CISCO-IETF-PW-ENET-MIB Table View

This table contains the index to the Ethernet tables  
associated with this ETH VC, the VLAN configuration and  
VLAN mode.

cpwVcEnetEntry row .1.3.6.1.4.1.9.10.108.1.1.1

This table is indexed by the same index that was created
for the associated entry in the PW VC Table in the
CISCO-IETF-PW-MIB. The CpwVcIndex and the cpwVcEnetPwVlan
are used as indexes to allow multiple VLANs to e…

Indexes

CISCO-IETF-PW-MIBcpwVcIndex cpwVcEnetPwVlan

Column	Syntax	OID
cpwVcEnetPwVlan This Object defines the VLAN on the VC. The value of 4097 is used if the object is not applicable, for example when mapping all packets from an Ethernet port to this VC. The value of 4096 is used to indicate untagged…	CISCO-IETF-PW-TC-MIBCpwVcVlanCfg Type Constraints: range: 0..4097	.1.3.6.1.4.1.9.10.108.1.1.1.1
cpwVcEnetVlanMode Indicate the mode of VLAN handling between the port associated to the VC and the VC encapsulation itself. - 'other' indicate operation that is not defined by this MIB. - 'portBased' …	Enumerationr/w Enumerated Values: 0 other 1 portBased 2 noChange 3 changeVlan 4 addVlan 5 removeVlan	.1.3.6.1.4.1.9.10.108.1.1.1.2
cpwVcEnetPortVlan This object define the VLAN value on the physical port (or VPLS virtual port) if a change is required to the VLAN value between the VC and the physical/virtual port. The value of this object can be ig…	CISCO-IETF-PW-TC-MIBCpwVcVlanCfgr/w Type Constraints: range: 0..4097	.1.3.6.1.4.1.9.10.108.1.1.1.3
cpwVcEnetVcIfIndex It is sometimes convenient to model the VC PW as a virtual interface in the ifTable. In these cases this object hold the value of the ifIndex in the ifTable representing this VC PW. A value of zero indicate no suc…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.10.108.1.1.1.4
cpwVcEnetPortIfIndex This object is used to specify the ifIndex of the ETHERNET port associated with this VC for point-to-point Ethernet service, or the ifIndex of the virtual interface of the VPLS instance associated with the PW if th…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.10.108.1.1.1.5
cpwVcEnetRowStatus Enable creating, deleting and modifying this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.108.1.1.1.6
cpwVcEnetStorageType Indicates the storage type of this row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.10.108.1.1.1.7

This table may be used for MPLS PSNs if there is a need  
to hold multiple VC, each with different COS, for the same 
user service (port + PW VLAN). Such a need may arise if the 
MPLS network is capable of L-LSP or E-LSP without multiple 
COS capabilities.  Each row is indexed by the cpwVcIndex  
and indicate the PRI bits on the packet recieved from the  
user port (or VPLS virtual port) that are 
classified to this VC. Note that the EXP bit value of the VC 
is configured in the CISCO-IETF-PW-MPLS-MIB.

cpwVcEnetMplsPriMappingTableEntry row .1.3.6.1.4.1.9.10.108.1.2.1

Each entry is created if special classification based on
the PRI bits is required for this VC.

Indexes

CISCO-IETF-PW-MIBcpwVcIndex

Column	Syntax	OID
cpwVcEnetMplsPriMapping This object defines the groups of user PRI mapped into this VC. Each bit set indicates that this user priority is assigned to this VC. The value 'untagged' is used to indicate that untagged frames a…	Bitsr/w Enumerated Values: 0 pri000 1 pri001 2 pri010 3 pri011 4 pri100 5 pri101 6 pri110 7 pri111 8 untagged	.1.3.6.1.4.1.9.10.108.1.2.1.1
cpwVcEnetMplsPriMappingRowStatus Enable creating, deleting and modifying this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.108.1.2.1.2
cpwVcEnetMplsPriMappingStorageType Indicates the storage type of this row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.10.108.1.2.1.3

This table contains statistical counters specific for  
Ethernet PW.

cpwVcEnetStatsEntry row .1.3.6.1.4.1.9.10.108.1.3.1

Each entry represents the statistics gathered for the
VC carrying the Ethernet packets since this VC was
first created in the cpwVcEnetTable.

Indexes

CISCO-IETF-PW-MIBcpwVcIndex

Column	Syntax	OID
cpwVcEnetStatsIllegalVlan The number of packets received (from the PSN) on this VC with an illegal VLAN field, missing VLAN field that was expected, or A VLAN field when it was not expected. This counter is not relevant if the VC type is '…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.108.1.3.1.1
cpwVcEnetStatsIllegalLength The number of packets that were received with an illegal Ethernet packet length on this VC. An illegal length is defined as being greater than the value in the advertised maximum MTU supported, or shorter than the …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.108.1.3.1.2