BINTEC-PIM-MIB Table View

The (conceptual) table listing the router's PIM interfaces.
PIM is enabled on all interfaces listed in this table.

pimInterfaceEntry row .0.54.2.1.1.1

An entry (conceptual row) in the pimInterfaceTable. This
entry is preserved on agent restart.

Indexes

pimInterfaceIfIndex pimInterfaceIPVersion

Column	Syntax	OID
pimInterfaceIfIndex The ifIndex value of this PIM interface.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.54.2.1.1.1.1
pimInterfaceIPVersion The IP version of this PIM interface. A physical interface may be configured in multiple modes concurrently, e.g. IPv4 and IPv6, however the traffic is considered to be logically separate.	INET-ADDRESS-MIBInetVersionr/w Type Values: 0 unknown 1 ipv4 2 ipv6	.0.54.2.1.1.1.2
pimInterfaceAddressType The address type of this PIM interface.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.1.1.3
pimInterfaceAddress The primary IP address of this router on this PIM interface. The InetAddressType is given by the pimInterfaceAddressType object.	INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16	.0.54.2.1.1.1.4
pimInterfaceDR The primary IP address of the Designated Router on this PIM interface. The InetAddressType is given by the pimInterfaceAddressType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.1.1.5
pimInterfaceHelloInterval The frequency at which PIM Hello messages are transmitted on this interface. This object corresponds to the 'Hello_Period' timer value defined in the PIM-SM specification. A value of zero represents an 'infinite' inte…	secondsUnsigned32r/w Constraints: range: 0-18000	.0.54.2.1.1.1.6
pimInterfaceTrigHelloInterval The maximum time before this router sends a triggered PIM Hello message on this interface. This object corresponds to the 'Trigered_Hello_Delay' timer value defined in the PIM-SM specification. A value of zero has no …	secondsUnsigned32r/w Constraints: range: 0-60	.0.54.2.1.1.1.7
pimInterfaceJoinPruneInterval The frequency at which this router sends PIM Join/Prune messages on this PIM interface. This object corresponds to the 't_periodic' timer value defined in the PIM-SM specification. A value of zero represents an 'infin…	secondsUnsigned32r/w Constraints: range: 0-18000	.0.54.2.1.1.1.8
pimInterfaceDFElectionRobustness The minimum number of PIM DF-Election messages that must be lost in order for DF election on this interface to fail.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.0.54.2.1.1.1.9
pimInterfaceHelloHoldtime The value set in the Holdtime field of PIM Hello messages transmitted on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations are recommended to use a holdtime that is 3.5 times the valu…	secondsUnsigned32r/w Constraints: range: 0-65535	.0.54.2.1.1.1.10
pimInterfaceJoinPruneHoldtime The value inserted into the Holdtime field of a PIM Join/Prune message sent on this interface. A value of 65535 represents an 'infinite' holdtime. Implementations are recommended to use a holdtime that is 3.5 times th…	secondsUnsigned32r/w Constraints: range: 0-65535	.0.54.2.1.1.1.11
pimInterfacePropagationDelay The expected propagation delay between PIM routers on this network or link. This router inserts this value into the Propagation_Delay field of the LAN Prune Delay option in the PIM Hello messages sent on …	secondsUnsigned32r/w Constraints: range: 0-32	.0.54.2.1.1.1.12
pimInterfaceOverrideInterval The value this router inserts into the Override_Interval field of the LAN Prune Delay option in the PIM Hello messages it sends on this interface. When overriding a prune, PIM routers pick a random timer …	secondsUnsigned32r/w Constraints: range: 0-65	.0.54.2.1.1.1.13
pimInterfaceGenerationIDValue The value of the Generation ID this router inserted in the last PIM Hello message it sent on this interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.54.2.1.1.1.14
pimInterfaceDRPriority The Designated Router Priority value inserted into the DR Priority option on this interface. Numerically higher values for this object indicate higher priorities.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.0.54.2.1.1.1.15
pimInterfaceLanDelayEnabled Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay option.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.1.1.16
pimInterfaceEffectPropagDelay The Effective Propagation Delay on this interface. This object is always 1 if pimInterfaceLanDelayEnabled is FALSE.	secondsUnsigned32 Constraints: range: 0-32	.0.54.2.1.1.1.17
pimInterfaceEffectOverrideIvl The Effective Override Interval on this interface. This object is always 3 if pimInterfaceLanDelayEnabled is FALSE.	secondsUnsigned32 Constraints: range: 0-65	.0.54.2.1.1.1.18
pimInterfaceSuppressionEnabled Whether join suppression is enabled on this interface. This object is always TRUE if pimInterfaceLanDelayEnabled is FALSE.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.1.1.19
pimInterfaceBidirCapable Evaluates to TRUE if all routers on this interface are using the Bidirectional-PIM Capable option.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.1.1.20
pimInterfaceDRPriorityEnabled Evaluates to TRUE if all routers on this interface are using the DR Priority option.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.1.1.21
pimInterfaceDomainBorder Whether or not this interface is a PIM domain border. This includes acting as a border for PIM Bootstrap Router (BSR) messages, if the BSR mechanism is in use.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.1.1.22
pimInterfaceStatus The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. This status object can be set to active(1) without setting any other columna…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.0.54.2.1.1.1.23
pimInterfaceStubInterface Whether this interface is a 'stub interface'. If this object is set to TRUE, then no PIM packets are sent out this interface, and any received PIM packets are ignored. Setting this object to TRUE is a se…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.1.1.24
pimInterfacePruneLimitInterval The minimum interval that must transpire between two successive Prunes sent by a router. This object corresponds to the 't_limit' timer value defined in the PIM-DM specification. This object is used only by PIM-DM.	secondsUnsigned32r/w Constraints: range: 0-65535	.0.54.2.1.1.1.25
pimInterfaceGraftRetryInterval The minimum interval that must transpire between two successive Grafts sent by a router. This object corresponds to the 'Graft_Retry_Period' timer value defined in the PIM-DM specification. This object is used only by…	secondsUnsigned32r/w Constraints: range: 0-65535	.0.54.2.1.1.1.26
pimInterfaceSRPriorityEnabled Evaluates to TRUE if all routers on this interface are using the State Refresh option. This object is used only by PIM-DM.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.1.1.27
pimInterfaceRP The primary IP address of the Rendezvous Point on this PIM interface. The InetAddressType is given by the pimInterfaceAddressType object.	INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16	.0.54.2.1.1.1.28

The (conceptual) table listing the router's PIM neighbors.

pimNeighborEntry row .0.54.2.1.2.1

An entry (conceptual row) in the pimNeighborTable.

Indexes

pimNeighborIfIndex pimNeighborAddressType pimNeighborAddress

Column	Syntax	OID
pimNeighborIfIndex The value of ifIndex for the interface used to reach this PIM neighbor.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.54.2.1.2.1.1
pimNeighborAddressType The address type of this PIM neighbor.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.2.1.2
pimNeighborAddress The primary IP address of this PIM neighbor. The InetAddressType is given by the pimNeighborAddressType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.2.1.3
pimNeighborUpTime The time since this PIM neighbor (last) became a neighbor of the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.2.1.4
pimNeighborExpiryTime The minimum time remaining before this PIM neighbor will be aged out. The value zero indicates that this PIM neighbor will never be aged out.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.2.1.5
pimNeighborLanPruneDelayPresent Evaluates to TRUE if this neighbor is using the LAN Prune Delay option.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.2.1.6
pimNeighborPropagationDelay The value of the Propagation_Delay field of the LAN Prune Delay option received from this neighbor. This object is always zero if pimNeighborLanPruneDelayPresent is FALSE.	Unsigned32 Constraints: range: 0-32767	.0.54.2.1.2.1.7
pimNeighborOverrideInterval The value of the Override_Interval field of the LAN Prune Delay option received from this neighbor. This object is always zero if pimNeighborLanPruneDelayPresent is FALSE.	Unsigned32 Constraints: range: 0-65535	.0.54.2.1.2.1.8
pimNeighborTBit Whether the T bit was set in the LAN Prune Delay option received from this neighbor. The T bit specifies the ability of the neighbor to disable join suppression. This object is always TRUE if pimNeighborLanPruneDelayP…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.2.1.9
pimNeighborGenerationIDPresent Evaluates to TRUE if this neighbor is using the Generation ID option.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.2.1.10
pimNeighborGenerationIDValue The value of the Generation ID from the last PIM Hello message received from this neighbor. This object is always zero if pimNeighborGenerationIDPresent is FALSE.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.54.2.1.2.1.11
pimNeighborBidirCapable Evaluates to TRUE if this neighbor is using the Bidirectional-PIM Capable option.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.2.1.12
pimNeighborDRPriorityPresent Evaluates to TRUE if this neighbor is using the DR Priority option.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.2.1.13
pimNeighborDRPriority The value of the Designated Router Priority from the last PIM Hello message received from this neighbor. This object is always zero if pimNeighborDRPriorityPresent is FALSE.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.54.2.1.2.1.14
pimNeighborSRCapable Evaluates to TRUE if this neighbor is using the State Refresh Capable option. This object is used only by PIM-DM.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.2.1.15

The (conceptual) table listing the secondary addresses
advertised by each PIM neighbor (on a subset of the rows of
the pimNeighborTable defined above).

pimNbrSecAddressEntry row .0.54.2.1.3.1

An entry (conceptual row) in the pimNbrSecAddressTable.

Indexes

pimNbrSecAddressIfIndex pimNbrSecAddressType pimNbrSecAddressPrimary pimNbrSecAddress

Column	Syntax	OID
pimNbrSecAddressIfIndex The value of ifIndex for the interface used to reach this PIM neighbor.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.54.2.1.3.1.1
pimNbrSecAddressType The address type of this PIM neighbor.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.3.1.2
pimNbrSecAddressPrimary The primary IP address of this PIM neighbor. The InetAddressType is given by the pimNbrSecAddressType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.3.1.3
pimNbrSecAddress The secondary IP address of this PIM neighbor. The InetAddressType is given by the pimNbrSecAddressType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.3.1.4

The (conceptual) table listing the non-interface specific
(*,G) state that PIM has.

pimStarGEntry row .0.54.2.1.4.1

An entry (conceptual row) in the pimStarGTable.

Indexes

pimStarGAddressType pimStarGGrpAddress

Column	Syntax	OID
pimStarGAddressType The address type of this multicast group.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.4.1.1
pimStarGGrpAddress The multicast group address. The InetAddressType is given by the pimStarGAddressType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.4.1.2
pimStarGUpTime The time since this entry was created by the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.4.1.3
pimStarGPimMode Whether this entry represents an ASM (Any Source Multicast, used with PIM-SM) or BIDIR-PIM group.	Enumeration Enumerated Values: 3 asm 4 bidir	.0.54.2.1.4.1.4
pimStarGRPAddressType The address type of the Rendezvous Point (RP), or unknown(0) if the RP address is unknown.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.4.1.5
pimStarGRPAddress The address of the Rendezvous Point (RP) for the group. The InetAddressType is given by the pimStarGRPAddressType.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.4.1.6
pimStarGPimModeOrigin The mechanism by which the PIM mode and RP for the group were learned.	PimGroupMappingOriginType Type Values: 1 fixed 2 configRp 3 configSsm 4 bsr 5 autoRP 6 embedded 7 other	.0.54.2.1.4.1.7
pimStarGRPIsLocal Whether the local router is the RP for the group.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.4.1.8
pimStarGUpstreamJoinState Whether the local router should join the RP tree for the group. This corresponds to the state of the upstream (*,G) state machine in the PIM-SM specification.	Enumeration Enumerated Values: 1 notJoined 2 joined	.0.54.2.1.4.1.9
pimStarGUpstreamJoinTimer The time remaining before the local router next sends a periodic (*,G) Join message on pimStarGRPFIfIndex. This timer is called the (*,G) Upstream Join Timer in the PIM-SM specification. This object is zero if the tim…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.4.1.10
pimStarGUpstreamNeighborType The primary address type of the upstream neighbor, or unknown(0) if the upstream neighbor address is unknown or is not a PIM neighbor.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.4.1.11
pimStarGUpstreamNeighbor The primary address of the neighbor on pimStarGRPFIfIndex that the local router is sending periodic (*,G) Join messages to. The InetAddressType is given by the pimStarGUpstreamNeighborType object. This address is call…	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.4.1.12
pimStarGRPFIfIndex The value of ifIndex for the RPF interface towards the RP, or zero if the RPF interface is unknown.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.0.54.2.1.4.1.13
pimStarGRPFNextHopType The address type of the RPF next hop towards the RP, or unknown(0) if the RPF next hop is unknown.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.4.1.14
pimStarGRPFNextHop The address of the RPF next hop towards the RP. The InetAddressType is given by the pimStarGRPFNextHopType object. This address is called MRIB.next_hop(RP(G)) in the PIM-SM specification.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.4.1.15
pimStarGRPFRouteProtocol The routing mechanism via which the route used to find the RPF interface towards the RP was learned.	IANA-RTPROTO-MIBIANAipRouteProtocol Type Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp 17 dvmrp 18 rpl 19 dhcp 20 ttdp	.0.54.2.1.4.1.16
pimStarGRPFRouteAddress The IP address which when combined with the corresponding value of pimStarGRPFRoutePrefixLength identifies the route used to find the RPF interface towards the RP. The InetAddressType is given by the pimStarGRPFNextHop…	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.4.1.17
pimStarGRPFRoutePrefixLength The prefix length which when combined with the corresponding value of pimStarGRPFRouteAddress identifies the route used to find the RPF interface towards the RP. The InetAddressType is given by the pimStarGRPFNextHopTyp…	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.0.54.2.1.4.1.18
pimStarGRPFRouteMetricPref The metric preference of the route used to find the RPF interface towards the RP.	Unsigned32 Constraints: range: 0-2147483647	.0.54.2.1.4.1.19
pimStarGRPFRouteMetric The routing metric of the route used to find the RPF interface towards the RP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.54.2.1.4.1.20

The (conceptual) table listing the interface-specific (*,G)
state that PIM has.

pimStarGIEntry row .0.54.2.1.5.1

An entry (conceptual row) in the pimStarGITable.

Indexes

pimStarGAddressType pimStarGGrpAddress pimStarGIIfIndex

Column	Syntax	OID
pimStarGIIfIndex The ifIndex of the interface that this entry corresponds to.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.54.2.1.5.1.1
pimStarGIUpTime The time since this entry was created by the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.5.1.2
pimStarGILocalMembership Whether the local router has (*,G) local membership on this interface (resulting from a mechanism such as IGMP or MLD). This corresponds to local_receiver_include(*,G,I) in the PIM-SM specification.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.5.1.3
pimStarGIJoinPruneState The state resulting from (*,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (*,G) state machine in the PIM-SM specification.	Enumeration Enumerated Values: 1 noInfo 2 join 3 prunePending	.0.54.2.1.5.1.4
pimStarGIPrunePendingTimer The time remaining before the local router acts on a (*,G) Prune message received on this interface, during which the router is waiting to see whether another downstream router will override the Prune message. This tim…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.5.1.5
pimStarGIJoinExpiryTimer The time remaining before (*,G) Join state for this interface expires. This timer is called the (*,G) Join Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value of 'FFFFFF…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.5.1.6
pimStarGIAssertState The (*,G) Assert state for this interface. This corresponds to the state of the per-interface (*,G) Assert state machine in the PIM-SM specification. If pimStarGPimMode is 'bidir', this object must be 'noInfo'.	Enumeration Enumerated Values: 1 noInfo 2 iAmAssertWinner 3 iAmAssertLoser	.0.54.2.1.5.1.7
pimStarGIAssertTimer If pimStarGIAssertState is 'iAmAssertWinner', this is the time remaining before the local router next sends a (*,G) Assert message on this interface. If pimStarGIAssertState is 'iAmAssertLoser', this is the time remain…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.5.1.8
pimStarGIAssertWinnerAddressType If pimStarGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0).	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.5.1.9
pimStarGIAssertWinnerAddress If pimStarGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the pimStarGIAssertWinnerAddressType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.5.1.10
pimStarGIAssertWinnerMetricPref If pimStarGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the RP advertised by the assert winner; otherwise, this object is zero.	Unsigned32 Constraints: range: 0-2147483647	.0.54.2.1.5.1.11
pimStarGIAssertWinnerMetric If pimStarGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the RP advertised by the assert winner; otherwise, this object is zero.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.54.2.1.5.1.12

The (conceptual) table listing the non-interface specific
(S,G) state that PIM has.

pimSGEntry row .0.54.2.1.6.1

An entry (conceptual row) in the pimSGTable.

Indexes

pimSGAddressType pimSGGrpAddress pimSGSrcAddress

Column	Syntax	OID
pimSGAddressType The address type of the source and multicast group for this entry.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.6.1.1
pimSGGrpAddress The multicast group address for this entry. The InetAddressType is given by the pimSGAddressType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.6.1.2
pimSGSrcAddress The source address for this entry. The InetAddressType is given by the pimSGAddressType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.6.1.3
pimSGUpTime The time since this entry was created by the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.6.1.4
pimSGPimMode Whether pimSGGrpAddress is an SSM (Source Specific Multicast, used with PIM-SM) or ASM (Any Source Multicast, used with PIM-SM) group.	Enumeration Enumerated Values: 2 ssm 3 asm	.0.54.2.1.6.1.5
pimSGUpstreamJoinState Whether the local router should join the shortest-path tree for the source and group represented by this entry. This corresponds to the state of the upstream (S,G) state machine in the PIM-SM specification.	Enumeration Enumerated Values: 1 notJoined 2 joined	.0.54.2.1.6.1.6
pimSGUpstreamJoinTimer The time remaining before the local router next sends a periodic (S,G) Join message on pimSGRPFIfIndex. This timer is called the (S,G) Upstream Join Timer in the PIM-SM specification. This object is zero if the timer …	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.6.1.7
pimSGUpstreamNeighbor The primary address of the neighbor on pimSGRPFIfIndex that the local router is sending periodic (S,G) Join messages to. This is zero if the RPF next hop is unknown or is not a PIM neighbor. The InetAddressType is give…	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.6.1.8
pimSGRPFIfIndex The value of ifIndex for the RPF interface towards the source, or zero if the RPF interface is unknown.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.0.54.2.1.6.1.9
pimSGRPFNextHopType The address type of the RPF next hop towards the source, or unknown(0) if the RPF next hop is unknown.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.6.1.10
pimSGRPFNextHop The address of the RPF next hop towards the source. The InetAddressType is given by the pimSGRPFNextHopType. This address is called MRIB.next_hop(S) in the PIM-SM specification.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.6.1.11
pimSGRPFRouteProtocol The routing mechanism via which the route used to find the RPF interface towards the source was learned.	IANA-RTPROTO-MIBIANAipRouteProtocol Type Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp 17 dvmrp 18 rpl 19 dhcp 20 ttdp	.0.54.2.1.6.1.12
pimSGRPFRouteAddress The IP address which when combined with the corresponding value of pimSGRPFRoutePrefixLength identifies the route used to find the RPF interface towards the source. The InetAddressType is given by the pimSGRPFNextHopTy…	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.6.1.13
pimSGRPFRoutePrefixLength The prefix length which when combined with the corresponding value of pimSGRPFRouteAddress identifies the route used to find the RPF interface towards the source. The InetAddressType is given by the pimSGRPFNextHopType …	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.0.54.2.1.6.1.14
pimSGRPFRouteMetricPref The metric preference of the route used to find the RPF interface towards the source.	Unsigned32 Constraints: range: 0-2147483647	.0.54.2.1.6.1.15
pimSGRPFRouteMetric The routing metric of the route used to find the RPF interface towards the source.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.54.2.1.6.1.16
pimSGSPTBit Whether the SPT bit is set; and therefore whether forwarding is taking place on the shortest-path tree.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.6.1.17
pimSGKeepaliveTimer The time remaining before, in the absence of explicit (S,G) local membership or (S,G) Join messages received to maintain it, this (S,G) state expires. This timer is called the (S,G) Keepalive Timer in the PIM-SM specif…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.6.1.18
pimSGDRRegisterState Whether the local router should encapsulate (S,G) data packets in Register messages and send them to the RP. This corresponds to the state of the per-(S,G) Register state machine in the PIM-SM specification. This obje…	Enumeration Enumerated Values: 1 noInfo 2 join 3 joinPending 4 prune	.0.54.2.1.6.1.19
pimSGDRRegisterStopTimer If pimSGDRRegisterState is 'prune', this is the time remaining before the local router sends a Null-Register message to the RP. If pimSGDRRegisterState is 'joinPending', this is the time remaining before the local rout…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.6.1.20
pimSGRPRegisterPMBRAddressType The address type of the first PIM Multicast Border Router to send a Register message with the Border bit set. This object is unknown(0) if the local router is not the RP for the group.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.6.1.21
pimSGRPRegisterPMBRAddress The IP address of the first PIM Multicast Border Router to send a Register message with the Border bit set. The InetAddressType is given by the pimSGRPRegisterPMBRAddressType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.6.1.22
pimSGUpstreamPruneState Whether the local router has pruned itself from the tree. This corresponds to the state of the upstream prune (S,G) state machine in the PIM-DM specification. This object is used only by PIM-DM.	Enumeration Enumerated Values: 1 forwarding 2 ackpending 3 pruned	.0.54.2.1.6.1.23
pimSGUpstreamPruneLimitTimer The time remaining before the local router may send a (S,G) Prune message on pimSGRPFIfIndex. This timer is called the (S,G) Prune Limit Timer in the PIM-DM specification. This object is zero if the timer is not runni…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.6.1.24
pimSGOriginatorState Whether the router is an originator for an (S,G) message flow. This corresponds to the state of the per-(S,G) Originator state machine in the PIM-DM specification. This object is used only by PIM-DM.	Enumeration Enumerated Values: 1 notOriginator 2 originator	.0.54.2.1.6.1.25
pimSGSourceActiveTimer If pimSGOriginatorState is 'originator', this is the time remaining before the local router reverts to a notOriginator state. Otherwise, this is zero. This timer is called the Source Active Timer in the PIM-DM specifi…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.6.1.26
pimSGStateRefreshTimer If pimSGOriginatorState is 'originator', this is the time remaining before the local router sends a State Refresh message. Otherwise, this is zero. This timer is called the State Refresh Timer in the PIM-DM specificat…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.6.1.27

The (conceptual) table listing the interface-specific (S,G)
state that PIM has.

pimSGIEntry row .0.54.2.1.7.1

An entry (conceptual row) in the pimSGITable.

Indexes

pimSGAddressType pimSGGrpAddress pimSGSrcAddress pimSGIIfIndex

Column	Syntax	OID
pimSGIIfIndex The ifIndex of the interface that this entry corresponds to.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.54.2.1.7.1.1
pimSGIUpTime The time since this entry was created by the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.7.1.2
pimSGILocalMembership Whether the local router has (S,G) local membership on this interface (resulting from a mechanism such as IGMPv3 or MLDv2). This corresponds to local_receiver_include(S,G,I) in the PIM-SM specification.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.7.1.3
pimSGIJoinPruneState The state resulting from (S,G) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G) state machine in the PIM-SM and PIM-DM specification.	Enumeration Enumerated Values: 1 noInfo 2 join 3 prunePending	.0.54.2.1.7.1.4
pimSGIPrunePendingTimer The time remaining before the local router acts on an (S,G) Prune message received on this interface, during which the router is waiting to see whether another downstream router will override the Prune message. This ti…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.7.1.5
pimSGIJoinExpiryTimer The time remaining before (S,G) Join state for this interface expires. This timer is called the (S,G) Join Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value of 'FFFFFF…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.7.1.6
pimSGIAssertState The (S,G) Assert state for this interface. This corresponds to the state of the per-interface (S,G) Assert state machine in the PIM-SM specification.	Enumeration Enumerated Values: 1 noInfo 2 iAmAssertWinner 3 iAmAssertLoser	.0.54.2.1.7.1.7
pimSGIAssertTimer If pimSGIAssertState is 'iAmAssertWinner', this is the time remaining before the local router next sends a (S,G) Assert message on this interface. If pimSGIAssertState is 'iAmAssertLoser', this is the time remaining be…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.7.1.8
pimSGIAssertWinnerAddressType If pimSGIAssertState is 'iAmAssertLoser', this is the address type of the assert winner; otherwise, this object is unknown(0).	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.7.1.9
pimSGIAssertWinnerAddress If pimSGIAssertState is 'iAmAssertLoser', this is the address of the assert winner. The InetAddressType is given by the pimSGIAssertWinnerAddressType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.7.1.10
pimSGIAssertWinnerMetricPref If pimSGIAssertState is 'iAmAssertLoser', this is the metric preference of the route to the source advertised by the assert winner; otherwise, this object is zero.	Unsigned32 Constraints: range: 0-2147483647	.0.54.2.1.7.1.11
pimSGIAssertWinnerMetric If pimSGIAssertState is 'iAmAssertLoser', this is the routing metric of the route to the source advertised by the assert winner; otherwise, this object is zero.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.54.2.1.7.1.12

The (conceptual) table listing the non-interface specific
(S,G,rpt) state that PIM has.

pimSGRptEntry row .0.54.2.1.8.1

An entry (conceptual row) in the pimSGRptTable.

Indexes

pimStarGAddressType pimStarGGrpAddress pimSGRptSrcAddress

Column	Syntax	OID
pimSGRptSrcAddress The source address for this entry. The InetAddressType is given by the pimStarGAddressType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.8.1.1
pimSGRptUpTime The time since this entry was created by the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.8.1.2
pimSGRptUpstreamPruneState Whether the local router should prune the source off the RP tree. This corresponds to the state of the upstream (S,G,rpt) state machine for triggered messages in the PIM-SM specification.	Enumeration Enumerated Values: 1 rptNotJoined 2 pruned 3 notPruned	.0.54.2.1.8.1.3
pimSGRptUpstreamOverrideTimer The time remaining before the local router sends a triggered (S,G,rpt) Join message on pimStarGRPFIfIndex. This timer is called the (S,G,rpt) Upstream Override Timer in the PIM-SM specification. This object is zero if …	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.8.1.4
pimSGRptRPFNextHopType The address type of the RPF next hop towards the RP, or unknown(0) if the RPF next hop is unknown.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.8.1.5
pimSGRptRPFNextHop The address of the RPF next hop towards the RP. The InetAddressType is given by the pimStarGRPFNextHopType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.8.1.6

The (conceptual) table listing the interface-specific
(S,G,rpt) state that PIM has.

pimSGRptIEntry row .0.54.2.1.9.1

An entry (conceptual row) in the pimSGRptITable.

Indexes

pimStarGAddressType pimStarGGrpAddress pimSGRptSrcAddress pimSGRptIIfIndex

Column	Syntax	OID
pimSGRptIIfIndex The ifIndex of the interface that this entry corresponds to.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.54.2.1.9.1.1
pimSGRptIUpTime The time since this entry was created by the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.9.1.2
pimSGRptILocalMembership Whether the local router has both (*,G) include local membership and (S,G) exclude local membership on this interface (resulting from a mechanism such as IGMPv3 or MLDv2). This corresponds to local_receiver_exclude(S,G…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.9.1.3
pimSGRptIJoinPruneState The state resulting from (S,G,rpt) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (S,G,rpt) state machine in the PIM-SM specification.	Enumeration Enumerated Values: 1 noInfo 2 prune 3 prunePending 4 pruneTmp 5 prunePendingTmp	.0.54.2.1.9.1.4
pimSGRptIPrunePendingTimer The time remaining before the local router starts pruning this source off the RP tree. This timer is called the (S,G,rpt) Prune-Pending Timer in the PIM-SM specification. This object is zero if the timer is not running.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.9.1.5
pimSGRptIPruneExpiryTimer The time remaining before (S,G,rpt) Prune state for this interface expires. This timer is called the (S,G,rpt) Prune Expiry Timer in the PIM-SM specification. This object is zero if the timer is not running. A value …	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.9.1.6

The (conceptual) table listing the per-RP Designated
Forwarder (DF) Election state for each interface for all the
RPs in BIDIR mode.

pimBidirDFElectionEntry row .0.54.2.1.10.1

An entry (conceptual row) in the pimBidirDFElectionTable.

Indexes

pimBidirDFElectionAddressType pimBidirDFElectionRPAddress pimBidirDFElectionIfIndex

Column	Syntax	OID
pimBidirDFElectionAddressType The address type of the RP for which the DF state is being maintained.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.10.1.1
pimBidirDFElectionRPAddress The IP address of the RP for which the DF state is being maintained. The InetAddressType is given by the pimBidirDFElectionAddressType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.10.1.2
pimBidirDFElectionIfIndex The value of ifIndex for the interface for which the DF state is being maintained.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.54.2.1.10.1.3
pimBidirDFElectionWinnerAddressType The primary address type of the winner of the DF Election process. A value of unknown(0) indicates there is currently no DF.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.10.1.4
pimBidirDFElectionWinnerAddress The primary IP address of the winner of the DF Election process. The InetAddressType is given by the pimBidirDFElectionWinnderAddressType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.10.1.5
pimBidirDFElectionWinnerUpTime The time since the current winner (last) became elected as the DF for this RP.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.10.1.6
pimBidirDFElectionWinnerMetricPref The metric preference advertised by the DF Winner, or zero if there is currently no DF.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.54.2.1.10.1.7
pimBidirDFElectionWinnerMetric The metric advertised by the DF Winner, or zero if there is currently no DF.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.54.2.1.10.1.8
pimBidirDFElectionState The state of this interface with respect to DF-Election for this RP. The states correspond to the ones defined in the BIDIR-PIM specification.	Enumeration Enumerated Values: 1 dfOffer 2 dfLose 3 dfWinner 4 dfBackoff	.0.54.2.1.10.1.9
pimBidirDFElectionStateTimer The minimum time remaining after which the local router will expire the current DF state represented by pimBidirDFElectionState.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.10.1.10

This table is used to create and manage static
configuration of RPs.
          
If the group prefixes configured for two or more rows in
this table overlap, the row with the greatest value of
pimStaticRPGrpPrefixLength is used for the overlapping
range.

pimStaticRPEntry row .0.54.2.1.11.1

An entry (conceptual row) in the pimStaticRPTable. This
entry is preserved on agent restart.

Indexes

pimStaticRPAddressType pimStaticRPGrpAddress pimStaticRPGrpPrefixLength

Column	Syntax	OID
pimStaticRPAddressType The address type of this entry.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.11.1.1
pimStaticRPGrpAddress The multicast group address which, when combined with pimStaticRPGrpPrefixLength, gives the group prefix for this entry. The InetAddressType is given by the pimStaticRPAddressType object. This address ob…	INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16	.0.54.2.1.11.1.2
pimStaticRPGrpPrefixLength The multicast group prefix length, which, when combined with pimStaticRPGrpAddress, gives the group prefix for this entry. The InetAddressType is given by the pimStaticRPAddressType object. If pimStaticRPAddressType i…	Unsigned32r/w Constraints: range: 4-128	.0.54.2.1.11.1.3
pimStaticRPRPAddress The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the pimStaticRPAddressType object.	INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16	.0.54.2.1.11.1.4
pimStaticRPPimMode The PIM mode to be used for groups in this group prefix. If this object is set to ssm(2), then pimStaticRPRPAddress must be set to zero. No RP operations are ever possible for PIM Mode SSM.	Enumerationr/w Enumerated Values: 2 ssm 3 asm 4 bidir	.0.54.2.1.11.1.5
pimStaticRPOverrideDynamic Whether this static RP configuration overrides RP information learned dynamically for groups in this group prefix.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.11.1.6
pimStaticRPRowStatus The status of this row, by which rows in this table can be created and destroyed. This status object cannot be set to active(1) before valid values have been written to pimStaticRPRPAddress. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.0.54.2.1.11.1.7
pimStaticRPPrecedence The value for pimGroupMappingPrecedence to be used for this static RP configuration. This allows fine control over which configuration is overridden by this static configuration. If this object is presen…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.0.54.2.1.11.1.8

This table is used to create and manage Anycast-RP via PIM
Register messages, as opposed to via other protocols such as
MSDP.
          
Entries must be configured in this table if and only if the
local router is a member of one or more Anycast-RP sets,
that is, one or more Anycast-RP addresses are assigned to
the local router.  Note that if using static RP
configuration, this is in addition to, not instead of, the
pimStaticRPTable entries that must be configured for the
Anycast-RPs.
          
The set of rows with the same values of both
pimAnycastRPSetAddressType and pimAnycastRPSetAnycastAddress
corresponds to the Anycast-RP set for that Anycast-RP
address.
          
When an Anycast-RP set configuration is active, one entry
per pimAnycastRPSetAnycastAddress corresponds to the local
router.  The local router is identified by the
pimAnycastRpSetLocalRouter object.  That entry determines
the source address used by the local router when forwarding
PIM Register messages within the Anycast-RP set.

pimAnycastRPSetEntry row .0.54.2.1.12.1

An entry corresponds to a single router within a particular
Anycast-RP set. This entry is preserved on agent restart.

Indexes

pimAnycastRPSetAddressType pimAnycastRPSetAnycastAddress pimAnycastRPSetRouterAddress

Column	Syntax	OID
pimAnycastRPSetAddressType The address type of the Anycast-RP address and router address.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.12.1.1
pimAnycastRPSetAnycastAddress The Anycast-RP address. The InetAddressType is given by the pimAnycastRPSetAddressType object.	INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16	.0.54.2.1.12.1.2
pimAnycastRPSetRouterAddress The address of a router that is a member of the Anycast-RP set. The InetAddressType is given by the pimAnycastRPSetAddressType object. This address differs from pimAnycastRPSetAnycastAddress. Equal value…	INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16	.0.54.2.1.12.1.3
pimAnycastRPSetRowStatus The status of this row, by which rows in this table can be created and destroyed. There are no other other writeable columnar objects in this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.0.54.2.1.12.1.4
pimAnycastRPSetLocalRouter Whether this entry corresponds to the local router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.12.1.5

The (conceptual) table listing mappings from multicast
group prefixes to the PIM mode and RP address to use for
groups within that group prefix.
          
Rows in this table are created for a variety of reasons,
indicated by the value of the pimGroupMappingOrigin object.
          
-  Rows with a pimGroupMappingOrigin value of 'fixed' are
   created automatically by the router at startup, to
   correspond to the well-defined prefixes of link-local and
   unroutable group addresses.  These rows are never
   destroyed.
          
-  Rows with a pimGroupMappingOrigin value of 'embedded' are
   created by the router to correspond to group prefixes
   that are to be treated as being in Embedded-RP format.
          
-  Rows with a pimGroupMappingOrigin value of 'configRp' are
   created and destroyed as a result of rows in the
   pimStaticRPTable being created and destroyed.
          
-  Rows with a pimGroupMappingOrigin value of 'configSsm'
   are created and destroyed as a result of configuration of
   SSM address ranges to the local router.
          
-  Rows with a pimGroupMappingOrigin value of 'bsr' are
   created as a result of running the PIM Bootstrap Router
   (BSR) mechanism.  If the local router is not the elected
   BSR, these rows are created to correspond to group
   prefixes in the PIM Bootstrap messages received from the
   elected BSR.  If the local router is the elected BSR,
   these rows are created to correspond to group prefixes in
   the PIM Bootstrap messages that the local router sends.
   In either case, these rows are destroyed when the group
   prefixes are timed out by the BSR mechanism.
          
-  Rows with a pimGroupMappingOrigin value of 'other' are
   created and destroyed according to some other mechanism
   not specified here.
          
Given the collection of rows in this table at any point in
time, the PIM mode and RP address to use for a particular
group is determined using the following algorithm.
          
1. From the set of all rows, the subset whose group prefix
   contains the group in question are selected.
          
2. If there are no such rows, the behavior is undefined.
          
3. If there is at least one such row, from the selected
   subset of rows, the subset that have the lowest value
   of pimGroupMappingPrecedence are selected.
          
4. From the selected subset of rows, the subset that have
   the greatest value of pimGroupMappingGrpPrefixLength are
   selected.
          
5. If there are multiple selected rows, the subset that have
   the highest precedence (the lowest numerical value for
   pimGroupMappingPrecedence) are selected.
          
6. If there are multiple selected rows, the row selected is
   implementation dependent; the implementation might or
   might not apply the PIM hash function to select the row.
          
7. The group mode to use is given by the value of
   pimGroupMappingPimMode from the single selected row; the
   RP to use is given by the value of
   pimGroupMappingRPAddress, unless pimGroupMappingOrigin is
   'embedded', in which case the RP is extracted from the
   group address in question.

pimGroupMappingEntry row .0.54.2.1.13.1

An entry (conceptual row) in the pimGroupMappingTable.

Indexes

pimGroupMappingOrigin pimGroupMappingAddressType pimGroupMappingGrpAddress pimGroupMappingGrpPrefixLength pimGroupMappingRPAddressType pimGroupMappingRPAddress

Column	Syntax	OID
pimGroupMappingOrigin The mechanism by which this group mapping was learned.	PimGroupMappingOriginType Type Values: 1 fixed 2 configRp 3 configSsm 4 bsr 5 autoRP 6 embedded 7 other	.0.54.2.1.13.1.1
pimGroupMappingAddressType The address type of the IP multicast group prefix.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.13.1.2
pimGroupMappingGrpAddress The IP multicast group address which, when combined with pimGroupMappingGrpPrefixLength, gives the group prefix for this mapping. The InetAddressType is given by the pimGroupMappingAddressType object. Th…	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.13.1.3
pimGroupMappingGrpPrefixLength The multicast group prefix length, which, when combined with pimGroupMappingGrpAddress, gives the group prefix for this mapping. The InetAddressType is given by the pimGroupMappingAddressType object. If pimGroupMappin…	Unsigned32 Constraints: range: 4-128	.0.54.2.1.13.1.4
pimGroupMappingRPAddressType The address type of the RP to be used for groups within this group prefix, or unknown(0) if no RP is to be used or if the RP address is unknown. This object must be unknown(0) if pimGroupMappingPimM…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.13.1.5
pimGroupMappingRPAddress The IP address of the RP to be used for groups within this group prefix. The InetAddressType is given by the imGroupMappingRPAddressType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.13.1.6
pimGroupMappingPimMode The PIM mode to be used for groups in this group prefix.	PimMode Type Values: 1 none 2 ssm 3 asm 4 bidir 5 dm 6 other	.0.54.2.1.13.1.7
pimGroupMappingPrecedence The precedence of this row, used in the algorithm that determines which row applies to a given group address (described above). Numerically higher values for this object indicate lower precedences, with the value zero …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.54.2.1.13.1.8

The (conceptual) table listing the non-interface specific
(*,*,RP) state that PIM has.

pimStarStarRPEntry row .0.54.2.1.103.1

An entry (conceptual row) in the pimStarStarRPTable.

Indexes

pimStarStarRPAddressType pimStarStarRPAddress

Column	Syntax	OID
pimStarStarRPAddressType The address type of this RP.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.103.1.1
pimStarStarRPAddress The address of this RP.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.103.1.2
pimStarStarRPUpTime The time since this RP exists.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.103.1.3
pimStarStarRPUpstreamJoinTimer The Upstream Join/Prune Timer is used to send out periodic Join(*,*,RP) messages, and to override Prune(*,*,RP) messages from peers on an upstream LAN interface.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.103.1.4
pimStarStarRPUpstreamJoinState The upstream (*,*,RP) Join/Prune State reflects the state of the upstream (*,*,RP) state machine in the PIM-SM specification.	Enumeration Enumerated Values: 1 notJoined 2 joined	.0.54.2.1.103.1.5
pimStarStarRPUpstreamNeighborType The primary address type of the upstream neighbor, or unknown(0) if the upstream neighbor address is unknown or is not a PIM neighbor.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.0.54.2.1.103.1.6
pimStarStarRPUpstreamNeighbor The primary address of the neighbor on pimStarStarRPIfIndex. The InetAddressType is given by the pimStarStarRPUpstreamNeighborType object.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.0.54.2.1.103.1.7
pimStarStarRPLocal Whether this RP is the local router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.0.54.2.1.103.1.8

The (conceptual) table listing the interface specific
(*,*,RP) state that PIM has.

pimStarStarRPIEntry row .0.54.2.1.104.1

An entry (conceptual row) in the pimStarStarRPITable.

Indexes

pimStarStarRPAddressType pimStarStarRPAddress pimStarStarRPIIfIndex

Column	Syntax	OID
pimStarStarRPIIfIndex The ifIndex of the interface that this entry corresponds to.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.0.54.2.1.104.1.1
pimStarStarRPIUpTime The time since this entry was created by the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.104.1.2
pimStarStarRPIPrunePendingTimer	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.104.1.3
pimStarStarRPIJoinExpiryTimer	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.0.54.2.1.104.1.4
pimStarStarRPIJoinPruneState The state resulting from (*,*,RP) Join/Prune messages received on this interface. This corresponds to the state of the downstream per-interface (*,*,RP) state machine in the PIM-SM specification.	Enumeration Enumerated Values: 1 noInfo 2 join 3 prunePending	.0.54.2.1.104.1.5