CISCO-IETF-VPLS-GENERIC-MIB

        This MIB module contains generic managed object definitions
for Virtual Private LAN Services as in [L2VPN-VPLS-LDP] and
[L2VPN-VPLS-BGP]
        
This MIB module enables the use of any underlying Pseudo Wire
network.
        
This MIB is based on the following IETF document.
        
http://www.ietf.org/internet-drafts/draft-ietf-l2vpn-vpls-mib-00.txt
    
Source file
CISCO-IETF-VPLS-GENERIC-MIB
Last revised
Identity
cvplsGenericMIB
Base OID
1.3.6.1.4.1.9.10.138
Imported Objects
CISCO-IETF-PW-TC-MIB CpwVcIndexType
CISCO-SMI ciscoExperiment
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus StorageType TruthValue
VPN-TC-STD-MIB VPNIdOrZero
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IETF-VPLS-GENERIC-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IETF-VPLS-GENERIC-MIB::cvplsGenericMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-VPLS-GENERIC-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-VPLS-GENERIC-MIB::cvplsGenericMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (36)
.1.3.6.1.4.1.9.10.138
.1.3.6.1.4.1.9.10.138.0
.1.3.6.1.4.1.9.10.138.1
.1.3.6.1.4.1.9.10.138.1.1
.1.3.6.1.4.1.9.10.138.1.2
.1.3.6.1.4.1.9.10.138.1.2.1
Unsigned32
.1.3.6.1.4.1.9.10.138.1.2.1.1
percentageUnsigned32
.1.3.6.1.4.1.9.10.138.1.2.1.10
percentageUnsigned32
.1.3.6.1.4.1.9.10.138.1.2.1.11
.1.3.6.1.4.1.9.10.138.1.2.1.12
Unsigned32
.1.3.6.1.4.1.9.10.138.1.2.1.13
.1.3.6.1.4.1.9.10.138.1.2.1.14
Enumeration
.1.3.6.1.4.1.9.10.138.1.2.1.15
.1.3.6.1.4.1.9.10.138.1.2.1.16
.1.3.6.1.4.1.9.10.138.1.2.1.2
.1.3.6.1.4.1.9.10.138.1.2.1.3
Enumeration
.1.3.6.1.4.1.9.10.138.1.2.1.4
.1.3.6.1.4.1.9.10.138.1.2.1.6
.1.3.6.1.4.1.9.10.138.1.2.1.7
.1.3.6.1.4.1.9.10.138.1.2.1.8
.1.3.6.1.4.1.9.10.138.1.3
.1.3.6.1.4.1.9.10.138.1.3.1
Enumeration
.1.3.6.1.4.1.9.10.138.1.3.1.1
.1.3.6.1.4.1.9.10.138.1.3.1.2
.1.3.6.1.4.1.9.10.138.1.4
.1.3.6.1.4.1.9.10.138.1.4.1
.1.3.6.1.4.1.9.10.138.1.4.1.1
Enumeration
.1.3.6.1.4.1.9.10.138.1.4.1.2
Enumeration
.1.3.6.1.4.1.9.10.138.1.4.1.3
.1.3.6.1.4.1.9.10.138.1.4.1.4
.1.3.6.1.4.1.9.10.138.1.4.1.5
.1.3.6.1.4.1.9.10.138.1.5
.1.3.6.1.4.1.9.10.138.1.6
.1.3.6.1.4.1.9.10.138.2
.1.3.6.1.4.1.9.10.138.2.1
.1.3.6.1.4.1.9.10.138.2.2
Dependencies (7) 7 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Compliance Statements (2)

OID .1.3.6.1.4.1.9.10.138.2.1.1
Compliance requirement for implementations that
provide full support for CISCO-IETF-VPLS-GENERIC-MIB.
Such devices can then be monitored and configured using
this MIB module.
Required groups

OID .1.3.6.1.4.1.9.10.138.2.1.2
Compliance requirement for implementations that only
provide read-only support for CISCO-IETF-VPLS-GENERIC-MIB.
Such devices can then be monitored but cannot be
configured using this MIB modules.
Required groups
Object refinements
ObjectAccessSyntaxDescription
cvplsConfigName readonly
Write access is not required.
cvplsConfigDescr readonly
Write access is not required.
cvplsConfigAdminStatus readonly
Write access is not required.
cvplsConfigMacLearning readonly
Write access is not required.
cvplsConfigDiscardUnknownDest readonly
Write access is not required.
cvplsConfigMacAging readonly
Write access is not required.
cvplsConfigFwdFullHighWatermark readonly
Write access is not required.
cvplsConfigFwdFullLowWatermark readonly
Write access is not required.
cvplsConfigRowStatus readonly
Write access is not required.
cvplsConfigMtu readonly
Write access is not required.
cvplsConfigServiceType readonly
Write access is not required.
cvplsPwBindConfigType readonly
Write access is not required.
cvplsPwBindType readonly
Write access is not required.
cvplsPwBindRowStatus readonly
Write access is not required.
Notifications / Traps (3)
NameOIDDescription
.1.3.6.1.4.1.9.10.138.0.1
The cvplsStatusChanged notification is generated
when there is a change in the administrative or
operating status of a VPLS service.
.1.3.6.1.4.1.9.10.138.0.2
The cvplsFwdFullAlarmRaised notification is
generated when the utilization of the Forwarding
database is above the value specified by
cvplsConfigFwdFullHighWatermark.
.1.3.6.1.4.1.9.10.138.0.3
The cvplsFwdFullAlarmCleared notification is
generated when the utilization of the Forwarding
database is below the value specified by
cvplsConfigFwdFullLowWatermark.