CISCO-DYNAMIC-TEMPLATE-MIB Table View

This table lists the dynamic templates maintained by the
system, including those that have been locally-configured on the
system and those pushed to the system by external policy
servers.

cdtTemplateEntry row .1.3.6.1.4.1.9.9.784.1.1.1.1

An entry describes a dynamic template, which serves as a
container for configuration attributes. The configuration
attributes contained by a dynamic template depends on its type.

The system automatically c…

Indexes

cdtTemplateName

Column	Syntax	OID
cdtTemplateName This object indicates a string-value that uniquely identifies the dynamic template. If the corresponding instance of cdtTemplateSrc is not 'local', then the system automatically generates the name identif…	CISCO-DYNAMIC-TEMPLATE-TC-MIBDynamicTemplateName Type Constraints: range: 1..64	.1.3.6.1.4.1.9.9.784.1.1.1.1.1
cdtTemplateStatus This object specifies the status of the dynamic template. The following columns must be valid before activating a dynamic template: - cdtTemplateStorage - cdtTemplateType However, …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.784.1.1.1.1.2
cdtTemplateStorage This object specifies what happens to the dynamic template upon restart. If the corresponding instance of cdtTemplateSrc is not 'local', then this column must be 'volatile'.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.784.1.1.1.1.3
cdtTemplateType This object indicates the types of dynamic template.	CISCO-DYNAMIC-TEMPLATE-TC-MIBDynamicTemplateTyper/w Type Values: 1 other 2 derived 3 ppp 4 ethernet 5 ipSubscriber 6 service	.1.3.6.1.4.1.9.9.784.1.1.1.1.4
cdtTemplateSrc This object specifies the source of the dynamic template: 'other' The implementation of the MIB module does not recognize the source of the dynamic template. 'derived' The syste…	Enumeration Enumerated Values: 1 other 2 derived 3 local 4 aaaUserProfile 5 aaaServiceProfile	.1.3.6.1.4.1.9.9.784.1.1.1.1.5
cdtTemplateUsageCount This object specifies the number of targets using a dynamic template	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.784.1.1.1.1.6

This table contains a list of targets associated with
one or more dynamic templates.

cdtTemplateTargetEntry row .1.3.6.1.4.1.9.9.784.1.1.2.1

An entry describes a target associated with one or more
dynamic templates.

The system automatically creates an entry when it associates a
dynamic template to a target. Likewise, the system
automatically de…

Indexes

cdtTemplateTargetType cdtTemplateTargetId

Column	Syntax	OID
cdtTemplateTargetType This object indicates the type of target.	CISCO-DYNAMIC-TEMPLATE-TC-MIBDynamicTemplateTargetType Type Values: 1 other 2 interface	.1.3.6.1.4.1.9.9.784.1.1.2.1.1
cdtTemplateTargetId This object uniquely identifies the target within the scope of its type.	CISCO-DYNAMIC-TEMPLATE-TC-MIBDynamicTemplateTargetId Type Constraints: range: 1..20	.1.3.6.1.4.1.9.9.784.1.1.2.1.2
cdtTemplateTargetStatus This object specifies the status of the dynamic template target. The following columns must be valid before activating a subscriber access profile: - cdtTemplateTargetStorage However, …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.784.1.1.2.1.3
cdtTemplateTargetStorage This object specifies what happens to the dynamic template target upon restart.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.784.1.1.2.1.4

This table contains a list of templates associated with each
target.
          
This table has an expansion dependent relationship on the
cdtTemplateTargetTable, containing zero or more rows for each
target.

cdtTemplateAssociationEntry row .1.3.6.1.4.1.9.9.784.1.1.3.1

An entry indicates an association of a dynamic template with a
target.

The system automatically creates an entry when it associates a
dynamic template to a target.

The system also creates an en…

Indexes

cdtTemplateTargetType cdtTemplateTargetId cdtTemplateAssociationName

Column	Syntax	OID
cdtTemplateAssociationName This object indicates the name of the template associated with the target.	CISCO-DYNAMIC-TEMPLATE-TC-MIBDynamicTemplateName Type Constraints: range: 1..64	.1.3.6.1.4.1.9.9.784.1.1.3.1.1
cdtTemplateAssociationPrecedence This object indicates the relative precedence of the associated dynamic template. Lower values have higher precedence than higher values.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.784.1.1.3.1.2

This table contains a list of targets using each dynamic
template.
          
This table has an expansion dependent relationship on the
cdtTemplateTable, containing zero or more rows for each
dynamic template.

cdtTemplateUsageEntry row .1.3.6.1.4.1.9.9.784.1.1.4.1

An entry indicates a target using the dynamic template.

The system automatically creates an entry when it associates a
dynamic template to a target.

The system also creates an entry when it der…

Indexes

cdtTemplateName cdtTemplateUsageTargetType cdtTemplateUsageTargetId

Column	Syntax	OID
cdtTemplateUsageTargetType This object indicates the type of target using the dynamic template.	CISCO-DYNAMIC-TEMPLATE-TC-MIBDynamicTemplateTargetType Type Values: 1 other 2 interface	.1.3.6.1.4.1.9.9.784.1.1.4.1.1
cdtTemplateUsageTargetId This object indicates the name of the target using the dynamic template	CISCO-DYNAMIC-TEMPLATE-TC-MIBDynamicTemplateTargetId Type Constraints: range: 1..20	.1.3.6.1.4.1.9.9.784.1.1.4.1.2

This table contains attributes relating to all dynamic
templates.  Observe that the type of dynamic templates
containing these attributes may change with the addition of new
dynamic template types.
          
This table has a sparse-dependent relationship on the
cdtTemplateTable, containing a row for each dynamic template
having a cdtTemplateType of one of the following values:
          
    'derived'
    'ppp'
    'ethernet'
    'ipSubscriber'
    'service'

cdtTemplateCommonEntry row .1.3.6.1.4.1.9.9.784.1.1.5.1

An entry containing attributes relating to any target.

The system automatically creates an entry when the system or the
EMS/NMS creates a row in the cdtTemplateTable with a
cdtTemplateType of on the followi…

Indexes

cdtTemplateName

Column	Syntax	OID
cdtCommonValid This object specifies which attributes in the dynamic template have been configured to valid values. Each bit in this bit string corresponds to a column in this table. If the bit is '0', then the value o…	Bitsr/w Enumerated Values: 0 descr 1 keepalive 2 vrf 3 addrPool 4 ipv4AccessGroup 5 ipv4Unreachables 6 ipv6AccessGroup 7 ipv6Unreachables 8 srvSubControl 9 srvRedirect 10 srvAcct 11 srvQos 12 srvNetflow	.1.3.6.1.4.1.9.9.784.1.1.5.1.1
cdtCommonDescr This object specifies a human-readable description for the dynamic template. This column is valid only if the 'descr' bit of the corresponding instance of cdtCommonValid is '1'.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.1.5.1.2
cdtCommonKeepaliveInt This object specifies the interval that the system sends keepalive messages to a target. This column is valid only if the 'keepaliveInterval' bit of the corresponding instance of cdtCommonValid is '1'.	secondsUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.784.1.1.5.1.3
cdtCommonKeepaliveRetries This object specifies the number of times the system will resend a keepalive message without a response before it transitions a target to an operationally down state. This column is valid only if the 'kee…	retriesUnsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.9.9.784.1.1.5.1.4
cdtCommonVrf This object specifies the name of the VRF with which a target has an association. This column is valid only if the 'vrf' bit of the corresponding instance of cdtCommonValid is '1'.	CISCO-TCCiscoVrfNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.784.1.1.5.1.5
cdtCommonAddrPool This object specifies the name of the IP address pool the system will use to assign an IP address to a peer of a target. This column is valid only if the 'addrPool' bit of the corresponding instance of cd…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.1.5.1.6
cdtCommonIpv4AccessGroup This object specifies the name (or number) of the IPv4 ACL applied to a target. This column is valid only if the 'ipv4AccessGroup' bit of the corresponding instance of cdtCommonValid is '1'.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.1.5.1.7
cdtCommonIpv4Unreachables This object specifies whether a target generates ICMPv4 unreachable messages. This column is valid only if the 'ipv4Unreachables' bit of the corresponding instance of cdtCommonValid is '1'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.784.1.1.5.1.8
cdtCommonIpv6AccessGroup This object specifies the name (or number) of the IPv4 ACL applied to a target. This column is valid only if the 'ipv6AccessGroup' bit of the corresponding instance of cdtCommonValid is '1'.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.1.5.1.9
cdtCommonIpv6Unreachables This object specifies whether a target generates ICMPv6 unreachable messages. This column is valid only if the 'ipv6Unreachables' bit of the corresponding instance of cdtCommonValid is '1'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.784.1.1.5.1.10
cdtCommonSrvSubControl This object specifies the name of the subscriber control policy applied to a target. The system should assume that the cbpPolicyMapType (defined by the CISCO-CBP-BASE-CFG-MIB) of the policy is cbpPmtContr…	CISCO-CBP-TC-MIBCbpElementNamer/w Type Constraints: range: 0..127	.1.3.6.1.4.1.9.9.784.1.1.5.1.11
cdtCommonSrvRedirect This object specifies the name of the traffic redirect policy applied to a target. The system should assume that the cbpPolicyMapType (defined by the CISCO-CBP-BASE-CFG-MIB) of the policy is cbpPmtTraffic…	CISCO-CBP-TC-MIBCbpElementNamer/w Type Constraints: range: 0..127	.1.3.6.1.4.1.9.9.784.1.1.5.1.12
cdtCommonSrvAcct This object specifies the name of the traffic accounting policy applied to a target. The system should assume that the cbpPolicyMapType (defined by the CISCO-CBP-BASE-CFG-MIB) of the policy is cbpPmtTraff…	CISCO-CBP-TC-MIBCbpElementNamer/w Type Constraints: range: 0..127	.1.3.6.1.4.1.9.9.784.1.1.5.1.13
cdtCommonSrvQos This object specifies the name of the traffic QoS policy applied to a target. The system should assume that the cbpPolicyMapType (defined by the CISCO-CBP-BASE-CFG-MIB) of the policy is cbpPmtQos (defined…	CISCO-CBP-TC-MIBCbpElementNamer/w Type Constraints: range: 0..127	.1.3.6.1.4.1.9.9.784.1.1.5.1.14
cdtCommonSrvNetflow This object specifies the name of the NetFlow policy applied to a target. The system should assume that the cbpPolicyMapType (defined by the CISCO-CBP-BASE-CFG-MIB) of the policy is cbpPmtNetflow (defined…	CISCO-CBP-TC-MIBCbpElementNamer/w Type Constraints: range: 0..127	.1.3.6.1.4.1.9.9.784.1.1.5.1.15

This table contains attributes relating to interface
configuration.
          
This table has a sparse-dependent relationship on the
cdtTemplateTable, containing a row for each dynamic template
having a cdtTemplateType of one of the following values:
          
    'derived'
    'ppp'
    'ethernet'
    'ipSubscriber'

cdtIfTemplateEntry row .1.3.6.1.4.1.9.9.784.1.2.1.1

An entry containing attributes relating to interface
configuration.

The system automatically creates an entry when the system or the
EMS/NMS creates a row in the cdtTemplateTable with a
cdtTemplateType of o…

Indexes

cdtTemplateName

Column	Syntax	OID
cdtIfValid This object specifies which attributes in the dynamic template have been configured to valid values. Each bit in this bit string corresponds to a column in this table. If the bit is '0', then the value o…	Bitsr/w Enumerated Values: 0 mtu 1 cdpEnable 2 flowMonitor 3 ipv4Unnumbered 4 ipv4SubEnable 5 ipv4Mtu 6 ipv4TcpMssAdjust 7 ipv4VerifyUniRpf 8 ipv4VerifyUniRpfAcl 9 ipv4VerifyUniRpfOpts 10 ipv6Enable 11 ipv6SubEnable 12 ipv6TcpMssAdjust 13 ipv6VerifyUniRpf 14 ipv6VerifyUniRpfAcl 15 ipv6VerifyUniRpfOpts 16 ipv6NdPrefix 17 ipv6NdValidLife 18 ipv6NdPreferredLife 19 ipv6NdOpts 20 ipv6NdDadAttempts 21 ipv6NdNsInterval 22 ipv6NdReachableTime 23 ipv6NdRaIntervalMax 24 ipv6NdRaIntervalMin 25 ipv6NdRaLife 26 ipv6NdRaRouterPreference	.1.3.6.1.4.1.9.9.784.1.2.1.1.1
cdtIfMtu This object specifies the Maximum Transfer Unit (MTU) size for all packets sent on the target interface. The value '0' cannot be written to an instance of this object. However, it serves as a convenient v…	octetsUnsigned32r/w Constraints: range: 0-0 range: 64-65535	.1.3.6.1.4.1.9.9.784.1.2.1.1.2
cdtIfCdpEnable This object specifies whether the target interface participates in the Cisco Discovery Protocol (CDP). This column is valid only if the 'cdpEnable' bit of the corresponding instance of cdtIfValid is '1'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.784.1.2.1.1.3
cdtIfFlowMonitor This object specifies the name of the flow monitor associated with the target interface. This column is valid only if the 'flowMonitor' bit of the corresponding instance of cdtIfValid is '1'.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.2.1.1.4
cdtIfIpv4Unnumbered This object specifies the interface of the source address that the target interface uses when originating IPv4 packets. The value '0' cannot be written to an instance of this object. However, it serves as…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.784.1.2.1.1.5
cdtIfIpv4SubEnable This object specifies whether the target interface allows IPv4 subscriber sessions. This column is valid only if the 'ipv4SubEnable' bit of the corresponding instance of cdtIfValid is '1'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.784.1.2.1.1.6
cdtIfIpv4Mtu This object specifies the Maximum Transfer Unit (MTU) size for IPv4 packets sent on the target interface. The value '0' cannot be written to an instance of this object. However, it serves as a convenient …	octetsUnsigned32r/w Constraints: range: 128-65535 range: 0-0	.1.3.6.1.4.1.9.9.784.1.2.1.1.7
cdtIfIpv4TcpMssAdjust This object specifies the adjustment to the Maximum Segment Size (MSS) of TCP SYN packets received by the target interface contained in IPv4 datagrams. The value '0' cannot be written to an instance of th…	octetsUnsigned32r/w Constraints: range: 0-0 range: 500-1460	.1.3.6.1.4.1.9.9.784.1.2.1.1.8
cdtIfIpv4VerifyUniRpf This object specifies whether the type of unicast RPF the system performs on IPv4 packets received by the target interface. This column is valid only if the 'ipv4VerifyUniRpf' bit of the corresponding ins…	CISCO-IP-URPF-MIBUnicastRpfTyper/w Type Values: 1 strict 2 loose 3 disabled	.1.3.6.1.4.1.9.9.784.1.2.1.1.9
cdtIfIpv4VerifyUniRpfAcl This object specifies the name (or number) of the IPv4 ACL used to determine whether the system should permit/deny packets received by the target interface that fail unicast RPF verification. This column …	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.2.1.1.10
cdtIfIpv4VerifyUniRpfOpts This object specifies the options that affect how the system performs unicast RPF on IPv4 packets received by the target interface. This column is valid only if the 'ipv4VerifyUniRpfOpts' bit of the corre…	CISCO-IP-URPF-MIBUnicastRpfOptionsr/w Type Values: 0 allowDefault 1 allowSelfPing	.1.3.6.1.4.1.9.9.784.1.2.1.1.11
cdtIfIpv6Enable This object specifies whether the system processes IPv6 packets received by the target interface. This column is valid only if the 'ipv6Enable' bit of the corresponding instance of cdtIfValid is '1'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.784.1.2.1.1.12
cdtIfIpv6SubEnable This object specifies whether the target interface allows IPv6 subscriber sessions. This column is valid only if the 'ipv6SubEnable' bit of the corresponding instance of cdtIfValid is '1'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.784.1.2.1.1.13
cdtIfIpv6TcpMssAdjust This object specifies the adjustment to the Maximum Segment Size (MSS) of TCP SYN packets received by the target interface contained in IPv6 datagrams. The value '0' cannot be written to an instance of th…	octetsUnsigned32r/w Constraints: range: 0-0 range: 500-1460	.1.3.6.1.4.1.9.9.784.1.2.1.1.14
cdtIfIpv6VerifyUniRpf This object specifies whether the type of unicast RPF the system performs on IPv6 packets received by the target interface. This column is valid only if the 'ipv6VerifyUniRpf' bit of the corresponding ins…	CISCO-IP-URPF-MIBUnicastRpfTyper/w Type Values: 1 strict 2 loose 3 disabled	.1.3.6.1.4.1.9.9.784.1.2.1.1.15
cdtIfIpv6VerifyUniRpfAcl This object specifies the name (or number) of the IPv6 ACL used to determine whether the system should permit/deny packets received by the target interface that fail unicast RPF verification. This column …	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.2.1.1.16
cdtIfIpv6VerifyUniRpfOpts This object specifies the options that affect how the system performs unicast RPF on IPv6 packets received by the target interface. This column is valid only if the 'ipv6VerifyUniRpfOpts' bit of the corre…	CISCO-IP-URPF-MIBUnicastRpfOptionsr/w Type Values: 0 allowDefault 1 allowSelfPing	.1.3.6.1.4.1.9.9.784.1.2.1.1.17
cdtIfIpv6NdPrefix This object specifies the IPv6 network number included in IPv6 router advertisements sent on the target interface. This column is valid only if the 'ipv6NdPrefix' bit of the corresponding instance of cdtI…	INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16	.1.3.6.1.4.1.9.9.784.1.2.1.1.18
cdtIfIpv6NdPrefixLength This object specifies the length of the IPv6 prefix specified by the corresponding instance of cdtIpv6NdPrefix. This column is valid only if the 'ipv6NdPrefix' bit of the corresponding instance of cdtIfVa…	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.9.9.784.1.2.1.1.19
cdtIfIpv6NdValidLife This object specifies the interval that the system advertises the IPv6 prefix (i.e., the corresponding instance of cdtIfIpv6NdPrefix) as 'valid' for IPv6 router advertisements sent on the target interface. …	secondsUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.784.1.2.1.1.20
cdtIfIpv6NdPreferredLife This object specifies the interval that the system advertises the IPv6 prefix (i.e., the corresponding instance of cdtIfIpv6NdPrefix) as 'preferred' for IPv6 router advertisements sent on the target interface. …	secondsUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.784.1.2.1.1.21
cdtIfIpv6NdOpts This object specifies options that affect advertisements sent on the target interface: 'advertise' This option specifies that the system should advertise the IPv6 prefix (i.e., the cor…	Bitsr/w Enumerated Values: 0 advertise 1 onlink 2 router 3 autoConfig 4 advertisementInterval 5 managedConfigFlag 6 otherConfigFlag 7 framedIpv6Prefix 8 raSuppress	.1.3.6.1.4.1.9.9.784.1.2.1.1.22
cdtIfIpv6NdDadAttempts This object specifies the number of consecutive neighbor solitication messages the system sends on the target interface while performing duplicate address detection on unicast IPv6 addresses on the target interface. Th…	Unsigned32r/w Constraints: range: 0-600	.1.3.6.1.4.1.9.9.784.1.2.1.1.23
cdtIfIpv6NdNsInterval This object specifies the interval between neighbor solicitation retransmissions on the target interface. This column is valid only if the 'ipv6NdNsIntervals' bit of the corresponding instance of cdtIfVal…	millisecondsUnsigned32r/w Constraints: range: 1000-3600000	.1.3.6.1.4.1.9.9.784.1.2.1.1.24
cdtIfIpv6NdReachableTime This object specifies the amount of time the system considers a neighbor of the target interface reachable after a reachability confirmation event has occurred. The value '0' disables neighbor reachability detection on…	millisecondsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.784.1.2.1.1.25
cdtIfIpv6NdRaIntervalUnits This object specifies the units of time for the corresponding instances of cdtIfIpv6NdRaIntervalMin and cdtIfIpv6NdRaIntervalMax. This column is valid only if the 'ipv6NdRaInterval' bit of the correspondi…	Enumerationr/w Enumerated Values: 1 seconds 2 milliseconds	.1.3.6.1.4.1.9.9.784.1.2.1.1.26
cdtIfIpv6NdRaIntervalMax This object specifies the maximum interval between IPv6 router advertisements sent on the target interface. The value '0' cannot be written to an instance of this object. However, it serves as a convenien…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.784.1.2.1.1.27
cdtIfIpv6NdRaIntervalMin This object specifies the minimum interval between IPv6 router advertisements sent on the target interface. The value of this column has the following restrictions: 1) This value cannot be less than 75%…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.784.1.2.1.1.28
cdtIfIpv6NdRaLife This object specifies the router lifetime value in IPv6 router advertisements sent on the target interface. The value '0' specifies that neighbors should not consider the router as a default router.	secondsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.784.1.2.1.1.29
cdtIfIpv6NdRouterPreference This object specifies the Default Router Preference (DRP) for the router on the target interface. This column is valid only if the 'ipv6NdRouterPreference' bit of the corresponding instance of cdtIfValid …	Enumerationr/w Enumerated Values: 1 high 2 medium 3 low	.1.3.6.1.4.1.9.9.784.1.2.1.1.30

This table contains attributes relating to PPP connection
configuration.
          
This table has a sparse-dependent relationship on the
cdtTemplateTable, containing a row for each dynamic template
having a cdtTemplateType of one of the following values:
          
    'derived'
    'ppp'

cdtPppTemplateEntry row .1.3.6.1.4.1.9.9.784.1.3.1.1

An entry containing attributes relating to PPP connection
configuration.

The system automatically creates an entry when the system or the
EMS/NMS creates a row in the cdtTemplateTable with a
cdtTemplateType…

Indexes

cdtTemplateName

Column	Syntax	OID
cdtPppValid This object specifies which attributes in the dynamic template have been configured to valid values. Each bit in this bit string corresponds to a column in this table. If the bit is '0', then the value o…	Bitsr/w Enumerated Values: 0 valid 1 accounting 2 authentication 3 autthenticationMethods 4 authorization 5 loopbackIgnore 6 maxBadAuth 7 maxConfigure 8 maxFailure 9 maxTerminate 10 timeoutAuthentication 11 timeoutRetry 12 chapOpts 13 chapHostname 14 chapPassword 15 msChapV1Opts 16 msChapV1Hostname 17 msChapV1Password 18 msChapV2Opts 19 msChapV2Hostname 20 msChapV2Password 21 papOpts 22 papUsername 23 papPassword 24 eapOpts 25 eapIdentity 26 eapPassword 27 ipcpAddrOption 28 ipcpDnsOption 29 ipcpDnsPrimary 30 ipcpDnsSecondary 31 ipcpWinsOption 32 ipcpWinsPrimary 33 ipcpWinsSecondary 34 ipcpMaskOption 35 ipcpMask 36 peerDefIpAddrOpts 37 peerDefIpAddrSrc 38 peerDefIpAddr	.1.3.6.1.4.1.9.9.784.1.3.1.1.1
cdtPppAccounting This object specifies whether the system applies accounting services to the target PPP connection. This column is valid only if the 'accounting' bit of the corresponding instance of cdtPppValid is '1'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.784.1.3.1.1.2
cdtPppAuthentication This object specifies authentication services applied to a target PPP connection and other options affecting authentication services: 'chap' This option enables the Challenge Handshake Protoco…	Bitsr/w Enumerated Values: 0 chap 1 msChap 2 msChapV2 3 pap 4 eap 5 optional 6 callin 7 oneTime	.1.3.6.1.4.1.9.9.784.1.3.1.1.3
cdtPppAuthenticationMethods This object specifies the name of a list of authentication methods used on a target PPP connection. If the template does not include this attribute, then the system uses the default method list. This col…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.3.1.1.4
cdtPppAuthorization This object specifies whether the system applies authorization services to a target PPP connection. This column is valid only if the 'authorization' bit of the corresponding instance of cditPppValid is '1…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.784.1.3.1.1.5
cdtPppLoopbackIgnore This object specifies whether the system ignores loopback on a target PPP connection. When the system ignores loopback, loopback detection is disabled. This column is valid only if the 'loopbackIgnore' b…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.784.1.3.1.1.6
cdtPppMaxBadAuth This object specifies the number of authentication failures allowed by the system before a target PPP connection is reset. The value '0' cannot be written to an instance of this object. However, it serves…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.784.1.3.1.1.7
cdtPppMaxConfigure This object specifies the number of unacknowledged Configure-Request messages a target PPP connection can send before the system abandons LCP or NCP negotiations. This column is valid only if the 'maxConf…	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.784.1.3.1.1.8
cdtPppMaxFailure This object specifies the number of Configure-Nak messages a target PPP connection can receive before the system abandons LCP or NCP negotiations. This column is valid only if the 'maxFailure' bit of the …	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.784.1.3.1.1.9
cdtPppMaxTerminate This object specifies the number of unacknowledged Terminate-Request messages a target PPP connection can send before the system abandons LCP or NCP negotiations. This column is valid only if the 'maxTerm…	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.784.1.3.1.1.10
cdtPppTimeoutAuthentication This objects specifies the maximum time the system will wait for a response to an authentication request on a target PPP connection. This column is valid only if the 'timeoutAuthentication' bit of the cor…	secondsUnsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.9.9.784.1.3.1.1.11
cdtPppTimeoutRetry This objects specifies the maximum time the system will wait for a response to a PPP control packets on a target PPP connection. This column is valid only if the 'timeoutRetry' bit of the corresponding in…	secondsUnsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.9.9.784.1.3.1.1.12
cdtPppChapOpts This object specifies how the system processes the CHAP on a target PPP connection: 'refuse' This option specifies that the system should refuse CHAP requests from peers of a target PP…	Bitsr/w Enumerated Values: 0 refuse 1 callin 2 wait 3 encrypted	.1.3.6.1.4.1.9.9.784.1.3.1.1.13
cdtPppChapHostname This object specifies the hostname sent in a CHAP response on a target PPP connection. If the template does not include this attribute, then the system uses its assigned hostname. This column is valid on…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.3.1.1.14
cdtPppChapPassword This object specifies the password used to construct a CHAP response on the target PPP connection. This column is valid only if the 'chapPassword' bit of the corresponding instance of cdtPppValid is '1'.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.3.1.1.15
cdtPppMsChapV1Opts This object specifies how the system processes version 1 of Microsoft CHAP on a target PPP connection: 'refuse' This option specifies that the system should refuse Microsoft CHAP (v1) …	Bitsr/w Enumerated Values: 0 refuse 1 callin 2 wait 3 encrypted	.1.3.6.1.4.1.9.9.784.1.3.1.1.16
cdtPppMsChapV1Hostname This object specifies the hostname sent in a Microsoft CHAP (v1) response on a target PPP connection. If the template does not include this attribute, then the system uses its assigned hostname. This col…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.3.1.1.17
cdtPppMsChapV1Password This object specifies the password used to construct a Microsoft CHAP (v1) response on a target PPP connection. This column is valid only if the 'msChapV1Password' bit of the corresponding instance of cdt…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.3.1.1.18
cdtPppMsChapV2Opts This object specifies how the system processes version 2 of Microsoft CHAP on a target PPP connection: 'refuse' This option specifies that the system should refuse Microsoft CHAP (v2) …	Bitsr/w Enumerated Values: 0 refuse 1 callin 2 wait 3 encrypted	.1.3.6.1.4.1.9.9.784.1.3.1.1.19
cdtPppMsChapV2Hostname This object specifies the hostname sent in a Microsoft CHAP (v2) response on a target PPP connection. If the template does not include this attribute, then the system uses its assigned hostname. This col…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.3.1.1.20
cdtPppMsChapV2Password This object specifies the password used to construct a Microsoft CHAP (v2) response on a target PPP connection. This column is valid only if the 'msChapV2Password' bit of the corresponding instance of cdt…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.3.1.1.21
cdtPppPapOpts This object specifies how the system processes the PAP on a target PPP connection: 'refuse' This option specifies that the system should refuse PAP requests from peers of a target PPP …	Bitsr/w Enumerated Values: 0 refuse 1 encrypted	.1.3.6.1.4.1.9.9.784.1.3.1.1.22
cdtPppPapUsername This object specifies the username sent in a PAP response on a target PPP connection. This column is valid only if the 'papUsername' bit of the corresponding instance of cdtPppValid is '1'.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.3.1.1.23
cdtPppPapPassword This object specifies the username used to construct a PAP response on a target PPP connection. This column is valid only if the 'papPassword' bit of the corresponding instance of cdtPppValid is '1'.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.3.1.1.24
cdtPppEapOpts This object specifies how the system processes the EAP on a target PPP connection: 'refuse' This option specifies that the system should refuse EAP requests from peers of a target PPP …	Bitsr/w Enumerated Values: 0 refuse 1 callin 2 wait 3 local	.1.3.6.1.4.1.9.9.784.1.3.1.1.25
cdtPppEapIdentity This object specifies the identity sent in an EAP response on a target PPP connection. This column is valid only if the 'eapIdentity' bit of the corresponding instance of cdtPppValid is '1'.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.3.1.1.26
cdtPppEapPassword This object specifies the password used to construct an EAP response on a target PPP connection. This column is valid only if the 'eapPassword' bit of the corresponding instance of cdtPppValid is '1'.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.3.1.1.27
cdtPppIpcpAddrOption This object specifies the IPCP address option for a target PPP connection: 'other' The implementation of this MIB module does not recognize the configured IPCP address option. …	Enumerationr/w Enumerated Values: 1 other 2 accept 3 required 4 unique	.1.3.6.1.4.1.9.9.784.1.3.1.1.28
cdtPppIpcpDnsOption This object specifies the IPCP DNS option for the dynamic interface: 'other' The implementation of this MIB module does not recognize the configured DNS option. 'acc…	Enumerationr/w Enumerated Values: 1 other 2 accept 3 request 4 reject	.1.3.6.1.4.1.9.9.784.1.3.1.1.29
cdtPppIpcpDnsPrimary This object specifies the IP address of the primary DNS server offered to the peer of a target PPP connection. This column is valid only if the 'ipcpDnsPrimary' bit of the corresponding instance of cdtPpp…	INET-ADDRESS-MIBInetAddressIPv4r/w Type Constraints: range: 4	.1.3.6.1.4.1.9.9.784.1.3.1.1.30
cdtPppIpcpDnsSecondary This object specifies the IP address of the secondary DNS server offered to the peer of a target PPP connection. This column is valid only if the 'ipcpDnsSecondary' bit of the corresponding instance of cd…	INET-ADDRESS-MIBInetAddressIPv4r/w Type Constraints: range: 4	.1.3.6.1.4.1.9.9.784.1.3.1.1.31
cdtPppIpcpWinsOption This object specifies the IPCP WINS option for a target PPP connection: 'other' The implementation of this MIB module does not recognize the configured WINS option. …	Enumerationr/w Enumerated Values: 1 other 2 accept 3 request 4 reject	.1.3.6.1.4.1.9.9.784.1.3.1.1.32
cdtPppIpcpWinsPrimary This object specifies the IP address of the primary WINS server offered to the peer of a target PPP connection. This column is valid only if the 'ipcpWinsPrimary' bit of the corresponding instance of cdtP…	INET-ADDRESS-MIBInetAddressIPv4r/w Type Constraints: range: 4	.1.3.6.1.4.1.9.9.784.1.3.1.1.33
cdtPppIpcpWinsSecondary This object specifies the IP address of the secondary WINS server offered to the peer of a target PPP connection. This column is valid only if the 'ipcpWinsSecondary' bit of the corresponding instance of …	INET-ADDRESS-MIBInetAddressIPv4r/w Type Constraints: range: 4	.1.3.6.1.4.1.9.9.784.1.3.1.1.34
cdtPppIpcpMaskOption This object specifies the IPCP IP subnet mask option for a target PPP connection: 'other' The implementation of this MIB module does not recognize the configured IP subnet mask option.…	Enumerationr/w Enumerated Values: 1 other 2 request 3 reject	.1.3.6.1.4.1.9.9.784.1.3.1.1.35
cdtPppIpcpMask This object specifies the IP address mask offered to the peer of a target PPP connection. This column is valid only if the 'ipcpMask' bit of the corresponding instance of cdtPppValid is '1'.	INET-ADDRESS-MIBInetAddressIPv4r/w Type Constraints: range: 4	.1.3.6.1.4.1.9.9.784.1.3.1.1.36
cdtPppPeerDefIpAddrOpts This object specifies options that affect how the system assigns an IP address to the peer of a target PPP connection: 'ipAddrForced' This option forces the system to assign the next a…	Bitsr/w Enumerated Values: 0 ipAddrForced 1 matchAaaPools 2 staticPool	.1.3.6.1.4.1.9.9.784.1.3.1.1.37
cdtPppPeerDefIpAddrSrc This object specifies how the system assigns an IP address to the peer of a target PPP connection: 'static' The system assigns the IP address specified by the corresponding instance of…	Enumerationr/w Enumerated Values: 1 static 2 pool 3 dhcp	.1.3.6.1.4.1.9.9.784.1.3.1.1.38
cdtPppPeerDefIpAddr This object specifies the IP address the system assigns to the peer of a target PPP connection. This column is valid only if the 'peerDefIpAddr' bit of the corresponding instance of cdtPppValid is '1'.	INET-ADDRESS-MIBInetAddressIPv4r/w Type Constraints: range: 4	.1.3.6.1.4.1.9.9.784.1.3.1.1.39

This table contains a prioritized list of named pools for each
PPP template.  A list corresponding to a PPP template
specifies the pools the system searches in an attempt to
assign an IP address to the peer of a target PPP connection.
The system searches the pools in the order of their priority.
          
This table has an expansion dependent relationship on the
cdtPppTemplateTable, containing zero or more rows for each PPP
template.

cdtPppPeerIpAddrPoolEntry row .1.3.6.1.4.1.9.9.784.1.3.2.1

An entry specifies a named pool in a list of pools associated
with a PPP template. A PPP template can only have named
pools associated with it if it has a cdtPppPeerIpAddrSrc of
'pool'.

Any attempt to crea…

Indexes

cdtTemplateName cdtPppPeerIpAddrPoolPriority

Column	Syntax	OID
cdtPppPeerIpAddrPoolPriority This object indicates the relative priority of the named pool in the list corresponding to a PPP template. The system searches pools in the order of priority, where lower values represent higher priority.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.9.9.784.1.3.2.1.1
cdtPppPeerIpAddrPoolStatus This object specifies the status of the entry. The following columns must be valid before activating a subscriber access profile: - cdtPppPeerIpAddrPoolStorage - cdtPppPeerIpAddrPoolName …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.784.1.3.2.1.2
cdtPppPeerIpAddrPoolStorage This object specifies what happens to the name pool entry upon restart. If the corresponding instance of cdtTemplateSrc is not 'local', then this column must be 'volatile'.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.784.1.3.2.1.3
cdtPppPeerIpAddrPoolName This object specifies the name of the IP address pool associated with the PPP template.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.3.2.1.4

This table contains attributes relating to dynamic interfaces
initiated on Ethernet virtual interfaces (e.g., EoMPLS) or
automatically created VLANs.
          
This table has a sparse-dependent relationship on the
cdtTemplateTable, containing a row for each dynamic template
having a cdtTemplateType of one of the following values:
          
    'derived'
    'ethernet'

cdtEthernetTemplateEntry row .1.3.6.1.4.1.9.9.784.1.4.1.1

An entry containing attributes relating to dynamic interfaces
initiated on Ethernet virtual interfaces (e.g., EoMPLS) or
automatically created VLANs.

The system automatically creates an entry when the syste…

Indexes

cdtTemplateName

Column	Syntax	OID
cdtEthernetValid This object specifies which attributes in the dynamic template have been configured to valid values. Each bit in this bit string corresponds to a column in this table. If the bit is '0', then the value o…	Bitsr/w Enumerated Values: 0 bridgeDomain 1 pppoeEnable 2 ipv4PointToPoint 3 macAddr	.1.3.6.1.4.1.9.9.784.1.4.1.1.1
cdtEthernetBridgeDomain This object specifies the name of the bridge domain...	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.4.1.1.2
cdtEthernetPppoeEnable This object specifies whether...	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.784.1.4.1.1.3
cdtEthernetIpv4PointToPoint This object specifies whether...	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.784.1.4.1.1.4
cdtEthernetMacAddr This object specifies the...	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.784.1.4.1.1.5

This table contains attributes relating to a service.
          
This table has a sparse-dependent relationship on the
cdtTemplateTable, containing a row for each dynamic template
having a cdtTemplateType of one of the following values:
          
    'derived'
    'service'

cdtSrvTemplateEntry row .1.3.6.1.4.1.9.9.784.1.6.1.1

An entry containing attributes relating to a service.

The system automatically creates entry when the system or the
EMS/NMS creates a row in the cdtTemplateTable with a
cdtTemplateType of one of the followi…

Indexes

cdtTemplateName

Column	Syntax	OID
cdtSrvValid This object specifies which attributes in the dynamic template have been configured to valid values. Each bit in this bit string corresponds to a column in this table. If the bit is '0', then the value o…	Bitsr/w Enumerated Values: 0 networkSrv 1 vpdnGroup 2 sgSrvGroup 3 sgSrvType 4 multicast	.1.3.6.1.4.1.9.9.784.1.6.1.1.1
cdtSrvNetworkSrv This object specifies the type of network service provided by the target service: 'other' The implementation of this MIB module does not recognize the configured network service. …	Enumerationr/w Enumerated Values: 1 other 2 none 3 local 4 vpdn	.1.3.6.1.4.1.9.9.784.1.6.1.1.2
cdtSrvVpdnGroup This object specifies the name of the VPDN group used to configure the network service. This column is valid only if the 'vpdnGroup' bit of the corresponding instance of cdtSrvValid is '1'.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.6.1.1.3
cdtSrvSgSrvGroup This object specifies the name of the service group with which the system associates subscriber sessions. A service group specifies a set of services that may be active simultaneously for a given subscriber session. T…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.784.1.6.1.1.4
cdtSrvSgSrvType This object specifies whether the target service specifies a network-forwarding policy: 'primary' The target service specifies a network-forwarding policy. Primary services are mutual…	Enumerationr/w Enumerated Values: 1 primary 2 secondary	.1.3.6.1.4.1.9.9.784.1.6.1.1.5
cdtSrvMulticast This objects specifies whether the system enables multicast service for subscriber sessions of the target service. This column is valid only if the 'sgSrvMcastRoutingIf' bit of the corresponding instance …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.784.1.6.1.1.6