CISCO-SCSI-MIB
The Cisco version of the SCSI MIB
draft draft-ietf-ips-scsi-mib-03.txt from
the IETF.
- Source file
CISCO-SCSI-MIB- Last revised
- Identity
ciscoScsiMIB- Base OID
1.3.6.1.4.1.9.10.95
Imported Objects
| CISCO-SMI | ciscoExperiment |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | AutonomousType RowPointer RowStatus TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-SCSI-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-SCSI-MIB::ciscoScsiMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SCSI-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SCSI-MIB::ciscoScsiMIB'
Objects (152)
Showing 152 of 152 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.10.95 |
||
.1.3.6.1.4.1.9.10.95.1 |
||
.1.3.6.1.4.1.9.10.95.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.1.2 |
||
.1.3.6.1.4.1.9.10.95.1.1.3 |
||
.1.3.6.1.4.1.9.10.95.1.1.4 |
||
.1.3.6.1.4.1.9.10.95.1.1.5 |
||
.1.3.6.1.4.1.9.10.95.1.1.6 |
||
.1.3.6.1.4.1.9.10.95.1.2 |
||
.1.3.6.1.4.1.9.10.95.1.2.1 |
||
.1.3.6.1.4.1.9.10.95.1.2.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.2.1.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.9.10.95.1.2.1.1.2 |
|
.1.3.6.1.4.1.9.10.95.1.2.1.1.3 |
||
|
OctetString
|
.1.3.6.1.4.1.9.10.95.1.2.1.1.4 |
|
.1.3.6.1.4.1.9.10.95.1.2.1.1.5 |
||
.1.3.6.1.4.1.9.10.95.1.2.2 |
||
.1.3.6.1.4.1.9.10.95.1.2.2.1 |
||
.1.3.6.1.4.1.9.10.95.1.2.2.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.9.10.95.1.2.2.1.2 |
|
|
Bits
|
.1.3.6.1.4.1.9.10.95.1.2.2.1.3 |
|
.1.3.6.1.4.1.9.10.95.1.2.2.1.4 |
||
.1.3.6.1.4.1.9.10.95.1.2.2.1.5 |
||
.1.3.6.1.4.1.9.10.95.1.2.3 |
||
.1.3.6.1.4.1.9.10.95.1.2.3.1 |
||
.1.3.6.1.4.1.9.10.95.1.2.3.1.1 |
||
|
Bits
|
.1.3.6.1.4.1.9.10.95.1.2.3.1.2 |
|
.1.3.6.1.4.1.9.10.95.1.2.3.1.3 |
||
.1.3.6.1.4.1.9.10.95.1.2.3.1.4 |
||
.1.3.6.1.4.1.9.10.95.1.2.5 |
||
.1.3.6.1.4.1.9.10.95.1.2.5.1 |
||
.1.3.6.1.4.1.9.10.95.1.2.5.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.2.5.1.2 |
||
.1.3.6.1.4.1.9.10.95.1.2.5.1.3 |
||
.1.3.6.1.4.1.9.10.95.1.2.5.1.4 |
||
.1.3.6.1.4.1.9.10.95.1.3 |
||
.1.3.6.1.4.1.9.10.95.1.3.1 |
||
.1.3.6.1.4.1.9.10.95.1.3.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.10.95.1.3.1.1.1 |
|
.1.3.6.1.4.1.9.10.95.1.3.1.1.2 |
||
.1.3.6.1.4.1.9.10.95.1.3.3 |
||
.1.3.6.1.4.1.9.10.95.1.3.3.1 |
||
.1.3.6.1.4.1.9.10.95.1.3.3.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.3.3.1.2 |
||
|
commandsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.3.3.1.3 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.3.3.1.4 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.3.3.1.5 |
|
|
commandsSNMPv2-SMICounter64
|
.1.3.6.1.4.1.9.10.95.1.3.3.1.6 |
|
.1.3.6.1.4.1.9.10.95.1.3.4 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.1 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.1.1.1 |
||
|
commandsSNMPv2-SMICounter64
|
.1.3.6.1.4.1.9.10.95.1.3.4.1.1.10 |
|
.1.3.6.1.4.1.9.10.95.1.3.4.1.1.11 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.1.1.12 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.1.1.2 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.1.1.3 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.1.1.4 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.1.1.5 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.1.1.6 |
||
|
commandsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.3.4.1.1.7 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.3.4.1.1.8 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.3.4.1.1.9 |
|
.1.3.6.1.4.1.9.10.95.1.3.4.2 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.2.1 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.2.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.2.1.2 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.3 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.3.1 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.3.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.3.1.2 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.3.1.3 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.3.1.4 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.3.1.5 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.6 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.6.1 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.6.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.6.1.2 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.6.1.3 |
||
.1.3.6.1.4.1.9.10.95.1.3.4.6.1.4 |
||
.1.3.6.1.4.1.9.10.95.1.4 |
||
.1.3.6.1.4.1.9.10.95.1.4.1 |
||
.1.3.6.1.4.1.9.10.95.1.4.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.4.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.10.95.1.4.1.1.2 |
|
.1.3.6.1.4.1.9.10.95.1.4.1.1.3 |
||
.1.3.6.1.4.1.9.10.95.1.4.2 |
||
.1.3.6.1.4.1.9.10.95.1.4.2.1 |
||
.1.3.6.1.4.1.9.10.95.1.4.2.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.4.2.1.2 |
||
|
commandsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.4.2.1.3 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.4.2.1.4 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.4.2.1.5 |
|
|
commandsSNMPv2-SMICounter64
|
.1.3.6.1.4.1.9.10.95.1.4.2.1.6 |
|
.1.3.6.1.4.1.9.10.95.1.4.3 |
||
.1.3.6.1.4.1.9.10.95.1.4.3.1 |
||
.1.3.6.1.4.1.9.10.95.1.4.3.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.4.3.1.1.1 |
||
|
commandsSNMPv2-SMICounter64
|
.1.3.6.1.4.1.9.10.95.1.4.3.1.1.10 |
|
.1.3.6.1.4.1.9.10.95.1.4.3.1.1.11 |
||
.1.3.6.1.4.1.9.10.95.1.4.3.1.1.12 |
||
.1.3.6.1.4.1.9.10.95.1.4.3.1.1.2 |
||
.1.3.6.1.4.1.9.10.95.1.4.3.1.1.3 |
||
.1.3.6.1.4.1.9.10.95.1.4.3.1.1.4 |
||
.1.3.6.1.4.1.9.10.95.1.4.3.1.1.5 |
||
|
TimesSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.4.3.1.1.6 |
|
|
commandsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.4.3.1.1.7 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.4.3.1.1.8 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.4.3.1.1.9 |
|
.1.3.6.1.4.1.9.10.95.1.4.3.2 |
||
.1.3.6.1.4.1.9.10.95.1.4.3.2.1 |
||
.1.3.6.1.4.1.9.10.95.1.4.3.2.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.4.3.2.1.2 |
||
.1.3.6.1.4.1.9.10.95.1.4.3.2.1.3 |
||
.1.3.6.1.4.1.9.10.95.1.4.3.2.1.4 |
||
.1.3.6.1.4.1.9.10.95.1.5 |
||
.1.3.6.1.4.1.9.10.95.1.5.1 |
||
.1.3.6.1.4.1.9.10.95.1.5.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.5.1.1.1 |
||
|
commandsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.5.1.1.10 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.5.1.1.11 |
|
|
MegabytesSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.5.1.1.12 |
|
|
resetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.9.10.95.1.5.1.1.13 |
|
.1.3.6.1.4.1.9.10.95.1.5.1.1.14 |
||
|
commandsSNMPv2-SMICounter64
|
.1.3.6.1.4.1.9.10.95.1.5.1.1.15 |
|
.1.3.6.1.4.1.9.10.95.1.5.1.1.2 |
||
.1.3.6.1.4.1.9.10.95.1.5.1.1.3 |
||
|
OctetString
|
.1.3.6.1.4.1.9.10.95.1.5.1.1.4 |
|
|
OctetString
|
.1.3.6.1.4.1.9.10.95.1.5.1.1.5 |
|
|
OctetString
|
.1.3.6.1.4.1.9.10.95.1.5.1.1.6 |
|
.1.3.6.1.4.1.9.10.95.1.5.1.1.7 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.10.95.1.5.1.1.8 |
|
|
Bits
|
.1.3.6.1.4.1.9.10.95.1.5.1.1.9 |
|
.1.3.6.1.4.1.9.10.95.1.5.2 |
||
.1.3.6.1.4.1.9.10.95.1.5.2.1 |
||
.1.3.6.1.4.1.9.10.95.1.5.2.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.5.2.1.2 |
||
.1.3.6.1.4.1.9.10.95.1.5.2.1.3 |
||
.1.3.6.1.4.1.9.10.95.1.5.2.1.4 |
||
.1.3.6.1.4.1.9.10.95.1.5.2.1.5 |
||
.1.3.6.1.4.1.9.10.95.1.5.3 |
||
.1.3.6.1.4.1.9.10.95.1.5.3.1 |
||
.1.3.6.1.4.1.9.10.95.1.5.3.1.1 |
||
.1.3.6.1.4.1.9.10.95.1.5.3.1.2 |
||
.1.3.6.1.4.1.9.10.95.1.5.3.1.3 |
||
.1.3.6.1.4.1.9.10.95.1.5.3.1.4 |
||
.1.3.6.1.4.1.9.10.95.2 |
||
.1.3.6.1.4.1.9.10.95.2.0 |
||
.1.3.6.1.4.1.9.10.95.3 |
||
.1.3.6.1.4.1.9.10.95.3.1 |
||
.1.3.6.1.4.1.9.10.95.3.2 |
Dependencies (5) 5 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-SCSI-MIBciscoselected
Type Definitions (13)
| Integer32 |
range: 0..2147483647 |
|
| Enumeration |
device(1)port(2)other(3) |
|
| Unsigned32 |
range: 0..3 |
|
| Unsigned32 |
range: 0..15 |
|
| Unsigned32 |
range: 0..15 |
|
| OctetString |
range: 0..255 |
|
| OctetString |
range: 0..3range: 11range: 16range: 256range: 258range: 262 |
|
| Unsigned32 |
range: 1..4294967295 |
|
| Unsigned32 |
range: 0..4294967295 |
|
| OctetString |
range: 0range: 2range: 8 |
|
| OctetString |
range: 0range: 8range: 11range: 16range: 256range: 258range: 262 |
|
| OctetString |
range: 0range: 8 |
|
| Unsigned32 |
range: 0..4294967295 |
Conformance Groups (15)
|
ciscoScsiInstAlias ciscoScsiInstSoftwareIndex ciscoScsiInstVendorVersion ciscoScsiInstNotifEnable ciscoScsiDeviceAlias ciscoScsiDeviceRole ciscoScsiDevicePortNumber ciscoScsiPortRole ciscoScsiPortTrnsptPtr ciscoScsiTrnsptType ciscoScsiTrnsptPointer ciscoScsiTrnsptDevName
A collection of objects providing information about SCSI
instances, devices and ports. |
.1.3.6.1.4.1.9.10.95.3.2.1
|
|
|
ciscoScsiIntrDevAccMode ciscoScsiIntrPrtName ciscoScsiIntrPrtIdentifier ciscoScsiAttTgtPortDscTgtIdx ciscoScsiAttTgtPortName ciscoScsiAttTgtPortIdentifier
This group is relevant for an initiator device and port.
|
.1.3.6.1.4.1.9.10.95.3.2.2
|
|
|
ciscoScsiDscTgtDevOrPort ciscoScsiDscTgtName ciscoScsiDscTgtConfigured ciscoScsiDscTgtDiscovered ciscoScsiDscTgtRowStatus ciscoScsiDscTgtLastCreation ciscoScsiDscLunLun ciscoScsiDscLunIdCodeSet ciscoScsiDscLunIdAssociation ciscoScsiDscLunIdType ciscoScsiDscLunIdValue
This group is relevant for the discovered targets by an
initiator port. |
.1.3.6.1.4.1.9.10.95.3.2.3
|
|
|
ciscoScsiTgtDevNumberOfLUs ciscoScsiTgtDeviceStatus ciscoScsiTgtDevNonAccLUs ciscoScsiTgtPortName ciscoScsiTgtPortIdentifier ciscoScsiAttIntrPrtAuthIntrIdx ciscoScsiAttIntrPrtName ciscoScsiAttIntrPrtId ciscoScsiLuDefaultLun ciscoScsiLuWwnName ciscoScsiLuVendorId ciscoScsiLuProductId ciscoScsiLuRevisionId ciscoScsiLuPeripheralType ciscoScsiLuStatus ciscoScsiLuState ciscoScsiLuIdCodeSet ciscoScsiLuIdAssociation ciscoScsiLuIdType ciscoScsiLuIdValue
This group is relevant for a target device and port.
|
.1.3.6.1.4.1.9.10.95.3.2.4
|
|
|
ciscoScsiLunMapLuIndex ciscoScsiLunMapRowStatus ciscoScsiAuthIntrDevOrPort ciscoScsiAuthIntrName ciscoScsiAuthIntrLunMapIndex ciscoScsiAuthIntrLastCreation ciscoScsiAuthIntrRowStatus
This group is a collection of attributes regarding the
mapping between logical unit number, logical unit and target device. |
.1.3.6.1.4.1.9.10.95.3.2.5
|
|
|
ciscoScsiTgtPortInCommands ciscoScsiTgtPortWrMegaBytes ciscoScsiTgtPortReadMegaBytes ciscoScsiLuInCommands ciscoScsiLuReadMegaBytes ciscoScsiLuWrittenMegaBytes ciscoScsiLuInResets ciscoScsiLuOutQueueFullStatus
This group is a collection of statistics for all
implementations of the SCSI MIB that contain targets. |
.1.3.6.1.4.1.9.10.95.3.2.6
|
|
|
This group is a collection of high speed statistics for all
implementations of the SCSI MIB that contain targets. |
.1.3.6.1.4.1.9.10.95.3.2.7
|
|
|
ciscoScsiAuthIntrAttachedTimes ciscoScsiAuthIntrOutCommands ciscoScsiAuthIntrReadMegaBytes ciscoScsiAuthIntrWrMegaBytes
This group is a collection of statistics regarding
initiators authorized to attach local logical unit and target device. |
.1.3.6.1.4.1.9.10.95.3.2.8
|
|
|
This group is a collection of high speed statistics
regarding initiators authorized to attach local logical unit and target device. |
.1.3.6.1.4.1.9.10.95.3.2.9
|
|
|
ciscoScsiIntrDevOutResets ciscoScsiIntrPrtOutCommands ciscoScsiIntrPrtWrMegaBytes ciscoScsiIntrPrtReadMegaBytes
This group is a collection of statistics for all
implementations of the SCSI MIB that contain initiators. |
.1.3.6.1.4.1.9.10.95.3.2.10
|
|
|
This group is a collection of high speed statistics for all
implementations of the SCSI MIB that contain initiators. |
.1.3.6.1.4.1.9.10.95.3.2.11
|
|
|
This group is a collection of statistics for all
implementations of the SCSI MIB that contain discovered initiators. |
.1.3.6.1.4.1.9.10.95.3.2.12
|
|
|
This group is a collection of high speed statistics for all
implementations of the SCSI MIB that contain discovered initiators. |
.1.3.6.1.4.1.9.10.95.3.2.13
|
|
|
A collection of statistics regarding about SCSI devices and
ports. |
.1.3.6.1.4.1.9.10.95.3.2.14
|
|
|
This group is a collection of notifications.
|
.1.3.6.1.4.1.9.10.95.3.2.15
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.10.95.3.1.1Describes the requirements for compliance to this
SCSI MIB. If an implementation can be both a target
and an initiator, all groups are mandatory.
SCSI MIB. If an implementation can be both a target
and an initiator, all groups are mandatory.
Required groups
| mandatory | ciscoScsiDeviceGroup | |
| optional | ciscoScsiTargetGroup |
This group is mandatory for all SCSI implementations that have SCSI target devices. |
| optional | ciscoScsiLunMapGroup |
This group is mandatory for system having the capabilities of mapping local targets and logical units according remote initiators. |
| optional | ciscoScsiInitiatorGroup |
This group is mandatory for all SCSI implementations that have SCSI initiator devices. |
| optional | ciscoScsiDiscoveryGroup |
This group is mandatory for system having the capabilities of discovering remote targets via local initiators. |
| optional | ciscoScsiDeviceStatGroup |
This group is mandatory for all SCSI implementations that can gather statistics. |
| optional | ciscoScsiInitiatorStatsGroup |
This group is mandatory for all SCSI implementations that can gather statistics at SCSI initiator side. |
| optional | ciscoScsiDiscoveryStatsGroup |
This group is mandatory for system having the capabilities of gathering statistics regarding remote targets via local initiators. |
| optional | ciscoScsiTargetStatsGroup |
This group is mandatory for all SCSI implementations that can gather statistics at SCSI target devices. |
| optional | ciscoScsiLunMapStatsGroup |
This group is mandatory for SCSI implementations able to map local targets and logical units according remote initiators. |
| optional | ciscoScsiInitiatorHSStatsGroup |
This group is mandatory for all SCSI implementations that can gather statistics at SCSI initiator side and are running at high speed. |
| optional | ciscoScsiDiscoveryHSStatsGroup |
This group is mandatory for system having the capabilities of gathering statistics regarding remote targets via local initiators and are running at high speed. |
| optional | ciscoScsiTargetHSStatsGroup |
This group is mandatory for all SCSI implementations that can gather statistics at SCSI target devices in high speed system. |
| optional | ciscoScsiLunMapHSStatsGroup |
This group is mandatory for SCSI implementations able to map local targets and logical units according remote initiators in high speed system. |
| optional | ciscoScsiNotifGroup |
This group is mandatory for SCSI implementations that have local logical units and local targets. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| ciscoScsiInstAlias | readonly | Write access is not mandatory. | |
| ciscoScsiInstNotifEnable | readonly | Write access is not mandatory. | |
| ciscoScsiDeviceAlias | readonly | Write access is not mandatory. | |
| ciscoScsiAuthIntrDevOrPort | readonly | Write access is not required. | |
| ciscoScsiAuthIntrName | readonly | Write access is not required. | |
| ciscoScsiAuthIntrLunMapIndex | readonly | Write access is not required. | |
| ciscoScsiAuthIntrRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
| ciscoScsiIntrDevAccMode | readonly | Write access is not mandatory. | |
| ciscoScsiLunMapLuIndex | readonly | Write access is not mandatory. | |
| ciscoScsiLunMapRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
| ciscoScsiDscTgtDevOrPort | readonly | Write access is not mandatory. | |
| ciscoScsiDscTgtName | readonly | Write access is not mandatory. | |
| ciscoScsiDscTgtConfigured | readonly |
false(2)
|
The value of true(1) is not mandatory neither the write access. |
| ciscoScsiDscTgtRowStatus | readonly |
active(1)
|
Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1). |
Notifications / Traps (2)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.9.10.95.2.0.1 |
A notification will be generated for each occurrence of the
abnormal status (e.g., if the SCSI target device's current status is abnormal) providing that the SCSI instance's value of ciscoScsiInstNotifEnable is enabled. An SNMP agent implementing the SCSI MIB should not send more than three SCSI identical notifications in any 10-second period. |
|
.1.3.6.1.4.1.9.10.95.2.0.2 |
A notification will be generated each time that
ciscoScsiLuStatus will change providing that the SCSI instance's value of ciscoScsiInstScsiNotificationsEnable is enabled. An SNMP agent implementing the SCSI MIB should not send more than three SCSI identical notifications in any 10-second period. |