CISCO-IETF-PW-ENET-MIB

        This MIB describes a model for managing Ethernet  
point-to-point pseudo wire services over a Packet  
Switched Network (PSN).
    
Source file
CISCO-IETF-PW-ENET-MIB
Last revised
Identity
cpwVcEnetMIB
Base OID
1.3.6.1.4.1.9.10.108
Imported Objects
CISCO-IETF-PW-MIB cpwVcIndex
CISCO-IETF-PW-TC-MIB CpwVcVlanCfg
CISCO-SMI ciscoExperiment
IF-MIB InterfaceIndexOrZero
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter64 experimental MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC RowStatus StorageType
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IETF-PW-ENET-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IETF-PW-ENET-MIB::cpwVcEnetMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IETF-PW-ENET-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IETF-PW-ENET-MIB::cpwVcEnetMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (24)
.1.3.6.1.4.1.9.10.108
.1.3.6.1.4.1.9.10.108.0
.1.3.6.1.4.1.9.10.108.1
.1.3.6.1.4.1.9.10.108.1.1
.1.3.6.1.4.1.9.10.108.1.1.1
.1.3.6.1.4.1.9.10.108.1.1.1.1
Enumeration
.1.3.6.1.4.1.9.10.108.1.1.1.2
.1.3.6.1.4.1.9.10.108.1.1.1.3
.1.3.6.1.4.1.9.10.108.1.1.1.4
.1.3.6.1.4.1.9.10.108.1.1.1.5
.1.3.6.1.4.1.9.10.108.1.1.1.6
.1.3.6.1.4.1.9.10.108.1.1.1.7
.1.3.6.1.4.1.9.10.108.1.2
.1.3.6.1.4.1.9.10.108.1.2.1
Bits
.1.3.6.1.4.1.9.10.108.1.2.1.1
.1.3.6.1.4.1.9.10.108.1.2.1.2
.1.3.6.1.4.1.9.10.108.1.2.1.3
.1.3.6.1.4.1.9.10.108.1.3
.1.3.6.1.4.1.9.10.108.1.3.1
.1.3.6.1.4.1.9.10.108.1.3.1.1
.1.3.6.1.4.1.9.10.108.1.3.1.2
.1.3.6.1.4.1.9.10.108.2
.1.3.6.1.4.1.9.10.108.2.1
.1.3.6.1.4.1.9.10.108.2.2
Dependencies (11) 7 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (3)
Collection of objects for basic Ethernet PW config.
.1.3.6.1.4.1.9.10.108.2.1.1
Collection of objects counting various PW level errors.
.1.3.6.1.4.1.9.10.108.2.1.2
Collection of objects defining classification to
different PW based on the user's PRI bits mapping.
This group is optional, and should be implemented
only for MPLS PSN where only L-LSP or single OA
E-LSP exists, and different PSN COS is required
based on the PRI mapping.
.1.3.6.1.4.1.9.10.108.2.1.3
Compliance Statements (1)

OID .1.3.6.1.4.1.9.10.108.2.2.1
The compliance statement for agent that support
Ethernet PW.
Required groups
mandatory cpwVcEnetGroup
mandatory cpwVcStatsGroup
optional cpwVcEnetMplsPriGroup Collection of objects defining classification to
different PW based on the user's PRI bits mapping.
This group is optional, and should be implemented
only for MPLS PSN where only L-LSP or single OA
E-LSP, exists, and different PSN COS is required
based on the PRI mapping.