CISCO-ISCSI-GW-MIB
MIB module for monitoring and configuring iSCSI
gateway functions. An iSCSI gateway represents FC
(Fibre Channel) targets/initiators as iSCSI
targets/initiators respectively and vice versa. It
means that an iSCSI target/initiator is presented to
the FC network as a virtual FC target/initiator which
can be accessed by the real FC initiators or can access
real FC targets, respectively.
It is up to the gateway implementation how to represent
the targets/initiators in each of the domains. For
example, a gateway implementation may choose to
represent multiple FC targets either as one iSCSI target
or multiple iSCSI targets (one to one). Same applies to
initiators also.
- Source file
CISCO-ISCSI-GW-MIB- Last revised
- Identity
ciscoIscsiGwMIB- Base OID
1.3.6.1.4.1.9.9.317
Imported Objects
| CISCO-ISCSI-MIB | cIscsiInstanceAttributesEntry cIscsiInstIndex cIscsiNodeAttributesEntry cIscsiSessionAttributesEntry |
| CISCO-SCSI-MIB | ciscoScsiLuEntry ScsiLUNOrZero ScsiName |
| CISCO-SMI | ciscoMgmt |
| CISCO-ST-TC | FcNameId FcNameIdOrZero VsanIndex |
| CISCO-TC | CiscoPort ListIndex ListIndexOrZero |
| CISCO-ZS-MIB | FcList |
| IF-MIB | ifIndex InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-ISCSI-GW-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-ISCSI-GW-MIB::ciscoIscsiGwMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ISCSI-GW-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ISCSI-GW-MIB::ciscoIscsiGwMIB'
Objects (117)
Showing 117 of 117 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.317 |
||
.1.3.6.1.4.1.9.9.317.0 |
||
.1.3.6.1.4.1.9.9.317.1 |
||
.1.3.6.1.4.1.9.9.317.1.1 |
||
.1.3.6.1.4.1.9.9.317.1.1.1 |
||
.1.3.6.1.4.1.9.9.317.1.1.1.1 |
||
.1.3.6.1.4.1.9.9.317.1.1.1.1.1 |
||
.1.3.6.1.4.1.9.9.317.1.1.1.1.2 |
||
.1.3.6.1.4.1.9.9.317.1.1.10 |
||
.1.3.6.1.4.1.9.9.317.1.1.10.1 |
||
.1.3.6.1.4.1.9.9.317.1.1.10.1.1 |
||
.1.3.6.1.4.1.9.9.317.1.1.10.1.2 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.10.1.3 |
|
|
secondsUnsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.11 |
|
.1.3.6.1.4.1.9.9.317.1.1.12 |
||
.1.3.6.1.4.1.9.9.317.1.1.13 |
||
.1.3.6.1.4.1.9.9.317.1.1.14 |
||
|
|
.1.3.6.1.4.1.9.9.317.1.1.2 |
|
.1.3.6.1.4.1.9.9.317.1.1.3 |
||
.1.3.6.1.4.1.9.9.317.1.1.3.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.3.1.1 |
|
.1.3.6.1.4.1.9.9.317.1.1.3.1.10 |
||
.1.3.6.1.4.1.9.9.317.1.1.3.1.11 |
||
.1.3.6.1.4.1.9.9.317.1.1.3.1.12 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.317.1.1.3.1.13 |
|
.1.3.6.1.4.1.9.9.317.1.1.3.1.14 |
||
.1.3.6.1.4.1.9.9.317.1.1.3.1.15 |
||
.1.3.6.1.4.1.9.9.317.1.1.3.1.16 |
||
|
|
.1.3.6.1.4.1.9.9.317.1.1.3.1.2 |
|
|
|
.1.3.6.1.4.1.9.9.317.1.1.3.1.3 |
|
.1.3.6.1.4.1.9.9.317.1.1.3.1.4 |
||
.1.3.6.1.4.1.9.9.317.1.1.3.1.5 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.3.1.6 |
|
.1.3.6.1.4.1.9.9.317.1.1.3.1.7 |
||
.1.3.6.1.4.1.9.9.317.1.1.3.1.8 |
||
.1.3.6.1.4.1.9.9.317.1.1.3.1.9 |
||
.1.3.6.1.4.1.9.9.317.1.1.4 |
||
.1.3.6.1.4.1.9.9.317.1.1.4.1 |
||
|
|
.1.3.6.1.4.1.9.9.317.1.1.4.1.1 |
|
.1.3.6.1.4.1.9.9.317.1.1.4.1.10 |
||
|
|
.1.3.6.1.4.1.9.9.317.1.1.4.1.2 |
|
.1.3.6.1.4.1.9.9.317.1.1.4.1.3 |
||
.1.3.6.1.4.1.9.9.317.1.1.4.1.4 |
||
.1.3.6.1.4.1.9.9.317.1.1.4.1.5 |
||
.1.3.6.1.4.1.9.9.317.1.1.4.1.6 |
||
.1.3.6.1.4.1.9.9.317.1.1.4.1.7 |
||
.1.3.6.1.4.1.9.9.317.1.1.4.1.8 |
||
.1.3.6.1.4.1.9.9.317.1.1.4.1.9 |
||
.1.3.6.1.4.1.9.9.317.1.1.5 |
||
.1.3.6.1.4.1.9.9.317.1.1.5.1 |
||
.1.3.6.1.4.1.9.9.317.1.1.5.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.5.1.2 |
|
|
|
.1.3.6.1.4.1.9.9.317.1.1.5.1.3 |
|
.1.3.6.1.4.1.9.9.317.1.1.5.1.4 |
||
.1.3.6.1.4.1.9.9.317.1.1.5.1.5 |
||
.1.3.6.1.4.1.9.9.317.1.1.6 |
||
.1.3.6.1.4.1.9.9.317.1.1.6.1 |
||
.1.3.6.1.4.1.9.9.317.1.1.6.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.6.1.2 |
|
|
|
.1.3.6.1.4.1.9.9.317.1.1.6.1.3 |
|
.1.3.6.1.4.1.9.9.317.1.1.6.1.4 |
||
.1.3.6.1.4.1.9.9.317.1.1.7 |
||
.1.3.6.1.4.1.9.9.317.1.1.7.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.7.1.1 |
|
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.7.1.2 |
|
.1.3.6.1.4.1.9.9.317.1.1.7.1.3 |
||
.1.3.6.1.4.1.9.9.317.1.1.7.1.4 |
||
.1.3.6.1.4.1.9.9.317.1.1.8 |
||
.1.3.6.1.4.1.9.9.317.1.1.8.1 |
||
.1.3.6.1.4.1.9.9.317.1.1.8.1.1 |
||
.1.3.6.1.4.1.9.9.317.1.1.8.1.2 |
||
.1.3.6.1.4.1.9.9.317.1.1.8.1.3 |
||
.1.3.6.1.4.1.9.9.317.1.1.8.1.4 |
||
.1.3.6.1.4.1.9.9.317.1.1.8.1.5 |
||
.1.3.6.1.4.1.9.9.317.1.1.8.1.6 |
||
.1.3.6.1.4.1.9.9.317.1.1.8.1.7 |
||
.1.3.6.1.4.1.9.9.317.1.1.9 |
||
.1.3.6.1.4.1.9.9.317.1.1.9.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.1 |
|
|
secondsUnsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.10 |
|
|
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.11 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.12 |
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.13 |
||
.1.3.6.1.4.1.9.9.317.1.1.9.1.14 |
||
.1.3.6.1.4.1.9.9.317.1.1.9.1.15 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.16 |
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.17 |
||
|
microsecondsUnsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.18 |
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.19 |
||
|
kbpsUnsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.2 |
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.20 |
||
.1.3.6.1.4.1.9.9.317.1.1.9.1.21 |
||
.1.3.6.1.4.1.9.9.317.1.1.9.1.22 |
||
|
kilobytesUnsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.23 |
|
|
microsecondsUnsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.24 |
|
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.3 |
|
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.4 |
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.5 |
||
|
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.6 |
.1.3.6.1.4.1.9.9.317.1.1.9.1.7 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.8 |
|
|
kbpsUnsigned32
|
.1.3.6.1.4.1.9.9.317.1.1.9.1.9 |
|
.1.3.6.1.4.1.9.9.317.1.2 |
||
.1.3.6.1.4.1.9.9.317.1.2.1 |
||
.1.3.6.1.4.1.9.9.317.1.2.1.1 |
||
.1.3.6.1.4.1.9.9.317.1.2.1.1.1 |
||
.1.3.6.1.4.1.9.9.317.1.2.2 |
||
.1.3.6.1.4.1.9.9.317.1.2.2.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.2.2.1.1 |
|
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.2.2.1.2 |
|
|
Unsigned32
|
.1.3.6.1.4.1.9.9.317.1.2.2.1.3 |
|
.1.3.6.1.4.1.9.9.317.1.2.2.1.4 |
||
.1.3.6.1.4.1.9.9.317.1.2.2.1.5 |
||
.1.3.6.1.4.1.9.9.317.1.2.2.1.6 |
||
.1.3.6.1.4.1.9.9.317.2 |
||
.1.3.6.1.4.1.9.9.317.2.1 |
||
.1.3.6.1.4.1.9.9.317.2.2 |
Dependencies (16) 11 direct · 5 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- INET-ADDRESS-MIBrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-ISCSI-MIBcisco
- CISCO-SCSI-MIBcisco
- CISCO-ST-TCcisco
- CISCO-TCcisco
- IANAifType-MIBrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- CISCO-VSAN-MIBcisco
- CISCO-NS-MIBcisco
- CISCO-ZS-MIBcisco
- CISCO-ISCSI-GW-MIBciscoselected
Type Definitions (5)
| Enumeration |
name(1)ipaddress(2) |
|
| Bits |
targetTypeNode(0)initiatorTypeNode(1) |
|
| Bits |
fibreChannel(0) |
|
| Bits |
none(0)chap(1) |
|
| OctetString |
range: 16..223 |
Conformance Groups (18)
Compliance Statements (6)
OID
.1.3.6.1.4.1.9.9.317.2.1.1The compliance statement for entities which
implement the CISCO-ISCSI-GW-MIB.
implement the CISCO-ISCSI-GW-MIB.
Required groups
| mandatory | cigConfigurationGroup | |
| optional | cigLuConfigurationGroup |
Implementation of this group is mandatory for all systems that support creation of iSCSI virtual targets from LUs on remote FC targets. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| iscsi2FcNodeRole |
initiatorTypeNode(1)
|
Only initiatorTypeNode role need to be supported. | |
| fc2IscsiNodeRole |
targetTypeNode(0)
|
Only targetTypeNode role need to be supported. | |
| iscsi2FcNodeRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| fc2IscsiNodeRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| fcAddressRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| iscsiNodeNameRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| scsiLuExtRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
OID
.1.3.6.1.4.1.9.9.317.2.1.2The compliance statement for entities which
implement the CISCO-ISCSI-GW-MIB.
implement the CISCO-ISCSI-GW-MIB.
Required groups
| mandatory | cigConfigurationGroupRev1 | |
| mandatory | cigSessionStatsGroup | |
| mandatory | cigIscsiIfGroup | |
| optional | cigLuConfigurationGroupRev1 |
Implementation of this group is mandatory for all systems that support creation of iSCSI virtual targets from LUs on remote FC targets. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| iscsi2FcNodeRole |
initiatorTypeNode(1)
|
Only initiatorTypeNode role need to be supported. | |
| fc2IscsiNodeRole |
targetTypeNode(0)
|
Only targetTypeNode role need to be supported. | |
| iscsi2FcNodeRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| fc2IscsiNodeRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| fcAddressRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| iscsiNodeNameRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| scsiLuExtRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| iscsi2FcNodeDiscovered | readonly | Only read-only need to be supported. |
OID
.1.3.6.1.4.1.9.9.317.2.1.3The compliance statement for entities which
implement the CISCO-ISCSI-GW-MIB.
implement the CISCO-ISCSI-GW-MIB.
Required groups
| mandatory | cigConfigurationGroupRev2 | |
| mandatory | cigSessionStatsGroup | |
| mandatory | cigIscsiIfGroupRev1 | |
| mandatory | cigIscsiAuthGroup | |
| mandatory | cigIscsiGigEIfGroup | |
| optional | cigLuConfigurationGroupRev1 |
Implementation of this group is mandatory for all systems that support creation of iSCSI virtual targets from LUs on remote FC targets. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| iscsi2FcNodeRole |
initiatorTypeNode(1)
|
Only initiatorTypeNode role need to be supported. | |
| fc2IscsiNodeRole |
targetTypeNode(0)
|
Only targetTypeNode role need to be supported. | |
| iscsi2FcNodeRowStatus | readwrite |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
| fc2IscsiNodeRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| fcAddressRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| iscsiNodeNameRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| scsiLuExtRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| iscsi2FcNodeDiscovered | readonly | Only read-only need to be supported. |
OID
.1.3.6.1.4.1.9.9.317.2.1.4The compliance statement for entities which
implement the CISCO-ISCSI-GW-MIB.
implement the CISCO-ISCSI-GW-MIB.
Required groups
| mandatory | cigConfigurationGroupRev3 | |
| mandatory | cigSessionStatsGroup | |
| mandatory | cigIscsiIfGroupRev3 | |
| mandatory | cigIscsiAuthGroup | |
| mandatory | cigIscsiGigEIfGroup | |
| optional | cigLuConfigurationGroupRev1 |
Implementation of this group is mandatory for all systems that support creation of iSCSI virtual targets from LUs on remote FC targets. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| iscsi2FcNodeRole |
initiatorTypeNode(1)
|
Only initiatorTypeNode role need to be supported. | |
| fc2IscsiNodeRole |
targetTypeNode(0)
|
Only targetTypeNode role need to be supported. | |
| iscsi2FcNodeRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| fc2IscsiNodeRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| fcAddressRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| iscsiNodeNameRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| scsiLuExtRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| iscsi2FcNodeDiscovered | readonly | Only read-only need to be supported. |
OID
.1.3.6.1.4.1.9.9.317.2.1.5The compliance statement for entities which
implement the CISCO-ISCSI-GW-MIB.
implement the CISCO-ISCSI-GW-MIB.
Required groups
| mandatory | cigConfigurationGroupRev3 | |
| mandatory | cigSessionStatsGroup | |
| mandatory | cigIscsiIfGroupRev4 | |
| mandatory | cigIscsiAuthGroup | |
| mandatory | cigIscsiGigEIfGroup | |
| optional | cigLuConfigurationGroupRev1 |
Implementation of this group is mandatory for all systems that support creation of iSCSI virtual targets from LUs on remote FC targets. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| iscsi2FcNodeRole |
initiatorTypeNode(1)
|
Only initiatorTypeNode role need to be supported. | |
| fc2IscsiNodeRole |
targetTypeNode(0)
|
Only targetTypeNode role need to be supported. | |
| iscsi2FcNodeRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| fc2IscsiNodeRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| fcAddressRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| iscsiNodeNameRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| scsiLuExtRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| iscsi2FcNodeDiscovered | readonly | Only read-only need to be supported. |
OID
.1.3.6.1.4.1.9.9.317.2.1.6The compliance statement for entities which
implement the CISCO-ISCSI-GW-MIB.
implement the CISCO-ISCSI-GW-MIB.
Required groups
| mandatory | cigConfigurationGroupRev3 | |
| mandatory | cigConfigurationGroupSup1 | |
| mandatory | cigSessionStatsGroup | |
| mandatory | cigIscsiIfGroupRev4 | |
| mandatory | cigIscsiIfGroupSup1 | |
| mandatory | cigIscsiAuthGroup | |
| mandatory | cigIscsiAuthGroupSup1 | |
| mandatory | cigIscsiGigEIfGroup | |
| mandatory | cigConnectionStatsGroup | |
| optional | cigLuConfigurationGroupRev1 |
Implementation of this group is mandatory for all systems that support creation of iSCSI virtual targets from LUs on remote FC targets. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| iscsi2FcNodeRole |
initiatorTypeNode(1)
|
Only initiatorTypeNode role need to be supported. | |
| fc2IscsiNodeRole |
targetTypeNode(0)
|
Only targetTypeNode role need to be supported. | |
| iscsi2FcNodeRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| fc2IscsiNodeRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| fcAddressRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| iscsiNodeNameRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| scsiLuExtRowStatus |
active(1), createAndGo(4), destroy(6)
|
Only 'createAndGo', 'destroy' and 'active' need to be supported. |
|
| iscsi2FcNodeDiscovered | readonly | Only read-only need to be supported. |