BACS2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

bacsModuleTable

table

.1.3.6.1.2.1.33.5.2.5 · 1 row entry · 7 columns

Open in standard view

Uses the generex variant from /opt/observium/mibs/generex.

Command help

Walk bacsModuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BACS2-MIB' -M '/opt/observium/mibs/generex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BACS2-MIB::bacsModuleTable'

The list of battery table entries.

bacsModuleEntry row .1.3.6.1.2.1.33.5.2.5.1

An entry containing information applicable to a particular battery.

Indexes

bacsModuleIndex

Column	Syntax	OID
bacsModuleIndex The module identifier.	PositiveInteger Type Constraints: `range: 1..2147483647` Description: This data type is a non-zero and non-negative value.	`.1.3.6.1.2.1.33.5.2.5.1.1`
bacsModuleVoltage The module voltage.	0.01 voltPositiveInteger Type Constraints: `range: 1..2147483647` Description: This data type is a non-zero and non-negative value.	`.1.3.6.1.2.1.33.5.2.5.1.2`
bacsModuleTemperature The module temperature.	0.1 degrees of current temperature unitSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.2.1.33.5.2.5.1.3`
bacsModuleBypass The module bypass voltage.	0.1 percentNonNegativeInteger Type Constraints: `range: 0..2147483647` Description: This data type is a non-negative value.	`.1.3.6.1.2.1.33.5.2.5.1.4`
bacsModuleResistance The module impedance.	0.01 mOhmNonNegativeInteger Type Constraints: `range: 0..2147483647` Description: This data type is a non-negative value.	`.1.3.6.1.2.1.33.5.2.5.1.5`
bacsModuleState The module alarm flags(0x0=No Alarm, 0x1=General Alarm, 0x2=System Failure, 0x4=Voltage High Alarm, 0x8=Voltage Low Alarm, 0x10=Temperature High Alarm, 0x20=Temperature Low Alarm, 0x40=Resistor High Alarm, 0x80=Resistor…	NonNegativeInteger Type Constraints: `range: 0..2147483647` Description: This data type is a non-negative value.	`.1.3.6.1.2.1.33.5.2.5.1.6`
bacsModuleChargeLevel The battery charge level reported by the module	NonNegativeInteger Type Constraints: `range: 0..2147483647` Description: This data type is a non-negative value.	`.1.3.6.1.2.1.33.5.2.5.1.7`

bacsStringTable

table

.1.3.6.1.2.1.33.5.2.7 · 1 row entry · 7 columns

Open in standard view

Uses the generex variant from /opt/observium/mibs/generex.

Command help

Walk bacsStringTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BACS2-MIB' -M '/opt/observium/mibs/generex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BACS2-MIB::bacsStringTable'

The list of stringy table entries.

bacsStringEntry row .1.3.6.1.2.1.33.5.2.7.1

An entry containing information applicable to a particular string of batteries.

Indexes

bacsStringIndex

Column	Syntax	OID
bacsStringIndex The string identifier.	PositiveInteger Type Constraints: `range: 1..2147483647` Description: This data type is a non-zero and non-negative value.	`.1.3.6.1.2.1.33.5.2.7.1.1`
bacsStringCurrent The string current.	0.01 amperePositiveInteger Type Constraints: `range: 1..2147483647` Description: This data type is a non-zero and non-negative value.	`.1.3.6.1.2.1.33.5.2.7.1.2`
bacsStringTotalVolt The string total voltage.	0.01 voltPositiveInteger Type Constraints: `range: 1..2147483647` Description: This data type is a non-zero and non-negative value.	`.1.3.6.1.2.1.33.5.2.7.1.3`
bacsStringAverageVolt The string average voltage per battery.	0.01 voltPositiveInteger Type Constraints: `range: 1..2147483647` Description: This data type is a non-zero and non-negative value.	`.1.3.6.1.2.1.33.5.2.7.1.4`
bacsStringCurrentAC The string AC current.	0.01 amperePositiveInteger Type Constraints: `range: 1..2147483647` Description: This data type is a non-zero and non-negative value.	`.1.3.6.1.2.1.33.5.2.7.1.5`
bacsStringAlarm The BACS String Alarm Flags(0x0=No Alarm, 0x1=General Alarm, 0x2=System Failure, 0x4=Voltage High Alarm, 0x8=Voltage Low Alarm, 0x10=Temperature High Alarm, 0x20=Temperature Low Alarm, 0x40=Resistor High Alarm, 0x80=Res…	HEX flagsNonNegativeInteger Type Constraints: `range: 0..2147483647` Description: This data type is a non-negative value.	`.1.3.6.1.2.1.33.5.2.7.1.6`
bacsStringAlarm2 The BACS String Alarm2 Flags(0x0=No Alarm, 0x1=Current Sensor High, 0x2=Current Sensor Low, 0x4=Current Sensor High Warning, 0x8=Current Sensor Low Warning, 0x10=Equalizing Cut Off, 0x20=Current Deviation Discharge, 0x4…	HEX flagsNonNegativeInteger Type Constraints: `range: 0..2147483647` Description: This data type is a non-negative value.	`.1.3.6.1.2.1.33.5.2.7.1.7`

bacsAlarmTable

table

.1.3.6.1.2.1.33.5.3.2 · 1 row entry · 3 columns

Open in standard view

Uses the generex variant from /opt/observium/mibs/generex.

Command help

Walk bacsAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BACS2-MIB' -M '/opt/observium/mibs/generex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BACS2-MIB::bacsAlarmTable'

A list of alarm entries.

bacsAlarmEntry row .1.3.6.1.2.1.33.5.3.2.1

An entry containing information applicable to a particular alarm.

Indexes

bacsAlarmId

Column	Syntax	OID
bacsAlarmId A unique identifier for an alarm condition. This value must remain constant.	PositiveInteger Type Constraints: `range: 1..2147483647` Description: This data type is a non-zero and non-negative value.	`.1.3.6.1.2.1.33.5.3.2.1.1`
bacsAlarmDescr A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm condition.	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	`.1.3.6.1.2.1.33.5.3.2.1.2`
bacsAlarmTime The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of dcAlarmTime shall equal 0.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	`.1.3.6.1.2.1.33.5.3.2.1.3`

rauxTable

table

.1.3.6.1.2.1.33.5.5.2 · 1 row entry · 17 columns

Open in standard view

Uses the generex variant from /opt/observium/mibs/generex.

Command help

Walk rauxTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BACS2-MIB' -M '/opt/observium/mibs/generex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BACS2-MIB::rauxTable'

The list of GX_R_AUX values.

rauxEntry row .1.3.6.1.2.1.33.5.5.2.1

An entry containing information applicable to a particular GX_R_AUX device.

Indexes

rauxIndex

Column Syntax OID

rauxIndex

The GX_R_AUX identifier.

PositiveInteger

Type Constraints:
range: 1..2147483647

Description:

This data type is a non-zero and non-negative value.

.1.3.6.1.2.1.33.5.5.2.1.1

rauxInput1

Value of Input 1

Enumeration

Enumerated Values:

0	normal
1	alarm

.1.3.6.1.2.1.33.5.5.2.1.2

rauxInName1

Name of Input 1

SNMPv2-TCDisplayString

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.2.1.33.5.5.2.1.3

rauxInput2

Value of Input 2

Enumeration

Enumerated Values:

0	normal
1	alarm

.1.3.6.1.2.1.33.5.5.2.1.4

rauxInName2

Name of Input 2

SNMPv2-TCDisplayString

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.2.1.33.5.5.2.1.5

rauxInput3

Value of Input 3

Enumeration

Enumerated Values:

0	normal
1	alarm

.1.3.6.1.2.1.33.5.5.2.1.6

rauxInName3

Name of Input 3

SNMPv2-TCDisplayString

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.2.1.33.5.5.2.1.7

rauxInput4

Value of Input 4

Enumeration

Enumerated Values:

0	normal
1	alarm

.1.3.6.1.2.1.33.5.5.2.1.8

rauxInName4

Name of Input 4

SNMPv2-TCDisplayString

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.2.1.33.5.5.2.1.9

rauxOutput1

Value of Output 1

Enumeration

Enumerated Values:

0	normal
1	alarm

.1.3.6.1.2.1.33.5.5.2.1.10

rauxOutName1

Name of Output 1

SNMPv2-TCDisplayString

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.2.1.33.5.5.2.1.11

rauxOutput2

Value of Output 2

Enumeration

Enumerated Values:

0	normal
1	alarm

.1.3.6.1.2.1.33.5.5.2.1.12

rauxOutName2

Name of Output 2

SNMPv2-TCDisplayString

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.2.1.33.5.5.2.1.13

rauxOutput3

Value of Output 3

Enumeration

Enumerated Values:

0	normal
1	alarm

.1.3.6.1.2.1.33.5.5.2.1.14

rauxOutName3

Name of Output 3

SNMPv2-TCDisplayString

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.2.1.33.5.5.2.1.15

rauxOutput4

Value of Output 4

Enumeration

Enumerated Values:

0	normal
1	alarm

.1.3.6.1.2.1.33.5.5.2.1.16

rauxOutName4

Name of Output 4

SNMPv2-TCDisplayString

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.2.1.33.5.5.2.1.17