CISCO-IETF-VDSL-LINE-MIB Table View

This table includes common attributes describing
both ends of the line.  It is required for all VDSL
physical interfaces.  VDSL physical interfaces are
those ifEntries where ifType is equal to vdsl(97).

cvdslLineEntry row .1.3.6.1.4.1.9.10.87.1.1.1.1

An entry in the cvdslLineTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cvdslLineCoding Specifies the VDSL coding type used on this line.	CVdslLineCodingType Type Values: 1 other 2 mcm 3 scm	.1.3.6.1.4.1.9.10.87.1.1.1.1.1
cvdslLineType Defines the type of VDSL physical line entity that exists, by defining whether and how the line is channelized. If the line is channelized, the value will be other than noChannel(1). This object defines which channel …	Enumeration Enumerated Values: 1 noChannel 2 fastOnly 3 slowOnly 4 either 5 both	.1.3.6.1.4.1.9.10.87.1.1.1.1.2
cvdslLineConfProfile The value of this object identifies the rows in the VDSL Line Configuration Profile Table, ( cvdslLineConfProfileTable ), which apply for this VDSL line, and channels if applicable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.10.87.1.1.1.1.3
cvdslLineAlarmConfProfile The value of this object identifies the rows in the VDSL Line Alarm Configuration Profile Table, ( cvdslLineAlarmConfProfileTable ), which apply to this VDSL line, and channels if applicable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.10.87.1.1.1.1.4

This table provides one row for each Vtu.  Each row 
contains the Physical Layer Parameters table for that 
Vtu.  VDSL physical interfaces are those ifEntries where 
ifType is equal to vdsl(97).

cvdslPhysEntry row .1.3.6.1.4.1.9.10.87.1.1.2.1

An entry in the cvdslPhysTable.

Indexes

IF-MIBifIndex cvdslPhysSide

Column	Syntax	OID
cvdslPhysSide Identifies whether the modem is the Vtuc or Vtur.	CVdslLineEntity Type Values: 1 vtuc 2 vtur	.1.3.6.1.4.1.9.10.87.1.1.2.1.1
cvdslInvSerialNumber The vendor specific string that identifies the vendor equipment.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.9.10.87.1.1.2.1.2
cvdslInvVendorID The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.9.10.87.1.1.2.1.3
cvdslInvVersionNumber The vendor specific version number sent by this Vtu as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.9.10.87.1.1.2.1.4
cvdslCurrSnrMgn Noise Margin as seen by this Vtu with respect to its received signal in tenth dB.	tenth dBInteger32 Constraints: range: -640-640	.1.3.6.1.4.1.9.10.87.1.1.2.1.5
cvdslCurrAtn Measured difference in the total power transmitted by the peer Vtu and the total power received by this Vtu.	tenth dBUnsigned32 Constraints: range: 0-630	.1.3.6.1.4.1.9.10.87.1.1.2.1.6
cvdslCurrStatus Indicates current state of the Vtu line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming …	Bits Enumerated Values: 0 noDefect 1 lossOfFraming 2 lossOfSignal 3 lossOfPower 4 lossOfSignalQuality 5 lossOfLink 6 dataInitFailure 7 configInitFailure 8 protocolInitFailure 9 noPeerVtuPresent	.1.3.6.1.4.1.9.10.87.1.1.2.1.7
cvdslCurrOutputPwr Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence.	tenth dBmInteger32 Constraints: range: -310-310	.1.3.6.1.4.1.9.10.87.1.1.2.1.8
cvdslCurrAttainableRate Indicates the maximum currently attainable data rate by the Vtu. This value will be equal or greater than the current line rate.	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.87.1.1.2.1.9

This table provides one row for each Vtu channel.
VDSL channel interfaces are those ifEntries where 
ifType is equal to interleave(124) or fast(125).

cvdslChanEntry row .1.3.6.1.4.1.9.10.87.1.1.3.1

An entry in the cvdslChanTable.

Indexes

IF-MIBifIndex cvdslPhysSide

Column	Syntax	OID
cvdslChanInterleaveDelay Interleave Delay for this channel. Interleave delay applies only to the interleave (slow) channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and …	milli-secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.87.1.1.3.1.1
cvdslChanCrcBlockLength Indicates the length of the channel data-block on which the CRC operates.	byteSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.87.1.1.3.1.2

This table contains information on the VDSL line
configuration.  One entry in this table reflects a
profile defined by a manager which can be used to
configure the VDSL line.

cvdslLineConfProfileEntry row .1.3.6.1.4.1.9.10.87.1.1.8.1

Each entry consists of a list of parameters that
represents the configuration of a VDSL modem. A
default profile with an index of 1 will always exist
and its parameters will be set to vendor specific
values, unless ot…

Indexes

cvdslPhysSide cvdslLineConfProfileIndex

Column	Syntax	OID
cvdslLineConfProfileIndex This object is used by the line configuration table in order to identify a row in that table. The system will always provide a default profile whose value is 1.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.8.1.1
cvdslLineConfProfileName The name for this profile as specified by a user.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.10.87.1.1.8.1.2
cvdslLineConfTargetSnrMgn Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.4.1.9.10.87.1.1.8.1.3
cvdslLineConfTxSpeed Transmit speed for this modem. The corresponding modem on the other end of the VDSL line will have an equal cvdslLineConfRxSpeed value.	bits per secondInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.8.1.4
cvdslLineConfRxSpeed Receive speed for this modem. The corresponding modem on the other end of the VDSL line will have an equal cvdslLineConfTxSpeed value.	bits per secondInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.8.1.5
cvdslLineConfProfileRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the prof…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.87.1.1.8.1.6

This table contains information on the VDSL line
configuration.  One entry in this table reflects a
profile defined by a manager which can be used to
configure the VDSL line.

cvdslLineMCMConfProfileEntry row .1.3.6.1.4.1.9.10.87.1.1.9.1

Each entry consists of a list of parameters that
represents the configuration of a multiple carrier
modulation VDSL modem. A default profile with an
index of 1 will always exist and its parameters will
be set to vend…

Indexes

cvdslPhysSide cvdslLineConfProfileIndex

Column	Syntax	OID
cvdslMCMConfProfileTxWindowLength Specifies the length of the transmit window, counted in samples at the sampling rate corresponding to the negotiated value of N.	samplesInteger32r/w Constraints: range: 1-255	.1.3.6.1.4.1.9.10.87.1.1.9.1.1
cvdslMCMConfProfileRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the prof…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.87.1.1.9.1.2

This table contains transmit band descriptor configuration
information for a VDSL line.  Each entry in this table 
reflects the configuration for one of possibly many bands
with a multiple carrier modulation (MCM) VDSL line.
These entries are defined by a manager and can be used to
configure the VDSL line.

cvdslLineMCMConfProfileTxBandEntry row .1.3.6.1.4.1.9.10.87.1.1.10.1

Each entry consists of a transmit band descriptor, which
is defined by a start and a stop tone index.

A default profile with an index of 1 will always exist and
its parameters will be set to vendor specific…

Indexes

cvdslPhysSide cvdslLineConfProfileIndex cvdslMCMConfProfileTxBandNumber

Column	Syntax	OID
cvdslMCMConfProfileTxBandNumber The index for this band descriptor entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.10.1.1
cvdslMCMConfProfileTxBandStart Start tone index for this band.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.10.1.2
cvdslMCMConfProfileTxBandStop Stop tone index for this band.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.10.1.3
cvdslMCMConfProfileTxBandRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the prof…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.87.1.1.10.1.4

This table contains receive band descriptor configuration
information for a VDSL line.  Each entry in this table 
reflects the configuration for one of possibly many bands
with a multiple carrier modulation (MCM) VDSL line.
These entries are defined by a manager and can be used to
configure the VDSL line.

cvdslLineMCMConfProfileRxBandEntry row .1.3.6.1.4.1.9.10.87.1.1.11.1

Each entry consists of a transmit band descriptor, which
defines the start and stop bands and the power spectral
density (PSD) for that band.

A default profile with an index of 1 will always exist and
its…

Indexes

cvdslPhysSide cvdslLineConfProfileIndex cvdslMCMConfProfileRxBandNumber

Column	Syntax	OID
cvdslMCMConfProfileRxBandNumber The index for this band descriptor entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.11.1.1
cvdslMCMConfProfileRxBandStart Start tone index for this band.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.11.1.2
cvdslMCMConfProfileRxBandStop Stop tone index for this band.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.11.1.3
cvdslMCMConfProfileRxBandRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the prof…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.87.1.1.11.1.4

This table contains transmit PSD mask descriptor 
configuration information for a VDSL line.  Each entry in 
this table reflects the configuration for one tone within
a multiple carrier modulation (MCM) VDSL line.  These 
entries are defined by a manager and can be used to 
configure the VDSL line.

cvdslLineMCMConfProfileTxPSDEntry row .1.3.6.1.4.1.9.10.87.1.1.12.1

Each entry consists of a transmit PSD mask descriptor,
which defines the power spectral density (PSD) for a tone.

A default profile with an index of 1 will always exist and
its parameters will be set to ve…

Indexes

cvdslPhysSide cvdslLineConfProfileIndex cvdslMCMConfProfileTxPSDNumber

Column	Syntax	OID
cvdslMCMConfProfileTxPSDNumber The index for this mask descriptor entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.12.1.1
cvdslMCMConfProfileTxPSDTone The tone index for which the PSD is being specified.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.12.1.2
cvdslMCMConfProfileTxPSDPSD Power Spectral Density level in steps of 0.5dB with an offset of -140dbm/Hz.	0.5dBInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.12.1.3
cvdslMCMConfProfileTxPSDRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the prof…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.87.1.1.12.1.4

This table contains transmit maximum PSD mask descriptor 
configuration information for a VDSL line.  Each entry in 
this table reflects the configuration for one tone within
a multiple carrier modulation (MCM) VDSL modem.  These 
entries are defined by a manager and can be used to 
configure the VDSL line.

cvdslLineMCMConfProfileMaxTxPSDEntry row .1.3.6.1.4.1.9.10.87.1.1.13.1

Each entry consists of a transmit PSD mask descriptor,
which defines the maximum power spectral density (PSD)
for a tone.

A default profile with an index of 1 will always exist and
its parameters will be …

Indexes

cvdslPhysSide cvdslLineConfProfileIndex cvdslMCMConfProfileMaxTxPSDNumber

Column	Syntax	OID
cvdslMCMConfProfileMaxTxPSDNumber The index for this band descriptor entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.13.1.1
cvdslMCMConfProfileMaxTxPSDTone The tone index for which the PSD is being specified.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.13.1.2
cvdslMCMConfProfileMaxTxPSDPSD Power Spectral Density level in steps of 0.5dB with an offset of -140dbm/Hz.	0.5dBInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.13.1.3
cvdslMCMConfProfileMaxTxPSDRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the prof…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.87.1.1.13.1.4

This table contains maximum receive PSD mask descriptor 
configuration information for a VDSL line.  Each entry in 
this table reflects the configuration for one tone within
a multiple carrier modulation (MCM) VDSL modem.  These 
entries are defined by a manager and can be used to 
configure the VDSL line.

cvdslLineMCMConfProfileMaxRxPSDEntry row .1.3.6.1.4.1.9.10.87.1.1.14.1

Each entry consists of a transmit PSD mask descriptor,
which defines the power spectral density (PSD) for a
tone.

A default profile with an index of 1 will always exist and
its parameters will be set to ve…

Indexes

cvdslPhysSide cvdslLineConfProfileIndex cvdslMCMConfProfileMaxRxPSDNumber

Column	Syntax	OID
cvdslMCMConfProfileMaxRxPSDNumber The index for this band descriptor entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.14.1.1
cvdslMCMConfProfileMaxRxPSDTone The tone index for which the PSD is being specified.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.14.1.2
cvdslMCMConfProfileMaxRxPSDPSD Power Spectral Density level in steps of 0.5dB with an offset of -140dbm/Hz.	0.5dBInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.14.1.3
cvdslMCMConfProfileMaxRxPSDRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the prof…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.87.1.1.14.1.4

This table contains information on the VDSL line
configuration.  One entry in this table reflects a
profile defined by a manager which can be used to
configure the VDSL line.

cvdslLineSCMConfProfileEntry row .1.3.6.1.4.1.9.10.87.1.1.15.1

Each entry consists of a list of parameters that
represents the configuration of a single carrier
modulation VDSL modem.

A default profile with an index of 1 will always exist and
its parameters will be s…

Indexes

cvdslPhysSide cvdslLineConfProfileIndex

Column	Syntax	OID
cvdslSCMConfProfileInterleaveDepth Specifies the interleaving depth.	octetsInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.15.1.1
cvdslSCMConfProfileFastCodewordSize Specifies the length in octets of the fast codeword. A value of 0 indicates that the single latency transport class is to be utilized.	octetsInteger32r/w Constraints: range: 0-180	.1.3.6.1.4.1.9.10.87.1.1.15.1.2
cvdslSCMConfProfileTransmitPSDMask The transmit power spectral density mask code.	Bitsr/w Enumerated Values: 0 vendorNotch1 1 vendorNotch2 2 amateurBand30m 3 amateurBand40m 4 amateurBand80m 5 amateurBand160m	.1.3.6.1.4.1.9.10.87.1.1.15.1.3
cvdslSCMConfProfileTransmitPSDLevel The transmit power spectral density for the VDSL modem.	dBm/HzInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.15.1.4
cvdslSCMConfProfileSymbolRateProfile The symbol rate profile calculated as S = SR/BSR, where SR is the required symbol rate in kbaud, BSR = 67.5.	kbaudInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.15.1.5
cvdslSCMConfProfileConstellationSize Specifies the constellation size.	log2Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.9.10.87.1.1.15.1.6
cvdslSCMConfProfileCenterFrequency Specifies the center frequency profile K.	kHzInteger32r/w Constraints: range: 0-511	.1.3.6.1.4.1.9.10.87.1.1.15.1.7
cvdslSCMConfProfileRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the prof…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.87.1.1.15.1.8

This table contains information on the VDSL line alarm
configuration.  One entry in this table reflects a profile
defined by a manager which can be used to configure the 
VDSL line alarm thresholds.

cvdslLineAlarmConfProfileEntry row .1.3.6.1.4.1.9.10.87.1.1.16.1

Each entry consists of a list of parameters that
represents the configuration of a VDSL line alarm
profile.
A default profile with an index of 1 will always exist and
its parameters will be set to vendor specific valu…

Indexes

cvdslPhysSide cvdslLineAlarmConfProfileIndex

Column	Syntax	OID
cvdslLineAlarmConfProfileIndex This object is used by the line alarm configuration table in order to identify a row in that table. The system will always provide a default profile whose index is 1.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.87.1.1.16.1.1
cvdslLineAlarmConfProfileName The name for this profile as specified by a user.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.10.87.1.1.16.1.2
cvdslInitFailureNotificationEnable This object specifies if a cvdslInitFailureNotification notification will be generated if an initialization failure occurs.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.87.1.1.16.1.3
cvdslLineAlarmConfProfileRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the prof…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.87.1.1.16.1.4