CISCO-ITP-GACT-MIB
The MIB for providing information specified
in ITU Q752 Monitoring and Measurements for
Signalling System No. 7(SS7) Network.
This information can be used to manage messages
transported over SS7 Network via Cisco IP
Transfer Point.
The Cisco IP Transfer Point (ITP) is a hardware
and software solution that transports SS7 traffic
using IP. Each ITP node provides function similar
to SS7 signalling point.
The relevant ITU documents describing this technology
is the ITU Q series, including ITU Q.700: Introduction
to CCITT Signalling System No. 7 and ITU Q.701
Functional description of the message transfer part
(MTP) of Signalling System No. 7.
- Source file
CISCO-ITP-GACT-MIB- Last revised
- Identity
ciscoGactMIB- Base OID
1.3.6.1.4.1.9.9.333
Imported Objects
| CISCO-ITP-GSP-MIB | cgspInstNetwork |
| CISCO-ITP-TC-MIB | CItpTcGlobalTitleSelectorName CItpTcGtaLongAddr CItpTcInstanceNumber CItpTcLinksetId CItpTcPointCode CItpTcServiceIndicator |
| CISCO-SMI | ciscoMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-ITP-GACT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-ITP-GACT-MIB::ciscoGactMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-GACT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-GACT-MIB::ciscoGactMIB'
Objects (36)
Showing 36 of 36 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.333 |
||
.1.3.6.1.4.1.9.9.333.0 |
||
.1.3.6.1.4.1.9.9.333.1 |
||
.1.3.6.1.4.1.9.9.333.1.1 |
||
.1.3.6.1.4.1.9.9.333.1.1.1 |
||
.1.3.6.1.4.1.9.9.333.1.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.333.1.1.1.1.1 |
|
.1.3.6.1.4.1.9.9.333.1.1.1.1.2 |
||
.1.3.6.1.4.1.9.9.333.1.1.1.1.3 |
||
.1.3.6.1.4.1.9.9.333.1.1.1.1.4 |
||
.1.3.6.1.4.1.9.9.333.1.1.1.1.5 |
||
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.333.1.1.1.1.6 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.333.1.1.1.1.7 |
|
|
octetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.333.1.1.1.1.8 |
|
|
octetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.333.1.1.1.1.9 |
|
.1.3.6.1.4.1.9.9.333.1.2 |
||
|
|
.1.3.6.1.4.1.9.9.333.1.2.1 |
|
|
|
.1.3.6.1.4.1.9.9.333.1.2.1.1 |
|
|
|
.1.3.6.1.4.1.9.9.333.1.2.1.1.1 |
|
|
|
.1.3.6.1.4.1.9.9.333.1.2.1.1.2 |
|
|
|
.1.3.6.1.4.1.9.9.333.1.2.1.1.3 |
|
|
|
.1.3.6.1.4.1.9.9.333.1.2.1.1.4 |
|
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.333.1.2.1.1.5 |
|
|
octetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.333.1.2.1.1.6 |
.1.3.6.1.4.1.9.9.333.1.2.2 |
||
.1.3.6.1.4.1.9.9.333.1.2.2.1 |
||
.1.3.6.1.4.1.9.9.333.1.2.2.1.1 |
||
.1.3.6.1.4.1.9.9.333.1.2.2.1.2 |
||
.1.3.6.1.4.1.9.9.333.1.2.2.1.3 |
||
.1.3.6.1.4.1.9.9.333.1.2.2.1.4 |
||
.1.3.6.1.4.1.9.9.333.1.2.2.1.5 |
||
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.333.1.2.2.1.6 |
|
|
octetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.9.333.1.2.2.1.7 |
|
.1.3.6.1.4.1.9.9.333.2 |
||
.1.3.6.1.4.1.9.9.333.2.1 |
||
.1.3.6.1.4.1.9.9.333.2.2 |
Dependencies (11) 5 direct · 6 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- CISCO-ITP-TC-MIBcisco
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-ITP-GSP-MIBcisco
- CISCO-ITP-GACT-MIBciscoselected
Conformance Groups (3)
|
A collection of objects providing MTP3 accounting feature.
|
.1.3.6.1.4.1.9.9.333.2.2.1
|
|
|
ciscoGactGttGroup
deprecated
|
A collection of objects providing Global Title Translation
accounting feature. |
.1.3.6.1.4.1.9.9.333.2.2.2
|
|
A collection of objects providing Global Title Translation
accounting feature. |
.1.3.6.1.4.1.9.9.333.2.2.3
|
Compliance Statements (2)
OID
.1.3.6.1.4.1.9.9.333.2.1.1The compliance statement for entities which implement
the Cisco SP MIB
the Cisco SP MIB
Required groups
| mandatory | ciscoGactMtp3Group | |
| mandatory | ciscoGactGttGroup |
OID
.1.3.6.1.4.1.9.9.333.2.1.2The compliance statement for entities which implement
the Cisco SP MIB
the Cisco SP MIB
Required groups
| mandatory | ciscoGactMtp3Group | |
| mandatory | ciscoGactGttGroupRev1 |