CABH-QOS2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
30
.1.3.6.1.4.1.4491.2.4.8.1.2.1 · 1 row entry · 2 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cabhQos2PsIfAttribTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CABH-QOS2-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CABH-QOS2-MIB::cabhQos2PsIfAttribTable'
This table contains interface attributes. It includes
the number of media access priorities and number of 
queues associated with each PS interface in the
Residential Gateway.
cabhQos2PsIfAttribEntry row .1.3.6.1.4.1.4491.2.4.8.1.2.1.1
Number of media access priorities and number
of queues for each PS interface in the Residential
Gateway. PS does not need to provide support for entries
associated with Aggregated LAN interfaces (ifIndex 255 and
254).…
Indexes
Column Syntax OID
The number of media access priorities supported
by this interface.
Unsigned32
Constraints:
range: 1-8
.1.3.6.1.4.1.4491.2.4.8.1.2.1.1.1
The number of queues associated with this interface.
Unsigned32
Constraints:
range: 1-8
.1.3.6.1.4.1.4491.2.4.8.1.2.1.1.2
.1.3.6.1.4.1.4491.2.4.8.1.3.4 · 1 row entry · 18 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cabhQos2PolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CABH-QOS2-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CABH-QOS2-MIB::cabhQos2PolicyTable'
This table contains the operator and user created
policies for the management of QoS for applications.
PS creates non-persistent entries (of type 'upnp') for
the QoS-aware applications and services discovered 
through UPnP actions in the user part of this table which
could be converted to persistent entries by user (of type
'user' or by cable operator of type 
'operatorForHomeUserOnly).
cabhQos2PolicyEntry row .1.3.6.1.4.1.4491.2.4.8.1.3.4.1
The indices for these entries.
Column Syntax OID
This Index defines the policy creation owner. The entries
of type 'upnp' are dynamically created by the PS for
the applications, services and devices that it discovers
on the LAN with UPnP QoS actions.
Enumeration
Enumerated Values:
1operatorOnly
2homeUser
3operatorForHomeUser
4upnp
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.1
Index for the set of rules related to an
owner index.
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.2
The order in which the policy rules are processed within
An owner.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.3
Vendor domain name from the Vendor
application name URN.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.4
Text description of the application.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.5
The service Provider Service Domain Name from the
service Provider URN.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.6
Text description of the Service.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.7
Domain name from the Port URN.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.8
Well known IP transport port of the application.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.9
The type of InetAddress for cabhQos2PolicySrcIp,
and cabhQos2PolicyDestIp.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.10
The IANA-defined IP protocol number representing
the IP protocol to match against the IPv4 protocol
number or the IPv6 Next- Header number in the packet.
'0' means no protocol is specified as matching criteria
for p…
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.11
The IP address to match against the packet's source IP
address. This may not be a DNS name, but may be an IPv4 or
IPv6 prefix.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.12
The IP address to match against the packet's source IP
address. This may not be a DNS name, but may be an IPv4 or
IPv6 prefix.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.13
The value that the layer-4 source port number in the
packet must have in order to match this policy entry.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.14
The value that the layer-4 destination port number in the
packet must have in order to match this policy entry.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.15
The Traffic priority being assigned to this policy. The
final packet tagging is determined by 802.1D rules with
the priority hierarchy order (highest to lowest priority)
as defined in 802.1D-2004 table G-2:
7, 6, 5, …
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.16
The UPnP relative value to determine the allocation or
reallocation of resources to multiple streams.
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.17
The status of this conceptual row. All writable objects
in this row may be modified at any time. The PS MUST
NOT allow creation of new entry or modification to an
existing active entry such that the resulting entry is a…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4491.2.4.8.1.3.4.1.18
.1.3.6.1.4.1.4491.2.4.8.1.4.1 · 1 row entry · 10 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cabhQos2TrafficClassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CABH-QOS2-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CABH-QOS2-MIB::cabhQos2TrafficClassTable'
This table contains the Classifiers being configured 
in the PS as an intermediate QOS device.
For matching classifiers the PS processes entries 
in a sorted manner, first entries with 
cabhQos2TrafficClassMethod 'static' and then
'dynamic' entries.
cabhQos2TrafficClassEntry row .1.3.6.1.4.1.4491.2.4.8.1.4.1.1
The conceptual row definition of this table.
Only entries with cabhQos2TrafficClassMethod
'static' do persist after PS reboot.
Column Syntax OID
Indicates how this entry have been created.
'static' indicates that the entry has been
provisioned via SNMP or related mechanisms
like a config file.
'upnp' indicates that the entry was created via UPnP
Qos actions.
Enumeration
Enumerated Values:
1static
2upnp
.1.3.6.1.4.1.4491.2.4.8.1.4.1.1.1
The index of this conceptual row entry.
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.4491.2.4.8.1.4.1.1.2
The IANA IP transport protocol designated for this
classifier. '0' means no protocol is specified as
matching criteria.
Unsigned32r/w
Constraints:
range: 0-256
.1.3.6.1.4.1.4491.2.4.8.1.4.1.1.3
The type of InetAddress for cabhQos2TrafficClassSrcIp,
and cabhQos2TrafficClassDestIp.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4491.2.4.8.1.4.1.1.4
The IP address to match against the packet's source IP
address for this classifier. This may not be a DNS name,
but may be an IPv4 or IPv6 prefix.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.4.8.1.4.1.1.5
The IP address to match against the packet's source IP
address fro this classifier. This may not be a DNS name,
but may be an IPv4 or IPv6 prefix.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.4.8.1.4.1.1.6
The value that the layer-4 source port number in the
packet must have in order to match this classifier entry.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.4491.2.4.8.1.4.1.1.7
The value that the layer-4 destination port number in the
packet must have in order to match this classifier entry.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.4491.2.4.8.1.4.1.1.8
The traffic priority assigned to this classifier and used
for the tagging of the packet streams.
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.4491.2.4.8.1.4.1.1.9
The status of this conceptual row. All writable objects
in rows with cabhQosTrafficMethod 'static' may be
modified at any time. An SNMP Set to Entries with
cabhQosTrafficMethod 'upnp' returns an error
'wrongValue'with…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4491.2.4.8.1.4.1.1.10