Standard view Table view

CISCO-IETF-VPLS-BGP-EXT-MIB

        This MIB module enables the use of any underlying Pseudo Wire network.
        
This MIB extends the MIB module published in the RFC 4188 to manage
object definitions for BGP signalled VPLS.
        
                      GLOSSARY
PE 
The term PE refers to Provider-Edge devices.
        
Pseudo Wire
An emulation of a native service over a Packet Switched Network. 
        
RD (Route Distinguisher)
They are used to create VPN-IPv4 addresses, as specified in [RFC4364].
        
RT (Route Target)
A Route Target attribute can be thought of as identifying a set of
sites. More description specified in [RFC4364].
        
u-PE
A Layer 2 PE device used for Layer 2 aggregation. The notion of u-PE is 
described further in [RFC4761].
        
VE
The term VE refers to a VPLS Edge device, which could be either
a PE or a u-PE.
        
VPLS
Virtual private LAN service. A type of layer 2 VPN.
Source file
CISCO-IETF-VPLS-BGP-EXT-MIB
Last revised
Identity
ciscoIetfVplsBgpExtMIB
Base OID
1.3.6.1.4.1.9.10.140
Imported Objects
CISCO-IETF-VPLS-GENERIC-MIB cvplsConfigIndex cvplsPwBindIndex
CISCO-SMI ciscoExperiment
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC RowStatus StorageType TEXTUAL-CONVENTION
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IETF-VPLS-BGP-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IETF-VPLS-BGP-EXT-MIB::ciscoIetfVplsBgpExtMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-VPLS-BGP-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-VPLS-BGP-EXT-MIB::ciscoIetfVplsBgpExtMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (27)
ciscoIetfVplsBgpExtMIB
.1.3.6.1.4.1.9.10.140
ciscoIetfVplsBgpExtMIBNotifs
.1.3.6.1.4.1.9.10.140.0
ciscoIetfVplsBgpExtMIBObjects
.1.3.6.1.4.1.9.10.140.1
ciVplsBgpExtConfigTable
.1.3.6.1.4.1.9.10.140.1.1
ciVplsBgpExtConfigEntry
CISCO-IETF-VPLS-GENERIC-MIBcvplsConfigIndex
 .1.3.6.1.4.1.9.10.140.1.1.1
ciVplsBgpExtConfigRouteDistinguisher r/w
CiVplsBgpExtRouteDistinguisher
 .1.3.6.1.4.1.9.10.140.1.1.1.1
ciVplsBgpExtConfigVERangeSize r/w
Unsigned32
 .1.3.6.1.4.1.9.10.140.1.1.1.4
civplsBgpExtRTTable
.1.3.6.1.4.1.9.10.140.1.2
civplsBgpExtRTEntry
CISCO-IETF-VPLS-GENERIC-MIBcvplsConfigIndexciVplsBgpExtRTTypeciVplsBgpExtRT
 .1.3.6.1.4.1.9.10.140.1.2.1
ciVplsBgpExtRTType r/w
CiVplsBgpExtRouteTargetType
 .1.3.6.1.4.1.9.10.140.1.2.1.1
ciVplsBgpExtRT r/w
OctetString
 .1.3.6.1.4.1.9.10.140.1.2.1.2
ciVplsBgpExtRTStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.4.1.9.10.140.1.2.1.3
ciVplsBgpExtRTRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.10.140.1.2.1.4
ciVplsBgpExtVETable
.1.3.6.1.4.1.9.10.140.1.3
ciVplsBgpExtVEEntry
CISCO-IETF-VPLS-GENERIC-MIBcvplsConfigIndexciVplsBgpExtVEId
 .1.3.6.1.4.1.9.10.140.1.3.1
ciVplsBgpExtVEId
CiVplsBgpExtVEID
 .1.3.6.1.4.1.9.10.140.1.3.1.1
ciVplsBgpExtVEName r/w
SNMP-FRAMEWORK-MIBSnmpAdminString
 .1.3.6.1.4.1.9.10.140.1.3.1.2
ciVplsBgpExtVEPreference r/w
Unsigned32
 .1.3.6.1.4.1.9.10.140.1.3.1.3
ciVplsBgpExtVEStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.4.1.9.10.140.1.3.1.5
ciVplsBgpExtVERowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.10.140.1.3.1.6
ciVplsBgpExtPwBindTable
.1.3.6.1.4.1.9.10.140.1.4
ciVplsBgpExtPwBindEntry
CISCO-IETF-VPLS-GENERIC-MIBcvplsConfigIndexCISCO-IETF-VPLS-GENERIC-MIBcvplsPwBindIndex
 .1.3.6.1.4.1.9.10.140.1.4.1
ciVplsBgpExtPwBindLocalVEId
CiVplsBgpExtVEID
 .1.3.6.1.4.1.9.10.140.1.4.1.1
ciVplsBgpExtPwBindRemoteVEId
CiVplsBgpExtVEID
 .1.3.6.1.4.1.9.10.140.1.4.1.2
ciscoIetfVplsBgpExtMIBConform
.1.3.6.1.4.1.9.10.140.2
ciscoIetfVplsBgpExtMIBCompliances
.1.3.6.1.4.1.9.10.140.2.1
ciscoIetfVplsBgpExtMIBGroups
.1.3.6.1.4.1.9.10.140.2.2
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. CISCO-IETF-PW-TC-MIBcisco
  5. SNMPv2-CONFrfc
  6. SNMP-FRAMEWORK-MIBrfc
  7. VPN-TC-STD-MIBrfc
  8. CISCO-IETF-VPLS-GENERIC-MIBcisco
  9. CISCO-IETF-VPLS-BGP-EXT-MIBciscoselected
Type Definitions (4)
CiVplsBgpExtRouteDistinguisher
OctetString range: 0..256
CiVplsBgpExtRouteTarget
OctetString range: 0..256
CiVplsBgpExtRouteTargetType
Enumeration
import(1)
export(2)
both(3)
CiVplsBgpExtVEID
Unsigned32
Conformance Groups (4)
ciVplsBgpExtConfigGroup
ciVplsBgpExtConfigRouteDistinguisher ciVplsBgpExtConfigVERangeSize
This group of objects help to configure L2VPN VPLS using BGP.
 .1.3.6.1.4.1.9.10.140.2.2.1
ciVplsBgpExtRTGroup
ciVplsBgpExtRTType ciVplsBgpExtRT ciVplsBgpExtRTStorageType ciVplsBgpExtRTRowStatus
The group of objects help to manage RTs
for L2VPN VPLS using BGP.
 .1.3.6.1.4.1.9.10.140.2.2.2
ciVplsBgpExtVEGroup
ciVplsBgpExtVEName ciVplsBgpExtVEPreference ciVplsBgpExtVERowStatus ciVplsBgpExtVEStorageType
The group of objects help to manage VE devices
for L2VPN VPLS using BGP.
 .1.3.6.1.4.1.9.10.140.2.2.3
ciVplsBgpExtPwBindGroup
ciVplsBgpExtPwBindLocalVEId ciVplsBgpExtPwBindRemoteVEId
The group of objects help to manage
Pseudo Wires for L2VPN VPLS using BGP.
 .1.3.6.1.4.1.9.10.140.2.2.4
Compliance Statements (1)

OID .1.3.6.1.4.1.9.10.140.2.1.1
Compliance statement for the entities that implement
the ciscoIetfVplsBgpExtMIB module.
Required groups
mandatory ciVplsBgpExtConfigGroup
mandatory ciVplsBgpExtRTGroup
mandatory ciVplsBgpExtVEGroup
mandatory ciVplsBgpExtPwBindGroup
Object refinements
ObjectAccessSyntaxDescription
ciVplsBgpExtConfigRouteDistinguisher readonly
Write access is not required.
ciVplsBgpExtRT readonly
Write access is not required.
ciVplsBgpExtRTType readonly
Write access is not required.
ciVplsBgpExtRTStorageType
volatile(2) is the only storage type required
to be supported. Support for other(1), nonVolatile (3),
permanent (4) and readOnly (5) is not required.
ciVplsBgpExtRTRowStatus readonly
Write access is not required.
ciVplsBgpExtConfigVERangeSize readonly
Write access is not required.
ciVplsBgpExtVEName readonly
Write access is not required.
ciVplsBgpExtVEPreference readonly
Write access is not required.
ciVplsBgpExtVEStorageType
volatile(2) is the only storage type required
to be supported. Support for other(1), nonVolatile (3),
permanent (4) and readOnly (5) is not required.
ciVplsBgpExtVERowStatus readonly
Write access is not required.