cdeTConnConfigBackupLinger
CISCO-DLSW-EXT-MIB ·
.1.3.6.1.4.1.9.9.74.1.3.1.1.8
Object
This variable indicates whether the backup peer will remain connected after the primary peer connection has been re-established. True indicates that the backup peer will remain connected after the primary peer connection has been re-established, for the length of time specified in cdeTConnConfigBackupLingerInterval. False indicates that the backup peer will remain connected until all circuits on the backup peer connection have been disconnected.
Context
- MIB
- CISCO-DLSW-EXT-MIB
- OID
.1.3.6.1.4.1.9.9.74.1.3.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cdeTConnConfigEntry
- Table
- cdeTConnConfigTable
- Siblings
- 13
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cdeTConnConfigTDomainType The type of DLSw encapsulation in use on this peer connection. | column | TDomainType | .1.3.6.1.4.1.9.9.74.1.3.1.1.1 |
| cdeTConnConfigPriority Indicator of whether this peer connection supports priority.
When priority is configured for the remote peer,
DLSw+ will automatically activate four TCP connections to that
remote… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.74.1.3.1.1.10 |
| cdeTConnConfigDestMac Permits the peer connection to be established only when there is an
explorer frame destined for the specified 48-bit MAC address.
If no expolorer traffic with a des… | column | DLSW-MIBMacAddressNC | .1.3.6.1.4.1.9.9.74.1.3.1.1.11 |
| cdeTConnConfigDynamic Indicates the peer connection is to be established only
when there is DLSw+ data to send. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.74.1.3.1.1.12 |
| cdeTConnConfigDynamicNoLlc This variable indicates the length of time a dynamic peer
remains connected after all LLC2 circuits are gone. | column | Minutes Integer32 | .1.3.6.1.4.1.9.9.74.1.3.1.1.13 |
| cdeTConnConfigDynamicInactivityInterval Indicates the length of time a connection can be idle before
closing the dynamic peer connection. If set to zero, the dynamic
peer connection will not be closed due to inactivit… | column | Minutes Integer32 | .1.3.6.1.4.1.9.9.74.1.3.1.1.14 |
| cdeTConnConfigLocalAck Reflects whether the peer connection is locally acknowledged.
Locally acknoledgement means terminating the DLC connections
at the router, eliminating the requirement for link-laye… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.74.1.3.1.1.2 |
| cdeTConnConfigCost The cost associated with the transport connection,
assigned to this conceptual row representing a peer.
If an end station can be reached through more
than one peer, the cost of ea… | column | Cost | .1.3.6.1.4.1.9.9.74.1.3.1.1.3 |
| cdeTConnConfigLFSize The Largest Frame Size associated with the transport connection.
In other words its the largest size of the INFO field
(including DLC header, not including any MAC-level or framin… | column | DLSW-MIBLFSize | .1.3.6.1.4.1.9.9.74.1.3.1.1.4 |
| cdeTConnConfigKeepaliveInterval The amount of time between keepalive messages on a transport
connection.
The keepalive parameter refers to how often DLSw peers
send peer keep alives to each other. These periodi… | column | Seconds KeepaliveInterval | .1.3.6.1.4.1.9.9.74.1.3.1.1.5 |
| cdeTConnConfigBackup This variable indicates if this peer is defined
as a backup to an existing peer. A backup peer is used
to provide an alternate path in case an existing peer becomes
unavailable. … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.74.1.3.1.1.6 |
| cdeTConnConfigBackupTAddr The primary peer's IP address that this entry backs up.
Valid only when ciscoDlswTConnConfigBackup is true. | column | DLSW-MIBTAddress | .1.3.6.1.4.1.9.9.74.1.3.1.1.7 |
| cdeTConnConfigBackupLingerInterval This variable indicates the length of time the backup peer
remains connected after the primary peer connection has
been re-established. If this variable is zero, the backup peer
… | column | Minutes Integer32 | .1.3.6.1.4.1.9.9.74.1.3.1.1.9 |