CIENA-CES-BENCHMARK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
18
Rows
18
Columns
243

cienaCesBenchmarkEntityTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.2 · 1 row entry · 24 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkEntityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkEntityTable' 
Table of benchmark entity entries.
cienaCesBenchmarkEntityEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.2.1
BENCHMARK Entity characteristics.
Indexes
Column Syntax OID
cienaCesBenchmarkEntityEntryId
Entity unique ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.1
cienaCesBenchmarkEntityEntryName
Name of the benchmark entity as entered when created.
OctetStringr/w
Constraints:
range: 1-46
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.2
cienaCesBenchmarkEntityEntryRole
Entity role
Enumerationr/w
Enumerated Values:
1none
2reflector
3generator
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.3
cienaCesBenchmarkEntityEntryPortId
Entity port under test
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.4
cienaCesBenchmarkEntityEntryMode
Entity mode
Enumerationr/w
Enumerated Values:
1none
2inService
3outOfService
4vidOutOfService
5evcOutOfService
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.5
cienaCesBenchmarkEntityEntryAdminState
Entity admin state.
CienaCesBenchmarkAdminStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.6
cienaCesBenchmarkEntityEntryLocalMac
The FPGA internal test port assigned mac address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.7
cienaCesBenchmarkEntityEntrySlotId
The slot Id of the line module associated
with this entity.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.8
cienaCesBenchmarkEntityEntryReflectorVendorType
Indicator as to what type of equipment is generating the
test traffic on the remote end.
Enumerationr/w
Enumerated Values:
1other
2ciena
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.9
cienaCesBenchmarkEntityEntryReflectionLevel
For reflector entities, this indicates the minimum reflection
level required. If test traffic is going over an ethernet L2
cloud, l2-only is fine. But if the test traffic is going over
an IP network, the reflector needs…
Enumerationr/w
Enumerated Values:
1none
2l2only
3l2ToL3IPv4only
4l2ToL3IPv6only
5l2ToL4IPv4only
6l2ToL4IPv6only
7l2ToL4
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.10
cienaCesBenchmarkEntityEntryGeneratorHFrameSize
Maximum frame size that should be generated by the generator
device. This H frame size should to leave enough room for
extra encapsulation bytes that will be pushed onto the
packet by the switch when pushing this test …
Integer32r/w
Constraints:
range: 64-9216
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.11
cienaCesBenchmarkEntityEntryMaxConfigTestInstances
Maximum number of test instances that can
be configured on this entity.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.12
cienaCesBenchmarkEntityEntryMaxSimultaneousTestInstances
Maximum number of test instances that can
be enabled (reflector) or running (generator)
on this entity, given the availability of
hw sessions.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.13
cienaCesBenchmarkEntityEntryOperEnabled
Entity operational enable/disable. An entity
is operationally enabled when the feature is
enabled, the entity is enabled and at least one
test instance associated with that entity is
enabled (reflector) or running (gen…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.14
cienaCesBenchmarkEntityEntryNumTestInstancesConfigured
Number of test instances currently configured
on this entity.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.15
cienaCesBenchmarkEntityEntryNumTestInstancesEnabled
Number of test instances currently enabled.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.16
cienaCesBenchmarkEntityEntryGenNumTestInstancesRunning
Number of test instances currently running.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.17
cienaCesBenchmarkEntityEntryBwAvailable
Bandwidth available for test traffic if
a reflector. Bandwidth remaining for other
test instances to be started if a generator.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.18
cienaCesBenchmarkEntityEntryGenBwUsedByRunningTests
Bandwidth currently used by test instances
currently running, in Mbps.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.19
cienaCesBenchmarkEntityEntryAvailableHwSessions
Maximum number of simultaneous hardware sessions available
on this platform.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.20
cienaCesBenchmarkEntityEntryAllocatedHwSessions
The number of allocated hardware sessions
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.21
cienaCesBenchmarkEntityEntryRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table. To create a row in
this table, set this object to 'createAndGo'.
To delete a row in this table, set this object to
'destroy'. If the entry…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.22
cienaCesBenchmarkEntityEntryClearStats
Set to true to clear all global fpga counters for the given entity.
Clear is only allowed for a reflector if no test instances are
enabled, and for a generator if no test instances are running. The
value is reset to fal…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.23
cienaCesBenchmarkEntityEntryReflectorMacValidation
This attribute is only valid for the reflector entity and indicates
whether the reflector verifies that the destination MAC of the test
frames matches the MAC address associated with benchamrk reflector
entity. MAC Val…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.24

cienaCesBenchmarkEntityStatsTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.3 · 1 row entry · 49 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkEntityStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkEntityStatsTable' 
Table of benchmark entity statistics entries.
cienaCesBenchmarkEntityStatsEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.3.1
BENCHMARK Entity characteristics.
Indexes
Column Syntax OID
cienaCesBenchmarkEntityStatsEntryClearobsolete
Set to true to clear all port and/or global fpga
counters for the given entity. Clear is only allowed
for a reflector if no test instances are enabled, and
for a generator if no test instances are running.
The value is …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.1
cienaCesBenchmarkEntityStatsEntryPortTxBytes
Number of bytes transmitted by the benchmark port
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.2
cienaCesBenchmarkEntityStatsEntryPortTxPkts
Number of packets transmitted by the benchmark port
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.3
cienaCesBenchmarkEntityStatsEntryPortTxCrcErrorPkts
Number of packets with CRC errors
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.4
cienaCesBenchmarkEntityStatsEntryPortTxUcastPkts
Number of unicast packets transmitted by the benchmark port
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.5
cienaCesBenchmarkEntityStatsEntryPortTxMcastPkts
Number of multicast packets transmitted by the benchmark port
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.6
cienaCesBenchmarkEntityStatsEntryPortTxBcastPkts
Number of broadcast packets transmitted by the benchmark port
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.7
cienaCesBenchmarkEntityStatsEntryPortRxUndersizePkts
The total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.8
cienaCesBenchmarkEntityStatsEntryPortRxOversizePkts
The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets) and were otherwise
well formed.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.9
cienaCesBenchmarkEntityStatsEntryPortRxFragmentsPkts
The total number of packets received that were less
than 64 octets in length (excluding framing bits but
including FCS octets) and had either a bad Frame
Check Sequence (FCS) with an integral number of
octets (FCS Error…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.10
cienaCesBenchmarkEntityStatsEntryPortRxJabbersPkts
The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.11
cienaCesBenchmarkEntityStatsEntryPortTxPausePkts
The transmit pause packets for the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.12
cienaCesBenchmarkEntityStatsEntryPortTxDropPkts
The total number of dropped packets on the benchmark port when
traffic profiles are enabled (311v only).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.13
cienaCesBenchmarkEntityStatsEntryPortTxDiscardPkts
The total number of discarded packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.14
cienaCesBenchmarkEntityStatsEntryPortTxLOutRangePkts
The transmit length out of range packet count.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.15
cienaCesBenchmarkEntityStatsEntryPortTx64OctsPkts
Number of 64-byte packets transmitted on the benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.16
cienaCesBenchmarkEntityStatsEntryPortTx65To127Pkts
Number of 64 to 127-byte packets transmitted on the
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.17
cienaCesBenchmarkEntityStatsEntryPortTx128To255Pkts
Number of 128 to 255-byte packets transmitted on the
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.18
cienaCesBenchmarkEntityStatsEntryPortTx256To511Pkts
Number of 256 to 511-byte packets transmitted on the
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.19
cienaCesBenchmarkEntityStatsEntryPortTx512To1023Pkts
Number of 512 to 1023-byte packets transmitted on the
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.20
cienaCesBenchmarkEntityStatsEntryPortTx1024To1518Pkts
Number of 1024 to 1518-byte packets transmitted on the
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.21
cienaCesBenchmarkEntityStatsEntryPortTx1519To2047Pkts
Number of 1519 to 2047-byte packets transmitted on the
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.22
cienaCesBenchmarkEntityStatsEntryPortTx2048To4095Pkts
Number of 2048 to 4095-byte packets transmitted on the
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.23
cienaCesBenchmarkEntityStatsEntryPortTx4096To9216Pkts
Number of 4096 to 9216-byte packets transmitted on the
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.24
cienaCesBenchmarkEntityStatsEntryPortRxBytes
Number of bytes received on the benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.25
cienaCesBenchmarkEntityStatsEntryPortRxPkts
Number of packets received on the benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.26
cienaCesBenchmarkEntityStatsEntryPortRxExDeferPkts
Number of excessive deferred packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.27
cienaCesBenchmarkEntityStatsEntryPortRxDeferPkts
Number of deferred packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.28
cienaCesBenchmarkEntityStatsEntryPortRxGiantPkts
Number of too big packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.29
cienaCesBenchmarkEntityStatsEntryPortRxUnderRunPkts
Underrun packet count for the benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.30
cienaCesBenchmarkEntityStatsEntryPortRxCrcErrorPkts
Number of packets received with CRC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.31
cienaCesBenchmarkEntityStatsEntryPortRxLCheckErrorPkts
Number of packets with length check errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.32
cienaCesBenchmarkEntityStatsEntryPortRxLOutRangePkts
The number of frames received by the benchmark port
that exceeded the maximum permitted frame size.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.33
cienaCesBenchmarkEntityStatsEntryPortRxPausePkts
The total receive pause packets for the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.34
cienaCesBenchmarkEntityStatsEntryPortRxUcastPkts
The total number of unicast packets received by benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.35
cienaCesBenchmarkEntityStatsEntryPortRxMcastPkts
The total number of multicast packets received by benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.36
cienaCesBenchmarkEntityStatsEntryPortRxBcastPkts
The total number of broadcast packets received by benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.37
cienaCesBenchmarkEntityStatsEntryPortRx64OctsPkts
The total number of 64-byte packets received by benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.38
cienaCesBenchmarkEntityStatsEntryPortRx65To127Pkts
The total number of 65 to 127-byte packets received by
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.39
cienaCesBenchmarkEntityStatsEntryPortRx128To255Pkts
The total number of 128 to 255-byte packets received by
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.40
cienaCesBenchmarkEntityStatsEntryPortRx256To511Pkts
The total number of 256 to 511-byte packets received by
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.41
cienaCesBenchmarkEntityStatsEntryPortRx512To1023Pkts
The total number of 512 to 1023-byte packets received by
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.42
cienaCesBenchmarkEntityStatsEntryPortRx1024To1518Pkts
The total number of 1024 to 1518-byte packets received by
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.43
cienaCesBenchmarkEntityStatsEntryPortRx1519To2047Pkts
The total number of 1519 to 2047-byte packets received by
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.44
cienaCesBenchmarkEntityStatsEntryPortRx2048To4095Pkts
The total number of 2048 to 4095-byte packets received by
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.45
cienaCesBenchmarkEntityStatsEntryPortRx4096To9216Pkts
The total number of 4096 to 9216-byte packets received by
benchmark port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.46
cienaCesBenchmarkEntityStatsEntryFpgaMissClassPkts
Test packets received that didn't match any enabled
test session.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.47
cienaCesBenchmarkEntityStatsEntryFpgaCrcErrPkts
Test packets received with CRC errors
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.48
cienaCesBenchmarkEntityStatsEntryFpgaUdpChkSumErrPkts
Test packets received with UDP checksum errors
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.49

cienaCesBenchmarkEmixSequenceTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkEmixSequenceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkEmixSequenceTable' 
Table providing the list of configured EMIX sequences
on this node.
cienaCesBenchmarkEmixSequenceEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.4.1
EMIX sequence entry.
Indexes
Column Syntax OID
cienaCesBenchmarkEmixSequenceId
Unique Id of the EMIX sequence entry
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.1271.2.1.39.1.1.4.1.1
cienaCesBenchmarkEmixSequenceName
Name of this EMIX sequence
OctetStringr/w
Constraints:
range: 1-46
 .1.3.6.1.4.1.1271.2.1.39.1.1.4.1.2
cienaCesBenchmarkEmixSequence
EMIX sequence which is a sequence of up to
16 letters from the following set, that can
be repeated, where each letter is associated with
the frame size below it:
a b c d e f g h u v w …
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.1271.2.1.39.1.1.4.1.3
cienaCesBenchmarkEmixSequenceUFrameSize
The frame size associated with the u letter
in the given sequence. The default value is
594.
Integer32r/w
Constraints:
range: 64-9216
 .1.3.6.1.4.1.1271.2.1.39.1.1.4.1.4
cienaCesBenchmarkEmixSequenceNumOfRef
Number of generator test profiles currently
using this EMIX sequence for testing.
If this is the default EMIX sequence
set in the generator, that also count
as one reference.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.4.1.5
cienaCesBenchmarkEmixSequenceUserCreated
Flag indicating whether this sequence was
created by the user or by the system at
initialization. Only user created sequences
are editable.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.4.1.6
cienaCesBenchmarkEmixSequenceRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table. To create a row in
this table, set this object to 'createAndGo'.
To delete a row in this table, set this object to
'destroy'. If the entry…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.39.1.1.4.1.7

cienaCesBenchmarkEmixFrameSizeTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.5 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkEmixFrameSizeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkEmixFrameSizeTable' 
Table providing the list of frame sizes associated
with the specified EMIX sequence Id.
cienaCesBenchmarkEmixFrameSizeEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.5.1
Frame size associated with given EMIX
sequence ID and frame size index on a given Entity
Indexes
Column Syntax OID
cienaCesBenchmarkEmixFrameSizeIndex
Index of frame size in array of frame sizes
for the given EMIX sequence.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.1271.2.1.39.1.1.5.1.1
cienaCesBenchmarkEmixFrameSizeEntryFrameSize
Frame size associated with the letter at the
position given by cienaCesBenchmarkEmixFrameSizeIndex
in the EMIX sequence with Id
cienaCesBenchmarkEmixSequenceId.
Integer32
Constraints:
range: 64-9216
 .1.3.6.1.4.1.1271.2.1.39.1.1.5.1.2

cienaCesBenchmarkEmixAvgFrameSizeTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.6 · 1 row entry · 1 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkEmixAvgFrameSizeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkEmixAvgFrameSizeTable' 
Table providing the average frame size associated
with the specified EMIX sequence Id on a given Entity.
cienaCesBenchmarkEmixAvgFrameSizeEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.6.1
Average frame size associated with given EMIX
sequence ID and Entity. Only valid for Generator
entities.
Indexes
Column Syntax OID
cienaCesBenchmarkEmixAvgFrameSize
Average frame size for the EMIX sequence with
Id cienaCesBenchmarkEmixSequenceId on the
generator entity with Id cienaCesBenchmarkEntityEntryId.
Integer32
Constraints:
range: 64-9216
 .1.3.6.1.4.1.1271.2.1.39.1.1.6.1.1

cienaCesBenchmarkKpiProfileTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.7 · 1 row entry · 4 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkKpiProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkKpiProfileTable' 
Table providing the list of configured Key Performance
Indicator profiles on this node.
cienaCesBenchmarkKpiProfileEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.7.1
Hw session allocation entry.
Indexes
Column Syntax OID
cienaCesBenchmarkKpiProfileId
Unique Id of the KPI profile entry
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.1271.2.1.39.1.1.7.1.1
cienaCesBenchmarkKpiProfileName
Name of a the KPI profile
OctetStringr/w
Constraints:
range: 1-46
 .1.3.6.1.4.1.1271.2.1.39.1.1.7.1.2
cienaCesBenchmarkKpiProfileNumOfRef
Number of generator test profiles currently
using this KPI profile for results analysis.
If this is the default KPI profile set in
the generator, that also count as one reference.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.7.1.3
cienaCesBenchmarkKpiProfileRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table. To create a row in
this table, set this object to 'createAndGo'.
To delete a row in this table, set this object to
'destroy'. If the ent…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.39.1.1.7.1.4

cienaCesBenchmarkKpiPcpColorTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.8 · 1 row entry · 8 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkKpiPcpColorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkKpiPcpColorTable' 
Table providing the list of configured Key Performance
Indicator per KPI profile, per PCP and per Color.
cienaCesBenchmarkKpiPcpColorEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.8.1
Entry for the KPI values for the given KPI profile,
PCP and color.
Indexes
Column Syntax OID
cienaCesBenchmarkKpiPcpIndex
Index for the PCP
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.1
cienaCesBenchmarkKpiColorIndex
Index for the PCP
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.2
cienaCesBenchmarkKpiPcp
PCP value associated with this entry
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.3
cienaCesBenchmarkKpiColor
Traffic color, green or yellow, associated with these
KPIs.
CienaCesBenchmarkColorTest
Type Values:
1green
2yellow
3greenYellow
4greenYellowRed
 .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.4
cienaCesBenchmarkKpiThroughput
Throughput KPI for the given KPI profile, PCP and color
expressed in percent of bandwidth * 10000 to provide a 4
decimal point value.
CienaCesBenchmarkThroughputKpiPercentr/w .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.5
cienaCesBenchmarkKpiFrameloss
Frameloss KPI for the given KPI profile, PCP and color
expressed in percent of bandwidth * 10000 to provide a 4
decimal point value.
CienaCesBenchmarkFramelossKpiPercentr/w .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.6
cienaCesBenchmarkKpiLatency
Maximum latency in micro-seconds that the latency result
should not exceed in order for the test to be considered
a pass.
microsecondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.7
cienaCesBenchmarkKpiPdv
Maximum PDV in micro-seconds that the PDV test result
should not exceed in order for the test to be
considered a pass.
microsecondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.8

cienaCesBenchmarkBwAllocProfileTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.9 · 1 row entry · 4 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkBwAllocProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkBwAllocProfileTable' 
Table providing the list of configured bandwidth
allocation profiles on this node.
cienaCesBenchmarkBwAllocProfileEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.9.1
BW allocation profile entry
Indexes
Column Syntax OID
cienaCesBenchmarkBwAllocProfileId
Unique Id of the bandwidth allocation
profile entry
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.1271.2.1.39.1.1.9.1.1
cienaCesBenchmarkBwAllocProfileName
Name of a the bandwidth allocation
profile
OctetStringr/w
Constraints:
range: 1-46
 .1.3.6.1.4.1.1271.2.1.39.1.1.9.1.2
cienaCesBenchmarkBwAllocProfileNumOfRef
Number of generator test profiles currently
using this bandwidth allocation profile
for testing.
If this is the default BW allocation
profile set in the generator, that also count
as one reference.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.9.1.3
cienaCesBenchmarkBwAllocProfileRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table. To create a row in
this table, set this object to 'createAndGo'.
To delete a row in this table, set this object to
'destroy'. If the entry…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.39.1.1.9.1.4

cienaCesBenchmarkBwRatioTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.10 · 1 row entry · 3 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkBwRatioTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkBwRatioTable' 
Table providing the list of configured bandwidth
ratio per profile, per PCP.
cienaCesBenchmarkBwRatioEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.10.1
Entry for bandwidth percent per BW Allocation
profile and PCP
Indexes
Column Syntax OID
cienaCesBenchmarkBwRatioPcpIndex
Index for the PCP
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.1271.2.1.39.1.1.10.1.1
cienaCesBenchmarkBwRatioPcp
PCP value associated with this entry.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.1271.2.1.39.1.1.10.1.2
cienaCesBenchmarkBwRatio
Ratio of test bandwidth to allocate to the
test session with this PCP value.
Integer32r/w
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.1271.2.1.39.1.1.10.1.3

cienaCesBenchmarkProfileTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.11 · 1 row entry · 43 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkProfileTable' 
Table of profile entries.
cienaCesBenchmarkProfileEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.11.1
BENCHMARK Profile characteristics.
Indexes
Column Syntax OID
cienaCesBenchmarkProfileEntryId
Index for BENCHMARK profile records.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.1
cienaCesBenchmarkProfileEntryName
Name of the profile as entered when created.
OctetStringr/w
Constraints:
range: 1-46
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.2
cienaCesBenchmarkProfileEntryBandwidth
Maximum bandwidth to use when generating green test
traffic for the profile.
Integer32r/w
Constraints:
range: 1-10000
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.3
cienaCesBenchmarkProfileEntryExcessBandwidth
Maximum bandwidth to use when generating yellow test
traffic for the profile. When testing for red color,
this bandwidth is multiplied by 1.25
Integer32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.4
cienaCesBenchmarkProfileEntryInterval
Interval between the start of one test group to the start
of the next test group.
Enumerationr/w
Enumerated Values:
1t15min
2t1hr
3t6hr
4tCompletion
5t2hr
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.5
cienaCesBenchmarkProfileEntryDuration
Duration of the testing. The test group is repeated until
the duration ends. When indefinite is set, test group is
run only once to completion
Enumerationr/w
Enumerated Values:
1t15min
2t1hr
3t6hr
4t24hr
5tIndefinite
6tOnce
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.6
cienaCesBenchmarkProfileEntrySetFrameSizeList
Used to replace the existing frame size table with the specified list.
More than one values can be listed and are separated by commas.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.7
cienaCesBenchmarkProfileEntryMaxSearches
For the throughput test, this is the maximum number of
searches to find a transmit rate without drops for a
given frame size.
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.8
cienaCesBenchmarkProfileEntryMaxSamples
For the latency and PDV tests, this is the number of
samples to take in order to determine the min, avg
and max latency and avg PDV.
Integer32r/w
Constraints:
range: 2-20
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.9
cienaCesBenchmarkProfileEntrySamplingInterval
For the latency and PDV tests, this is the interval,
in 100ms, to wait between samples.
Integer32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.10
cienaCesBenchmarkProfileEntryFrameLossStartBw
For the frame loss test, this indicates which bandwidth
value to use as the starting bandwidth; the maximum
bandwidth determined via the throughput test, the
bandwidth parameter configured in the profile, or
the maximum…
Enumerationr/w
Enumerated Values:
1profileBandwidth
2maximumThroughput
3maximumLineRate
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.11
cienaCesBenchmarkProfileEntryVidValidation
Indicates whether VID validation is performed in
the classifier or not on the returning packet. If vid
validation is set to false, PCP and Color validation are
ignored and automatically become false.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.12
cienaCesBenchmarkProfileEntryPcpValidation
Used to indicate whether the PCP value of the
test packet should be used to classifier the reflected
packets or not. When color remarking is used, this should
be set to false. Default is true.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.13
cienaCesBenchmarkProfileEntryColorValidation
Used to indicate whether the color bit of the
test packet should be used to classifier the reflected
packets or not. In color unaware testing, this should
be set to false. Default is true.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.14
cienaCesBenchmarkProfileEntryKpiProfileId
Name of a valid KPI profile, from the
cienaCesBenchmarkKpiProfileTable, to use when
analysing the test results for this profile.
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.15
cienaCesBenchmarkProfileEntryBwAllocProfileId
Id of a valid Bandwidth Allocation profile,
from the cienaCesBenchmarkBwAllocProfileTable,
used for distributing the profile bandwidth amongst
the configured PCP values for this profile when running
tests.
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.16
cienaCesBenchmarkProfileEntryEmixSequenceId
Id of a valid EMIX sequence configured in the
cienaCesBenchmarkEmixSequenceTable, to use when y1564
is selected. The EMIX sequence is used instead of the
frame size list if and only if y1564 is selected.
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.17
cienaCesBenchmarkProfileEntryEncapType
Encapsulation type to use for generated packets.
Enumerationr/w
Enumerated Values:
1untagged
2dot1q
3qinq
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.18
cienaCesBenchmarkProfileEntryPduType
Vlan tag protocol identifier to use for the generated packets.
Enumerationr/w
Enumerated Values:
1ethernet
2ip
3udpecho
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.19
cienaCesBenchmarkProfileEntryDstmac
MAC address to use as the destination MAC address on
the generated packets.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.20
cienaCesBenchmarkProfileEntrySVid
S-VLAN ID to used for generated packets when encapType is set to QinQ
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.21
cienaCesBenchmarkProfileEntrySPcp
Bitmap of the S-VLAN PCP (Priority Code Point) value to
test with. When RFC2544 test is enabled, only one
PCP can be set in the mask. Otherwise, a test session
will be run for each PCP bit set. Used when the encapType…
CienaCesBenchmarkPcpBitmapr/w
Type Values:
0pcp0
1pcp1
2pcp2
3pcp3
4pcp4
5pcp5
6pcp6
7pcp7
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.22
cienaCesBenchmarkProfileEntrySColor
Color of the S-VLAN tag for the test traffic. This is
directly related to the value of the DEI bit
configured in the VLAN tag of the test traffic. Green
traffic will have its DEI bit set to 0 while Yellow
traffic will…
CienaCesBenchmarkColorTestr/w
Type Values:
1green
2yellow
3greenYellow
4greenYellowRed
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.23
cienaCesBenchmarkProfileEntryCVid
C-VLAN ID to used for generated packets when encapType is set to
QinQ or dot1q.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.24
cienaCesBenchmarkProfileEntryCPcp
Bitmap of the C-VLAN PCP (Priority Code Point) value to
test with. When RFC2544 test is enabled, only one
PCP can be set in the mask. Otherwise, a test session
will be run for each PCP bit set. Only used when the
enca…
CienaCesBenchmarkPcpBitmapr/w
Type Values:
0pcp0
1pcp1
2pcp2
3pcp3
4pcp4
5pcp5
6pcp6
7pcp7
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.25
cienaCesBenchmarkProfileEntryCColor
Color of the C-VLAN tag for the test traffic. This is
directly related to the value of the DEI bit
configured in the VLAN tag of the test traffic. Green
traffic will have its DEI bit set to 0 while Yellow
traffic will…
CienaCesBenchmarkColorTestr/w
Type Values:
1green
2yellow
3greenYellow
4greenYellowRed
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.26
cienaCesBenchmarkProfileEntryTpid
Vlan tag protocol identifier to use for the generated packets.
The following TPID values are supported by benchmark:
0x8100
0x9100
0x88A8
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.27
cienaCesBenchmarkProfileEntryDscp
IP DSCP value to use for the generated packets.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.28
cienaCesBenchmarkProfileEntrySrcInetAddrType
Specifies the type of address cienaCesBenchmarkProfileEntrySrcInetAddr belongs to.
When set to:
ipv4 : cienaCesBenchmarkProfileEntrySrcInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 :…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.29
cienaCesBenchmarkProfileEntrySrcInetAddr
Specifies the unicast source IP address to use in IP test packet.
The InetAddress specified here is compliant with RFC 4001.
The InetAddressType and the InetAddress must be set as part of the same SNMP
SET request.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.30
cienaCesBenchmarkProfileEntryDstInetAddrType
Specifies the type of address cienaCesBenchmarkProfileEntryDstInetAddr belongs to.
When set to:
ipv4 : cienaCesBenchmarkProfileEntryDstInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 :…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.31
cienaCesBenchmarkProfileEntryDstInetAddr
Specifies the unicast destination IP address to use in IP test packet.
The InetAddress specified here is compliant with RFC 4001.
The InetAddressType and the InetAddress must be set as part of the same SNMP
SET request.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.32
cienaCesBenchmarkProfileEntryCustomPayload
Custom payload to be used on the generated packets.
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.33
cienaCesBenchmarkProfileEntryThroughputTest
Run throughput test
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.34
cienaCesBenchmarkProfileEntryFramelossTest
Run frame loss test
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.35
cienaCesBenchmarkProfileEntryLatencyTest
Run latency test
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.36
cienaCesBenchmarkProfileEntryPdvTest
Run packet delay variation test
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.37
cienaCesBenchmarkProfileEntryBurstTest
Run packet burst test
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.38
cienaCesBenchmarkProfileEntryRfc2544Suite
Run RFC2544 test suite which includes throughput, frame
loss and latency tests
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.39
cienaCesBenchmarkProfileEntryY1564Test
The Y1564 test includes the throughput, frameloss,
latency and PDV tests are is run using the configured
EMIX sequence. If the profile's EMIX sequence is
not configured, the default generator EMIX sequence is
used. Y156…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.40
cienaCesBenchmarkProfileEntryHwSessionsRequired
This represents the number of hardware sessions
required to enable/run a test instance using
this profile according to the profile's current
configuration.
One hardware session is required for each outer tag
PCP and c…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.41
cienaCesBenchmarkProfileEntryNumOfRef
Number of generator test instances currently
using this test profile for testing.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.42
cienaCesBenchmarkProfileEntryRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table. To create a row in
this table, set this object to 'createAndGo'.
To delete a row in this table, set this object to
'destroy'. If the ent…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.43

cienaCesBenchmarkTestInstanceTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.12 · 1 row entry · 18 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkTestInstanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkTestInstanceTable' 
Table of test instance entries.
cienaCesBenchmarkTestInstanceEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.12.1
BENCHMARK test instance characteristics.
Indexes
Column Syntax OID
cienaCesBenchmarkTestInstanceEntryId
Unique identifier for the test instance.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.1
cienaCesBenchmarkTestInstanceEntryName
Unique name given to the test instance at creation time.
OctetStringr/w
Constraints:
range: 1-46
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.2
cienaCesBenchmarkTestInstanceEntrySubPortId
ID of the sub-port to base this test instance on. The sub-port has
to be a child of the port under test associated with an existing
entity.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.3
cienaCesBenchmarkTestInstanceEntryProfileId
Id of an existing test profile to be used with the test instance as
the template for testing. A test profile ID has to be specified if
this test instance is associated with a generator entity. If it's a
reflector test i…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.4
cienaCesBenchmarkTestInstanceEntrySvid
S VLAN ID to use for testing.
For generator test instances, this over-writes the value defined in
the referenced test profile if applicable (encap-type set to qinq).
For reflector test instances, this has to be set to …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.5
cienaCesBenchmarkTestInstanceEntryCvid
C VLAN ID to use for testing.
For generator test instances, this over-writes the value defined in the
referenced test profile if applicable (encap-type set to dot1q or qinq).
For reflector test instances, this has to b…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.6
cienaCesBenchmarkTestInstanceEntryUntagged
When set to true, this indicates that the test instance
is to be associated with untagged data traffic. When this
is set, the cvid and svid parameters must be 0.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.7
cienaCesBenchmarkTestInstanceEntryDstMac
Destination MAC address to use for generator test instances. When set,
this over writes the value specified in the referenced test profile.
This field is not applicable for reflector test instances.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.8
cienaCesBenchmarkTestInstanceEntryAdminState
Indicates the administrative state of the test instance. Upon enabling
a test instance, resources are allocated in hardware. For reflector test
instances, this triggers the start of reflection of any test traffic
receiv…
CienaCesBenchmarkAdminStater/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.9
cienaCesBenchmarkTestInstanceEntryStarted
Applicable to generator test instances, this indicates whether testing is
in progress or not. Setting this attribute to true will initiate
testing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.10
cienaCesBenchmarkTestInstanceEntryCurrentInterval
Applicable to generator test instances, this indicates the
number of intervals of the selected tests have been run,
including the current one, in relation to the total number of
intervals to complete. This is based on…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.11
cienaCesBenchmarkTestInstanceEntryTotalIntervals
Applicable to generator test instances, this indicates the
total number of intervals of the selected tests to be run
by a single start command on the test instance. This is
based on the profile's interval and duration…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.12
cienaCesBenchmarkTestInstanceEntryLastIterStart
Date and time of the last iteration that started since the
last time the system was rebooted or the statistics were
cleared on the test instance.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.13
cienaCesBenchmarkTestInstanceEntryClearStats
Set to true to clear the results and counters for the
test instance.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.14
cienaCesBenchmarkTestInstanceEntryRowStatus
Used to manage the creation and deletion of the conceptual rows in this table.
To create a row in this table, set this object to 'createAndGo'.
To delete a row in this table, set this object to 'destroy'.
If the entry e…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.15
cienaCesBenchmarkTestInstanceEntryAssocEntityId
ID of the entity this test instance is associated with
(cienaCesBenchmarkEntityEntryId)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.16
cienaCesBenchmarkTestInstanceEntryOperState
Indicates the operational state of the test instance. When a generator
test instance is operationally enabled it means the test is running and
traffic is being generated. When a reflector test instance is operationall…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.17
cienaCesBenchmarkTestInstanceEntryConnectivityTest
Applicable to generator test instances, this field is used to trigger
a connectivity test on the test instance. Setting the value to true will
trigger the test by transmitting 10 packets. If no error is returned
then…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.18

cienaCesBenchmarkGenTestSessionAllocationTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.13 · 1 row entry · 15 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkGenTestSessionAllocationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkGenTestSessionAllocationTable' 
Table providing the allocation of hw test session per 
generator test instance Id, PCP and color.
cienaCesBenchmarkGenTestSessionAllocationEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.13.1
Test session (aka hardware session) allocation entry.
SPECIAL NOTE: It is important to know that when the associated
test profile's encapsulation type is set to untagged,
the last two elements of the index (PCP and colo…
Indexes
Column Syntax OID
cienaCesBenchmarkGenTestSessionPcpIndex
PCP Index.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.1
cienaCesBenchmarkGenTestSessionColorIndex
Color Index.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.2
cienaCesBenchmarkGenTestSessionPcp
PCP value associated with this hw session
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.3
cienaCesBenchmarkGenTestSessionColor
Color of test traffic associated with this hardware
session
CienaCesBenchmarkColorTest
Type Values:
1green
2yellow
3greenYellow
4greenYellowRed
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.4
cienaCesBenchmarkGenTestSessionId
Id of the hardware session allocated to the given
test instance id, pcp and color
Integer32
Constraints:
range: 0-127
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.5
cienaCesBenchmarkGenTestSessionEmixSequenceId
EMIX sequence Id used with this session. If zero,
it indicates that the the frame size list is being used
for the test and cienaCesBenchmarkGenTestSessionCurrentPktSize
indicates which packet size is currently being te…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.6
cienaCesBenchmarkGenTestSessionCurrentPktSize
Packet size in bytes currently used by the running test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.7
cienaCesBenchmarkGenTestSessionThroughputTestState
State of the throughput test for this hardware session
defined by the test instance id, pcp and color
CienaCesBenchmarkThroughputTestState
Type Values:
1idle
2running
3waitingForResidualPackets
4processingResults
5stoppedByIntervalTimer
6stoppedByDurationTimer
7stoppedByUser
8done
9txMaxThroughputForYellowTest
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.8
cienaCesBenchmarkGenTestSessionFramelossTestState
State of the frameloss test for this hardware session
defined by the test instance id, pcp and color
CienaCesBenchmarkFramelossTestState
Type Values:
1idle
2runningFirstTest
3waitingForResidualFirstPackets
4processingFirstResults
5runningSecondTest
6waitingForResidualSecondPackets
7processingSecondResults
8stoppedByIntervalTimer
9stoppedByDurationTimer
10stoppedByUser
11done
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.9
cienaCesBenchmarkGenTestSessionLatencyTestState
State of the latency test for this hardware session
defined by the test instance id, pcp and color
CienaCesBenchmarkLatencyPdvTestState
Type Values:
1idle
2sendingTraffic
3waitingForTimestampData
4waitingForResidualPackets
5processingResults
6stoppedByIntervalTimer
7stoppedByDurationTimer
8stoppedByUser
9done
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.10
cienaCesBenchmarkGenTestSessionPdvTestState
State of the PDV test for this hardware session
defined by the test instance id, pcp and color
CienaCesBenchmarkLatencyPdvTestState
Type Values:
1idle
2sendingTraffic
3waitingForTimestampData
4waitingForResidualPackets
5processingResults
6stoppedByIntervalTimer
7stoppedByDurationTimer
8stoppedByUser
9done
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.11
cienaCesBenchmarkGenTestSessionRfc2544TestState
State of the RFC2544 test for this hardware session
defined by the test instance id, pcp and color
CienaCesBenchmarkRfc2544TestState
Type Values:
1idle
2running
3stoppedByIntervalTimer
4stoppedByDurationTimer
5stoppedByUser
6done
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.12
cienaCesBenchmarkGenTestSessionY1564TestState
State of the Y1564 test for this hardware session
defined by the test instance id, pcp and color
CienaCesBenchmarkY1564TestState
Type Values:
1idle
2running
3stoppedByIntervalTimer
4stoppedByDurationTimer
5stoppedByUser
6done
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.13
cienaCesBenchmarkGenTestSessionCurrentRate
Traffic rate currently used to generate packets as percent
of the line rate
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.14
cienaCesBenchmarkGenTestSessionSamplesCompleted
When latency and/or pdv is running, this indicates how
many samples have been gathered so far.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.15

cienaCesBenchmarkTestInstanceStatsTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.14 · 1 row entry · 15 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkTestInstanceStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkTestInstanceStatsTable' 
Table of test instance packet statistics entries.
cienaCesBenchmarkTestInstanceStatsEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.14.1
Benchmark test instance packet statistics
Indexes
Column Syntax OID
cienaCesBenchmarkTestInstanceStatsRxPkts
Total number of received packets for
this test instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.1
cienaCesBenchmarkTestInstanceStatsRxIpv4Pkts
Total number of IPv4 packets received for
this test instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.2
cienaCesBenchmarkTestInstanceStatsRxIpv4UdpPkts
Total number of IPv4 UDP packets received for
this test instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.3
cienaCesBenchmarkTestInstanceStatsRxIpv6Pkts
Total number of IPv6 packets received for
this test instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.4
cienaCesBenchmarkTestInstanceStatsRxIpv6UdpPkts
Total number of IPv6 UDP packets received for
this test instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.5
cienaCesBenchmarkTestInstanceStatsRxNonIpPkts
Total number of non-IP packets received for
this test instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.6
cienaCesBenchmarkTestInstanceStatsRxUnrecognizedPkts
Total number of unrecognized packets received for
this test instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.7
cienaCesBenchmarkTestInstanceStatsRxDuplicatePkts
Total number of packets received with a duplicate
this test instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.8
cienaCesBenchmarkTestInstanceStatsRxDuplicatePktsOverflow
When set to true, this indicates that the duplicate
pkt counter has rolled over in hardware and therefore,
cienaCesBenchmarkTestInstanceStatsRxDuplicatePkts might
not be accurate.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.9
cienaCesBenchmarkTestInstanceStatsRxOOOPkts
Total number of packets received with an out of
order sequence number. The sequence number was less
than the expected sequence number for this test instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.10
cienaCesBenchmarkTestInstanceStatsRxOOOPktsOverflow
When set to true, this indicates that the out of order
pkt counter has rolled over in hardware and therefore,
cienaCesBenchmarkTestInstanceStatsRxOOOPkts might
not be accurate.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.11
cienaCesBenchmarkTestInstanceStatsRxDiscSeqNumPkts
Total number of packets received with a sequence number
greater then the expected sequence number for this test instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.12
cienaCesBenchmarkTestInstanceStatsRxDiscSeqNumPktsOverflow
When set to true, this indicates that the discontinuity
in sequence number pkt counter has rolled over in hardware
and therefore, cienaCesBenchmarkTestInstanceStatsRxDiscSeqNumPkts
might not be accurate.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.13
cienaCesBenchmarkTestInstanceStatsRxUdpCheckSumPkts
Total number of UDP packets received with a UDP checksum
error.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.14
cienaCesBenchmarkTestInstanceStatsTxPkts
Total number of packets transmitted for this test instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.15

cienaCesBenchmarkGenTestSessionThroughputResultsTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.15 · 1 row entry · 12 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkGenTestSessionThroughputResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkGenTestSessionThroughputResultsTable' 
Table of BENCHMARK generator test session throughput results in Mbps.
cienaCesBenchmarkGenTestSessionThroughputResultsEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.15.1
BENCHMARK generator test session throughput results.
Indexes
Column Syntax OID
cienaCesBenchmarkGenTestSessionThroughputResultsPcpIndex
Index of the PCP value
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.1
cienaCesBenchmarkGenTestSessionThroughputResultsColorIndex
Color index.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.2
cienaCesBenchmarkGenTestSessionThroughputResultsFrameSizeIndex
Frame size index for which those throughput results are
for. When EMIX is used, in which case
cienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceId is
not NULL, there is only one frame size index for
the given…
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.3
cienaCesBenchmarkGenTestSessionThroughputResultsPcp
PCP value of the test packets associated with those
results.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.4
cienaCesBenchmarkGenTestSessionThroughputResultsColor
Color of the test packets associated with those
results.
CienaCesBenchmarkColorTest
Type Values:
1green
2yellow
3greenYellow
4greenYellowRed
 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.5
cienaCesBenchmarkGenTestSessionThroughputResultsFrameSize
Packet size in bytes. If 0, then the
cienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceId
indicates the ID of the EMIX sequence used for the test
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.6
cienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceId
ID of the EMIX sequence that was used for running the
test which produced these results. When 0,
frame size indicates the size of the test frame
associated with these results.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.7
cienaCesBenchmarkGenTestSessionThroughputResultsMin
Minimum throughput recorded for the given packet size
in Mbps * 100. The value is multiplied by 100 to be able
to send the results as an integer but should be divided
by 100 when displayed to provide a 2 decimal point …
CienaCesBenchmarkThroughputResult .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.8
cienaCesBenchmarkGenTestSessionThroughputResultsMax
Maximum throughput recorded for the given packet size
in Mbps * 100. The value is multiplied by 100 to be able
to send the results as an integer but should be divided
by 100 when displayed to provide a 2 decimal point a…
CienaCesBenchmarkThroughputResult .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.9
cienaCesBenchmarkGenTestSessionThroughputResultsAvg
Average throughput recorded for the given packet size
in Mbps * 100. The value is multiplied by 100 to be able
to send the results as an integer but should be divided
by 100 when displayed to provide a 2 decimal point a…
CienaCesBenchmarkThroughputResult .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.10
cienaCesBenchmarkGenTestSessionThroughputResultsIterations
Number of times the test has been run for this packet size.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.11
cienaCesBenchmarkGenTestSessionThroughputResultsKpiResult
Pass or fail results for the test which is determined
by comparing the max throughput against the selected
KPI test instance's throughput pass criteria. If no KPI test instance
is selected for the given test instance I…
CienaCesBenchmarkKpiResult
Type Values:
1notAvailable
2pass
3fail
 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.12

cienaCesBenchmarkGenTestSessionFramelossResultsTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.16 · 1 row entry · 13 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkGenTestSessionFramelossResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkGenTestSessionFramelossResultsTable' 
Table of BENCHMARK generator test session frameloss results.
cienaCesBenchmarkGenTestSessionFramelossResultsEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.16.1
BENCHMARK generator test session frameloss results.
Indexes
Column Syntax OID
cienaCesBenchmarkGenTestSessionFramelossResultsPcpIndex
PCP index.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.1
cienaCesBenchmarkGenTestSessionFramelossResultsColorIndex
Color index.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.2
cienaCesBenchmarkGenTestSessionFramelossResultsFrameSizeIndex
Frame size index.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.3
cienaCesBenchmarkGenTestSessionFramelossResultsRateIndex
Rate index.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.4
cienaCesBenchmarkGenTestSessionFramelossResultsPcp
PCP value of the test packets associated with those
results.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.5
cienaCesBenchmarkGenTestSessionFramelossResultsColor
Color of the test packets associated with those
results.
CienaCesBenchmarkColorTest
Type Values:
1green
2yellow
3greenYellow
4greenYellowRed
 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.6
cienaCesBenchmarkGenTestSessionFramelossResultsFrameSize
Packet size in bytes. If 0, then the
cienaCesBenchmarkGenTestSessionFramelossResultsEmixSequenceId
indicates the ID of the EMIX sequence used for the test
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.7
cienaCesBenchmarkGenTestSessionFramelossResultsEmixSequenceId
ID of the EMIX sequence that was used for running the
test which produced these results. When 0,
frame size indicates the size of the test frame
associated with these results.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.8
cienaCesBenchmarkGenTestSessionFramelossResultsRate
Rate in percent of line rate.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.9
cienaCesBenchmarkGenTestSessionFramelossResultsFirst
Percentage of frames lost on first test sequence.
CienaCesBenchmarkFramelossResult .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.10
cienaCesBenchmarkGenTestSessionFramelossResultsSecond
Percentage of frames lost on second test sequence.
CienaCesBenchmarkFramelossResult .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.11
cienaCesBenchmarkGenTestSessionFramelossResultsKpiResult
Pass or fail results for the test which is determined
by comparing the frameloss result against the selected
KPI test instance's frameloss pass criteria. If no KPI test instance
is selected for the given test instance …
CienaCesBenchmarkKpiResult
Type Values:
1notAvailable
2pass
3fail
 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.12
cienaCesBenchmarkGenTestSessionFramelossResultsResult
Percentage of frames lost on the largest test sequence results.
CienaCesBenchmarkFramelossResult .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.13

cienaCesBenchmarkGenTestSessionLatencyResultsTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.17 · 1 row entry · 12 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkGenTestSessionLatencyResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkGenTestSessionLatencyResultsTable' 
Table of BENCHMARK generator test session latency results in usec.
cienaCesBenchmarkGenTestSessionLatencyResultsEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.17.1
BENCHMARK generator test session latency results.
Indexes
Column Syntax OID
cienaCesBenchmarkGenTestSessionLatencyResultsPcpIndex
PCP index.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.1
cienaCesBenchmarkGenTestSessionLatencyResultsColorIndex
Color index.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.2
cienaCesBenchmarkGenTestSessionLatencyResultsFrameSizeIndex
Frame size index.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.3
cienaCesBenchmarkGenTestSessionLatencyResultsPcp
PCP value of the test packets associated with those
results.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.4
cienaCesBenchmarkGenTestSessionLatencyResultsColor
Color of the test packets associated with those
results.
CienaCesBenchmarkColorTest
Type Values:
1green
2yellow
3greenYellow
4greenYellowRed
 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.5
cienaCesBenchmarkGenTestSessionLatencyResultsFrameSize
Packet size in bytes.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.6
cienaCesBenchmarkGenTestSessionLatencyResultsEmixSequenceId
ID of the EMIX sequence that was used for running the
test which produced these results. When 0,
frame size indicates the size of the test frame
associated with these results.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.7
cienaCesBenchmarkGenTestSessionLatencyResultsMin
Minimum latency recorded for the given packet size.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.8
cienaCesBenchmarkGenTestSessionLatencyResultsMax
Maximum latency recorded for the given packet size.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.9
cienaCesBenchmarkGenTestSessionLatencyResultsAvg
Average latency recorded for the given packet size.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.10
cienaCesBenchmarkGenTestSessionLatencyResultsSamples
Number of samples taken during the test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.11
cienaCesBenchmarkGenTestSessionLatencyResultsKpiResult
Pass or fail results for the test which is determined
by comparing the frameloss result against the selected
KPI test instance's latency pass criteria. If no KPI test instance
is selected for the given test instance Id…
CienaCesBenchmarkKpiResult
Type Values:
1notAvailable
2pass
3fail
 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.12

cienaCesBenchmarkGenTestSessionPdvResultsTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.18 · 1 row entry · 10 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkGenTestSessionPdvResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkGenTestSessionPdvResultsTable' 
Table of BENCHMARK generator test session packet delay 
variation results in usec.
cienaCesBenchmarkGenTestSessionPdvResultsEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.18.1
BENCHMARK generator test session packet delay variation results.
Indexes
Column Syntax OID
cienaCesBenchmarkGenTestSessionPdvResultsPcpIndex
PCP index.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.1
cienaCesBenchmarkGenTestSessionPdvResultsColorIndex
Color index.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.2
cienaCesBenchmarkGenTestSessionPdvResultsFrameSizeIndex
Frame size index associated to those PDV stats.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.3
cienaCesBenchmarkGenTestSessionPdvResultsPcp
PCP value of the test packets associated with those
results.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.4
cienaCesBenchmarkGenTestSessionPdvResultsColor
Color of the test packets associated with those
results.
CienaCesBenchmarkColorTest
Type Values:
1green
2yellow
3greenYellow
4greenYellowRed
 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.5
cienaCesBenchmarkGenTestSessionPdvResultsFrameSize
Packet size in bytes.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.6
cienaCesBenchmarkGenTestSessionPdvResultsEmixSequenceId
ID of the EMIX sequence that was used for running the
test which produced these results. When 0,
frame size indicates the size of the test frame
associated with these results.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.7
cienaCesBenchmarkGenTestSessionPdvResultsAvg
Average PDV recorded for the given packet size.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.8
cienaCesBenchmarkGenTestSessionPdvResultsSamples
Number of samples used for the test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.9
cienaCesBenchmarkGenTestSessionPdvResultsKpiResult
Pass or fail results for the test which is determined
by comparing the frameloss result against the selected
KPI test instance's throughput PDV criteria. If no KPI test instance
is selected for the given test instance …
CienaCesBenchmarkKpiResult
Type Values:
1notAvailable
2pass
3fail
 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.10

cienaCesBenchmarkEmixCharacterSetTable

table
.1.3.6.1.4.1.1271.2.1.39.1.1.19 · 1 row entry · 3 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesBenchmarkEmixCharacterSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-BENCHMARK-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkEmixCharacterSetTable' 
Table of BENCHMARK EMIX character set providing the
list of characters that can be used in an EMIX sequence
along with their corresponding frame size.
cienaCesBenchmarkEmixCharacterSetEntry row .1.3.6.1.4.1.1271.2.1.39.1.1.19.1
BENCHMARK EMIX character and its associated frame size.
Indexes
Column Syntax OID
cienaCesBenchmarkEmixCharacterSetEntryIndex
Character index.
Integer32
Constraints:
range: 1-26
 .1.3.6.1.4.1.1271.2.1.39.1.1.19.1.1
cienaCesBenchmarkEmixCharacterSetEntryCharacter
EMIX character that can be used for creating an EMIX sequence.
The character set currently includes: a b c d e f g h u v w x
OctetString
Constraints:
range: 1-1
 .1.3.6.1.4.1.1271.2.1.39.1.1.19.1.2
cienaCesBenchmarkEmixCharacterSetEntryFrameSize
Frame size associated with the character. For h, the frame size
is the port under test's MTU and the u character is a custom
frame size configurable for each EMIX. The u frame size can take
a value of 64 to 10000 and d…
OctetString
Constraints:
range: 1-6
 .1.3.6.1.4.1.1271.2.1.39.1.1.19.1.3