CISCO-FC-FE-MIB

Represents the buffer-to-buffer credit of an
NxPort or FC-Port.

Represents the Buffer-to-Buffer Credit model of
an FC-Port.
regular(1) - Credit model is regular
alternate(2) - Credit model is alternate.

The cause of current operational state of the
port.

GLOSSARY:

BB - Buffer-to-Buffer.

BB_Credit - Buffer-to-Buffer credit, a link level flow
control mechanism.

B_Port - A Fibre Channel, Bridging port.

BPDU - Bridge Protocol Data Unit.

CDP - Cisco Discovery Protocol.

Class F - A connectionless service with notification on
non-delivery between E_Ports, used for control,
coordination, and configuration of the Fabric.

Class N - Refers to any class of service (different types
of frame delivery services) other than Class F.

E_D_TOV - Error Detect Timeout Value.

ENM - Egress Non-Multicast.

ELP - Exchange Link Parameter.

E-mode - A fibre channel port providing E_Port
functionality.

E_Port - A Fabric Expansion Port.

EPP - Exchange Peer Parameters.

ESC - Exchange Switch Capabilities.

Fabric - The set of physically connected fibre channel
switches.

FEX - Fabric EXtender.

FC-FS - Fibre Channel Framing and Signaling.

FCIP - Fibre Channel over IP protocol.

FCID - Fibre Channel Domain ID.

FCOE - Fibre Channel Over Ethernet.

FCOT - Fibre channel optical transmitter.

FC-PH - The Fibre Channel Physical and Signaling
standard.

FCSP - Fibre Channel Security Protocol.

Fibre Channel - The primary protocol for building SANs.

FICON - An I\O protocol used between IBM (and compatible)
mainframes and storage.

FLOGI - Fabric Login, used by a node port to establish a
session with the fabric.

GBIC - Gigabit Interface Converter; a removable
transceiver module permitting Fibre Channel and
Gigabit Ethernet physical-layer transport.

Interconnect_Ports - Switch Ports that assume either the
E_Port or B_Port mode are generally referred to
as Interconnect_Ports.

LACP - Link Access Control Protocol.

LIP - Loop Initialization Primitive sequence.

LR - Link Reset, the FC-PH defined primitive sequence
used to initiate a link reset.

MTU - Maximun transmission unit.

NOS - Not Operational Sequence, the FC-PH defined
primitive sequence to indicate that the
transmitting port has detected a link failure (or)
offline condition.

VIC - Virtual Interface Card.

VPC - Virtual Port Channel.

NPIV - N Port Identifier Virtualization.

NPV - NPort Virtualizer.

Nx_Port - A Fiber Channel Node Port.

OLS - Offline Sequence, the FC-PH defined primitive
sequence to indicate that the port is entering
into offline state.

OHMS - Online Health Management System.

PMON - Port Monitor.

R_A_TOV - Resource Allocation Timeout Value.

RCF - Reconfigure Fabric.

Rxbbcredit - Receive BB credit value configured for
a FC interface.

SAN - Storage Area Network; a network linking computing
devices to disk or tape arrays and other devices
over Fibre Channel.

SIF - Service Information Field.

SDM - Security Device Manager.

SDP - Secure Device Provisioning.

SFP - Small Formfactor Pluggable.

TE_Port - Trunking E_Port.

TOV - Time out value.

UDLD - Uni Directional Link Detection.

VDC - Virtual Device Context.

VEM - Virtual Ethernet Module.

VFC - Virtual Fibre Channel.

VRF - VPN Routing and Forwarding.

VSAN - Virtual Storage Area Network.

WWN - World Wide Name.

xE_Port - A Fiber channel port that can assume either
E_Port or TE_Port mode.

The enumerated values which provides the cause of the current
operational state of the interface are:

'other(1)' - reasons other than defined here.
'none(2)' - no failure
'hwFailure(3)' - hardware failure.
'loopbackDiagFailure(4)' - loopback diagnostics
failure.
'errorDisabled(5)' - the port is not operational
due to some error conditions that require
administrative attention.
'swFailure(6)' - software failure.
'linkFailure(7)' - physical link failure.
'offline(8)' - physical link is in offline state
as defined in the FC-FS standards.
'nonParticipating(9)' - during loop initialization,
the port is not allowed to participate in loop
operations.
'initializing(10)' - port is being initialized.
'vsanInactive(11)'- port VSAN is inactive. The port
becomes operational again when the port VSAN is
active.
'adminDown(12)' - 'ifAdminStatus' is down(2).
'channelAdminDown(13)' - this port is a member of
a port channel and that port channel's
ifAdminStatus is 'down(2)'.
'channelOperSuspended(14)' - this port is a member
of a port channel and its operational
parameters are incompatible with the port
channel parameters.
'channelConfigurationInProgress(15)' - this port
is undergoing a port channel configuration.
'rcfInProgress(16)' - an isolated xE_port is
transmiting an reconfigure fabric, requesting
a disruptive reconfiguration in an attempt to
build a single, non-isolated fabric.
Only the Interconnect_Ports can become isolated.
'elpFailureIsolation(17)' - during a port
initialization the prospective
Interconnect_Ports find incompatible link
parameters.
'escFailureIsolation(18) - during a port
initialization the prospective
Interconnect_Ports are unable to proceed with
initialization as a result of Exchange Switch
Capabilities (ESC).
'domainOverlapIsolation(19)' - there is a overlap
in domains while attempting to connect two
existing fabrics.
'domainAddrAssignFailureIsolation(20)' - the
elected principal switch is not capable of
performing domain address manager functions so
no Nx_port traffic can be forwarded across
switches, hence all Interconnect_Ports in the
switch are isolated.
'domainOtherSideEportIsolation(21)' - the peer
e-port is isolated.
'domainInvalidRCFReceived(22)' - Invalid rcf
received.
'domainManagerDisabled(23) - domain manager is
disabled.
'zoneMergeFailureIsolation(24)' - the two
Interconnect_Ports cannot merge zoning
configuration after having exchanged merging
request for zoning.
'vsanMismatchIsolation(25)' - this vsan is not
configured on both sides of a trunk port.
'parentDown(26)' - the physical port to which this
interface is bound is down.
'srcPortNotBound(27)'- no source port is specified
for this interface.
'interfaceRemoved(28)' - interface is being
removed.
'fcotNotPresent(29)' - fcot(GBIC) not present.
'fcotVendorNotSupported(30)' - fcot(GBIC) vendor
is not supported.
'incompatibleAdminMode(31)' - port admin mode is
incompatible with port capabilities.
'incompatibleAdminSpeed(32)' - port speed is
incompatible with port capabilities.
'suspendedByMode(33)' - port that belongs to a
port channel is suspended due to incompatible
operational mode.
'suspendedBySpeed(34)' - port that belongs to a
port channel is suspended due to incompatible
operational speed.
'suspendedByWWN(35)' - port that belongs to a
port channel is suspended due to incompatible
remote switch WWN.
'domainMaxReTxFailure(36)' - domain manager
failure after maximum retries.
'eppFailure(37)' - trunk negotiation protocol
failure after maximum retries.
'portVsanMismatchIsolation(38)' - an attempt is
made to connect two switches using
non-trunking ports having different port
VSANs.
'loopbackIsolation(39)' - port is connected to
another port in the same switch.
'upgradeInProgress(40)' - linecard upgrade in
progress.
'incompatibleAdminRxBBCredit(41)' - receive
BB credit is incompatible.
'incompatibleAdminRxBufferSize(42)' - receive
buffer size is incompatible.
'portChannelMembersDown(43)' - no operational
members.
'zoneRemoteNoRespIsolation(44)' - isolation
due to remote zone server not responding.
'firstPortUpAsEport(45)' - in a over subscribed
line card, when the first port in a group
is up in E mode, other ports in that group
cannot be brought up.
'firstPortNotUp(46)' - in a over subscribed
line card, first port cannot be brought up
in E-mode when the other ports in the group
are up.
'peerFCIPPortClosedConnection(47)' - port went
down because peer FCIP port closed TCP
connection.
'peerFCIPPortResetConnection(48)' - port went
down because the TCP connection was reset
by the peer fcip port.
'fcipPortMaxReTx(49)' - fcip port went down due
to max tcp re-transmissions reached the
configured limit.
'fcipPortKeepAliveTimerExpire(50)' - fcip port
went down due to TCP keep alive timer expired.
'fcipPortPersistTimerExpire(51)' - fcip port went
down due to TCP persist timer expired.
'fcipPortSrcLinkDown(52)' - fcip port went down
due to ethernet link down.
'fcipPortSrcAdminDown(53)' - fcip port went down
because the source ethernet link was
administratively shutdown.
'fcipPortAdminCfgChange(54)' - fcip port went down
due to configuration change.
'fcipSrcPortRemoved(55)' - fcip port went down due
to source port removal.
'fcipSrcModuleNotOnline(56)' - fcip port went down
due to source module not online.
'invalidConfig(57)' - this port has a
misconfiguration with respect to port channels.
'portBindFailure(58)' - port got isolated due to
port bind failure.
'portFabricBindFailure(59)' - port got isolated
due to fabric bind failure.
'noCommonVsanIsolation(60)' - trunk is isolated
because there are no common vsans with peer.
'ficonVsanDown' - Ficon vsan down
'invalidAttachment' - Invalid attachment
'portBlocked' - Port blocked due to Ficon
'incomAdminRxBBCreditPerBuf' - disabled due
to incompatible admin port rxbbcredit,
performance buffers.
'tooManyInvalidFLOGIs' - Suspended due to too
many invalid flogis.
'deniedDueToPortBinding' - Suspended due to
port binding.
'elpFailureRevMismatch' - Isolated for ELP failure
due to revision mismatch.
'elpFailureClassFParamErr' - Isolated for ELP
failure due to class F param error.
'elpFailureClassNParamErr' - Isolated for ELP
failure due to class N param error.
'elpFailureUnknownFlowCTLCode' - Isolated for ELP
failure due to invalid flow control code
'elpFailureInvalidFlowCTLParam' - Isolated for ELP
failure due to invalid flow control param.
'elpFailureInvalidPortName' - Isolated for ELP
failure due to invalid port name.
'elpFailureInvalidSwitchName' - Isolated for ELP
failure due to invalid switch name.
'elpFailureRatovEdtovMismatch' - Isolated for ELP
failure due to R_A_TOV or E_D_TOV mismatch.
'elpFailureLoopbackDetected' - Isolated for ELP
failure due to loopback detected.
'elpFailureInvalidTxBBCredit' - Isolated for ELP
failure due to invalid transmit B2B credit.
'elpFailureInvalidPayloadSize' - Isolated for ELP
failure due to invalid payload size.
'bundleMisCfg' - misconfiguration in portchannel
membership detected.
'bitErrRTThresExceeded' - bit error rate too high.
'linkFailLinkReset' - link failure due to link
reset.
'linkFailPortInitFail' - link failure due to
port initialization failure.
'linkFailPortUnusable' - link failure due to
port unusable.
'linkFailLossOfSignal' - link failure due to
loss of signal.
'linkFailLossOfSync' - link failure due to
loss of sync.
'linkFailNOSRcvd' - link failure due to
non-operational sequences received.
'linkFailOLSRcvd' - link failure due to offline
sequences received.
'linkFailDebounceTimeout' - link failure due to
re-negotiation failed.
'linkFailLRRcvdB2B' - link failure when
link reset(LR) operation fails due to
non-empty receive queue.
'linkFailCreditLoss' - link failure due to
excessive credit loss indications.
'linkFailRxQOverFlow' - link failure due to
receive queue overflow.
'linkFailTooManyINTR' - link failure due to
excessive port interrupts.
'linkFailLIPRcvdB2B' - link failure when
loop initialization(LIP) operation fails due
to non empty receive queue.
'linkFailCreditLossB2B' - link failure when
link reset(LR) operation fails due to
queue not empty.
'linkFailOPNyTMOB2B' - link failure due to
open primitive signal timeout while receive
queue not empty.
'linkFailOPNyRETB2B' - link failure due to
open primitive signal returned while receive
queue not empty.
'linkFailLIPF8Rcvd' - link failure due to F8 LIP
received.
'linkFailLineCardPortShutdown' - link failure due
to port shutdown.
'fcspAuthenfailure' - fibre channel security
protocol authorization fail.
'fcotChksumErr' - FCOT SPROM checksum error.
'ohmsExtLBTest' - link suspended due to external
loopback diagnostics failure.
'invalidFabricBindExh' - invalid fabric binding
exchange.
'tovMismatch' - link isolation due to TOV
mismatch.
'ficonNotEnabled - Ficon not enabled.
'ficonNoPortnumber' - no Ficon portnumber.
'ficonBeingEnabled' - Ficon is being enabled.
'ePortProhibited' - port down because FICON
prohibit mask in place for E/TE port.
'portGracefulShutdown' - port has been shutdown
gracefully.
'trunkNotFullyActive' - some of the VSANs which
are common with the peer are not up.
'fabricBindingSWWNNotFound' - Peer switch WWN
not found in fabric binding active database.
'fabricBindingDomainInvalid' - Peer domain ID
is invalid in fabric binding active
database.
'fabricBindingDBMismatch' - fabric binding
active database mismatch with peer.
'fabricBindingNoRspFromPeer' - fabric binding
no response from peer.
'vsanSuspended' - dynamic VSAN is suspended.
'vsanNotFound' - dynamic VSAN not found.
'trackedPortDown' - tracked port is down.
'ecSuspendedLoop' - EC is currently suspended
for loopback.
'isolatedBundle' - isolated bundle due to
misconfigurations.
'peerNotSupportBundle' - peer deivice does not
support port channel.
'portBringupIsolation' - trunk port
isolated during bringup time.
'domainNotAllowedIsolated' - port isolated
due to domain not allowed.
'virtualIvrDomainOverlapIsolation' - port
isolated due to virtual IVR domain overlap.
'outOfService' - port is in out of service
state.
'portAuthFailed' - port has encountered
an 802.1x authentication failure.
'bundleStandby' - port cannot be brought
up in a bundle, since the bundle has maximum
members.
'portConnectorTypeErr' - Error in the
port connector type (SFP).
'errorDisabledReInitLimitReached' - the port
is not operational after trying to
initialize the port multiple times due
to some errors.
'ficonDupPortNum' - the FICON VSAN has a
duplicate port number.
'localRcf' - local disruptive reconfiguration
(the local domain became invalid; no RCF
frames have been sent outside the local
switch).
'twoSwitchesWithSameWWN' - merge attempt between
VSANs containing the same WWN. If the user
attempts to merge two different VSANs and
both have at least one switch with the same
WWN then the link in between the VSANs is
isolated.
'invalidOtherSidePrincEFPReqRecd' - EFP request
frame indicating a principal switch other
than the locally known one.
'domainOther' - other domain manager reasons
not defined here.
'elpFailureAllZeroPeerWWNRcvd' - isolated for
ELP failure due to peer WWN is received
with all zeros.
'preferredPathIsolation' - port isolated due to
preferred path not able to program the routes.
'fcRedirectIsolation' - port isolated due to
FC Redirect not being able to program routes.
'portActLicenseNotAvailable' - port not brought up
due to lack of port activation licenses.
'sdmIsolation' - port isolated due to SDM not being
able to program routes.
'fcidAllocationFailed' - port down due to failure
in FCID allocation.
'externallyDisabled' - port externally disabled.
'unavailableNPVUpstreamPort' - NPV upstream port
not available.
'unavailableNPVPrefUpstreamPort' - NPV preferred
upstream port not available.
'sfpReadError' - the port is not operational due to
SFP read error.
'stickyDownOnLinkFailure' - the port is not operational
due to link failure in the sticky down mode.
'tooManyLinkFlapsErr' - too many link flaps on the port
in a short interval.
'unidirectionalUDLD' - unidirectional UDLD detected.
'txRxLoopUDLD' - UDLD Tx Rx loop.
'neighborMismatchUDLD' - UDLD neighbor mismatch.
'authzPending' - authorization pending.
'hotStdbyInBundle' - hot standby in bundle.
'incompleteConfig' - all parameters on the port have not been
configured.
'incompleteTunnelCfg' - incomplete tunnel config.
'hwProgrammingFailed' - hardware programming failed.
'tunnelDstUnreachable' - no route to tunnel destination
address.
'suspendByMtu' - MTU allocation failed.
'sfpInvalid' - SFP is not Cisco certified.
'sfpAbsent' - SFP is absent.
'portCapabilitiesUnknown' - the capabilities of the port are
unknown.
'channelErrDisabled' - the port-channel to which the port
belongs is in error disabled state.
'vrfMismatch' - Mismatch in source and transport VRF.
'vrfForwardReferencing' - Forward referencing transport VRF.
'dupTunnelConfigDetected' - two tunnel interfaces with same
configuration is not allowed.
'primaryVLANDown' - primary VLAN is in down state.
'vrfUnusable' - VRF is unusable.
'errDisableHandShkFailure' - port is not operational due to
an internal handshake failure.
'errDisabledBPDUGuard' - BPDUGuard triggered error disable on
the port.
'dot1xSecViolationErrDisabled' - error disabled due to dot1x
security violation.
'emptyEchoUDLD' - UDLD empty echo.
'vfTaggingCapErr' - VF Tagging capability mismatch error.
'portDisabled' - Port disabled.
'tunnelModeNotConfigured' - Tunnel Mode is not configured.
'tunnelSrcNotConfigured' - Tunnel Source is not configured.
'tunnelDstNotConfigured' - Tunnel Destination is not
configured.
'tunnelUnableToResolveSrcIP' - Unable to resolve tunnel
source IP address.
'tunnelUnableToResolveDstIP' - Unable to resolve tunnel
destination IP address.
'tunnelVrfDown' - Tunnel VRF down.
'sifAdminDown' - SIF is admin down.
'phyIntfDown' - Physical interface is down.
'ifSifLimitExceeded' - Interface SIF limit is exceeded.
'sifHoldDown' - SIF hold down.
'noFcoe' - No FCOE configuration.
'dcxCompatMismatch' - DCX Compatibility Mismatch.
'isolateBundleLimitExceeded' - Isolation due to bundle
limit exceeded.
'sifNotBound' - SIF is not bound.
'errDisabledLacpMiscfg' - Error Disabled due to LACP
misconfig.
'satFabricIfDown' - Satellite fabric interface down.
'invalidSatFabricIf' - Invalid satellite fabric interface.
'noRemoteChassis' - No remote chassis.
'vicEnableNotReceived' - VIC enable not received.
'vicDisableReceived' - VIC disable received.
'vlanVsanMappingNotEnabled' - VLAN VSAN mapping not enabled.
'stpNotFwdingInFcoeMappedVlan' - STP not forwarding in FCOE
Mapped Vlan.
'moduleOffline' - Module Offline.
'udldAggModeLinkFailure' - UDLD aggresive mode link failure.
'stpInconsVpcPeerDisabled' - STP inconsistent VPC peer
disabled.
'setPortStateFailed' - Set port state failed.
'suspendedByVpc' - Suspended by VPC.
'vpcCfgInProgress' - VPC configuration in progress.
'vpcPeerLinkDown' - VPC peer link down.
'vpcNoRspFromPeer' - VPC no response from peer.
'protoPortSuspend' - Proto port suspend.
'tunnelSrcDown' - Tunnel source down.
'cdpInfoUnavailable' - CDP information unavailable.
'fexSfpInvalid' - FEX SFP invalid.
'errDisabledIpConflict' - Error Disabled due to IP conflict.
'fcotClkRateMismatch' - FCOT CLK rate mismatch.
'portGuardTrustSecViolation' - Error disabled due to port guard
(Cisco Trusted Security Violation).
'sdpTimeout' - SDP timeout.
'satIncompatTopo' - Satellite incompatible topology.
'waitForFlogi' - Wait for FLOGI.
'satNotConfigured' - Satellite not configured.
'npivNotEnabledInUpstream' - NPIV not enabled in upstream.
'vsanMismatchWithUpstreamSwPort' - VSAN mismatch with upstream
switch port.
'portGuardBitErrRate' - Error disabled due to port guard
(Bit Error Rate).
'portGuardSigLoss' - Error disabled due to port guard
(Signal Loss).
'portGuardSyncLoss' - Error disabled due to port guard
(Sync Loss).
'portGuardLinkReset' - Error disabled due to port guard
(Link Reset).
'portGuardCreditLoss' - Error disabled due to port guard
(Credit Loss).
'ipQosMgrPolicyAppFailure' - IP QOS Manager policy
application failure.
'pauseRateLimitErrDisabled' - Port error disabled due
to pause rate limit condition.
'lstGrpUplinkDown' - EthPM LSTGRP downstream link down
due to upstream link down.
'stickyDnLinkFailure' - Port kept in error disabled
state due to Link Failure.
'routerMacFailure' - Router MAC failure.
'dcxMultipleMsapIds' - Port error disabled due to
multiple MSAP IDs (DCX).
'dcxHundredPdusRcvdNoAck' - Hundred PDUs received without
ACK (DCX).
'enmSatIncompatibleUplink' - Satellite Incompatible Uplink.
'enmLoopDetected' - Loop Detected (ENM).
'nonStickyExternallyDisabled' - Disabled by VPD Manager with
SHut/No Shut allowed.
'subGroupIdNotAssigned' - Sub-group ID not assigned.
'vemUnlicensed' - VEM Unlicensed.
'profileNotFound' - Profile not found.
'nonExistentVlan' - VLAN does not exist.
'vlanInvalidType' - Invalid VLAN type.
'vlanDown' - VLAN down.
'vpcPeerUpgrade' - VPC Peer Upgrade.
'ipQosDcbxpCompatFailure' - IPQOS DCBXP compatibility
failure.
'nonCiscoHbaVfTag' - Error Disabled due to Non-Cisco HBA
VF Tag.
'domainIdConfigMismatch' - Domain ID config mismatch.
'sfpSpeedMismatch' - SFP speed mismatch.
'xcvrInitializing' - Transceiver initializing.
'xcvrAbsent' - Transceiver absent.
'xcvrInvalid' - Transceiver invalid.
'vfcBindingInvalid' - Invalid VFC Binding.
'vlanNotFcoeEnabled' - VLAN down due to FCOE disabled.
'pvlanNativeVlanErr' - Private VLAN - Native VLAN error.
'ethL2VlanDown' - Ethernet L2 VLAN down.
'ethIntfInvalidBinding' - Invalid Binding to Ethernet
Interface.
'pmonFailure' - PMON Failure.
'l3NotReady' - L3 not ready.
'speedMismatch' - Speed Mismatch.
'flowControlMismatch' - Flow Control Mismatch.
'vdcMode' - VDC mode
'suspendedDueToMinLinks' - Suspended due to Min Links.
'enmPinFailLinkDown' - ENM Pin Fail Link Down.
'inactiveM1PortFpathActiveVlan' - Inactive M1 Port
F Path Active VLAN.
'parentPortDown' - Parent Port Down.
'moduleRemoved' - Module Removed.
'corePortMct' - Core Port MCT.
'nonCorePortMct' - Non Core port MCT.
'ficonInorderNotActive'- FICON Inorder Not Active.
'invalidEncapsulation' - Invalid Encapsulation.
'modemLineDeasserted' - Modem line asserted.
'ipSecHndshkInProgress' - IP Sec Handshake in progress.
'sfpEthCompliantErr' - Sfp Ethernet compliant error.
'cellularModemUnattached' - Cellular Modem unattached.
'outOfGlblRxBuffers' - Out of global Rx buffers.
'sfpFcCompliantErr' - Sfp Fc Compliant Error.
'ethIntfNotLicensed' - Ethernet interface not licensed.
'domainIdsInvalid' - Domain IDs Invalid.
'fabricNameInvalid' - Fabric Name Invalid.
'ficonNoPortSwapLogicalPort' - Ficon No Port Swap Logical Port.
'ficonInvalidPortNum ' - Ficon Invalid Port Number.
'remotePortInL2vpnDown' - Remote Port in L2VPN Down.
'suspendedDueToNoLacpPdus' - Suspended due to no LACP PDUs.
'fcotValidationFailedAtDriver' - Fcot validation failed at driver.
'unsupportedTransceiverMd5DigestNotSame' - Unsupported transceiver MD5 digest not Same.
'unsupportedTransceiver' - Unsupport transceiver.
'adminStateConfigChange' - Admin state config change.
'vlanAllowedList' - Allowed Vlan list configured on the port.
'vlanAllowedListOverride' - Allowed Vlan list changed on the port.
'vlanAllowedListAdd' - Vlan has been added to the allowed Vlan list on the port.
'vlanAllowedListRemove' - Vlan has been removed from the allowed Vlan list on the port.
'vlanCfgStateChange' - Port affected due to Vlan state change.
'vlanCfgDelete' - Port affected due to Vlan delete.
'pppPeerNotResponding' - ppp peer not responding.
'pppAuthFailed' - ppp authentication failed.
'xcvrAuthFailed' - Transceiver authentication failed.
'badFramesRcvdFromLink' - Excessive bad frames received from link.
'phyPortHotStandby' - Physical port in hot standby mode.
'wimaxModemUnattached' - WiMAX modem unattached.
'wpanModemUnattached' - WPAN modem unattached.
'rbhModulo' - RBH modulo.
'suspendedFpcMinlinksNotMet' - Suspended FPC min-links not met.
'miscabling' - Miscabling detected.
'rcvSrpOnNonFcoeFex' - Received SRP on non-FCOE FEX.
'inactivePortAccessVlanOnBd' - Inactive port access VLAN on BD.
'suspendedDueToLacpMisConfig' - Suspended due to LACP misconfiguration.
'establishBfd' - Establish BFD.
'fortyGMemberPort' - 40G member port (obsolete).
'goldLbTest' - GOLD loopback test.
'edpError' - EDP error.
'vpcCompatFailed' - VPC compatibility failed.
'aclqosNoResource' - ACLQOS no resource.
'vpcShutdown' - VPC shutdown.
'notPcMember' - Not a port-channel member.
'systemIntfShut' - System interface shut.
'speedGroupCfgReq' - Speed group configuration required.
'systemIntfShutdown' - System interface shutdown.
'dot1qMisconfig' - Dot1q misconfiguration.
'mdMismatch' - MD mismatch.
'suspendedByVpcForPlShut' - Suspended by VPC for peer-link shutdown.
'portNotAvailable' - Port not available.
'eloSessionDown' - ELO session down.
'eloDiscoveryTimeout' - ELO discovery timeout.
'eloCapabilitiesConflict' - ELO capabilities conflict.
'eloMiswired' - ELO miswired.
'eloLinkFault' - ELO link fault.
'eloDyingGasp' - ELO dying gasp.
'eloCriticalEvent' - ELO critical event.
'eloThresholdBreached' - ELO threshold breached.
'hwResourceExhaustion' - Hardware resource exhaustion.
'hifPcinfoMismatch' - HIF PC info mismatch.
'lanDown' - LAN down.
'pmonFlap' - PMON flap.
'pmonErrDisable' - PMON error disable.
'nveCoreLinkDown' - NVE core link down.
'dportMisconfig' - D-port misconfiguration.
'mvrCfg' - MVR configuration.
'qsaPresent' - QSA present.
'pairPortSfpSpeedMismatch' - Pair port SFP speed mismatch.
'xcvrBreakoutUnsupported' - Transceiver breakout unsupported.
'fecSpeedIncompatible' - FEC speed incompatible.
'notAvailable' - Not available.
'xconnectDown' - xconnect down.
'aafexFabricDown' - AA FEX fabric down.
'fipsFailure' - FIPS failure.
'xcvrBreakoutMapUnsupported' - Transceiver breakout map unsupported.
'eightGArbffFillPatternRcvd' - 8G ARBFF fill pattern received.
'mediaTypeUnsupported' - Media type unsupported.
'breakinMemberPort' - Break-in member port.
'macMacsecConflict' - MAC MACsec conflict.
'quadSpeedMismatch' - Quad speed mismatch.
'fecTtsNotConfigured' - FEC TTS not configured.
'duplicateSfp' - Duplicate SFP.
'errdisableChasisMismatch' - Error disable chassis mismatch.
'mmodeBootEnabled' - Maintenance mode boot enabled.
'serdesCoreFailureErrDisable' - SERDES core failure error disable.
'fspfCostMultiplierMismatch' - FSPF cost multiplier mismatch.
'hwDisabled' - Hardware disabled.
'unsupportedPlatformL3po' - Unsupported platform L3 port.
'poeErrorDisabled' - PoE error disabled.
'stormctrlErrDisabled' - Storm control error disabled.
'qsaAdaptor' - QSA adaptor.
'aggrPortFlapsErrDisabled' - Aggressive port flaps error disabled.
'hwDisabledSpeedMismatchPortGrp' - Hardware disabled speed mismatch in port group.
'mplsPlatformNotSupported' - MPLS platform not supported.
'mediaTypeErrDisabled' - Media type error disabled.
'hwDisabledByBkout' - Hardware disabled by breakout.
'hpoMaxLimitReached' - HPO max limit reached.
'insertedHpoIncompatibleWithMacsecSessions' - Inserted HPO incompatible with MACsec sessions.
'epmLearnDisabled' - EPM learn disabled.
'mcpLoopErrdisable' - MCP loop error disable.
'fabricTrack' - Fabric track.
'diagErrorDisabled' - Diagnostic error disabled.
'incompatibleFecmode' - Incompatible FEC mode.
'linkNotConnected' - Link not connected.
'fspfCostMultiplierMismatchErrdisable' - FSPF cost multiplier mismatch error disable.
'transceiverIncompatible' - Transceiver incompatible.
'hpoXcvrUnsupported' - HPO transceiver unsupported.
'xcvrHighTemperature' - Transceiver high temperature.
'fkaTimeout' - FKA timeout.
'unsupportedAutonegCfg' - Unsupported auto negotiation configuration.
'unsupportedPhymediatypeCfg' - Unsupported physical media type configuration.
'smaErrorDisable' - SMA error disable.
'smaFlapPort' - SMA flap port.
'olsInserted' - OLS inserted.
'noDlbResource' - No DLB resource.
'errdisableEsiUnsupported' - Error disable ESI unsupported.
'errorDisabledAclProgramFailure' - Error disabled ACL program failure.
'suspendedBySas' - Suspended by SAS.
'errorDisabledPortConfigFailure' - Error disabled port configuration failure.
'prbsTest' - PRBS test.

Represents the number of performance buffers of a
physical FC-port. These buffers in addition to the
buffer-to-buffer credits are used to improve the
performance of a port, hence called
'Performance buffers'. A value of zero for this
means the agent uses the built-in algorithm to
calculate the number of performance buffers to be
used.

Represents the receive data field size of an
NxPort or FC-Port.

Represents the version of FC-PH supported by an
NxPort or FC-Port.