CISCO-ISCSI-GW-MIB Table View

This table lists the configuration of automatic 
importing and exporting of targets into and from iSCSI 
domain. If a targets is discovered in other domains, it 
is automatically imported if it is configured for 
automatic importing. Similarly, if an iSCSI target is
discovered, it is automatically exported to other domains
if it is configured to do so.

iscsiImprtExprtTgtsConfEntry row .1.3.6.1.4.1.9.9.317.1.1.1.1

An entry containing information on configuration of
importing/exporting of the targets into/from iSCSI
domain.

Indexes

No indexes recorded

Column	Syntax	OID
iscsiImprtExprtTgtsConfImport The value of this object identifies zero or more target domains. If a target domain is identified, then all the targets in that domain are automatically imported into iSCSI domain. Note that a target is not imported if…	CIscsiTargetDomainsr/w Type Values: 0 fibreChannel	.1.3.6.1.4.1.9.9.317.1.1.1.1.1
iscsiImprtExprtTgtsConfExport The value of this object identifies zero or more target domains. If a target domain is identified, then all the targets in the iSCSI domain are automatically exported to that domain. Note that only the real iSCSI targ…	CIscsiTargetDomainsr/w Type Values: 0 fibreChannel	.1.3.6.1.4.1.9.9.317.1.1.1.1.2

This table lists all the nodes in the iSCSI domain 
which are currently represented in the FC domain.  
          
Entries in this table are automatically created when
an iSCSI initiator logs (starts a session) into a target
or an iSCSI target is discovered. Entries are also 
created when targets are exported from the iSCSI domain 
into FC.  
          
Entries in this table are automatically removed when an
iSCSI initiator logs out of all targets or an iSCSI 
target disappears.
          
Entries also can be created and deleted  using the 
iscsi2FcNodeRowStatus object.
If the entry created in this table exposes either iSCSI
initiator or iSCSI target or both from the local device,
then a entry has to be created implicitly by the agent 
in the cIscsiNodeAttributesTable when an entry is 
created in this table.
          
A row in this table can not be made 'active' until values
are explicitly provided for that row's instances of 
iscsi2FcNodeName and iscsi2FcNodeRole.
          
The following objects cannot be modified when the 
iscsi2FcNodeRowStatus is 'active' :
   iscsi2FcNodeName
   iscsi2FcNodeRole
          
To modify the above objects, the entry must be deleted 
and re-created with new values of above objects.
          
Every node in this table is associated with a iSCSI 
instance which is uniquely identified by 
cIscsiInstIndex.

iscsi2FcNodeEntry row .1.3.6.1.4.1.9.9.317.1.1.3.1

An entry representing an iSCSI node which is presented
as a FC node to the FC domain.

Indexes

CISCO-ISCSI-MIBcIscsiInstIndex iscsi2FcNodeIndex

Column	Syntax	OID
iscsi2FcNodeIndex An arbitrary integer value, which identifies an iSCSI node in a FC domain.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.317.1.1.3.1.1
iscsi2FcNodeName A character string that is a globally unique identifier for the node represented by this entry. The node name is independent of the location of the node, and can be resolved into a set of addresses through various d…	IscsiNamer/w Type Constraints: range: 16..223	.1.3.6.1.4.1.9.9.317.1.1.3.1.2
iscsi2FcNodeRole The role of the node represented by this entry. Note that a gateway implementation may choose not to allow a node to operate in both roles.	CIscsiNodeRolesr/w Type Values: 0 targetTypeNode 1 initiatorTypeNode	.1.3.6.1.4.1.9.9.317.1.1.3.1.3
iscsi2FcNodePersistentFCAddr This object indicates if the node FC Address (iscsi2FcNodeFCAddr) is made persistent or not. If this object is 'true', then the same FC address is assigned to the node if it were to be represented again in the FC dom…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.317.1.1.3.1.4
iscsi2FcPortPersistentFCAddr This object indicates if the port FC addresses (given by iscsi2FcPortFCAddrListIndex) of this node is made persistent or not. If this object is 'true', then the same FC address is assigned to the port…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.317.1.1.3.1.5
iscsi2FcPortNumFCAddr The number of persistent port FC addresses that are automatically assigned to ports associated with this node. The fcAddressListTable contains the FC addresses that are assigned for the node represented by this entry.…	Unsigned32r/w Constraints: range: 0-64	.1.3.6.1.4.1.9.9.317.1.1.3.1.6
iscsi2FcNodeFCAddr The persistent FC address of the node. If this object is zero-length and iscsi2FcNodePersistentFCAddr is 'true' then the FC address of the node represented by this entry is automatically assigned and made persistent. …	CISCO-ST-TCFcNameIdOrZeror/w Type Constraints: range: 0 range: 8 range: 16	.1.3.6.1.4.1.9.9.317.1.1.3.1.7
iscsi2FcPortFCAddrListIndex The index of a list in the fcAddressListTable which lists all the FC port addresses associated with this node. The object value of the iscsi2FcPortPersistentFCAddr indicates if the addresses are persiste…	CISCO-TCListIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.9.317.1.1.3.1.8
iscsi2FcNodeVsanList2k The list of VSANs the node represented by this entry can access. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 through 7, the second …	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.317.1.1.3.1.9
iscsi2FcNodeVsanList4k The list of VSANs the node represented by this entry can access. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 2047 through 2054, the s…	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.317.1.1.3.1.10
iscsi2FcNodeDiscovered This objects indicates if the node represented by this entry was either automatically discovered or configured manually. If the value of this object is 'true', then the node represented by this entry is automatically …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.317.1.1.3.1.11
iscsi2FcNodeRowStatus Status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.317.1.1.3.1.12
iscsi2FcNodeFcAddrAssignment This object specifies how the FC address of this node is assigned. If set to 'auto', the FC address is automatically assigned to this node. If it is 'manual', then the FC address has to be configured manually. An auto…	Enumerationr/w Enumerated Values: 1 auto 2 manual	.1.3.6.1.4.1.9.9.317.1.1.3.1.13
iscsi2FcNodeAuthUser The name of the user which is to be sent with iSCSI authentication to the target, if authentication is enabled (iscsiAuthMethod other than 'none') interface on which carries session between initiator and target.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.317.1.1.3.1.14
iscsi2FcTargetUserName The user name to be used during the login authentication. This is optional. If no user name and password (defined by iscsi2FcTargetPassword ) is specified, then the global username and password defined by iscsiTargetUse…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.317.1.1.3.1.15
iscsi2FcTargetPassword The password to be used during the login authentication. This is optional. If no user name (specified by iscsi2FcTargetUserName )and password is specified, then the global username and password defined by iscsiTargetUse…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.317.1.1.3.1.16

This table lists all the FC nodes which the gateway 
presents as iSCSI nodes to the iSCSI domain. 
          
Entries in this table are automatically created when
FC nodes are discovered.
          
Entries in this table are automatically removed when 
FC nodes go offline.
          
Entries also can be created/deleted using the 
fc2IscsiNodeRowStatus object. An entry can be created by
to configure a node statically instead of allowing it to
be discovered.
          
A row in this table can not be made 'active' until values
are explicitly provided for that row's instances of 
fc2IscsiNodeName and fc2IscsiNodeRole.
          
The following objects cannot be modified when the 
fc2IscsiNodeRowStatus is 'active' :
- fc2IscsiNodeRole    
- fc2IscsiNodeName
          
To modify the above objects, the entry must be deleted 
and re-created with new values of above objects.
          
To create an iSCSI target from whole a FC target, use 
fc2ScsiPortFCAddrListIndex.
To create an iSCSI target from Logical Units on the 
FC targets, create an entry in this table. And
then create an entry (s) in the scsiLuExtTable using
fc2IscsiNodeName of an entry in this table as 
scsiLuExtLocalTargetAddress value.

fc2IscsiNodeEntry row .1.3.6.1.4.1.9.9.317.1.1.4.1

An entry representing a FC node which is presented as an
iSCSI node to the iSCSI domain.

Indexes

No indexes recorded

Column	Syntax	OID
fc2IscsiNodeRole Role of the node represented by this entry. Note that a gateway implementation may choose not to allow a node to operate in both roles.	CIscsiNodeRolesr/w Type Values: 0 targetTypeNode 1 initiatorTypeNode	.1.3.6.1.4.1.9.9.317.1.1.4.1.1
fc2IscsiNodeName The iSCSI name of the node represented by this entry.	IscsiNamer/w Type Constraints: range: 16..223	.1.3.6.1.4.1.9.9.317.1.1.4.1.2
fc2IscsiPortFCAddrListIndex The index of a list in the fcAddressListTable which lists all the FC node addresses associated with the node represented by this entry. Use this object to represent the whole FC targets.	CISCO-TCListIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.9.317.1.1.4.1.3
fc2IscsiNodePermitListIndex The index of a list in the iscsiNodeNameListTable which lists all the iSCSI nodes that are permitted to access the node represented by this entry. If fc2IscsiNodeAllIntrAccessAllowed is 'false' and the value of this ob…	CISCO-TCListIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.9.317.1.1.4.1.4
fc2IscsiNodeAdvIntfListIndex The index of a list in the nodeAdvIntfListTable which lists all the interfaces on which the node represented by this entry could be advertised.	CISCO-TCListIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.9.317.1.1.4.1.5
fc2IscsiNodeAllIntrAccessAllowed This object indicates if all the initiators can access the target represented by this entry. If this object is 'true', then all the initiators can access this target even those which are not in the initiator permit l…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.317.1.1.4.1.6
fc2IscsiNodeDiscovered This objects indicates if the node represented by this entry was either automatically discovered or configured manually. If the value of this object is 'true', then the node represented by this entry is automatically…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.317.1.1.4.1.7
fc2IscsiNodeRowStatus Status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.317.1.1.4.1.8
fc2IscsiNodeTrespassMode The trespass mode for this node. Every iSCSI target represents one or more port(s) on the FC target (fc2ScsiPortFCAddrListIndex). If this object is 'true', the node instructs the FC node …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.317.1.1.4.1.9
fc2IscsiNodeRevertToPrimaryPort This object indicates if it is required to revert back to primary port the FC target if it comes back online. Every iSCSI target represent one or more port(s) on the FC target (fc2IscsiPortFCAddrListIndex…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.317.1.1.4.1.10

This table contains the list of FC addresses.
Entries in this table are automatically created/deleted
when the FC addresses are automatically 
assigned/released to/from the entities which are using
this table to create FC address lists.
          
Entries in this table are also created/deleted using 
fcAddressRowStatus.
          
A row in this table can not be made 'active' until a 
value is explicitly provided for that row's instances 
of fcAddress.
          
Also, the following object cannot be modified when 
'fcAddressRowStatus' is 'active' :
- fcAddress
          
To modify the above object, the entry must be deleted and
re-created with new value of above object.

fcAddressListEntry row .1.3.6.1.4.1.9.9.317.1.1.5.1

An entry information about a FC address which is part
of a list. Entries with same fcAddressListIndex form a
list.

Indexes

fcAddressListIndex fcAddressIndex

Column	Syntax	OID
fcAddressListIndex The index of a list of FC addresses.	CISCO-TCListIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.317.1.1.5.1.1
fcAddressIndex An arbitrary integer value, which identifies a FC address.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.317.1.1.5.1.2
fcAddress The FC address for this entry.	CISCO-ST-TCFcNameIdr/w Type Constraints: range: 8	.1.3.6.1.4.1.9.9.317.1.1.5.1.3
fcSecondaryAddress The secondary FC address for this entry. This is the FC address used if the 'fcAddress' cannot be reached. Note that every 'fcAddress' may not need a secondary FC Address.	CISCO-ST-TCFcNameIdOrZeror/w Type Constraints: range: 0 range: 8 range: 16	.1.3.6.1.4.1.9.9.317.1.1.5.1.4
fcAddressRowStatus Status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.317.1.1.5.1.5

This table contains the list of iSCSI node names.
          
A row in this table can not be made 'active' until a 
value is explicitly provided for that row's instances 
of iscsiNodeName.
          
Also, the following objects cannot be modified when 
'iscsiNodeNameRowStatus' is 'active' :
- iscsiNodeName
          
To modify the above object, the entry must be deleted and
re-created with new value of above object.

iscsiNodeNameListEntry row .1.3.6.1.4.1.9.9.317.1.1.6.1

An entry information about an iSCSI node name which is
part of a list. Entries with same iscsiNodeNameListIndex
form a list.

Indexes

iscsiNodeNameListIndex iscsiNodeNameIndex

Column	Syntax	OID
iscsiNodeNameListIndex The index of a list of iSCSI node names.	CISCO-TCListIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.317.1.1.6.1.1
iscsiNodeNameIndex An arbitrary integer value, which identifies a iSCSI node name.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.317.1.1.6.1.2
iscsiNodeName The iSCSI node name.	IscsiNamer/w Type Constraints: range: 16..223	.1.3.6.1.4.1.9.9.317.1.1.6.1.3
iscsiNodeNameRowStatus Status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.317.1.1.6.1.4

This table contains the list of advertised 
interface list.
          
A FC node represented in the iSCSI domain as an iSCSI
node is advertised only on the interfaces which are 
allowed advertised interface list of the iSCSI node.
          
A row in this table can not be made 'active' until a 
value is explicitly provided for that row's instances 
of nodeAdvIntfIfIndex.
          
Also, the following object cannot be modified when 
'nodeAdvIntfIfRowStatus' is 'active' :
- nodeAdvIntfIfIndex
          
To modify the above object, the entry must be deleted and
re-created with new value of above object.

nodeAdvIntfListEntry row .1.3.6.1.4.1.9.9.317.1.1.7.1

An entry with containing ifIndex of an interface which
is part of the interface list. Entries with same
nodeAdvIntfListIndex form a list.

Indexes

nodeAdvIntfListIndex nodeAdvIntfIndex

Column	Syntax	OID
nodeAdvIntfListIndex The index of a list of advertized interface list.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.317.1.1.7.1.1
nodeAdvIntfIndex The index of an interface entry.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.317.1.1.7.1.2
nodeAdvIntfIfIndex The ifIndex of the interface.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.317.1.1.7.1.3
nodeAdvIntfIfRowStatus Status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.317.1.1.7.1.4

An extension of the scsiLuTable to support creation of
iSCSI virtual targets from LUs on remote FC targets.
          
To create iSCSI virtual targets from a set of LUs on FC 
targets, entries needs to be created in this table. The 
iSCSI targets can be created in different ways. For 
example:
- multiple iSCSI targets can be created from either one
  LU or a subset of LUs from a single FC target device. 
- a single iSCSI target can be created from LUs of 
  multiple FC target devices.      
          
Note that a gateway implementation may choose to support 
only a subset of these features.
            
To create a virtual iSCSI target from LUs on the remote 
FC targets,  create an entry (s) in this table with 
local LUs to map to remote LUs and 
value of scsiLuExtLocalTargetAddress to same as the
iSCSI node name of the virtual iSCSI node being created.
          
A row in this table can not be made 'active' until a 
value is explicitly provided for that row's instances 
of following objects :
- scsiLuExtRemotePortFcAddress
- scsiLuExtLocalTargetAddress
- scsiLuExtLocalLun
- scsiLuExtRemoteLun
          
Also, the following objects cannot be modified when 
'scsiLuExtRowStatus 'active' :
- scsiLuExtRemotePortFcAddress
- scsiLuExtLocalTargetAddress
- scsiLuExtLocalLun
- scsiLuExtRemoteLun
          
To modify the above objects, the entry must be deleted 
and re-created with new values of above objects.

scsiLuExtEntry row .1.3.6.1.4.1.9.9.317.1.1.8.1

An entry representing a LU.

Indexes

No indexes recorded

Column	Syntax	OID
scsiLuExtRemotePortFcAddress The FC address of the remote Fibre Channel port via which the remote LU (scsiLuExtRemoteLun) is accessed.	CISCO-ST-TCFcNameIdr/w Type Constraints: range: 8	.1.3.6.1.4.1.9.9.317.1.1.8.1.1
scsiLuExtRemotePortSecFcAddress The secondary FC address of the remote Fibre Channel port via which the remote LU (scsiLuExtRemoteSecLun) is accessed.	CISCO-ST-TCFcNameIdOrZeror/w Type Constraints: range: 0 range: 8 range: 16	.1.3.6.1.4.1.9.9.317.1.1.8.1.2
scsiLuExtLocalTargetAddress This object represents the SCSI name of the local SCSI target through which this LU (scsiLuExtLocalLun) can be accessed. The format of a SCSI name is dependent on the type of transport used to access the target. F…	CISCO-SCSI-MIBScsiNamer/w Type Constraints: range: 0 range: 8 range: 11 range: 16 range: 256 range: 258 range: 262	.1.3.6.1.4.1.9.9.317.1.1.8.1.3
scsiLuExtRemoteLun The Logical Unit Number of the remote LU.	CISCO-SCSI-MIBScsiLUNOrZeror/w Type Constraints: range: 0 range: 2 range: 8	.1.3.6.1.4.1.9.9.317.1.1.8.1.4
scsiLuExtLocalLun The configured default Logical Unit Number of this LU.	CISCO-SCSI-MIBScsiLUNOrZeror/w Type Constraints: range: 0 range: 2 range: 8	.1.3.6.1.4.1.9.9.317.1.1.8.1.5
scsiLuExtRowStatus Status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.317.1.1.8.1.6
scsiLuExtRemoteSecLun The Logical Unit Number of the remote LU corresponding to FC address scsiLuExtRemotePortSecFcAddress.	CISCO-SCSI-MIBScsiLUNOrZeror/w Type Constraints: range: 0 range: 2 range: 8	.1.3.6.1.4.1.9.9.317.1.1.8.1.7

List of iSCSI interfaces.

iscsiIfEntry row .1.3.6.1.4.1.9.9.317.1.1.9.1

An entry containing information about an iSCSI
interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
iscsiIfTcpKeepAliveTimeout The TCP Keep alive timeout for this iSCSI interface. If the value is 0, the keep-alive timeout feature is disabled.	Unsigned32r/w Constraints: range: 1-7200	.1.3.6.1.4.1.9.9.317.1.1.9.1.1
iscsiIfTcpMaxBandwidth The TCP maximum bandwidth for this iSCSI interface.	kbpsUnsigned32r/w Constraints: range: 1000-1000000	.1.3.6.1.4.1.9.9.317.1.1.9.1.2
iscsiIfTcpMaxRetransmissions The TCP maximum retransmissions for this iSCSI interface.	Unsigned32r/w Constraints: range: 1-8	.1.3.6.1.4.1.9.9.317.1.1.9.1.3
iscsiIfTcpMinRetransmitTime The TCP minimum retransmit time for this iSCSI interface.	Unsigned32r/w Constraints: range: 250-5000	.1.3.6.1.4.1.9.9.317.1.1.9.1.4
iscsiIfTcpPMTUEnable This objects indicates if the Path MTU discovery option is enabled or not for this iSCSI interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.317.1.1.9.1.5
iscsiIfTcpQOS The TCP QOS code point for this iSCSI interface.	Unsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.9.9.317.1.1.9.1.6
iscsiIfTcpSACKEnable This object indicates if the Selective Acknowledgement (SACK) option is enabled or not for this iSCSI interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.317.1.1.9.1.7
iscsiIfTcpSendBufferSize The TCP send buffer size for this iSCSI interface.	Unsigned32r/w Constraints: range: 0-8192	.1.3.6.1.4.1.9.9.317.1.1.9.1.8
iscsiIfTcpMinBandwidth The TCP minimum bandwidth for this iSCSI interface.	kbpsUnsigned32r/w Constraints: range: 1000-1000000	.1.3.6.1.4.1.9.9.317.1.1.9.1.9
iscsiIfTcpPMTUResetTimeout The timeout after which the PMTU resets to original value on this interface.	secondsUnsigned32r/w Constraints: range: 60-3600	.1.3.6.1.4.1.9.9.317.1.1.9.1.10
iscsiIfTcpLocalPortdeprecated The local TCP port of this interface.	CISCO-TCCiscoPort Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.317.1.1.9.1.11
iscsiIfForwardingMode The forwarding mode of this interface. passThrough - In this mode the iSCSI interface converts an iSCSI PDU into a FCP frame and then forwards it one at a time. s…	Enumerationr/w Enumerated Values: 1 passThrough 2 storeAndForward 4 cutThrough	.1.3.6.1.4.1.9.9.317.1.1.9.1.12
iscsiIfIntrProxyMode The initiator proxy mode for this interface. If this object is 'true', then all the initiators coming on this interface would use the initiator configuration provided by this interface. The initiator configuration inc…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.317.1.1.9.1.13
iscsiIfIntrProxyModeNodeFcAddr The Node FC address used by the initiators on this interface when the initiator proxy mode is on (iscsiIfIntrProxyMode equal to 'true').	CISCO-ST-TCFcNameIdOrZeror/w Type Constraints: range: 0 range: 8 range: 16	.1.3.6.1.4.1.9.9.317.1.1.9.1.14
iscsiIfIntrProxyModePortFcAddr The Port FC address used by the initiators on this interface when the initiator proxy mode is on (iscsiIfIntrProxyMode equal to 'true').	CISCO-ST-TCFcNameIdOrZeror/w Type Constraints: range: 0 range: 8 range: 16	.1.3.6.1.4.1.9.9.317.1.1.9.1.15
iscsiIfIntrProxyModeFcAddrAsgnmt This objects tells how the initiator proxy mode FC addresses (iscsiIfIntrProxyModeNodeFcAddr and iscsiIfIntrProxyModePortFcAddr) are assigned. If value of this object is 'auto', then the FC addresses are automatically…	Enumerationr/w Enumerated Values: 1 auto 2 manual	.1.3.6.1.4.1.9.9.317.1.1.9.1.16
iscsiIfIntrIdentificationMode This objects indicates how the initiator is identified on this interface, either by its iSCSI name (name) or by its IP address (ipaddress).	CIscsiIntrIdentificationModer/w Type Values: 1 name 2 ipaddress	.1.3.6.1.4.1.9.9.317.1.1.9.1.17
iscsiIfTcpRndTrpTimeEst This is an estimate of the round trip delay of the network pipe used for the B-D product computation, which lets us derive the TCP receive window to advertise.	microsecondsUnsigned32r/w Constraints: range: 0-300000	.1.3.6.1.4.1.9.9.317.1.1.9.1.18
iscsiIfTcpLocalTcpPort The local TCP port of this interface.	CISCO-TCCiscoPortr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.317.1.1.9.1.19
iscsiIfNumNormalConnections The number of normal iscsi connections.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.317.1.1.9.1.20
iscsiIfNumDiscovConnections The number of discovery iscsi connections.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.317.1.1.9.1.21
iscsiIfTcpCWMEnable This object is used for enabling/disabling the congestion window monitoring. If the value of this object is true(1), it is enabled. It is disabled if the value is false(2).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.317.1.1.9.1.22
iscsiIfTcpCWMBurstSize The maximum burst sent after a tcp sender idle period.	kilobytesUnsigned32r/w Constraints: range: 10-100	.1.3.6.1.4.1.9.9.317.1.1.9.1.23
iscsiIfTcpMaxJitter The maximum delay variation that is not due to to congestion that can be experienced by TCP connections on this interface.	microsecondsUnsigned32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.9.9.317.1.1.9.1.24

This table contains Gigabit Ethernet (GigE) interfaces.
It contains iSCSI-specific configuration objects for the 
GigE interface.

iscsiGigEIfEntry row .1.3.6.1.4.1.9.9.317.1.1.10.1

An entry containing information about a GigE
interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
iscsiGigEIfAuthMethod The authentication method for this interface.	IscsiAuthMethodr/w Type Values: 0 none 1 chap	.1.3.6.1.4.1.9.9.317.1.1.10.1.1
iscsiGigEIfIsnsServerProfileName The iSNS server profile name for this interface. The iSNS server profiles are defined in cIsnsClntServerProfileTable from CISCO-ISNS-CLIENT-MIB.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.317.1.1.10.1.2
iscsiGigEIfIscsiSessions Number of iSCSI sessions running over this interface.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.317.1.1.10.1.3

This table contains objects which provide more 
information about iSCSI sessions which are not in 
cIscsiSessionAttributesTable.

iscsiSessionAttributesExtEntry row .1.3.6.1.4.1.9.9.317.1.2.1.1

An entry containing information about an iSCSI
session which is not in cIscsiSessionAttributesEntry.

Indexes

No indexes recorded

Column	Syntax	OID
iscsiSsnVsan The vsan to which this session belongs to.	CISCO-ST-TCVsanIndex Type Constraints: range: 1..4094	.1.3.6.1.4.1.9.9.317.1.2.1.1.1

This table contains objects which provide 
iSCSI connection statistics.

ciscsiConnectionStatsEntry row .1.3.6.1.4.1.9.9.317.1.2.2.1

An entry containing information about iSCSI
connection statistics.

Indexes

IF-MIBifIndex CISCO-ISCSI-MIBcIscsiInstIndex cIscsiStatsNodeIndex cIscsiStatsSessionIndex cIscsiStatsConnectionIndex

Column	Syntax	OID
cIscsiStatsNodeIndex An integer value, which identifies an iSCSI node in a FC domain.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.317.1.2.2.1.1
cIscsiStatsSessionIndex An integer value, which identifies an iSCSI session.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.317.1.2.2.1.2
cIscsiStatsConnectionIndex An integer value, which identifies an iSCSI connection.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.317.1.2.2.1.3
cIscsiStatsConnectionRxBytes Total number of bytes received on an iSCSI session.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.317.1.2.2.1.4
cIscsiStatsConnectionTxBytes Total number of bytes transmitted on an iSCSI session.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.317.1.2.2.1.5
cIscsiStatsIpSecInUse Indicates whether an iSCSI connection is secure or not. If the value of this object is 'true', the Ip Security is turned on and the connection is secure. If 'false', Ip Security is not turned on and the connection may b…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.317.1.2.2.1.6