformance
.1.3.6.1.4.1.9.9.40.2
ciscoBusMIBGroups
.1.3.6.1.4.1.9.9.40.2.1
ciscoBusMIBCompliances
.1.3.6.1.4.1.9.9.40.2.2
Dependencies (9) 5 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. RFC-1212rfc
  6. RFC1155-SMIrfc
  7. RFC1213-MIBrfc
  8. SNMPv2-CONFrfc
  9. LAN-EMULATION-CLIENT-MIBcisco
  10. CISCO-BUS-MIBciscoselected
Type Definitions (2)
CiscoVciInteger
Integer32 range: -1..65535
CiscoVpiInteger
Integer32 range: -1..255
Conformance Groups (3)
ciscoBusGroup
busAtmAddrSpec busAtmAddrMask busAtmAddrActl busIfIndex busUpTime busLanType busMaxFrm busMaxFrmAge busOutFwdOctets busOutFwdUcastFrms busOutFwdNUcastFrms busFrmTimeOuts busMultiFwdVpi busMultiFwdVci busOperStatus busAdminStatus busStatus
A collection of objects for the managing of BUS operation.
 .1.3.6.1.4.1.9.9.40.2.1.1
ciscoBusSubIfGroup
busSubIfNum
For those implementations that wish to tie their LE service
components to an aflane_802x ifIndex.
 .1.3.6.1.4.1.9.9.40.2.1.2
ciscoBusClientGroup
busClientIfIndex busClientMSendVpi busClientMSendVci busClientAtmAddress
A collection of objects for the identification of a
BUS's multicast send VCs.
 .1.3.6.1.4.1.9.9.40.2.1.3
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.40.2.2.1
The compliance statement for SNMP entities that support
Cisco's BUS MIB.
Required groups
mandatory ciscoBusGroup
optional ciscoBusSubIfGroup The group of objects necessary to allow multiple LANE
components to share a common ifIndex.
Object refinements
ObjectAccessSyntaxDescription
busAtmAddrSpec readonly
Those implementations that do not support separately
configured broadcast/unknown and LAN emulation servers
are not required to provide write access to the
busAtmAddrSpec object.
busAtmAddrMask readonly
Those implementations that do not support separately
configured broadcast/unknown and LAN emulation servers
are not required to provide write access to the
busAtmAddrMask object.
busIfIndex readonly
Those implementations that do not support separately
configured broadcast/unknown and LAN emulation servers
are not required to provide write access to the
busIfIndex object.
busSubIfNum readonly
Those implementations that do not support separately
configured broadcast/unknown and LAN emulation servers
are not required to provide write access to the
busSubIfNum object.
busLanType readonly
Those implementations that do not support separately
configured broadcast/unknown and LAN emulation servers
are not required to provide write access to the
busLanType object.
busMaxFrm readonly
Those implementations that do not support separately
configured broadcast/unknown and LAN emulation servers
are not required to provide write access to the
busMaxFrm object.
busAdminStatus readonly
Those implementations that do not support separately
configured broadcast/unknown and LAN emulation servers
are not required to provide write access to the
busAdminStatus object. The BUS's administrative status
should be controlled via access to the lesAdminStatus.
Refer to CISCO-LES-MIB for details.