CISCO-DOT11-ASSOCIATION-MIB Table View

This table contains the list of active devices
currently associated with this device on each of 
the IEEE 802.11 interfaces.  This table has a 
sparse dependent relationship on the ifTable.

cDot11ActiveDevicesEntry row .1.3.6.1.4.1.9.9.273.1.1.2.1

An entry represents a currently active device
associated with this device. These active devices
include: wireless clients, repeaters, and bridges.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cDot11ActiveWirelessClients This is the number of wireless clients currently associating with this device on this interface.	DeviceUnsigned32 Constraints: range: 0-2007	.1.3.6.1.4.1.9.9.273.1.1.2.1.1
cDot11ActiveBridges This is the number of bridges currently associating with this device on this interface.	DeviceUnsigned32 Constraints: range: 0-2007	.1.3.6.1.4.1.9.9.273.1.1.2.1.2
cDot11ActiveRepeaters This is the number of repeaters currently associating with this device on this interface.	DeviceUnsigned32 Constraints: range: 0-2007	.1.3.6.1.4.1.9.9.273.1.1.2.1.3

This table contains statistics for various
devices associated with this device on each 
of the IEEE 802.11 interfaces since it was 
last re-started.  These devices include: wireless 
clients, repeaters, and bridges.  This table has
a sparse dependent relationship on the ifTable.

cDot11AssociationStatsEntry row .1.3.6.1.4.1.9.9.273.1.1.3.1

Each entry provides association statistics of
various devices interacting with this device on
each of the IEEE 802.11 interfaces.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cDot11AssStatsAssociated This object counts the number of stations associated with this device on this interface since device re-started.	clientSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.1.3.1.1
cDot11AssStatsAuthenticated This object counts the number of stations authenticated with this device on this interface since device re-started.	clientSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.1.3.1.2
cDot11AssStatsRoamedIn This object counts the number of stations roamed from another device to this device on this interface since device re-started.	clientSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.1.3.1.3
cDot11AssStatsRoamedAway This object counts the number of stations roamed away from this device on this interface since device re-started.	clientSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.1.3.1.4
cDot11AssStatsDeauthenticated This object counts the number of stations deauthenticated with this device on this interface since device re-started.	clientSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.1.3.1.5
cDot11AssStatsDisassociated This object counts the number of stations disassociated with this device on this interface since device re-started.	clientSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.1.3.1.6

This table includes AES, TKIP, and security tempering
attempts statistics collected by the IEEE 802.11 radio
interfaces and system management.  This table has a
sparse dependent relationship on the ifTable.  For
each entry in this table, there exists an entry in the
ifTable of ifType ieee80211(71).

cd11IfCipherStatsEntry row .1.3.6.1.4.1.9.9.273.1.1.4.1

Each entry provides cipher related statistics
collected on each of the IEEE 802.11 interfaces.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cd11IfCipherMicFailClientAddress This is MAC address of the client attached to this radio interface that caused the most recent MIC failure.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.273.1.1.4.1.1
cd11IfCipherTkipLocalMicFailures This object counts the number of MIC failures encountered on this radio interface since device re-started.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.1.4.1.2
cd11IfCipherTkipRemotMicFailures This object counts the number of MIC failures reported by clients on this radio interface since device re-started.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.1.4.1.3
cd11IfCipherTkipCounterMeasInvok This object counts the number of TKIP Counter Measures invoked on this interface since device re-started.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.1.4.1.4
cd11IfCipherCcmpReplaysDiscarded This object counts the number of received unicast fragments discarded by replay mechanism on this interface since device re-started.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.1.4.1.5
cd11IfCipherTkipReplaysDetected This object counts the number of TKIP replay errors detected on this interface since device re-started.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.1.4.1.6

This table contains configuration information of
client devices.  Entries on this table are created
by the device radio driver when clients establish
association with the device.  Entries are removed
when clients disassociate with the device.  These 
clients include: wireless clients, repeaters, 
and bridges.  On Infrastructure clients like
repeaters, non-root bridges and workgroup bridges,
this table also has an entry for the parent device
they are associated to.

cDot11ClientConfigInfoEntry row .1.3.6.1.4.1.9.9.273.1.2.1.1

Each entry is the device specification of a client
of this device on the IEEE 802.11 radio interfaces.
Clients are grouped according to the SSIDs of the
interfaces they use for associations and the MAC
address of their …

Indexes

IF-MIBifIndex CISCO-DOT11-IF-MIBcd11IfAuxSsid cDot11ClientAddress

Column	Syntax	OID
cDot11ClientAddress The MAC address of the client.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.273.1.2.1.1.1
cDot11ClientParentAddress The MAC address of the parent of the client if the client is a repeater AP. If this client has no parent, the value is '00000000'h.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.273.1.2.1.1.2
cDot11ClientRoleClassType The role classification of the client.	CDot11ClientRoleClassType Type Values: 0 clientStation 1 repeater 2 accessPoint 3 bridgeHost 4 bridge 5 bridgeRoot 6 ethernetClient	.1.3.6.1.4.1.9.9.273.1.2.1.1.3
cDot11ClientDevType The device type of the client.	CDot11ClientDevType Type Values: 1 unknown 76 ethernetAP 77 ethernetBridge 84 pc3000Client 85 serialUC 86 ethernetUC 101 pc3500Client 102 pc4500Client 104 generic80211Client 109 pc4800Client 110 pc3100Client 111 mc 112 ethernetClient 117 pc4800bClient 123 wgbNoDiversity 124 wgb 127 series350Client 128 series370Client 129 c1100SeriesAP 130 c1410SeriesBridge 132 c1200SeriesAP 133 mp2xClient 134 c350SeriesAP 135 cb21agClient 136 radioKodiak 137 c1130SeriesAP 138 c1310SeriesBridge 139 c7920phone 140 c1240SeriesAP	.1.3.6.1.4.1.9.9.273.1.2.1.1.4
cDot11ClientRadioType The radio classification of the client.	CDot11ClientRadioType Type Values: 1 unknown 2 ccxClient 3 pc3500 4 pc3000 6 pc4500 12 pc4800 13 pc3100 33 series340 34 series350 35 series370 36 bridge1410 37 mp2xSeries 38 rm2xSeries 39 rm2gSeries 40 mp2xMAR 46 cb21ag	.1.3.6.1.4.1.9.9.273.1.2.1.1.5
cDot11ClientWepEnabled When this object is 'true', it indicates that the WEP key mechanism is used for transmitting frames of data for this client. The default value of this object is 'false'.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.273.1.2.1.1.6
cDot11ClientWepKeyMixEnabled When this object is 'true', it indicates that this client is using WEP key mixing.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.273.1.2.1.1.7
cDot11ClientMicEnabled When this object is 'true', it indicates that the MIC is enabled for this client. The default value of this object is 'false'.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.273.1.2.1.1.8
cDot11ClientPowerSaveMode The power management mode of this client. The two possible modes are: active(1) - this client is not in power-save mode and it is actively sending or receiving data. p…	Enumeration Enumerated Values: 1 active 2 powersave	.1.3.6.1.4.1.9.9.273.1.2.1.1.9
cDot11ClientAid This is the association identification number of clients or multicast addresses associating with this device. For a multicast address with clients, the cDot11ClientAid is '0'. For the uplink association from this dev…	Unsigned32 Constraints: range: 0-2008	.1.3.6.1.4.1.9.9.273.1.2.1.1.10
cDot11ClientDataRateSet This is the set of data rates at which this client can transmit and receive data. Each client can support up to 126 rates. Each octet contains an integer value representing one of these 126 rates. Each rate shall …	OctetString Constraints: range: 1-126	.1.3.6.1.4.1.9.9.273.1.2.1.1.11
cDot11ClientSoftwareVersion This is the Cisco IOS software version if the other end of the association is a bridge, access point, or repeater. If it is a wireless client, this is the firmware version of the client card.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.273.1.2.1.1.12
cDot11ClientName This is the Cisco IOS device hostname if the other end of the association is a bridge, access point, or repeater. If it is a wireless client, this is the configured client name.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.273.1.2.1.1.13
cDot11ClientAssociationState This object indicates the state of the authentication and association process between the two parties: initial(1) - association request received from client, authenNotAs…	Enumeration Enumerated Values: 1 initial 2 authenNotAssociated 3 assocAndAuthenticated 4 assocNotAnuthenticated	.1.3.6.1.4.1.9.9.273.1.2.1.1.14
cDot11ClientIpAddressType This is the IP address type of the cDot11ClientIpAddress.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.273.1.2.1.1.15
cDot11ClientIpAddress This is the static or DHCP assigned IP address of the client.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.273.1.2.1.1.16
cDot11ClientVlanId This is the VLAN which this wireless client is assigned to when it is successfully associated to the wireless station. The value is 0 if this wireless client is not assigned to any VLAN or this wireless station is not…	CISCO-DOT11-IF-MIBCDot11IfVlanIdOrZero Type Constraints: range: 0..4095	.1.3.6.1.4.1.9.9.273.1.2.1.1.17
cDot11ClientSubIfIndex This is the ifIndex of the sub-interface which this wireless client is assigned to when it is successfully associated to the wireless station. The value of this object is 0, if this wireless station is not configured w…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.273.1.2.1.1.18
cDot11ClientAuthenAlgorithm This is the IEEE 802.11 authentication methods performed between the wireless station and this client during association.	CDot11AuthenticationMethod Type Values: 1 open 2 sharedKey 129 networkEap	.1.3.6.1.4.1.9.9.273.1.2.1.1.19
cDot11ClientAdditionalAuthen These are the additional authentications that were performed after IEEE 802.11 Open System or Shared Key authentication had completed. If none of the bits is set, no additional MAC address or EAP authentication was pe…	CDot11AdditionalAuthenMethod Type Values: 0 mac 1 eap	.1.3.6.1.4.1.9.9.273.1.2.1.1.20
cDot11ClientDot1xAuthenAlgorithm This the IEEE 802.1x authentication methods performed between this wireless client and the authentication server. If none of the bits is set, no IEEE 802.1x authentication was performed during association.	CDot11Dot1xAuthenMethod Type Values: 0 md5 1 leap 2 peap 3 eapTls 4 eapSim 5 eapFast	.1.3.6.1.4.1.9.9.273.1.2.1.1.21
cDot11ClientKeyManagementdeprecated This is the encryption key management methods employed by this client for IEEE 802.11 wireless frame encryption. If none of the bits is set, no key management method is employed.	CDot11KeyManagementMethod Type Values: 0 wpa 1 cckm	.1.3.6.1.4.1.9.9.273.1.2.1.1.22
cDot11ClientUnicastCipher These are all the possible unicast data frame cipher encryption type combinations currently supported on this IEEE 802.11 client. If none of the bits is set, the client is not performing any unicast data frame encryp…	CISCO-DOT11-IF-MIBCDot11IfCipherType Type Values: 0 ckip 1 cmic 2 tkip 3 wep40 4 wep128 5 aesccm	.1.3.6.1.4.1.9.9.273.1.2.1.1.23
cDot11ClientMulticastCipher These are all the possible multi-cast data frame cipher encryption type combinations currently supported on this IEEE 802.11 client. If none of the bits is set, the client is not performing any multi-cast data frame e…	CISCO-DOT11-IF-MIBCDot11IfCipherType Type Values: 0 ckip 1 cmic 2 tkip 3 wep40 4 wep128 5 aesccm	.1.3.6.1.4.1.9.9.273.1.2.1.1.24
cDot11ClientDevObjectID This object indicates the authoritative identification of the associated 802.11 client as assigned by the respective vendor. A value of '0.0' shall be populated if no such identification exists for this 802.11 client.	ObjectIdentifier	.1.3.6.1.4.1.9.9.273.1.2.1.1.25
cDot11ClientNewKeyManagement This is the encryption key management methods employed by this client for IEEE 802.11 wireless frame encryption. If none of the bits is set, no key management method is employed.	CDot11NewKeyManagementMethod Type Values: 0 cckm 1 wpa1 2 wpa2	.1.3.6.1.4.1.9.9.273.1.2.1.1.26

This table contains statistics and status of all
clients on the cDot11ClientConfigInfoTable.  This table 
has a one-to-one relationship with the 
cDot11ClientConfigInfoTable.

cDot11ClientStatisticEntry row .1.3.6.1.4.1.9.9.273.1.3.1.1

Each entry contains statistics about errors,
data transmitting and receiving rates and counts
information of a client.

Indexes

No indexes recorded

Column	Syntax	OID
cDot11ClientCurrentTxRateSet This is the set current transmit data rates for this client. Each client can transmit data at all of its configured rates. There is a maximum of 126 it can configure to transmit. Each octet contains an integer valu…	OctetString Constraints: range: 1-126	.1.3.6.1.4.1.9.9.273.1.3.1.1.1
cDot11ClientUpTime The time in seconds that this client has been associated with this device.	secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.3.1.1.2
cDot11ClientSignalStrength This is a device-dependent measure of the signal strength of the most recently received packet from this client. It may be normalized or unnormalized.	dBmInteger32 Constraints: range: -100-0	.1.3.6.1.4.1.9.9.273.1.3.1.1.3
cDot11ClientSigQuality This is a device-dependent measure of the signal quality of the most recently received packet from this client.	percentageUnsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.9.9.273.1.3.1.1.4
cDot11ClientAgingLeft The number of seconds of aging time left for this client.	secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.3.1.1.5
cDot11ClientPacketsReceived The number of packets received from this client.	packetSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.3.1.1.6
cDot11ClientBytesReceived The number of bytes received from this client.	byteSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.3.1.1.7
cDot11ClientPacketsSent The number of packets sent to this client.	packetSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.3.1.1.8
cDot11ClientBytesSent The number of bytes sent to this client.	byteSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.3.1.1.9
cDot11ClientDuplicates This counter increments when a packet for this client is received and the Sequence Control field in the packet header indicates the packet is a duplicate.	packetSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.3.1.1.10
cDot11ClientMsduRetries This counter increments when an MSDU is successfully transmitted after one or more retransmissions for this client.	packetSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.3.1.1.11
cDot11ClientMsduFails This counter increments when an MSDU is not transmitted successfully for this client due to the number of transmit attempts exceeding some limit.	packetSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.3.1.1.12
cDot11ClientWepErrors This is the number of packets received from this client which failed to be properly decrypted via the WEP security mechanism.	packetSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.3.1.1.13
cDot11ClientMicErrors This is the number of MIC errors for this client.	errorSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.3.1.1.14
cDot11ClientMicMissingFrames This is the number of missing MIC packets for this client.	packetSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.273.1.3.1.1.15

Station Information parameters.

ciscoDot11StationInfoEntry row .1.3.6.1.4.1.9.9.273.1.5.1

Status and parameter values for the wireless client.

Indexes

IF-MIBifIndex

Column	Syntax	OID
clientMacAddr Indicates wireless client mac address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.273.1.5.1.1
clientDeviceType Indicates wireless client device type. possible types are client, ethernet, AP, Bridge, Repeater, WGB	CDot11ClientRoleClassType Type Values: 0 clientStation 1 repeater 2 accessPoint 3 bridgeHost 4 bridge 5 bridgeRoot 6 ethernetClient	.1.3.6.1.4.1.9.9.273.1.5.1.2
clientDeviceName Indicates Cisco IOS device hostname .	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.273.1.5.1.3
clientIpv4Address Indicates wireless client IPv4 address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.273.1.5.1.4
clientIpv6Address Indicates wireless client IPv6 address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.273.1.5.1.5
apMacAddr Indicates AP mac address which client associated.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.273.1.5.1.6
apIpv4Address Indicates AP IPv4 address that wireless client associates.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.273.1.5.1.7
apIpv6Address Indicates AP IPv6 address that wireless client associates.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.273.1.5.1.8
clientStationState This object indicates the state of the authentication and association process between the two parties: associated(1) - client associates to AP disAssociated(2) - client disassociates to AP run(3) - client passes authent…	Enumeration Enumerated Values: 1 associated 2 disAssociated 3 run	.1.3.6.1.4.1.9.9.273.1.5.1.9
clientDisassocReasonStr This attribute holds the most recently transmitted Reason in a Disassociation frame.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.273.1.5.1.10