CISCO-FC-FE-MIB Table View

This table contains one entry per fibre channel switch
port interface. Each entry holds the port interface 
parameters. The entries are created by the fabric 
switch when a module is inserted and it identifies a
port on the module. 
Similarly when a module is removed from the fabric
switch all the port entries in this table 
corresponding to that module are removed.
This table also hold entries for Port Channel ports.  
NOTE: Nx_ports are not represented in this table.

fcIfEntry row .1.3.6.1.4.1.9.9.289.1.1.2.1

Each entry contains FC-port configuration parameters
and state information.

Indexes

IF-MIBifIndex

Column	Syntax	OID
fcIfWwn The World-Wide Name of this FC-Port. It's a 64-bit identifier and is unique worldwide.	CISCO-ST-TCFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.9.9.289.1.1.2.1.1
fcIfAdminMode The port mode configured by the user. If the user configured the port as auto(1), then the port initialization scheme determines the mode of the port. In this case the user can look at 'fcIfOperMode' to determine the …	CISCO-ST-TCFcPortTypesr/w Type Values: 1 auto 2 fPort 3 flPort 4 ePort 5 bPort 6 fxPort 7 sdPort 8 tlPort 9 nPort 10 nlPort 11 nxPort 12 tePort 13 fvPort 14 portOperDown 15 stPort 16 npPort 17 tfPort 18 tnpPort	.1.3.6.1.4.1.9.9.289.1.1.2.1.2
fcIfOperMode The current operating mode of the port. This object will also be an additional varbind sent in the linkUp notification ( defined in IF-MIB ) in addition to the varbinds defined for this notification.	CISCO-ST-TCFcPortTypes Type Values: 1 auto 2 fPort 3 flPort 4 ePort 5 bPort 6 fxPort 7 sdPort 8 tlPort 9 nPort 10 nlPort 11 nxPort 12 tePort 13 fvPort 14 portOperDown 15 stPort 16 npPort 17 tfPort 18 tnpPort	.1.3.6.1.4.1.9.9.289.1.1.2.1.3
fcIfAdminSpeed The port speed configured by the user. If this interface is a member of a port channel port then this object cannot be modified. Since this is a characteristic of a physical port, this object may not be applicable for …	CISCO-ST-TCFcIfSpeedr/w Type Values: 1 auto 2 oneG 3 twoG 4 fourG 5 autoMaxTwoG 6 eightG 7 autoMaxFourG 8 tenG 9 autoMaxEightG 10 sixteenG 11 autoMaxSixteenG 12 thirtyTwoG 13 autoMaxThirtyTwoG 14 fiftyG 15 sixtyFourG 16 autoMaxSixtyFourG	.1.3.6.1.4.1.9.9.289.1.1.2.1.4
fcIfBeaconMode The Beacon mode configured by the user. If 'true', the Beacon mode is enabled. If 'false', the beacon mode is disabled. In Beacon mode, an interface LED is put into flashing mode for easy identification of a particular…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.2.1.5
fcIfPortChannelIfIndex The ifIndex of the port channel port this port belongs to. A value of zero indicates that this port is not part of any port channel. For port channel port this object will have the ifIndex of the port channel port itsel…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.289.1.1.2.1.6
fcIfOperStatusCause The cause of current operational state of the port. The current operational state of the port is shown by the 'ifOperStatus' defined in IF-MIB. This object will show 'none(2)' for all the 'ifOperStatus' values except f…	FcIfOperStatusReason Type Values: 1 other 2 none 3 hwFailure 4 loopbackDiagFailure 5 errorDisabled 6 swFailure 7 linkFailure 8 offline 9 nonParticipating 10 initializing 11 vsanInactive 12 adminDown 13 channelAdminDown 14 channelOperSuspended 15 channelConfigurationInProgress 16 rcfInProgress 17 elpFailureIsolation 18 escFailureIsolation 19 domainOverlapIsolation 20 domainAddrAssignFailureIsolation 21 domainOtherSideEportIsolation 22 domainInvalidRCFReceived 23 domainManagerDisabled 24 zoneMergeFailureIsolation 25 vsanMismatchIsolation 26 parentDown 27 srcPortNotBound 28 interfaceRemoved 29 fcotNotPresent 30 fcotVendorNotSupported 31 incompatibleAdminMode 32 incompatibleAdminSpeed 33 suspendedByMode 34 suspendedBySpeed 35 suspendedByWWN 36 domainMaxReTxFailure 37 eppFailure 38 portVsanMismatchIsolation 39 loopbackIsolation 40 upgradeInProgress 41 incompatibleAdminRxBBCredit 42 incompatibleAdminRxBufferSize 43 portChannelMembersDown 44 zoneRemoteNoRespIsolation 45 firstPortUpAsEport 46 firstPortNotUp 47 peerFCIPPortClosedConnection 48 peerFCIPPortResetConnection 49 fcipPortMaxReTx 50 fcipPortKeepAliveTimerExpire 51 fcipPortPersistTimerExpire 52 fcipPortSrcLinkDown 53 fcipPortSrcAdminDown 54 fcipPortAdminCfgChange 55 fcipSrcPortRemoved 56 fcipSrcModuleNotOnline 57 invalidConfig 58 portBindFailure 59 portFabricBindFailure 60 noCommonVsanIsolation 61 ficonVsanDown 62 invalidAttachment 63 portBlocked 64 incomAdminRxBBCreditPerBuf 65 tooManyInvalidFLOGIs 66 deniedDueToPortBinding 67 elpFailureRevMismatch 68 elpFailureClassFParamErr 69 elpFailureClassNParamErr 70 elpFailureUnknownFlowCTLCode 71 elpFailureInvalidFlowCTLParam 72 elpFailureInvalidPortName 73 elpFailureInvalidSwitchName 74 elpFailureRatovEdtovMismatch 75 elpFailureLoopbackDetected 76 elpFailureInvalidTxBBCredit 77 elpFailureInvalidPayloadSize 78 bundleMisCfg 79 bitErrRTThresExceeded 80 linkFailLinkReset 81 linkFailPortInitFail 82 linkFailPortUnusable 83 linkFailLossOfSignal 84 linkFailLossOfSync 85 linkFailNOSRcvd 86 linkFailOLSRcvd 87 linkFailDebounceTimeout 88 linkFailLRRcvdB2B 89 linkFailCreditLoss 90 linkFailRxQOverFlow 91 linkFailTooManyINTR 92 linkFailLIPRcvdB2B 93 linkFailCreditLossB2B 94 linkFailOPNYTMOB2B 95 linkFailOPNYRETB2B 96 linkFailLIPF8Rcvd 97 linkFailLineCardPortShutdown 98 fcspAuthenfailure 99 fcotChksumErr 100 ohmsExtLBTest 101 invalidFabricBindExh 102 tovMismatch 103 ficonNotEnabled 104 ficonNoPortnumber 105 ficonBeingEnabled 106 ePortProhibited 107 portGracefulShutdown 108 trunkNotFullyActive 109 fabricBindingSWWNNotFound 110 fabricBindingDomainInvalid 111 fabricBindingDBMismatch 112 fabricBindingNoRspFromPeer 113 vsanSuspended 114 vsanNotFound 115 trackedPortDown 116 ecSuspendedLoop 117 isolatedBundle 118 peerNotSupportBundle 119 portBringupIsolation 120 domainNotAllowedIsolated 121 virtualIvrDomainOverlapIsolation 122 outOfService 123 portAuthFailed 124 bundleStandby 125 portConnectorTypeErr 126 errorDisabledReInitLimitReached 127 ficonDupPortNum 128 localRcf 129 twoSwitchesWithSameWWN 130 invalidOtherSidePrincEFPReqRecd 131 domainOther 132 elpFailureAllZeroPeerWWNRcvd 133 preferredPathIsolation 134 fcRedirectIsolation 135 portActLicenseNotAvailable 136 sdmIsolation 137 fcidAllocationFailed 138 externallyDisabled 139 unavailableNPVUpstreamPort 140 unavailableNPVPrefUpstreamPort 141 sfpReadError 142 stickyDownOnLinkFailure 143 tooManyLinkFlapsErr 144 unidirectionalUDLD 145 txRxLoopUDLD 146 neighborMismatchUDLD 147 authzPending 148 hotStdbyInBundle 149 incompleteConfig 150 incompleteTunnelCfg 151 hwProgrammingFailed 152 tunnelDstUnreachable 153 suspendByMtu 154 sfpInvalid 155 sfpAbsent 156 portCapabilitiesUnknown 157 channelErrDisabled 158 vrfMismatch 159 vrfForwardReferencing 160 dupTunnelConfigDetected 161 primaryVLANDown 162 vrfUnusable 163 errDisableHandShkFailure 164 errDisabledBPDUGuard 165 dot1xSecViolationErrDisabled 166 emptyEchoUDLD 167 vfTaggingCapErr 168 portDisabled 169 tunnelModeNotConfigured 170 tunnelSrcNotConfigured 171 tunnelDstNotConfigured 172 tunnelUnableToResolveSrcIP 173 tunnelUnableToResolveDstIP 174 tunnelVrfDown 175 sifAdminDown 176 phyIntfDown 177 ifSifLimitExceeded 178 sifHoldDown 179 noFcoe 180 dcxCompatMismatch 181 isolateBundleLimitExceeded 182 sifNotBound 183 errDisabledLacpMiscfg 184 satFabricIfDown 185 invalidSatFabricIf 186 noRemoteChassis 187 vicEnableNotReceived 188 vicDisableReceived 189 vlanVsanMappingNotEnabled 190 stpNotFwdingInFcoeMappedVlan 191 moduleOffline 192 udldAggModeLinkFailure 193 stpInconsVpcPeerDisabled 194 setPortStateFailed 195 suspendedByVpc 196 vpcCfgInProgress 197 vpcPeerLinkDown 198 vpcNoRspFromPeer 199 protoPortSuspend 200 tunnelSrcDown 201 cdpInfoUnavailable 202 fexSfpInvalid 203 errDisabledIpConflict 204 fcotClkRateMismatch 205 portGuardTrustSecViolation 206 sdpTimeout 207 satIncompatTopo 208 waitForFlogi 209 satNotConfigured 210 npivNotEnabledInUpstream 211 vsanMismatchWithUpstreamSwPort 212 portGuardBitErrRate 213 portGuardSigLoss 214 portGuardSyncLoss 215 portGuardLinkReset 216 portGuardCreditLoss 217 ipQosMgrPolicyAppFailure 218 pauseRateLimitErrDisabled 219 lstGrpUplinkDown 220 stickyDnLinkFailure 221 routerMacFailure 222 dcxMultipleMsapIds 223 dcxHundredPdusRcvdNoAck 224 enmSatIncompatibleUplink 225 enmLoopDetected 226 nonStickyExternallyDisabled 227 subGroupIdNotAssigned 228 vemUnlicensed 229 profileNotFound 230 nonExistentVlan 231 vlanInvalidType 232 vlanDown 233 vpcPeerUpgrade 234 ipQosDcbxpCompatFailure 235 nonCiscoHbaVfTag 236 domainIdConfigMismatch 237 sfpSpeedMismatch 238 xcvrInitializing 239 xcvrAbsent 240 xcvrInvalid 241 vfcBindingInvalid 242 vlanNotFcoeEnabled 243 pvlanNativeVlanErr 244 ethL2VlanDown 245 ethIntfInvalidBinding 246 pmonFailure 247 l3NotReady 248 speedMismatch 249 flowControlMismatch 250 vdcMode 251 suspendedDueToMinLinks 252 enmPinFailLinkDown 253 inactiveM1PortFpathActiveVlan 254 parentPortDown 255 moduleRemoved 256 corePortMct 257 nonCorePortMct 258 ficonInorderNotActive 259 invalidEncapsulation 260 modemLineDeasserted 261 ipSecHndshkInProgress 262 sfpEthCompliantErr 263 cellularModemUnattached 264 outOfGlblRxBuffers 265 sfpFcCompliantErr 266 ethIntfNotLicensed 267 domainIdsInvalid 268 fabricNameInvalid 269 ficonNoPortSwapLogicalPort 270 ficonInvalidPortNum 271 remotePortInL2vpnDown 272 suspendedDueToNoLacpPdus 273 fcotValidationFailedAtDriver 274 unsupportedTransceiverMd5DigestNotSame 275 unsupportedTransceiver 276 adminStateConfigChange 277 vlanAllowedList 278 vlanAllowedListOverride 279 vlanAllowedListAdd 280 vlanAllowedRemove 281 vlanCfgStateChange 282 vlanCfgDelete 283 pppPeerNotResponding 284 pppAuthFailed 285 xcvrAuthFailed 286 badFramesRcvdFromLink	.1.3.6.1.4.1.9.9.289.1.1.2.1.7
fcIfOperStatusCauseDescr The description for the cause of current operational state of the port, shown by the object 'fcIfOperStatusCause'.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.2.1.8
fcIfAdminTrunkMode The trunking mode configured by the user. When set to 'nonTrunk(1)', the port negotiates and converts the link into non-trunking mode. This port and the neighboring port's fcIfOperTrunkMode becomes non-trunk. When set t…	Enumerationr/w Enumerated Values: 1 nonTrunk 2 trunk 3 auto	.1.3.6.1.4.1.9.9.289.1.1.2.1.9
fcIfOperTrunkMode The current trunking mode of the port.	Enumeration Enumerated Values: 1 nonTrunk 2 trunk	.1.3.6.1.4.1.9.9.289.1.1.2.1.10
fcIfAllowedVsanList2k The list of VSANs (in the range 0 through 2047) which are allowed to be received/transmitted on the port when the port is operating in trunking mode. Only ports operating in trunk mode can belong to multiple VSANs. Eac…	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.289.1.1.2.1.11
fcIfAllowedVsanList4k The list of VSANs (in the range 2048 to 4096 ) which are allowed to be received/transmitted on the port when the port is operating in trunking mode. Only ports operating in trunk mode can belong to multiple VSANs. Each…	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.289.1.1.2.1.12
fcIfActiveVsanList2k The list of VSANs (in the range 0 through 2047) this port is associated with. Only ports operating in trunk mode can belong to multiple VSANs. Each octet within the value of this object specifies a set of eight VSANs, …	CISCO-ZS-MIBFcList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.289.1.1.2.1.13
fcIfActiveVsanList4k The list of VSANs (in the range 2048 through 4096) this port is associated with. Only ports operating in trunk mode can belong to multiple VSANs. Each octet within the value of this object specifies a set of eight VSAN…	CISCO-ZS-MIBFcList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.289.1.1.2.1.14
fcIfBbCreditModel The BB_Credit model used by the FC-port. The alternate BB_Credit management model can be used in the arbitrated loop topology to manage the flow of frames between the two ports participating in the current loop circuit…	FcBbCreditModel Type Values: 1 regular 2 alternate	.1.3.6.1.4.1.9.9.289.1.1.2.1.15
fcIfHoldTime The maximum time that the FC-Port shall hold a frame in the transmitter buffer before discarding it, if it is unable to deliver the frame. The value 0 in this object means the frame will be discarded immediately if the…	microsecondsCISCO-TCMicroSeconds	.1.3.6.1.4.1.9.9.289.1.1.2.1.16
fcIfTransmitterType The technology of the port transceiver. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., the value is instantiated but its value is irrelevant.	CISCO-ST-TCFcPortTxTypes Type Values: 1 unknown 2 longWaveLaser 3 shortWaveLaser 4 longWaveLaserCostReduced 5 electrical 6 tenGigBaseSr 7 tenGigBaseLr 8 tenGigBaseEr 9 tenGigBaseLx4 10 tenGigBaseSw 11 tenGigBaseLw 12 tenGigBaseEw	.1.3.6.1.4.1.9.9.289.1.1.2.1.17
fcIfConnectorType The module type of the port connector. This object refers to the hardware implementation of the port. It will be 'embedded' if the hardware equivalent to Gigabit interface card ( GBIC ) is part of the line card and is u…	CISCO-ST-TCFcPortModuleTypes Type Values: 1 unknown 2 other 3 gbic 4 embedded 5 glm 6 gbicWithSerialID 7 gbicWithoutSerialID 8 sfpWithSerialID 9 sfpWithoutSerialID 10 xfp 11 x2Short 12 x2Medium 13 x2Tall 14 xpakShort 15 xpakMedium 16 xpakTall 17 xenpak 18 sfpDwdm 19 qsfp 20 x2Dwdm	.1.3.6.1.4.1.9.9.289.1.1.2.1.18
fcIfSerialNo The serial number of the connector unit ( e.g., for a GBIC ). If this is not applicable, return a zero-length string. Since this is a characteristic of a physical port, this object is not applicable for Port Channel por…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.2.1.19
fcIfRevision The port revision of the connector unit (e.g., for a GBIC). If this is not applicable it returns a zero-length string. Since this is a characteristic of a physical port, this object is not applicable for Port Channel po…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.2.1.20
fcIfVendor The connector unit ( e.g., for a GBIC ) vendor. If this is not applicable it returns a zero-length string. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., t…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.2.1.21
fcIfSFPSerialIDData The connector unit ( e.g., for a GBIC ) Serial ID data. If this is not applicable it returns a zero-length string. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports,…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.2.1.22
fcIfPartNumber The connector unit ( e.g., for a GBIC ) part number. If this is not applicable it returns a zero-length string. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.2.1.23
fcIfAdminRxBbCredit The receive buffer-to-buffer credits configured for this port. If the value configured is zero, then the value of the object fcIfCapOsmRxBbCreditDefault or fcIfCapFrmRxBbCreditDefault is used if the port is operating …	buffersFcBbCreditr/w Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.2.1.24
fcIfAdminRxBbCreditModeISL The receive buffer-to-buffer credits configured for this port to be used if it is operating in xE_port mode. NOTE: The value of this object is not used if cfcFeatureCtrlIndex object is configured with a…	buffersFcBbCreditr/w Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.2.1.25
fcIfAdminRxBbCreditModeFx The receive buffer-to-buffer credits configured for this port to be used if it is operating in Fx mode. NOTE: The value of this object is not used if cfcFeatureCtrlIndex object is configured with a valu…	buffersFcBbCreditr/w Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.2.1.26
fcIfOperRxBbCredit The receive buffer-to-buffer credits configured for the operational port mode.	buffersFcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.2.1.27
fcIfRxDataFieldSize The largest Data_Field size for an FT_1 frame that can be received by this port.	bytesFcRxDataFieldSizer/w Type Constraints: range: 128..2112	.1.3.6.1.4.1.9.9.289.1.1.2.1.28
fcIfActiveVsanUpList2k The list of VSANs (in the range 0 through 2047) whose operational state is 'up', that this port is associated with. Only ports operating in trunk mode can be associated to multiple VSANs. Each octet within the value of…	CISCO-ZS-MIBFcList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.289.1.1.2.1.29
fcIfActiveVsanUpList4k The list of VSANs (in the range 2048 to 4096 ) whose operational state is 'up', that this port is associated with. Only ports operating in trunk mode can be associated to multiple VSANs. Each octet within the value of …	CISCO-ZS-MIBFcList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.289.1.1.2.1.30
fcIfPortRateMode The rate of data traffic supported by this port. 'dedicated' - this interface is operating in dedicated rate mode. In dedicated rate mode each interface has an allocated …	Enumerationr/w Enumerated Values: 1 dedicated 2 shared	.1.3.6.1.4.1.9.9.289.1.1.2.1.31
fcIfAdminRxPerfBuffer The performance buffers configured for this port. These buffers in addition to the buffer-to-buffer credits are used to improve the performance of a port, hence called 'Performance buffers'. If a value of zero is set f…	buffersFcPerfBufferr/w Type Constraints: range: 0..145	.1.3.6.1.4.1.9.9.289.1.1.2.1.32
fcIfOperRxPerfBuffer The performance buffers presently operational on this port.	buffersFcPerfBuffer Type Constraints: range: 0..145	.1.3.6.1.4.1.9.9.289.1.1.2.1.33
fcIfBbScn The buffer-to-buffer state change number operational on this interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.1.2.1.34
fcIfPortInitStatus If 'true', this port successfully completed a link initialization or there was an error during link initialization. If 'false', this port did not perform successful link initialization since it was brought down by the …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.2.1.35
fcIfAdminRxBbCreditExtended This object specifies the extended BB credits that can be configured on an FC port (in the range 256 through 4095). The acceptable value depends on the BB credit configuration of other ports in the line card. Since…	buffersFcBbCreditr/w Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.2.1.36
fcIfFcTunnelIfIndex This object specifies the ifIndex of a FC tunnel that represents a logical Fibre Channel data path between a source switch and destination switch. RSPAN uses a special FC tunnel that originates at the ST port in the sou…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.289.1.1.2.1.37
fcIfServiceState The service state of the interface. Some but not all interfaces, e.g., those on hardware modules with a capability of supporting shared resources, can have their state changed to 'outOfService'. Examples of such shar…	CISCO-ST-TCFcIfServiceStateTyper/w Type Values: 1 inService 2 outOfService	.1.3.6.1.4.1.9.9.289.1.1.2.1.38
fcIfAdminBbScnMode The Buffer-to-buffer State Change Number (BB_SC_N) field (word 1, bits 15-12) specifies the Buffer-to-buffer State Change Number. It indicates that the sender of the PLOGI or FLOGI frame is requesting 2 power BB_SC_N …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.2.1.39
fcIfPortType Indicates whether this interface is internal orexternal interface on the chassis. internal(1) - This type of interface is not accessible via an externally-mounted connector on the device external(2) - This type o…	Enumeration Enumerated Values: 1 internal 2 external	.1.3.6.1.4.1.9.9.289.1.1.2.1.40
fcIfAdminFECState The port FEC state configured by the user. When set to up(1), the port negotiates and converts the link into operational FEC up only if the neighboring port fcIfAdminFECState is up(1). When set to down(2) the fcIfOperFE…	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.9.289.1.1.2.1.41
fcIfOperFECState The current operating FEC state of the port.The value is down(2) by default. If fcIfAdminFECState is up(1) for a physical port, the port negotiates and converts the link into operational FEC up only if the neighboring p…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.9.289.1.1.2.1.42
fcIfAdminFecTtsState The port FEC (Forward Error Correction) TTS (Transmitter Training Signal) state configured by the user. When set to up, it enables TTS allowing negotiation of FEC capability only if the neighboring port fcIfAdminFecT…	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.9.289.1.1.2.1.43
fcIfOperFecTtsState The current operating FEC TTS state of the port. The value is down by default. For fcIfOperFecTtsState to come up, both fcIfAdminFECState and fcIfAdminFecTtsState should be configured as up.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.9.289.1.1.2.1.44
fcIfTransceiverPower The current transceiver power status for the interface.	Enumeration Enumerated Values: 0 off 1 on 2 notApplicable	.1.3.6.1.4.1.9.9.289.1.1.2.1.45
fcIfTransceiverPowerControl The transceiver power control setting for the interface.	Enumeration Enumerated Values: 0 off 1 on 2 notSupported	.1.3.6.1.4.1.9.9.289.1.1.2.1.46

This table contains one entry for each trunking fibre
channel port per VSAN. When the FC-port goes
into trunking mode, the fibre channel switch creates
one entry per FC-port for each active VSAN, from the
allowed VSAN list for this port. 
The allowed VSAN list is configured using the objects,
fcIfAllowedVsanList2k and fcIfAllowedVsanList4k. 
If an VSAN becomes inactive then the switch removes the
corresponding entries from this table, if they exist.

fcTrunkIfEntry row .1.3.6.1.4.1.9.9.289.1.1.3.1

Each entry contains trunking FC-port parameters.

Indexes

IF-MIBifIndex CISCO-VSAN-MIBvsanIndex

Column	Syntax	OID
fcTrunkIfOperStatus The operational state of a VSAN on this port. If the port is in trunking mode, it is possible that the port state may be 'down(2)' only in some VSANs. If this port is down in this VSAN only then port state shown by 'ifO…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.9.289.1.1.3.1.1
fcTrunkIfOperStatusCause The cause of current operational state of the port. The current operational state of the port is shown by the 'fcTrunkIfOperStatus'. This object will show 'none(2)' for all the 'fcTrunkIfOperStatus' values except for '…	FcIfOperStatusReason Type Values: 1 other 2 none 3 hwFailure 4 loopbackDiagFailure 5 errorDisabled 6 swFailure 7 linkFailure 8 offline 9 nonParticipating 10 initializing 11 vsanInactive 12 adminDown 13 channelAdminDown 14 channelOperSuspended 15 channelConfigurationInProgress 16 rcfInProgress 17 elpFailureIsolation 18 escFailureIsolation 19 domainOverlapIsolation 20 domainAddrAssignFailureIsolation 21 domainOtherSideEportIsolation 22 domainInvalidRCFReceived 23 domainManagerDisabled 24 zoneMergeFailureIsolation 25 vsanMismatchIsolation 26 parentDown 27 srcPortNotBound 28 interfaceRemoved 29 fcotNotPresent 30 fcotVendorNotSupported 31 incompatibleAdminMode 32 incompatibleAdminSpeed 33 suspendedByMode 34 suspendedBySpeed 35 suspendedByWWN 36 domainMaxReTxFailure 37 eppFailure 38 portVsanMismatchIsolation 39 loopbackIsolation 40 upgradeInProgress 41 incompatibleAdminRxBBCredit 42 incompatibleAdminRxBufferSize 43 portChannelMembersDown 44 zoneRemoteNoRespIsolation 45 firstPortUpAsEport 46 firstPortNotUp 47 peerFCIPPortClosedConnection 48 peerFCIPPortResetConnection 49 fcipPortMaxReTx 50 fcipPortKeepAliveTimerExpire 51 fcipPortPersistTimerExpire 52 fcipPortSrcLinkDown 53 fcipPortSrcAdminDown 54 fcipPortAdminCfgChange 55 fcipSrcPortRemoved 56 fcipSrcModuleNotOnline 57 invalidConfig 58 portBindFailure 59 portFabricBindFailure 60 noCommonVsanIsolation 61 ficonVsanDown 62 invalidAttachment 63 portBlocked 64 incomAdminRxBBCreditPerBuf 65 tooManyInvalidFLOGIs 66 deniedDueToPortBinding 67 elpFailureRevMismatch 68 elpFailureClassFParamErr 69 elpFailureClassNParamErr 70 elpFailureUnknownFlowCTLCode 71 elpFailureInvalidFlowCTLParam 72 elpFailureInvalidPortName 73 elpFailureInvalidSwitchName 74 elpFailureRatovEdtovMismatch 75 elpFailureLoopbackDetected 76 elpFailureInvalidTxBBCredit 77 elpFailureInvalidPayloadSize 78 bundleMisCfg 79 bitErrRTThresExceeded 80 linkFailLinkReset 81 linkFailPortInitFail 82 linkFailPortUnusable 83 linkFailLossOfSignal 84 linkFailLossOfSync 85 linkFailNOSRcvd 86 linkFailOLSRcvd 87 linkFailDebounceTimeout 88 linkFailLRRcvdB2B 89 linkFailCreditLoss 90 linkFailRxQOverFlow 91 linkFailTooManyINTR 92 linkFailLIPRcvdB2B 93 linkFailCreditLossB2B 94 linkFailOPNYTMOB2B 95 linkFailOPNYRETB2B 96 linkFailLIPF8Rcvd 97 linkFailLineCardPortShutdown 98 fcspAuthenfailure 99 fcotChksumErr 100 ohmsExtLBTest 101 invalidFabricBindExh 102 tovMismatch 103 ficonNotEnabled 104 ficonNoPortnumber 105 ficonBeingEnabled 106 ePortProhibited 107 portGracefulShutdown 108 trunkNotFullyActive 109 fabricBindingSWWNNotFound 110 fabricBindingDomainInvalid 111 fabricBindingDBMismatch 112 fabricBindingNoRspFromPeer 113 vsanSuspended 114 vsanNotFound 115 trackedPortDown 116 ecSuspendedLoop 117 isolatedBundle 118 peerNotSupportBundle 119 portBringupIsolation 120 domainNotAllowedIsolated 121 virtualIvrDomainOverlapIsolation 122 outOfService 123 portAuthFailed 124 bundleStandby 125 portConnectorTypeErr 126 errorDisabledReInitLimitReached 127 ficonDupPortNum 128 localRcf 129 twoSwitchesWithSameWWN 130 invalidOtherSidePrincEFPReqRecd 131 domainOther 132 elpFailureAllZeroPeerWWNRcvd 133 preferredPathIsolation 134 fcRedirectIsolation 135 portActLicenseNotAvailable 136 sdmIsolation 137 fcidAllocationFailed 138 externallyDisabled 139 unavailableNPVUpstreamPort 140 unavailableNPVPrefUpstreamPort 141 sfpReadError 142 stickyDownOnLinkFailure 143 tooManyLinkFlapsErr 144 unidirectionalUDLD 145 txRxLoopUDLD 146 neighborMismatchUDLD 147 authzPending 148 hotStdbyInBundle 149 incompleteConfig 150 incompleteTunnelCfg 151 hwProgrammingFailed 152 tunnelDstUnreachable 153 suspendByMtu 154 sfpInvalid 155 sfpAbsent 156 portCapabilitiesUnknown 157 channelErrDisabled 158 vrfMismatch 159 vrfForwardReferencing 160 dupTunnelConfigDetected 161 primaryVLANDown 162 vrfUnusable 163 errDisableHandShkFailure 164 errDisabledBPDUGuard 165 dot1xSecViolationErrDisabled 166 emptyEchoUDLD 167 vfTaggingCapErr 168 portDisabled 169 tunnelModeNotConfigured 170 tunnelSrcNotConfigured 171 tunnelDstNotConfigured 172 tunnelUnableToResolveSrcIP 173 tunnelUnableToResolveDstIP 174 tunnelVrfDown 175 sifAdminDown 176 phyIntfDown 177 ifSifLimitExceeded 178 sifHoldDown 179 noFcoe 180 dcxCompatMismatch 181 isolateBundleLimitExceeded 182 sifNotBound 183 errDisabledLacpMiscfg 184 satFabricIfDown 185 invalidSatFabricIf 186 noRemoteChassis 187 vicEnableNotReceived 188 vicDisableReceived 189 vlanVsanMappingNotEnabled 190 stpNotFwdingInFcoeMappedVlan 191 moduleOffline 192 udldAggModeLinkFailure 193 stpInconsVpcPeerDisabled 194 setPortStateFailed 195 suspendedByVpc 196 vpcCfgInProgress 197 vpcPeerLinkDown 198 vpcNoRspFromPeer 199 protoPortSuspend 200 tunnelSrcDown 201 cdpInfoUnavailable 202 fexSfpInvalid 203 errDisabledIpConflict 204 fcotClkRateMismatch 205 portGuardTrustSecViolation 206 sdpTimeout 207 satIncompatTopo 208 waitForFlogi 209 satNotConfigured 210 npivNotEnabledInUpstream 211 vsanMismatchWithUpstreamSwPort 212 portGuardBitErrRate 213 portGuardSigLoss 214 portGuardSyncLoss 215 portGuardLinkReset 216 portGuardCreditLoss 217 ipQosMgrPolicyAppFailure 218 pauseRateLimitErrDisabled 219 lstGrpUplinkDown 220 stickyDnLinkFailure 221 routerMacFailure 222 dcxMultipleMsapIds 223 dcxHundredPdusRcvdNoAck 224 enmSatIncompatibleUplink 225 enmLoopDetected 226 nonStickyExternallyDisabled 227 subGroupIdNotAssigned 228 vemUnlicensed 229 profileNotFound 230 nonExistentVlan 231 vlanInvalidType 232 vlanDown 233 vpcPeerUpgrade 234 ipQosDcbxpCompatFailure 235 nonCiscoHbaVfTag 236 domainIdConfigMismatch 237 sfpSpeedMismatch 238 xcvrInitializing 239 xcvrAbsent 240 xcvrInvalid 241 vfcBindingInvalid 242 vlanNotFcoeEnabled 243 pvlanNativeVlanErr 244 ethL2VlanDown 245 ethIntfInvalidBinding 246 pmonFailure 247 l3NotReady 248 speedMismatch 249 flowControlMismatch 250 vdcMode 251 suspendedDueToMinLinks 252 enmPinFailLinkDown 253 inactiveM1PortFpathActiveVlan 254 parentPortDown 255 moduleRemoved 256 corePortMct 257 nonCorePortMct 258 ficonInorderNotActive 259 invalidEncapsulation 260 modemLineDeasserted 261 ipSecHndshkInProgress 262 sfpEthCompliantErr 263 cellularModemUnattached 264 outOfGlblRxBuffers 265 sfpFcCompliantErr 266 ethIntfNotLicensed 267 domainIdsInvalid 268 fabricNameInvalid 269 ficonNoPortSwapLogicalPort 270 ficonInvalidPortNum 271 remotePortInL2vpnDown 272 suspendedDueToNoLacpPdus 273 fcotValidationFailedAtDriver 274 unsupportedTransceiverMd5DigestNotSame 275 unsupportedTransceiver 276 adminStateConfigChange 277 vlanAllowedList 278 vlanAllowedListOverride 279 vlanAllowedListAdd 280 vlanAllowedRemove 281 vlanCfgStateChange 282 vlanCfgDelete 283 pppPeerNotResponding 284 pppAuthFailed 285 xcvrAuthFailed 286 badFramesRcvdFromLink	.1.3.6.1.4.1.9.9.289.1.1.3.1.2
fcTrunkIfOperStatusCauseDescr The description for the cause of current operational state of the port, shown by the object 'fcTrunkIfOperStatusCause'.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.3.1.3

This table contains, one entry for each Nx_Port
attached to a particular FC-port in this VSAN in the
Fabric element.
Each entry contains services parameters established 
from the most recent Fabric Login, explicit or 
implicit. In case of private devices attached to port,
the fabric switch does the login on behalf of the
private device. The fabric switch creates or deletes an
entry in this table.
Note: An FC-port may have one or more Nx_Port 
logged-in to it.

fcIfFLoginEntry row .1.3.6.1.4.1.9.9.289.1.1.5.1

An entry containing service parameters established
by a successful Fabric Login to the port indicated
by ifIndex.

Indexes

IF-MIBifIndex CISCO-VSAN-MIBvsanIndex fcIfNxLoginIndex

Column	Syntax	OID
fcIfNxLoginIndex An arbitrary value identifying the associated Nx_Port in the attachment for which the entry contains information.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.1.5.1.1
fcIfNxPortNodeName The world wide name of the Remote Node the logged-in Nx_Port belongs to.	CISCO-ST-TCFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.9.9.289.1.1.5.1.2
fcIfNxPortName The world wide name of the logged-in Nx_Port.	CISCO-ST-TCFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.9.9.289.1.1.5.1.3
fcIfNxPortAddress The address identifier that has been assigned to the logged-in Nx_Port.	CISCO-ST-TCFcAddressId Type Constraints: range: 3	.1.3.6.1.4.1.9.9.289.1.1.5.1.4
fcIfNxFcphVersionAgreed The version of FC-PH that the Fx_Port has agreed to support from the Fabric Login.	FcphVersion Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.5.1.5
fcIfNxRxBbCredit The maximum number of receive buffers available for holding Class 2, Class 3 received from the logged-in Nx_Port. It is for buffer-to-buffer flow control in the incoming direction from the logged-in Nx_Port to FC-port.	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.5.1.6
fcIfNxTxBbCredit The total number of buffers available for holding Class 2, Class 3 frames to be transmitted to the logged-in Nx_Port. It is for buffer-to-buffer flow control in the direction from FC-Port to Nx_Port. The buffer-to-b…	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.5.1.7
fcIfNxClass2RxDataFieldSize The Class 2 Receive Data Field Size of the logged-in Nx_Port. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the Nx_Port.	FcRxDataFieldSize Type Constraints: range: 128..2112	.1.3.6.1.4.1.9.9.289.1.1.5.1.8
fcIfNxClass3RxDataFieldSize The Class 3 Receive Data Field Size of the logged-in Nx_Port. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the Nx_Port.	FcRxDataFieldSize Type Constraints: range: 128..2112	.1.3.6.1.4.1.9.9.289.1.1.5.1.9
fcIfNxCosSuppAgreed The object indicating the classes of services that the logged-in Nx_Port has requested the FC-Port to support and the FC-Port has granted the request.	CISCO-ST-TCFcClassOfServices Type Values: 0 classF 1 class1 2 class2 3 class3 4 class4 5 class5 6 class6	.1.3.6.1.4.1.9.9.289.1.1.5.1.10
fcIfNxClass2SeqDelivAgreed The object indicating whether the FC-Port has agreed to support Class 2 sequential delivery during the Fabric Login. This is meaningful only if Class 2 service has been agreed. This object is applicable only to Fx_Por…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.5.1.11
fcIfNxClass3SeqDelivAgreed The flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery during the Fabric Login. This is meaningful only if Class 3 service has been agreed. This object is applicable only to Fx_Ports.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.5.1.12

This table contains, one entry for each local
Interconnect_Port that has performed Exchange Link
Parameters Switch Fabric Internal Link Service
exchange with its peer Interconnect_Port.
Each entry contains Exchange Link Parameters
established from the most recent ELP exchange between
the 2 Interconnect_Port.
The agent creates and deletes each entry in this 
table. The agent creates an entry in this table on a
successful completion of a ELP exchange. Similarly the
agent deletes the entry when the port goes down.
NOTE: Port Channel ports are not represented in 
this table.

fcIfElpEntry row .1.3.6.1.4.1.9.9.289.1.1.6.1

An entry containing Exchange Link parameters
established between the Interconnect_Port indicated
by ifIndex and the peer Interconnect_Port indicated by
fcIfElpNbrPortName.

Indexes

IF-MIBifIndex

Column	Syntax	OID
fcIfElpNbrNodeName The node world wide name of the peer Node.	CISCO-ST-TCFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.9.9.289.1.1.6.1.1
fcIfElpNbrPortName The port world wide name of the peer Interconnect_Port.	CISCO-ST-TCFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.9.9.289.1.1.6.1.2
fcIfElpRxBbCredit The maximum number of receive buffers available for holding Class 2, Class 3, Class F frames received from the peer Interconnect_Port. It is for buffer-to-buffer flow control in the incoming direction from the peer Int…	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.6.1.3
fcIfElpTxBbCredit The total number of buffers available for holding Class 2, Class 3, Class F frames to be transmitted to the peer Interconnect_Port. It is for buffer-to-buffer flow control in the direction from the local Interconnec…	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.6.1.4
fcIfElpCosSuppAgreed The object indicating the classes of services that the peer Interconnect_Port has requested the local Interconnect_Port to support and the local Interconnect_Port has granted the request.	CISCO-ST-TCFcClassOfServices Type Values: 0 classF 1 class1 2 class2 3 class3 4 class4 5 class5 6 class6	.1.3.6.1.4.1.9.9.289.1.1.6.1.5
fcIfElpClass2SeqDelivAgreed The object indicating whether the local Interconnect_Port has agreed to support Class 2 sequential delivery during the Exchange Link Parameters Switch Fabric Internal Link Service request. This is meaningful only if …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.6.1.6
fcIfElpClass2RxDataFieldSize The Class 2 Receive Data Field Size of the peer Interconnect_Port. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the Interconnect_Port. This is meaningful only if Class 2…	FcRxDataFieldSize Type Constraints: range: 128..2112	.1.3.6.1.4.1.9.9.289.1.1.6.1.7
fcIfElpClass3SeqDelivAgreed The object indicating whether the local Interconnect_Port has agreed to support Class 3 sequential delivery during the Exchange Link Parameters Switch Fabric Internal Link Service request. This is meaningful only if …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.6.1.8
fcIfElpClass3RxDataFieldSize The Class 3 Receive Data Field Size of the peer Interconnect_Port. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the Interconnect_Port. This is meaningful only if Class 3…	FcRxDataFieldSize Type Constraints: range: 128..2112	.1.3.6.1.4.1.9.9.289.1.1.6.1.9
fcIfElpClassFXII The object when true(1) indicates that the peer Interconnect_Port supplying this parameter requires that an interlock be used during X_ID assignment in Class F. This is meaningful only if Class F service has been agree…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.6.1.10
fcIfElpClassFRxDataFieldSize The Class F Receive Data Field Size of the peer Interconnect_Port. Class F service is always agreed between two Interconnect_Ports, and thus this object is always meaningful. This object specifies the largest Data Field…	FcRxDataFieldSize Type Constraints: range: 128..2112	.1.3.6.1.4.1.9.9.289.1.1.6.1.11
fcIfElpClassFConcurrentSeq The object indicating the number of sequence status blocks provided by the Interconnect_Port supplying the parameters for tracking the progress of a sequence as a sequence recipient. The maximum number of concurrent se…	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.9.9.289.1.1.6.1.12
fcIfElpClassFEndToEndCredit The object indicating the maximum number of Class F data frames which can be transmitted by an Interconnect_Port without receipt of accompanying ACK or Link_Response frames. The minimum value of end-to-end credit is one…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.1.6.1.13
fcIfElpClassFOpenSeq The value of the open sequences per exchange shall specify the maximum number of sequences that can be open at one time at the recipient between a pair of Interconnect_Ports for one exchange. This value is used for ex…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.1.6.1.14

This table contains, one entry for each FC-Port.
It contains information describing about what each
FC-port is inherently capable in its current 
configuration of operating or supporting.
Entries in this table are created/deleted on an 
as-needed basis by the agent. This table shows the
capability of this port hardware as currently 
configured.
NOTE: This table has objects which represent the
characteristics of a physical port. Thus, Port 
Channel ports are not represented in this table. 
The recommended method to get the current capability
for the objects affected by the setting of 
fcIfPortRateMode is to inspect the relevant objects in
whichever table corresponds to the value of 
fcIfPortRateMode.  As a result, the relevant objects in
this table have been deprecated.

fcIfCapEntry row .1.3.6.1.4.1.9.9.289.1.1.7.1

Each entry contains the Capability of a FC-Port.

Indexes

IF-MIBifIndex

Column	Syntax	OID
fcIfCapFcphVersionHigh The highest version of FC-PH that the FC-Port is capable of supporting.	FcphVersion Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.7.1.1
fcIfCapFcphVersionLow The lowest version of FC-PH that the FC-Port is capable of supporting.	FcphVersion Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.7.1.2
fcIfCapRxBbCreditMaxdeprecated The maximum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx mode.	buffersFcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.7.1.3
fcIfCapRxBbCreditMindeprecated The minimum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx mode.	buffersFcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.7.1.4
fcIfCapRxDataFieldSizeMax The maximum size in bytes of the Data Field in a frame that the FC-Port is capable of receiving from its attached FC-port.	FcRxDataFieldSize Type Constraints: range: 128..2112	.1.3.6.1.4.1.9.9.289.1.1.7.1.5
fcIfCapRxDataFieldSizeMin The minimum size in bytes of the Data Field in a frame that the FC-Port is capable of receiving from its attached FC-port.	FcRxDataFieldSize Type Constraints: range: 128..2112	.1.3.6.1.4.1.9.9.289.1.1.7.1.6
fcIfCapCos The Bit mask indicating the set of Classes of Service that the FC-Port is capable of supporting.	CISCO-ST-TCFcClassOfServices Type Values: 0 classF 1 class1 2 class2 3 class3 4 class4 5 class5 6 class6	.1.3.6.1.4.1.9.9.289.1.1.7.1.7
fcIfCapClass2SeqDeliv The flag indicating whether or not the FC-Port is capable of supporting Class 2 Sequential Delivery.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.7.1.8
fcIfCapClass3SeqDeliv The flag indicating whether or not the FC-Port is capable of supporting Class 3 Sequential Delivery.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.7.1.9
fcIfCapHoldTimeMax The maximum holding time ( in microseconds ) that the FC-Port is capable of supporting.	CISCO-TCMicroSeconds	.1.3.6.1.4.1.9.9.289.1.1.7.1.10
fcIfCapHoldTimeMin The minimum holding time ( in microseconds ) that the FC-Port is capable of supporting.	CISCO-TCMicroSeconds	.1.3.6.1.4.1.9.9.289.1.1.7.1.11
fcIfCapISLRxBbCreditMaxdeprecated The maximum number of receive buffers the port hardware is capable of receiving from the attached Inter Connect port. This object is applicable to ports operating in xE_port mode.	buffersFcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.7.1.12
fcIfCapISLRxBbCreditMindeprecated The minimum number of receive buffers the port hardware is capable of receiving from the attached xE_port or B_port. This object is applicable to ports operating in xE_port mode.	buffersFcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.7.1.13
fcIfCapRxBbCreditWriteabledeprecated The value indicating whether the port is capable of allowing the user to configure receive buffer to buffer credit. The values configured for the objects: fcIfAdminRxBbCredit, fcIfAdminRxBbCreditModeISL, fcIfAdminRxBbC…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.7.1.14
fcIfCapRxBbCreditDefaultdeprecated The default receive buffer-to-buffer credits if the port is operating in Fx mode.	buffersFcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.7.1.15
fcIfCapISLRxBbCreditDefaultdeprecated The default receive buffer-to-buffer credits if the port is operating in xE_port mode.	buffersFcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.7.1.16
fcIfCapBbScnCapable Indicates whether this interface is capable of handling buffer-to-buffer state change number. 'true' : capable of handling. 'false' : it is not capable of handling it.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.7.1.17
fcIfCapBbScnMax The maximum buffer-to-buffer state change number this interface can handle.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.1.7.1.18
fcIfCapOsmFrmCapable This value indicates whether this interface is capable to operate in different port rate modes. 'true' : the port is capable of being configured with the mode it is to operate in, e.g., a port which ca…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.7.1.19
fcIfIsServiceStateCapable Indicates whether this interface is capable of handling service state change. 'true' : capable of changing the service state of the interface. This means that the user can configure the object fcIfSe…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.7.1.20
fcIfIsPortRateModeCapable Indicates whether this interface is capable of being configured in either of 'dedicated' or 'shared' port rate modes. 'true' : capable of changing the port rate mode of the interface. The user can con…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.7.1.21
fcIfIsAdminRxBbCreditExtendedCapable Indicates whether extended buffer-to-buffer credit feature can be enabled on a given interface. 'true' : capable of changing the extended buffer-to-buffer credits on the interface. The user can configure t…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.7.1.22

This table contains, one entry for each FC-Port
which is capable of operating in over subscription port
rate mode.
It contains information describing about what each
FC-port is inherently capable of operating or 
supporting in over subscription mode.   
Entries in this table are created/deleted on an 
as-needed basis by the agent. 
NOTE: This table has objects which represent the
characteristics of a physical port. Thus, Port 
Channel ports are not represented in this table.

fcIfCapOsmEntry row .1.3.6.1.4.1.9.9.289.1.1.11.1

Each entry contains the Capability of a FC-Port
operating in over subscribed mode.

Indexes

IF-MIBifIndex

Column	Syntax	OID
fcIfCapOsmRxBbCreditWriteable The value indicating whether the port operating in over subscribed mode is capable of allowing the user to configure receive buffer to buffer credit. The values configured for the objects: fcIfAdminRxBbCredit, fcIfAdmi…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.11.1.1
fcIfCapOsmRxBbCreditMax The maximum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx mode. .	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.11.1.2
fcIfCapOsmRxBbCreditMin The minimum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx mode.	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.11.1.3
fcIfCapOsmRxBbCreditDefault The default receive buffer-to-buffer credits if the port is operating in Fx mode.	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.11.1.4
fcIfCapOsmISLRxBbCreditMax The maximum number of receive buffers the port hardware is capable of receiving from the attached Inter Connect port. This object is applicable to ports operating in inter switch link mode.	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.11.1.5
fcIfCapOsmISLRxBbCreditMin The minimum number of receive buffers the port hardware is capable of receiving from the attached xE_port or B_port. This object is applicable to ports operating in inter switch link mode.	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.11.1.6
fcIfCapOsmISLRxBbCreditDefault The default receive buffer-to-buffer credits if the port is operating in inter switch link mode.	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.11.1.7
fcIfCapOsmRxPerfBufWriteable The value indicating whether the port is capable of allowing the user to configure receive performance buffers. The values configured for the objects: fcIfAdminRxPerfBuffer will take effect only if the value of this o…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.11.1.8
fcIfCapOsmRxPerfBufMax The maximum number of performance buffers that can be configured for this port. The object is applicable to ports operating in Fx mode.	FcPerfBuffer Type Constraints: range: 0..145	.1.3.6.1.4.1.9.9.289.1.1.11.1.9
fcIfCapOsmRxPerfBufMin The minimum number of performance buffers that can be configured for this port. The object is applicable to ports operating in Fx mode.	FcPerfBuffer Type Constraints: range: 0..145	.1.3.6.1.4.1.9.9.289.1.1.11.1.10
fcIfCapOsmRxPerfBufDefault The default performance buffers if the port is operating in Fx mode. The object is applicable to ports operating in Fx mode.	FcPerfBuffer Type Constraints: range: 0..145	.1.3.6.1.4.1.9.9.289.1.1.11.1.11
fcIfCapOsmISLRxPerfBufMax The maximum number of performance buffers that can be configured for this port. This object is applicable to inter switch link ports.	FcPerfBuffer Type Constraints: range: 0..145	.1.3.6.1.4.1.9.9.289.1.1.11.1.12
fcIfCapOsmISLRxPerfBufMin The minimum number of performance buffers that can be configured for this port. This object is applicable to inter switch link ports.	FcPerfBuffer Type Constraints: range: 0..145	.1.3.6.1.4.1.9.9.289.1.1.11.1.13
fcIfCapOsmISLRxPerfBufDefault The default performance buffers if the port is operating as an inter switch link port.	FcPerfBuffer Type Constraints: range: 0..145	.1.3.6.1.4.1.9.9.289.1.1.11.1.14

This table contains, one entry for each FC-Port
which is capable of operating in Full Rate mode.
It contains information describing about what each
FC-port is inherently capable of operating or 
supporting in full rate mode. 
Entries in this table are created/deleted on an 
as-needed basis by the agent.
NOTE: This table has objects which represent the
characteristics of a physical port. Thus, Port 
Channel ports are not represented in this table.

fcIfCapFrmEntry row .1.3.6.1.4.1.9.9.289.1.1.12.1

Each entry contains the Capability of a FC-Port
operating in Full Rate mode.

Indexes

IF-MIBifIndex

Column	Syntax	OID
fcIfCapFrmRxBbCreditWriteable The value indicating whether the port operating in full rate mode is capable of allowing the user to configure receive buffer to buffer credit. The values configured for the objects: fcIfAdminRxBbCredit, fcIfAdminRxBbC…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.12.1.1
fcIfCapFrmRxBbCreditMax The maximum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx mode.	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.12.1.2
fcIfCapFrmRxBbCreditMin The minimum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx mode.	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.12.1.3
fcIfCapFrmRxBbCreditDefault The default receive buffer-to-buffer credits if the port is operating in Fx mode.	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.12.1.4
fcIfCapFrmISLRxBbCreditMax The maximum number of receive buffers the port hardware is capable of receiving from the attached Inter Connect port. This object is applicable to ports operating in inter switch link mode.	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.12.1.5
fcIfCapFrmISLRxBbCreditMin The minimum number of receive buffers the port hardware is capable of receiving from the attached xE_port or B_port. This object is applicable to ports operating in inter switch link mode.	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.12.1.6
fcIfCapFrmISLRxBbCreditDefault The default receive buffer-to-buffer credits if the port is operating in inter switch link mode.	FcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.4.1.9.9.289.1.1.12.1.7
fcIfCapFrmRxPerfBufWriteable The value indicating whether the port is capable of allowing the user to configure receive performance buffers. The values configured for the objects: fcIfAdminRxPerfBuffer will take effect only if the value of this o…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.12.1.8
fcIfCapFrmRxPerfBufMax The maximum number of performance buffers that can be configured for this port. The object is applicable to ports operating in Fx mode.	FcPerfBuffer Type Constraints: range: 0..145	.1.3.6.1.4.1.9.9.289.1.1.12.1.9
fcIfCapFrmRxPerfBufMin The minimum number of performance buffers that can be configured for this port. The object is applicable to ports operating in Fx mode.	FcPerfBuffer Type Constraints: range: 0..145	.1.3.6.1.4.1.9.9.289.1.1.12.1.10
fcIfCapFrmRxPerfBufDefault The default performance buffers if the port is operating in Fx mode. The object is applicable to ports operating in Fx mode.	FcPerfBuffer Type Constraints: range: 0..145	.1.3.6.1.4.1.9.9.289.1.1.12.1.11
fcIfCapFrmISLRxPerfBufMax The maximum number of performance buffers that can be configured for this port. This object is applicable to inter switch link ports.	FcPerfBuffer Type Constraints: range: 0..145	.1.3.6.1.4.1.9.9.289.1.1.12.1.12
fcIfCapFrmISLRxPerfBufMin The minimum number of performance buffers that can be configured for this port. This object is applicable to inter switch link ports.	FcPerfBuffer Type Constraints: range: 0..145	.1.3.6.1.4.1.9.9.289.1.1.12.1.13
fcIfCapFrmISLRxPerfBufDefault The default performance buffers if the port is operating as an inter switch link port.	FcPerfBuffer Type Constraints: range: 0..145	.1.3.6.1.4.1.9.9.289.1.1.12.1.14

A table listing the peer node identification data per
port per VSAN.

fcIfRNIDInfoEntry row .1.3.6.1.4.1.9.9.289.1.1.13.1

Each entry provides node identification data of the
peer. This data is got through performing
request-node-identification-data(RNID) extended link
service. The table would have entry for each port,
identified by ifInd…

Indexes

IF-MIBifIndex CISCO-VSAN-MIBvsanIndex

Column	Syntax	OID
fcIfRNIDInfoStatus This object specifies the status of the row, is valid, invalid or old. The only value that can be assigned by the Network Management System(NMS) is invalid(2). The NMS cannot set this object to any other value (i.e val…	Enumerationr/w Enumerated Values: 1 valid 2 invalid 3 old	.1.3.6.1.4.1.9.9.289.1.1.13.1.1
fcIfRNIDInfoTypeNumber The type number of the peer node. For example the type number could be 002105.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.13.1.2
fcIfRNIDInfoModelNumber The model number of the peer node. For example the model number could be F20.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.13.1.3
fcIfRNIDInfoManufacturer The name of the the company that manufactured the peer node. For example the Manufacturer info could be HTC.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.13.1.4
fcIfRNIDInfoPlantOfMfg The plant code that identifies the plant of manufacture of the peer node. For example the plant code of manufacture could be 00.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.13.1.5
fcIfRNIDInfoSerialNumber The sequence number assigned to the peer node during manufacturing. For example the serial number could be 000000023053.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.289.1.1.13.1.6
fcIfRNIDInfoUnitType The type of the peer node that this port is communicating. channel - Host controlUnit - Disk fabric - Another SAN switch unknown - if fcIfRNIDInfoStatus is 'invalid' this …	Enumeration Enumerated Values: 1 channel 2 controlUnit 3 fabric 4 unknown	.1.3.6.1.4.1.9.9.289.1.1.13.1.7
fcIfRNIDInfoPortId The identifier of the port in the peer node connected to this port. If the peer node is a channel, as described by the instance of fcIfRNIDInfoUnitType, then fcIfRNIDInfoPortId will be the CHPID (Channel…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.9.9.289.1.1.13.1.8

This table contains one entry per fibre channel switch
Gigabit Ethernet (GigE) interface. 
          
This table also provides an easy way to find out 
whether a GigE interface is part of an port 
channel or not.
          
The table is indexed by the 'ifIndex' of the GigE
port in the fiber channel switch.

fcIfGigEEntry row .1.3.6.1.4.1.9.9.289.1.1.14.1

Each entry contains GigE port configuration and
state information.

Indexes

IF-MIBifIndex

Column	Syntax	OID
fcIfGigEPortChannelIfIndex The ifIndex of the ether channel port this GigE port belongs to. A value of zero indicates that this GigE port is not part of any port channel. For port channel port this object will have the ifIndex of the port channe…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.289.1.1.14.1.1
fcIfGigEAutoNegotiate This object Indicates whether auto-negotiation (of speed and duplex mode) should be used on this interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.9.9.289.1.1.14.1.2
fcIfGigEBeaconMode In Beacon mode, an interface LED is put into flashing mode for easy identification of a particular interface. The Beacon mode configured by the user. If 'true', the Beacon mode is enabled. If 'false', the beacon mode is…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.14.1.3
fcIfGigConnectorType The module type of the port connector. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., the value is instantiated but its value is irrelevant.	CISCO-ST-TCFcPortModuleTypes Type Values: 1 unknown 2 other 3 gbic 4 embedded 5 glm 6 gbicWithSerialID 7 gbicWithoutSerialID 8 sfpWithSerialID 9 sfpWithoutSerialID 10 xfp 11 x2Short 12 x2Medium 13 x2Tall 14 xpakShort 15 xpakMedium 16 xpakTall 17 xenpak 18 sfpDwdm 19 qsfp 20 x2Dwdm	.1.3.6.1.4.1.9.9.289.1.1.14.1.4
fcIfGigEAdminSpeed This object specifies the configured speed of IPStorage port. 'notApplicable' - The read-only value 'notApplicable' indicates that the speed change is not applicable. 'oneGigSpeed' - The…	Enumerationr/w Enumerated Values: 1 notApplicable 2 oneGigSpeed 3 tenGigSpeed 4 twentyFiveGigSpeed 5 fortyGigspeed	.1.3.6.1.4.1.9.9.289.1.1.14.1.5
fcIfGigEOperStatusCause This object indicates the cause of the current operational state of the ipstorage port. The current operational state of the port is shown by the 'ifOperStatus' defined in IF-MIB. This object will show 'none(2)' for al…	FcIfOperStatusReason Type Values: 1 other 2 none 3 hwFailure 4 loopbackDiagFailure 5 errorDisabled 6 swFailure 7 linkFailure 8 offline 9 nonParticipating 10 initializing 11 vsanInactive 12 adminDown 13 channelAdminDown 14 channelOperSuspended 15 channelConfigurationInProgress 16 rcfInProgress 17 elpFailureIsolation 18 escFailureIsolation 19 domainOverlapIsolation 20 domainAddrAssignFailureIsolation 21 domainOtherSideEportIsolation 22 domainInvalidRCFReceived 23 domainManagerDisabled 24 zoneMergeFailureIsolation 25 vsanMismatchIsolation 26 parentDown 27 srcPortNotBound 28 interfaceRemoved 29 fcotNotPresent 30 fcotVendorNotSupported 31 incompatibleAdminMode 32 incompatibleAdminSpeed 33 suspendedByMode 34 suspendedBySpeed 35 suspendedByWWN 36 domainMaxReTxFailure 37 eppFailure 38 portVsanMismatchIsolation 39 loopbackIsolation 40 upgradeInProgress 41 incompatibleAdminRxBBCredit 42 incompatibleAdminRxBufferSize 43 portChannelMembersDown 44 zoneRemoteNoRespIsolation 45 firstPortUpAsEport 46 firstPortNotUp 47 peerFCIPPortClosedConnection 48 peerFCIPPortResetConnection 49 fcipPortMaxReTx 50 fcipPortKeepAliveTimerExpire 51 fcipPortPersistTimerExpire 52 fcipPortSrcLinkDown 53 fcipPortSrcAdminDown 54 fcipPortAdminCfgChange 55 fcipSrcPortRemoved 56 fcipSrcModuleNotOnline 57 invalidConfig 58 portBindFailure 59 portFabricBindFailure 60 noCommonVsanIsolation 61 ficonVsanDown 62 invalidAttachment 63 portBlocked 64 incomAdminRxBBCreditPerBuf 65 tooManyInvalidFLOGIs 66 deniedDueToPortBinding 67 elpFailureRevMismatch 68 elpFailureClassFParamErr 69 elpFailureClassNParamErr 70 elpFailureUnknownFlowCTLCode 71 elpFailureInvalidFlowCTLParam 72 elpFailureInvalidPortName 73 elpFailureInvalidSwitchName 74 elpFailureRatovEdtovMismatch 75 elpFailureLoopbackDetected 76 elpFailureInvalidTxBBCredit 77 elpFailureInvalidPayloadSize 78 bundleMisCfg 79 bitErrRTThresExceeded 80 linkFailLinkReset 81 linkFailPortInitFail 82 linkFailPortUnusable 83 linkFailLossOfSignal 84 linkFailLossOfSync 85 linkFailNOSRcvd 86 linkFailOLSRcvd 87 linkFailDebounceTimeout 88 linkFailLRRcvdB2B 89 linkFailCreditLoss 90 linkFailRxQOverFlow 91 linkFailTooManyINTR 92 linkFailLIPRcvdB2B 93 linkFailCreditLossB2B 94 linkFailOPNYTMOB2B 95 linkFailOPNYRETB2B 96 linkFailLIPF8Rcvd 97 linkFailLineCardPortShutdown 98 fcspAuthenfailure 99 fcotChksumErr 100 ohmsExtLBTest 101 invalidFabricBindExh 102 tovMismatch 103 ficonNotEnabled 104 ficonNoPortnumber 105 ficonBeingEnabled 106 ePortProhibited 107 portGracefulShutdown 108 trunkNotFullyActive 109 fabricBindingSWWNNotFound 110 fabricBindingDomainInvalid 111 fabricBindingDBMismatch 112 fabricBindingNoRspFromPeer 113 vsanSuspended 114 vsanNotFound 115 trackedPortDown 116 ecSuspendedLoop 117 isolatedBundle 118 peerNotSupportBundle 119 portBringupIsolation 120 domainNotAllowedIsolated 121 virtualIvrDomainOverlapIsolation 122 outOfService 123 portAuthFailed 124 bundleStandby 125 portConnectorTypeErr 126 errorDisabledReInitLimitReached 127 ficonDupPortNum 128 localRcf 129 twoSwitchesWithSameWWN 130 invalidOtherSidePrincEFPReqRecd 131 domainOther 132 elpFailureAllZeroPeerWWNRcvd 133 preferredPathIsolation 134 fcRedirectIsolation 135 portActLicenseNotAvailable 136 sdmIsolation 137 fcidAllocationFailed 138 externallyDisabled 139 unavailableNPVUpstreamPort 140 unavailableNPVPrefUpstreamPort 141 sfpReadError 142 stickyDownOnLinkFailure 143 tooManyLinkFlapsErr 144 unidirectionalUDLD 145 txRxLoopUDLD 146 neighborMismatchUDLD 147 authzPending 148 hotStdbyInBundle 149 incompleteConfig 150 incompleteTunnelCfg 151 hwProgrammingFailed 152 tunnelDstUnreachable 153 suspendByMtu 154 sfpInvalid 155 sfpAbsent 156 portCapabilitiesUnknown 157 channelErrDisabled 158 vrfMismatch 159 vrfForwardReferencing 160 dupTunnelConfigDetected 161 primaryVLANDown 162 vrfUnusable 163 errDisableHandShkFailure 164 errDisabledBPDUGuard 165 dot1xSecViolationErrDisabled 166 emptyEchoUDLD 167 vfTaggingCapErr 168 portDisabled 169 tunnelModeNotConfigured 170 tunnelSrcNotConfigured 171 tunnelDstNotConfigured 172 tunnelUnableToResolveSrcIP 173 tunnelUnableToResolveDstIP 174 tunnelVrfDown 175 sifAdminDown 176 phyIntfDown 177 ifSifLimitExceeded 178 sifHoldDown 179 noFcoe 180 dcxCompatMismatch 181 isolateBundleLimitExceeded 182 sifNotBound 183 errDisabledLacpMiscfg 184 satFabricIfDown 185 invalidSatFabricIf 186 noRemoteChassis 187 vicEnableNotReceived 188 vicDisableReceived 189 vlanVsanMappingNotEnabled 190 stpNotFwdingInFcoeMappedVlan 191 moduleOffline 192 udldAggModeLinkFailure 193 stpInconsVpcPeerDisabled 194 setPortStateFailed 195 suspendedByVpc 196 vpcCfgInProgress 197 vpcPeerLinkDown 198 vpcNoRspFromPeer 199 protoPortSuspend 200 tunnelSrcDown 201 cdpInfoUnavailable 202 fexSfpInvalid 203 errDisabledIpConflict 204 fcotClkRateMismatch 205 portGuardTrustSecViolation 206 sdpTimeout 207 satIncompatTopo 208 waitForFlogi 209 satNotConfigured 210 npivNotEnabledInUpstream 211 vsanMismatchWithUpstreamSwPort 212 portGuardBitErrRate 213 portGuardSigLoss 214 portGuardSyncLoss 215 portGuardLinkReset 216 portGuardCreditLoss 217 ipQosMgrPolicyAppFailure 218 pauseRateLimitErrDisabled 219 lstGrpUplinkDown 220 stickyDnLinkFailure 221 routerMacFailure 222 dcxMultipleMsapIds 223 dcxHundredPdusRcvdNoAck 224 enmSatIncompatibleUplink 225 enmLoopDetected 226 nonStickyExternallyDisabled 227 subGroupIdNotAssigned 228 vemUnlicensed 229 profileNotFound 230 nonExistentVlan 231 vlanInvalidType 232 vlanDown 233 vpcPeerUpgrade 234 ipQosDcbxpCompatFailure 235 nonCiscoHbaVfTag 236 domainIdConfigMismatch 237 sfpSpeedMismatch 238 xcvrInitializing 239 xcvrAbsent 240 xcvrInvalid 241 vfcBindingInvalid 242 vlanNotFcoeEnabled 243 pvlanNativeVlanErr 244 ethL2VlanDown 245 ethIntfInvalidBinding 246 pmonFailure 247 l3NotReady 248 speedMismatch 249 flowControlMismatch 250 vdcMode 251 suspendedDueToMinLinks 252 enmPinFailLinkDown 253 inactiveM1PortFpathActiveVlan 254 parentPortDown 255 moduleRemoved 256 corePortMct 257 nonCorePortMct 258 ficonInorderNotActive 259 invalidEncapsulation 260 modemLineDeasserted 261 ipSecHndshkInProgress 262 sfpEthCompliantErr 263 cellularModemUnattached 264 outOfGlblRxBuffers 265 sfpFcCompliantErr 266 ethIntfNotLicensed 267 domainIdsInvalid 268 fabricNameInvalid 269 ficonNoPortSwapLogicalPort 270 ficonInvalidPortNum 271 remotePortInL2vpnDown 272 suspendedDueToNoLacpPdus 273 fcotValidationFailedAtDriver 274 unsupportedTransceiverMd5DigestNotSame 275 unsupportedTransceiver 276 adminStateConfigChange 277 vlanAllowedList 278 vlanAllowedListOverride 279 vlanAllowedListAdd 280 vlanAllowedRemove 281 vlanCfgStateChange 282 vlanCfgDelete 283 pppPeerNotResponding 284 pppAuthFailed 285 xcvrAuthFailed 286 badFramesRcvdFromLink	.1.3.6.1.4.1.9.9.289.1.1.14.1.6
fcIfGigEServiceState This object idicates the current operational state of the GigE interface.	CISCO-ST-TCFcIfServiceStateTyper/w Type Values: 1 inService 2 outOfService	.1.3.6.1.4.1.9.9.289.1.1.14.1.7

This table is used for configuring the module specific features
for Fibre Channel modules (or whatever equivalent).

fcIfModuleEntry row .1.3.6.1.4.1.9.9.289.1.1.15.1

An entry in fcIfModuleTable. Each entry represents the module
specific attributes.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
fcIfModuleOverSubscriptionRatioConfig This object helps the user to control the restriction on oversubscription ratio on modules that support it. enable(1) - Enables the restriction on oversubscription ratio disable(2) - Disables the restri…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.9.9.289.1.1.15.1.1
fcIfModuleBandwidthFairnessConfig This object helps the user to control bandwidth fairness on modules that support it. enable(1) - Enables the bandwidth fairness disable(2) - Disables the bandwidth fairness notApplicable(3) - This valu…	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 notApplicable	.1.3.6.1.4.1.9.9.289.1.1.15.1.2
fcIfModuleBandwidthFairnessOper The operational status of bandwidth fairness on the module. enabled(1) - Bandwidth fairness is enabled on the module disabled(2) - Bandwidth fairness is disabled on the module notApplicable(3) - This v…	Enumeration Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.9.9.289.1.1.15.1.3
fcIfModuleXcvrFrequencyConfig This object specifies the transceiver frequency of this module. notApplicable(1) - This value is read-only and is always returned for module which does not support t…	Enumerationr/w Enumerated Values: 1 notApplicable 2 xcvrFreqX2FC 3 xcvrFreqX2Eth	.1.3.6.1.4.1.9.9.289.1.1.15.1.4

In certain scenarios, when an interface in a system
transitions to a down state due to a particular reason, it is 
likely for the interface to keep flapping between up and down 
states continuously. The objects in each entry of this table 
help in controlling such behaviour on an interface by stopping 
such frequent transitions and holding the interface in down 
state, if a stipulated number of such toggles happen in a given 
duration, as described in the objects. 
Per each reason for which the interface flaps, an entry in this
table can be used to configure the following: whether or not 
the flapping should be controlled on the interface, the allowed
number of flaps and the allowed duration before the interface
is held in down state.

fcIfFlapCtrlConfigEntry row .1.3.6.1.4.1.9.9.289.1.1.17.1

An entry in the fcIfFlapCtrlConfigTable.

Indexes

fcIfFlapCtrlConfigReason IF-MIBifIndex

Column	Syntax	OID
fcIfFlapCtrlConfigReason This object indicates the reason for which a port can be allowed to toggle between up and down states. linkFailure (1) - physical link failure. trustSecViolation (2) - Cisco Trusted Security violation. bitErrorRate (3) …	Enumeration Enumerated Values: 1 linkFailure 2 trustSecViolation 3 bitErrorRate 4 signalLoss 5 syncLoss 6 linkReset 7 creditLoss	.1.3.6.1.4.1.9.9.289.1.1.17.1.1
fcIfFlapCtrlConfigEnable This object specifies if an interface can be stopped from toggling between up and down states or allowed to toggle continuously. If 'true', the interface will be stopped from toggling between up and down…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.289.1.1.17.1.2
fcIfFlapCtrlConfigDuration This object specifies the time duration in which the port is allowed to toggle as many as the number of times given by fcIfFlapCtrlConfigNumFlaps. When fcIfFlapCtrlConfigEnable is 'false', this object does not take effe…	secondsUnsigned32r/w Constraints: range: 1-2000000	.1.3.6.1.4.1.9.9.289.1.1.17.1.3
fcIfFlapCtrlConfigNumFlaps This object specifies the number of times a port can flap in the duration given by fcIfFlapCtrlConfigDuration. When fcIfFlapCtrlConfigEnable is 'false', this object does not take effect and its value cannot be changed.	Unsigned32r/w Constraints: range: 1-1023	.1.3.6.1.4.1.9.9.289.1.1.17.1.4

This table contains, one entry for each fabric
channel port( including any Port Channel ports ). It 
contains counters that record the errors detected.
This table is an extension to interfaces group defined
in IF-MIB. It contains additional errors specific
to this device.

fcIfErrorEntry row .1.3.6.1.4.1.9.9.289.1.2.1.1

Each entry contains error counters of a fabric
channel port.

Indexes

IF-MIBifIndex

Column	Syntax	OID
fcIfLinkFailures The number of link failures detected by the FC-Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.1
fcIfSyncLosses The number of loss of synchronization failures detected by the FC-Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.2
fcIfSigLosses The number of signal losses detected by the FC-Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.3
fcIfPrimSeqProtoErrors The number of primitive sequence protocol errors detected by the FC-Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.4
fcIfInvalidTxWords The number of invalid transmission words detected by the FC-Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.5
fcIfInvalidCrcs The number of invalid CRCs detected by the FC-Port. Loop ports should not count CRC errors passing through when monitoring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.6
fcIfDelimiterErrors The number of Delimiter Errors detected by the FC-Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.7
fcIfAddressIdErrors The number of address identifier errors detected by the FC-Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.8
fcIfLinkResetIns The number of link reset protocol errors received by the FC-Port from the attached FC-port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.9
fcIfLinkResetOuts The number of link reset protocol errors issued by the FC-Port to the attached FC-Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.10
fcIfOlsIns The number of Offline Sequence errors received by the FC-Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.11
fcIfOlsOuts The number of Offline Sequence errors issued by the FC-Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.12
fcIfRuntFramesIn The number of frames received by the FC-port that are shorter than the minimum allowable frame length regardless if the CRC is good or not.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.13
fcIfJabberFramesIn The number of frames received by the FC-port that are longer than a maximum frame length and also have a CRC error.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.14
fcIfTxWaitCount The number of times the FC-port waited due to lack of transmit credits.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.15
fcIfFramesTooLong The number of frames received by the FC-port where the frame length was greater than what was agreed to in FLOGI/PLOGI. This could be caused by losing the end of frame delimiter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.16
fcIfFramesTooShort The number of frames received by the FC-port where the frame length was less than the minimum indicated by the frame header (normally 24 bytes), but it could be more if the DFCTL field indicates an optional header shou…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.17
fcIfLRRIn The number of Link reset responses received by the FC-port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.18
fcIfLRROut The number of Link reset responses transmitted by the FC-port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.19
fcIfNOSIn The number of non-operational sequences received by the FC-port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.20
fcIfNOSOut The number of non-operational sequences transmitted by the FC-port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.21
fcIfFragFrames The number of fragmented frames received by the FC-port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.22
fcIfEOFaFrames The number of frames received by FC-port with EOF aborts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.23
fcIfUnknownClassFrames The number of unknown class frames received by FC-port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.24
fcIf8b10bDisparityErrors The number of 8b10b disparity errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.25
fcIfFramesDiscard The number of frames discarded by the FC-port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.26
fcIfELPFailures The number of Exchange Link Parameters Switch Fabric Internal Link service request failures detected by the FC-Port. This object is applicable to only Interconnect_Port, which are E_Port or B_Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.27
fcIfBBCreditTransistionFromZero fcIfBBCreditTransistionFromZero increments if the transmit b2b credit is zero	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.28
fcIfEISLFramesDiscard The number of Enhanced Inter Switch Link (EISL) frames discarded by the FC-port. EISL frames carry an EISL header containing VSAN among other information.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.29
fcIfFramingErrorFrames The number of framing errors. This denotes that the FC-port detected an inconsistency of frame structure.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.30
fcIfLipF8In The number of 'F8' (LIP(F8,x)) type of Loop failures - Loop Initialization Primitive Sequence (LIP) errors received by the FC-Port from the attached FC-port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.31
fcIfLipF8Out The number of 'F8' (LIP(F8,x)) type of Loop failures - Loop Initialization Primitive Sequence (LIP) errors issued by the FC-Port to the attached FC-Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.32
fcIfNonLipF8In The number of Non 'F8' (LIP(F8,x)) type of Loop failures - Loop Initialization Primitive Sequence (LIP) errors received by the FC-Port from the attached FC-port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.33
fcIfNonLipF8Out The number of Non 'F8' (LIP(F8,x)) type of Loop failures - Loop Initialization Primitive Sequence (LIP) errors issued by the FC-Port to the attached FC-Port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.34
fcIfTimeOutDiscards The number of packets that are dropped due to time-out at the FC-port or due to the FC-port going offline.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.289.1.2.1.1.35
fcIfOutDiscards The total number of packets that are discarded in the egress side of the FC-port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.289.1.2.1.1.36
fcIfCreditLoss The number of link reset has occurred due to unavailable credits from the peer side of the link.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.289.1.2.1.1.37
fcIfTxWtAvgBBCreditTransitionToZero fcIfTxWtAvgBBCreditTransitionToZero increments if the credit available is zero for 100 ms.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.289.1.2.1.1.38
fcIfBBCreditTransistionToZero fcIfBBCreditTransistionToZero increments if the receive b2b credit is zero	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.289.1.2.1.1.39
fcHCIfBBCreditTransistionFromZero fcHCIfBBCreditTransistionFromZero increments if the transmit b2b credit is zero.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.289.1.2.1.1.40
fcHCIfBBCreditTransistionToZero fcHCIfBBCreditTransistionToZero increments if the receive b2b credit is zero.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.289.1.2.1.1.41
fcIfFECCorrectedBlks The number of blocks corrected by FEC decoder.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.289.1.2.1.1.42
fcIfFECUncorrectedBlks The number of blocks FEC decoder was unable to correct.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.289.1.2.1.1.43
fcIfSlowPortCount This object indicates number of times slowport event(transmit credits not available) condition detected for the timeout value configured in fcIffPortSlowportMonitorTimeout (for mode F) or fcIfePortSlowportMonitorTime…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.289.1.2.1.1.44
fcIfSlowPortOperDelay This object indicates the maximum operational credit delay experienced by the port at any given time. This object is an absolute value and resets to zero when the slowport condition disappears.	CISCO-TCCiscoMilliSeconds	.1.3.6.1.4.1.9.9.289.1.2.1.1.45
fcIfStateChangeCount This object indicates the number of times that port had been changed its state from down to up.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.289.1.2.1.1.46
fcHCIfTxWaitCount The number of times the FC-port waited due to lack of transmit credits. This object is a 64-bit version of fcIfTxWaitCount.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.289.1.2.1.1.47