cvdslPhysSide
CISCO-IETF-VDSL-LINE-MIB ·
.1.3.6.1.4.1.9.10.87.1.1.2.1.1
Object
column
CVdslLineEntity
Identifies whether the modem is the Vtuc or Vtur.
Context
- MIB
- CISCO-IETF-VDSL-LINE-MIB
- OID
.1.3.6.1.4.1.9.10.87.1.1.2.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- cvdslPhysEntry
- Table
- cvdslPhysTable
- Siblings
- 8
Syntax
CVdslLineEntity
- Source
- CVdslLineEntity
- Base type
Enumeration
Values & Constraints
Type Values
1 | vtuc |
2 | vtur |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cvdslInvSerialNumber The vendor specific string that identifies the
vendor equipment. | column | OctetString | .1.3.6.1.4.1.9.10.87.1.1.2.1.2 |
| cvdslInvVendorID The vendor ID code is a copy of the binary vendor
identification field defined by the PHY[10] and
expressed as readable characters. | column | OctetString | .1.3.6.1.4.1.9.10.87.1.1.2.1.3 |
| cvdslInvVersionNumber The vendor specific version number sent by this Vtu
as part of the initialization messages. It is a copy
of the binary version number field defined by the
PHY[10] and expressed a… | column | OctetString | .1.3.6.1.4.1.9.10.87.1.1.2.1.4 |
| cvdslCurrSnrMgn Noise Margin as seen by this Vtu with respect to its
received signal in tenth dB. | column | tenth dB Integer32 | .1.3.6.1.4.1.9.10.87.1.1.2.1.5 |
| cvdslCurrAtn Measured difference in the total power transmitted by
the peer Vtu and the total power received by this Vtu. | column | tenth dB Unsigned32 | .1.3.6.1.4.1.9.10.87.1.1.2.1.6 |
| cvdslCurrStatus Indicates current state of the Vtu line. This is a
bit-map of possible conditions. The various bit
positions are:
0 noDefect There no defects on the… | column | Bits | .1.3.6.1.4.1.9.10.87.1.1.2.1.7 |
| cvdslCurrOutputPwr Measured total output power transmitted by this ATU.
This is the measurement that was reported during
the last activation sequence. | column | tenth dBm Integer32 | .1.3.6.1.4.1.9.10.87.1.1.2.1.8 |
| cvdslCurrAttainableRate Indicates the maximum currently attainable data rate
by the Vtu. This value will be equal or greater than
the current line rate. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.10.87.1.1.2.1.9 |