CISCO-IETF-VPLS-BGP-EXT-MIB Table View

This table specifies information for configuring
and monitoring BGP-specific parameters for VPLS.
          
A row is automatically created when a VPLS is
configured using BGP signalling.
          
None of the read-write objects values can be
changed when cvplsConfigRowStatus is in the active(1)
state. Changes are allowed when the cvplsConfigRowStatus
is in notInService(2) or notReady(3) states only.
If the operator need to change one of the values
for an active row the cvplsConfigRowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect.

ciVplsBgpExtConfigEntry row .1.3.6.1.4.1.9.10.140.1.1.1

Each Entry represents a conceptual row in ciVplsBgpExtConfigTable
and provides the information about BGP-specific information
for VPLS in a packet network.

Indexes

CISCO-IETF-VPLS-GENERIC-MIBcvplsConfigIndex

Column	Syntax	OID
ciVplsBgpExtConfigRouteDistinguisher This object represents the Route Distingiusher for this VPLS.	CiVplsBgpExtRouteDistinguisherr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.10.140.1.1.1.1
ciVplsBgpExtConfigVERangeSize This object represents the size of the range of VE identifiers in this VPLS. This number controls the size of the label block advertised for this VE by the PE. A value of 0 indicates that the range is not configured an…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.10.140.1.1.1.4

This table specifies information for the list of RTs imported or 
exported by BGP during auto-discovery of VPLS.

civplsBgpExtRTEntry row .1.3.6.1.4.1.9.10.140.1.2.1

Each Entry represents a conceptual row in civplsBgpExtRTTable
and provides the information about the value of the RT being used by BGP.
Depending on the value of civplsBgpExtRTType, an RT might be exported or
imported …

Indexes

CISCO-IETF-VPLS-GENERIC-MIBcvplsConfigIndex ciVplsBgpExtRTType ciVplsBgpExtRT

Column	Syntax	OID
ciVplsBgpExtRTType This object represents the type of a RT usage. RTs can be specified to be imported, exported, or both.	CiVplsBgpExtRouteTargetTyper/w Type Values: 1 import 2 export 3 both	.1.3.6.1.4.1.9.10.140.1.2.1.1
ciVplsBgpExtRT The RT associated with the VPLS service.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.9.10.140.1.2.1.2
ciVplsBgpExtRTStorageType This object indicates the storage type for this row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.10.140.1.2.1.3
ciVplsBgpExtRTRowStatus This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.140.1.2.1.4

This table associates VPLS Edge devices to a VPLS.
The VEs assigned to a VPLS can be configured on a PE.
This table has an expansion dependant relationship 
with cvplsConfigTable. For each row identified by 
cvplsConfigIndex, there may exist one or more rows 
in this table. ciVplsBgpExtVEId is the expansion index. 
          
None of the read-create objects values can be
changed when ciVplsBgpExtVERowStatus is in the active(1)
state. Changes are allowed when the ciVplsBgpExtVERowStatus
is in notInService(2) or notReady(3) states only.
If the operator need to change one of the values
for an active row the ciVplsBgpExtVERowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect.

ciVplsBgpExtVEEntry row .1.3.6.1.4.1.9.10.140.1.3.1

Each Entry represents a conceptual row in ciVplsBgpExtVETable
and provides the information about VPLS Edge devices.

Indexes

CISCO-IETF-VPLS-GENERIC-MIBcvplsConfigIndex ciVplsBgpExtVEId

Column	Syntax	OID
ciVplsBgpExtVEId This object identifies a VE associated with a VPLS.	CiVplsBgpExtVEID	.1.3.6.1.4.1.9.10.140.1.3.1.1
ciVplsBgpExtVEName This object represents the name of the site or u-PE associated with this VE.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.10.140.1.3.1.2
ciVplsBgpExtVEPreference This object represents the preference of the VE if the site is multi-homed and VE Id is used.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.10.140.1.3.1.3
ciVplsBgpExtVEStorageType This object indicates the storage type for this row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.10.140.1.3.1.5
ciVplsBgpExtVERowStatus This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.140.1.3.1.6

This table provides BGP-specific information for
an association between a VPLS and the 
corresponding Pseudo Wires. A service can have more
than one Pseudo Wire association. Pseudo Wires are
defined in the cpwvcTable.
          
Each row represents an association between a VPLS instance 
and one or more Pseudo Wires defined in the cpwVcTable in 
CISCO-IETF-PW-MIB. 
          
An Entry in this table in instantiated only when
BGP signalling is used to configure VPLS.

ciVplsBgpExtPwBindEntry row .1.3.6.1.4.1.9.10.140.1.4.1

Each Entry represents a conceptual row in ciVplsBgpExtPwBindTable
and provides the information about BGP-specific information for
an association between a VPLS and the
corresponding Pseudo Wires.

Indexes

CISCO-IETF-VPLS-GENERIC-MIBcvplsConfigIndex CISCO-IETF-VPLS-GENERIC-MIBcvplsPwBindIndex

Column	Syntax	OID
ciVplsBgpExtPwBindLocalVEId This object represents the local VE this Pseudo Wire is associated with.	CiVplsBgpExtVEID	.1.3.6.1.4.1.9.10.140.1.4.1.1
ciVplsBgpExtPwBindRemoteVEId This object represents the remote VE this Pseudo Wire is associated with.	CiVplsBgpExtVEID	.1.3.6.1.4.1.9.10.140.1.4.1.2