cDot11ClientUnicastCipher

CISCO-DOT11-ASSOCIATION-MIB · .1.3.6.1.4.1.9.9.273.1.2.1.1.23

Object

column CISCO-DOT11-IF-MIBCDot11IfCipherType

These are all the possible unicast data frame cipher
encryption type combinations currently supported on 
this IEEE 802.11 client.  If none of the bits is set,
the client is not performing any unicast data frame 
encryption.
    aesccm      WPA AES CCMP encryption,
    ckip        Cisco Per packet key hashing,
    cmic        Cisco MMH MIC,
    ckip|cmic   Cisco Per packet key hashing and 
                Cisco MMH MIC,
    tkip        WPA Temporal Key encryption,
    wep128      128-bit WEP key,
    wep40       40-bit WEP key.
    tkip|wep128 WPA Temporal Key and 128-bit WEP,
    tkip|wep40  WPA Temporal Key and 40-bit WEP.

Context

MIB: CISCO-DOT11-ASSOCIATION-MIB
OID: .1.3.6.1.4.1.9.9.273.1.2.1.1.23
Type: column
Access: readonly
Status: current
Parent: cDot11ClientConfigInfoEntry
Table: cDot11ClientConfigInfoTable
Siblings: 25

Syntax

CISCO-DOT11-IF-MIBCDot11IfCipherType

Source: CISCO-DOT11-IF-MIBCDot11IfCipherType
Base type: Bits

Values & Constraints

Type Values

`0`	ckip
`1`	cmic
`2`	tkip
`3`	wep40
`4`	wep128
`5`	aesccm

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cDot11ClientAddress The MAC address of the client.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.9.9.273.1.2.1.1.1`
cDot11ClientAid This is the association identification number of clients or multicast addresses associating with this device. For a multicast address with clients, the cDot11ClientAid is '0'. …	column	Unsigned32	`.1.3.6.1.4.1.9.9.273.1.2.1.1.10`
cDot11ClientDataRateSet This is the set of data rates at which this client can transmit and receive data. Each client can support up to 126 rates. Each octet contains an integer value representing on…	column	OctetString	`.1.3.6.1.4.1.9.9.273.1.2.1.1.11`
cDot11ClientSoftwareVersion This is the Cisco IOS software version if the other end of the association is a bridge, access point, or repeater. If it is a wireless client, this is the firmware version of th…	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.273.1.2.1.1.12`
cDot11ClientName This is the Cisco IOS device hostname if the other end of the association is a bridge, access point, or repeater. If it is a wireless client, this is the configured client name.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.273.1.2.1.1.13`
cDot11ClientAssociationState This object indicates the state of the authentication and association process between the two parties: initial(1) - association request …	column	Enumeration	`.1.3.6.1.4.1.9.9.273.1.2.1.1.14`
cDot11ClientIpAddressType This is the IP address type of the cDot11ClientIpAddress.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.9.9.273.1.2.1.1.15`
cDot11ClientIpAddress This is the static or DHCP assigned IP address of the client.	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.273.1.2.1.1.16`
cDot11ClientVlanId This is the VLAN which this wireless client is assigned to when it is successfully associated to the wireless station. The value is 0 if this wireless client is not assigned to …	column	CISCO-DOT11-IF-MIBCDot11IfVlanIdOrZero	`.1.3.6.1.4.1.9.9.273.1.2.1.1.17`
cDot11ClientSubIfIndex This is the ifIndex of the sub-interface which this wireless client is assigned to when it is successfully associated to the wireless station. The value of this object is 0, if t…	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.9.9.273.1.2.1.1.18`
cDot11ClientAuthenAlgorithm This is the IEEE 802.11 authentication methods performed between the wireless station and this client during association.	column	CDot11AuthenticationMethod	`.1.3.6.1.4.1.9.9.273.1.2.1.1.19`
cDot11ClientParentAddress The MAC address of the parent of the client if the client is a repeater AP. If this client has no parent, the value is '00000000'h.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.9.9.273.1.2.1.1.2`
cDot11ClientAdditionalAuthen These are the additional authentications that were performed after IEEE 802.11 Open System or Shared Key authentication had completed. If none of the bits is set, no additional M…	column	CDot11AdditionalAuthenMethod	`.1.3.6.1.4.1.9.9.273.1.2.1.1.20`
cDot11ClientDot1xAuthenAlgorithm This the IEEE 802.1x authentication methods performed between this wireless client and the authentication server. If none of the bits is set, no IEEE 802.1x authentication was …	column	CDot11Dot1xAuthenMethod	`.1.3.6.1.4.1.9.9.273.1.2.1.1.21`
cDot11ClientKeyManagement deprecated This is the encryption key management methods employed by this client for IEEE 802.11 wireless frame encryption. If none of the bits is set, no key management method is employed.	column	CDot11KeyManagementMethod	`.1.3.6.1.4.1.9.9.273.1.2.1.1.22`
cDot11ClientMulticastCipher These are all the possible multi-cast data frame cipher encryption type combinations currently supported on this IEEE 802.11 client. If none of the bits is set, the client is not…	column	CISCO-DOT11-IF-MIBCDot11IfCipherType	`.1.3.6.1.4.1.9.9.273.1.2.1.1.24`
cDot11ClientDevObjectID This object indicates the authoritative identification of the associated 802.11 client as assigned by the respective vendor. A value of '0.0' shall be populated if no such identi…	column	ObjectIdentifier	`.1.3.6.1.4.1.9.9.273.1.2.1.1.25`
cDot11ClientNewKeyManagement This is the encryption key management methods employed by this client for IEEE 802.11 wireless frame encryption. If none of the bits is set, no key management method is employed.	column	CDot11NewKeyManagementMethod	`.1.3.6.1.4.1.9.9.273.1.2.1.1.26`
cDot11ClientRoleClassType The role classification of the client.	column	CDot11ClientRoleClassType	`.1.3.6.1.4.1.9.9.273.1.2.1.1.3`
cDot11ClientDevType The device type of the client.	column	CDot11ClientDevType	`.1.3.6.1.4.1.9.9.273.1.2.1.1.4`
cDot11ClientRadioType The radio classification of the client.	column	CDot11ClientRadioType	`.1.3.6.1.4.1.9.9.273.1.2.1.1.5`
cDot11ClientWepEnabled When this object is 'true', it indicates that the WEP key mechanism is used for transmitting frames of data for this client. The default value of this object is 'false'.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.273.1.2.1.1.6`
cDot11ClientWepKeyMixEnabled When this object is 'true', it indicates that this client is using WEP key mixing.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.273.1.2.1.1.7`
cDot11ClientMicEnabled When this object is 'true', it indicates that the MIC is enabled for this client. The default value of this object is 'false'.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.273.1.2.1.1.8`
cDot11ClientPowerSaveMode The power management mode of this client. The two possible modes are: active(1) - this client is not in power-save mode and it is actively sending or …	column	Enumeration	`.1.3.6.1.4.1.9.9.273.1.2.1.1.9`