CISCO-DLSW-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
40

cdeTConnConfigTable

table
.1.3.6.1.4.1.9.9.74.1.3.1 · 1 row entry · 14 columns
Open in standard view 
This table defines the peer transport connections
that will be initiated or accepted by this
DLSw.  Structure of masks allows wildcard
definition for a collection of transport
connections by a conceptual row.  For a
specific transport connection, there may
be multiple conceptual rows that match the
transport address.  The `best' match will be
the one to determine the characteristics
of the transport connection.
              
This table augments dlswTConnConfigTable.
cdeTConnConfigEntry entry .1.3.6.1.4.1.9.9.74.1.3.1.1
A list of objects that define specific configuration for
a DLSw peer transport connection.
Indexes
No indexes recorded
Column Syntax OID
cdeTConnConfigTDomainType
The type of DLSw encapsulation in use on this peer connection.
TDomainTyper/w
Textual Convention: TDomainType Enumeration
Type Values:
1tcp
2fst
3directHdlc
4directFrameRelay
5llc2
 .1.3.6.1.4.1.9.9.74.1.3.1.1.1
cdeTConnConfigLocalAck
Reflects whether the peer connection is locally acknowledged.
Locally acknoledgement means terminating the DLC connections
at the router, eliminating the requirement for link-layer
acknowledgements and keepalive message…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.74.1.3.1.1.2
cdeTConnConfigCost
The cost associated with the transport connection,
assigned to this conceptual row representing a peer.
If an end station can be reached through more
than one peer, the cost of each peer will be considered when
a circui…
Costr/w
Textual Convention: Cost Integer32
Type Constraints:
range: 1..5
 .1.3.6.1.4.1.9.9.74.1.3.1.1.3
cdeTConnConfigLFSize
The Largest Frame Size associated with the transport connection.
In other words its the largest size of the INFO field
(including DLC header, not including any MAC-level or framing
octets).
DLSW-MIBLFSizer/w
Textual Convention: DLSW-MIBLFSize Enumeration
Type Values:
516lfs516
635lfs635
754lfs754
873lfs873
993lfs993
1112lfs1112
1231lfs1231
1350lfs1350
1470lfs1470
1542lfs1542
1615lfs1615
1688lfs1688
1761lfs1761
1833lfs1833
1906lfs1906
1979lfs1979
2052lfs2052
2345lfs2345
2638lfs2638
2932lfs2932
3225lfs3225
3518lfs3518
3812lfs3812
4105lfs4105
4399lfs4399
4865lfs4865
5331lfs5331
5798lfs5798
6264lfs6264
6730lfs6730
7197lfs7197
7663lfs7663
8130lfs8130
8539lfs8539
8949lfs8949
9358lfs9358
9768lfs9768
10178lfs10178
10587lfs10587
10997lfs10997
11407lfs11407
12199lfs12199
12992lfs12992
13785lfs13785
14578lfs14578
15370lfs15370
16163lfs16163
16956lfs16956
17749lfs17749
20730lfs20730
23711lfs23711
26693lfs26693
29674lfs29674
32655lfs32655
38618lfs38618
41600lfs41600
44591lfs44591
47583lfs47583
50575lfs50575
53567lfs53567
56559lfs56559
59551lfs59551
65535lfs65535
 .1.3.6.1.4.1.9.9.74.1.3.1.1.4
cdeTConnConfigKeepaliveInterval
The amount of time between keepalive messages on a transport
connection.
The keepalive parameter refers to how often DLSw peers
send peer keep alives to each other. These periodic messages
allow DLSw to keep track of t…
SecondsKeepaliveIntervalr/w
Textual Convention: KeepaliveInterval Integer32
Type Constraints:
range: 0..1200
 .1.3.6.1.4.1.9.9.74.1.3.1.1.5
cdeTConnConfigBackup
This variable indicates if this peer is defined
as a backup to an existing peer. A backup peer is used
to provide an alternate path in case an existing peer becomes
unavailable. A backup peer will not enter the connec…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.74.1.3.1.1.6
cdeTConnConfigBackupTAddr
The primary peer's IP address that this entry backs up.
Valid only when ciscoDlswTConnConfigBackup is true.
DLSW-MIBTAddressr/w
Textual Convention: DLSW-MIBTAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.74.1.3.1.1.7
cdeTConnConfigBackupLinger
This variable indicates whether the backup peer will
remain connected after the primary peer connection has
been re-established.
True indicates that the backup peer will remain connected after
the primary peer connectio…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.74.1.3.1.1.8
cdeTConnConfigBackupLingerInterval
This variable indicates the length of time the backup peer
remains connected after the primary peer connection has
been re-established. If this variable is zero, the backup peer
will be disconnected immediately after t…
MinutesInteger32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.9.9.74.1.3.1.1.9
cdeTConnConfigPriority
Indicator of whether this peer connection supports priority.
When priority is configured for the remote peer,
DLSw+ will automatically activate four TCP connections to that
remote peer (ports 2065, 1981, 1982, and 1983)…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.74.1.3.1.1.10
cdeTConnConfigDestMac
Permits the peer connection to be established only when there is an
explorer frame destined for the specified 48-bit MAC address.

If no expolorer traffic with a destination address of
cdeTConnConfigDestM…
DLSW-MIBMacAddressNCr/w
Textual Convention: DLSW-MIBMacAddressNC OctetString
Type Constraints:
range: 0
range: 6
 .1.3.6.1.4.1.9.9.74.1.3.1.1.11
cdeTConnConfigDynamic
Indicates the peer connection is to be established only
when there is DLSw+ data to send.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.74.1.3.1.1.12
cdeTConnConfigDynamicNoLlc
This variable indicates the length of time a dynamic peer
remains connected after all LLC2 circuits are gone.
MinutesInteger32r/w
Constraints:
range: 1-300
 .1.3.6.1.4.1.9.9.74.1.3.1.1.13
cdeTConnConfigDynamicInactivityInterval
Indicates the length of time a connection can be idle before
closing the dynamic peer connection. If set to zero, the dynamic
peer connection will not be closed due to inactivity.
MinutesInteger32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.9.9.74.1.3.1.1.14

cdeTConnOperTable

table
.1.3.6.1.4.1.9.9.74.1.3.2 · 1 row entry · 5 columns
Open in standard view 
A list of peer transport connections.
Each connected peer will create a conceptual row in the table.
When the peer disconnects, the row will be deleted from the table.
This table augments dlswTConnOperTable.
cdeTConnOperEntry entry .1.3.6.1.4.1.9.9.74.1.3.2.1
A list of objects that contain spefific operational
information for a DLSw peer transport connection.
Indexes
No indexes recorded
Column Syntax OID
cdeTConnOperPartnerCost
The partner's cost on this peer connection, as received
through capabilities exchange.
If an end station can be reached through more
than one peer, the cost of each peer will be considered when
a circuit is established.…
Cost
Textual Convention: Cost Integer32
Type Constraints:
range: 1..5
 .1.3.6.1.4.1.9.9.74.1.3.2.1.1
cdeTConnOperPartnerPriority
The partner's priority setting on this peer connection,
as received through capabilities exchange.
When priority is enabled for the remote peer,
DLSw+ will automatically activate four TCP connections to that
remote peer…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.74.1.3.2.1.2
cdeTConnOperPartnerBorderPeer
This variable indicates if the partner DLSw is capable of
operating as a border peer, as received through capabilities
exchange. True indicates that it is
capable, false indicates that it is not.

Border …
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.74.1.3.2.1.3
cdeTConnOperPartnerGroupNum
This variable indicates the partner's group number, as
received through capabilities exchange.
Peer groups are arbitrary groups of routers with one or
more designated border peers. Border peers form peer
connections wi…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.74.1.3.2.1.4
cdeTConnOperTDomainType
The type of DLSw encapsulation in use on this peer connection.
TDomainType
Textual Convention: TDomainType Enumeration
Type Values:
1tcp
2fst
3directHdlc
4directFrameRelay
5llc2
 .1.3.6.1.4.1.9.9.74.1.3.2.1.5

cdeTConnTcpConfigTable

table
.1.3.6.1.4.1.9.9.74.1.3.3.1.1 · 1 row entry · 1 columns
Open in standard view 
This table defines the TCP transport connections that
will be either initiated by or accepted by this DSLw.
It augments the entries in dlswTConnConfigTable whose
domain is dlswTCPDomain.  In other words for each conceptual row
in the dlswTConnConfigTable, if the dlswTConnConfigTDomain is
dlswTCPDomain, that conceptual row will be augmented by this
table.
          
dlswTCPDomain, dlswTConnConfigTable, and dlswTConnConfigTDomain
are all imported from DLSW-MIB (RFC 2024).
          
This table augments dlswTConnTcpConfigTable.
cdeTConnTcpConfigEntry entry .1.3.6.1.4.1.9.9.74.1.3.3.1.1.1
A list of objects that define spefific configuration for
a DLSw peer transport connection within the dlswTCPDomain.
dlswTCPDomain is imported from DLSW-MIB (RFC 2024).
Indexes
No indexes recorded
Column Syntax OID
cdeTConnTcpConfigQueueMax
Maximum output TCP queue size for this remote peer.
For DLSw over TCP encapsulation, packets may be queued
due to congestion of the TCP network. This variable
is used to set the output queue maximum of the underlying
T…
packetsTCPQueueMaxr/w
Textual Convention: TCPQueueMax Integer32
Type Constraints:
range: 25..2000
 .1.3.6.1.4.1.9.9.74.1.3.3.1.1.1.1

cdeTConnDirectConfigTable

table
.1.3.6.1.4.1.9.9.74.1.3.3.2.1 · 1 row entry · 3 columns
Open in standard view 
This table contains direct peer media-specific
configuration information. 
An entry is maintained for every peer in the 
cdeTConnConfigTable whose domain is either cdeDirectHdlcDomain,
cdeDirectFrameRelayDomain, or cdeLlc2Domain.
          
In other words, for each conceptual row
in the dlswTConnConfigTable, if the dlswTConnConfigTDomain is
either cdeDirectHdlcDomain, cdeDirectFrameRelayDomain, or
cdeLlc2Domain, there will be an entry in this table.
          
dlswTConnConfigTable, and dlswTConnConfigTDomain
are imported from DLSW-MIB (RFC 2024).
cdeTConnDirectConfigEntry entry .1.3.6.1.4.1.9.9.74.1.3.3.2.1.1
Each conceptual row defines parameters that are
specific to peer transport connections whose domain is
either cdeDirectHdlcDomain, cdeDirectFrameRelayDomain, or
cdeLlc2Domain.
Indexes
DLSW-MIBdlswTConnConfigIndex
Column Syntax OID
cdeTConnDirectConfigIfIndex
The IfEntry index of the local interface,
on which the direct peer can be reached.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.9.74.1.3.3.2.1.1.1
cdeTConnDirectConfigMediaEncap
The type of media encapsulation to be used on this
peer connection. When using DLSw Direct-encapsulation or
DLSw Lite (Frame Relay) encapsulation, the peer transport
connection is defined as either directHdlc or direc…
Enumerationr/w
Enumerated Values:
1directHdlc
2directFrameRelay
3llc2
 .1.3.6.1.4.1.9.9.74.1.3.3.2.1.1.2
cdeTConnDirectConfigFrameRelayDlci
The Data Link Connection Identifier for the virtual
circuit on this interface. This object will only
be valid if the value of
cdeTConnDirectConfigMediaEncap is llc2.
CISCO-FRAME-RELAY-MIBDlciNumberr/w
Textual Convention: CISCO-FRAME-RELAY-MIBDlciNumber Integer32
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.9.9.74.1.3.3.2.1.1.3

cdeIfTable

table
.1.3.6.1.4.1.9.9.74.1.4.1 · 1 row entry · 1 columns
Open in standard view 
The list of interfaces on which DLSw is active.
          
This table augments dlswIfTable.
cdeIfEntry entry .1.3.6.1.4.1.9.9.74.1.4.1.1
Each conceptual row represents an interface.
Indexes
No indexes recorded
Column Syntax OID
cdeIfType
The DLC protocol in use on this DLSw interface.
DLSW-MIBDlcType
Textual Convention: DLSW-MIBDlcType Enumeration
Type Values:
1other
2na
3llc
4sdlc
5qllc
 .1.3.6.1.4.1.9.9.74.1.4.1.1.1

cdeCircuitTable

table
.1.3.6.1.4.1.9.9.74.1.5.1 · 1 row entry · 4 columns
Open in standard view 
A list of circuits.  Each new circuit will create a conceptual row 
in the table.
When the circuit disconnects, the row will be deleted from the table.
End station 1 (S1) and End station 2 (S2) are used to
represent the two end stations of the circuit.
S1 is always an end station which is locally attached.
S2 may be locally attached or remote.  
          
This table augments the dlswCircuitTable.
cdeCircuitEntry entry .1.3.6.1.4.1.9.9.74.1.5.1.1
A list of objects that contain specific
information for a DLSw circuit.
Indexes
No indexes recorded
Column Syntax OID
cdeCircuitS1Name
Represents the PU Name of End Station 1 (S1), if available.
OctetString
Constraints:
range: 0-17
 .1.3.6.1.4.1.9.9.74.1.5.1.1.1
cdeCircuitS2Name
Represents the PU Name of End Station 2 (S2), if available.
OctetString
Constraints:
range: 0-17
 .1.3.6.1.4.1.9.9.74.1.5.1.1.2
cdeCircuitS1IdBlock
The block number is the first three digits of the SNA Node id of
End Station 1 (S1), if available. These 3 hexadecimal digits
identify the product.
OctetString
Constraints:
range: 0-3
 .1.3.6.1.4.1.9.9.74.1.5.1.1.3
cdeCircuitS1IdNum
The ID number is the last 5 digits of the SNA Node id of End
Station 1 (S1), if available. These 5 hexadecimal digits are
administratively defined and combined with the 3 digit
block number form the Node id. This Node…
OctetString
Constraints:
range: 0-5
 .1.3.6.1.4.1.9.9.74.1.5.1.1.4

cdeFastTable

table
.1.3.6.1.4.1.9.9.74.1.6.1 · 1 row entry · 12 columns
Open in standard view 
A table containing fast cache entries.
The table contains cache information for FST peers or
direct encapsulation peers (without local acknowledgement enabled).
          
When using these encapsulation types, a fast-switching
cache must be built. The first frame between two end
stations will be process switched, and during this
process an entry will be made in the fast-switching
cache so that subsequent frames between those end
stations may be fast switched.
          
End station 1 (S1) and End station 2 (S2) are used to
represent the two end stations of the faat cache entry.
S1 is always an end station which is locally attached.
S2 is always an end station which is remote.
cdeFastEntry entry .1.3.6.1.4.1.9.9.74.1.6.1.1
A list of objects that define specific information
for a DLSw fast cache entry.
Indexes
cdeFastS1Mac cdeFastS1Sap cdeFastS2Mac cdeFastS2Sap
Column Syntax OID
cdeFastS1Mac
The MAC Address of End Station 1 (S1) used for this cache entry.
DLSW-MIBMacAddressNC
Textual Convention: DLSW-MIBMacAddressNC OctetString
Type Constraints:
range: 0
range: 6
 .1.3.6.1.4.1.9.9.74.1.6.1.1.1
cdeFastS1Sap
The SAP at End Station 1 (S1) used for this cache entry.
CISCO-TCSAPType
Textual Convention: CISCO-TCSAPType Integer32
Type Constraints:
range: 0..254
 .1.3.6.1.4.1.9.9.74.1.6.1.1.2
cdeFastS2Mac
The MAC Address of End Station 2 (S2) used for this cache entry.
DLSW-MIBMacAddressNC
Textual Convention: DLSW-MIBMacAddressNC OctetString
Type Constraints:
range: 0
range: 6
 .1.3.6.1.4.1.9.9.74.1.6.1.1.3
cdeFastS2Sap
The SAP at End Station 2 (S2) used for this cache entry.
CISCO-TCSAPType
Textual Convention: CISCO-TCSAPType Integer32
Type Constraints:
range: 0..254
 .1.3.6.1.4.1.9.9.74.1.6.1.1.4
cdeFastS1IfIndex
The ifEntry index of the local interface through which S1
can be reached.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.9.74.1.6.1.1.5
cdeFastS1RouteInfo
If source-route bridging is in use between the DLSw
and S1, this is the routing information field
describing the path between the two devices.
Otherwise the value will be an OCTET STRING of
zero length.
OctetString
Constraints:
range: 0-30
 .1.3.6.1.4.1.9.9.74.1.6.1.1.6
cdeFastS1CacheId
The Cache ID assigned by this DLSw to this fast cache entry.
Every Fast cache entry will have a unique id.
A management station could use this object by periodically
polling this table, and determine whether the same ca…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.9.9.74.1.6.1.1.7
cdeFastS2TDomain
This object contains the transport domain of the peer
transport protocol that the fast cache entry is running
over.
ObjectIdentifier .1.3.6.1.4.1.9.9.74.1.6.1.1.8
cdeFastS2TAddress
This object contains the transport address of the partner DLSw.
DLSW-MIBTAddress
Textual Convention: DLSW-MIBTAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.74.1.6.1.1.9
cdeFastS2CacheId
The Cache ID assigned to this fast cache entry by the partner
DLSw.
Every Fast cache entry will have a unique id.
A management station could use this object by periodically
polling this table, and determine whether the …
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.9.9.74.1.6.1.1.10
cdeFastOrigin
This object specifies which of the two end stations
initiated the establishment of this circuit.
Enumeration
Enumerated Values:
1s1
2s2
 .1.3.6.1.4.1.9.9.74.1.6.1.1.11
cdeFastTimeToLive
The amount of time (in hundredths of a second) remaining
before this fast cache entry will be removed from the table.
After 5 minutes of inactivity, the fast cache entry will be
deleted.
hundredths of a secondSNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.74.1.6.1.1.12